Download or read book Dynamics and Control of Wastewater Systems Second Edition written by Michae Barnett and published by CRC Press. This book was released on 1998-07-20 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE PREFACE Dynamic modeling, computer simulation, and modern control systems are valuable tools for use in both the design and operation of dynamic systems. From the "tools" point of view, this book is designed to show practicing engineers how to develop models capable of describing dynamic behavior and how to "solve" these models using computer simulation. The basic principles of process control are also presented so that the effects of different control systems on dynamic behavior can be established by computer simulation.
Download or read book Dynamics and Control of Wastewater Systems Second Edition written by Michae Barnett and published by CRC Press. This book was released on 1998-07-20 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE PREFACE Dynamic modeling, computer simulation, and modern control systems are valuable tools for use in both the design and operation of dynamic systems. From the "tools" point of view, this book is designed to show practicing engineers how to develop models capable of describing dynamic behavior and how to "solve" these models using computer simulation. The basic principles of process control are also presented so that the effects of different control systems on dynamic behavior can be established by computer simulation.
Download or read book Upgrading Wastewater Treatment Plants Second Edition written by Glen T. Daigger and published by CRC Press. This book was released on 1998-06-09 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE PREFACE In this time of dwindling budgets, increasing service needs, and increasing regulatory requirements, wastewater treatment professionals are continually called upon to upgrade their wastewater treatment plants. To do so efficiently and effectively, one must develop a clear approach to use in upgrading a plant and have the proper tools available to implement that approach. This book is meant to assist readers in developing and implementing their upgrading projects. First, Chapter 1 details the upgrading approach. The tools to be used are presented in Chapters 2 through 6. Finally, in Chapter 7, six case histories are presented to illustrate the plant upgrading techniques presented in the previous chapters. Through this book, the authors hope to assist readers in meeting their upgrade requirements, while making the most efficient use of the resources at hand.
Download or read book Design and Retrofit of Wastewater Treatment Plants for Biological Nutritient Removal written by Clifford W. Randall and published by CRC Press. This book was released on 1998-05-06 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents information that can be used for the design and operation of wastewater treatment plants that utilize biological nutrient removal processes, i.e., processes that utilize biological mechanisms instead of chemical mechanisms, to remove phosphorus and nitrogen from wastewaters. The book provides: basic fundamentals, concepts, and theories; design of prefermentation units, various types of BNR systems, and secondary clarifiers; retrofitting conventional activated sludge plants; modeling considerations; and special considerations for BNR systems. It includes full-scale and pilot plant case histories, design examples, and retrofit of existing plants.
Download or read book Dynamical Modelling Estimation in Wastewater Treatment Processes written by D. Dochain and published by IWA Publishing. This book was released on 2001-12-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental quality is becoming an increasing concern in our society. In that context, waste and wastewater treatment, and more specifically biological wastewater treatment processes play an important role. In this book, we concentrate on the mathematical modelling of these processes. The main purpose is to provide the increasing number of professionals who are using models to design, optimise and control wastewater treatment processes with the necessary background for their activities of model building, selection and calibration. The book deals specifically with dynamic models because they allow us to describe the behaviour of treatment plants under the highly dynamic conditions that we want them to operate (e.g. Sequencing Batch Reactors) or we have to operate them (e.g. storm conditions, spills). Further extension is provided to new reactor systems for which partial differential equation descriptions are necessary to account for their distributed parameter nature (e.g. settlers, fixed bed reactors). The model building exercise is introduced as a step-wise activity that, in this book, starts from mass balancing principles. In many cases, different hypotheses and their corresponding models can be proposed for a particular process. It is therefore essential to be able to select from these candidate models in an objective manner. To this end, structure characterisation methods are introduced. Important sections of the book deal with the collection of high quality data using optimal experimental design, parameter estimation techniques for calibration and the on-line use of models in state and parameter estimators. Contents Dynamical Modelling Dynamical Mass Balance Model Building and Analysis Structure Characterisation (SC) Structural Identifiability Practical Identifiability and Optimal Experiment Design for Parameter Estimation (OED/PE) Estimation of Model Parameters Recursive State and Parameter Estimation Glossary Nomenclature
Download or read book Wastewater Reclamation and Reuse written by Takashi Asano and published by CRC Press. This book was released on 1998-06-15 with total page 1570 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effective integration of water and reclaimed wastewater still requires close examination of public health issues, infrastructure and facilities planning, wastewater treatment plant siting, treatment process reliability, economic and financial analyses, and water utility management. This book assembles, analyzes, and reviews the various aspects of wastewater reclamation, recycling, and reuse in most parts of the world. It considers the effective integration of water and reclaimed wastewater, public health issues, infrastructure and facilities planning, waste-water treatment plant siting, treatment process reliability, economic and financial analysis, and water utility management.
Download or read book Municipal Sewage Sludge Management written by Cecil Lue-Hing and published by CRC Press. This book was released on 1998-05-27 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE PREFACE This textbook explains and discusses many of the unit operations used for processing municipal sewage sludge. It also contains valuable information on the available methods for final disposition of this sludge. This textbook can be used for planning, designing, and implementing municipal sewage sludge management projects.
Download or read book Aeration written by James Mueller and published by CRC Press. This book was released on 2002-02-27 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The immense environmental challenges facing the world now and in years to come can only be met through marshalling the talents of the best environmental engineers and scientists, and through the use of innovative, cost-effective solutions. Written by three leading aeration experts, Aeration: Principles and Practice, covers the principles and practi
Download or read book Wastewater Treatment Systems written by Gustaf Olsson and published by IWA Publishing. This book was released on 1999-05-31 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book for those operating and studying biological wastewater treatment plants. It introduces the state-of-the-art in process systems analysis (modelling and simulation, monitoring and diagnosis, process control and instrumentation) and in particular its application to wastewater treatment. While the emphasis is on biological nutrient removal, there is discussion of anaerobic treatment, and the principles apply to any treatment process. For the computer literate there is also a collection of MATLAB programs and functions that are mentioned throughout the book. They will run on both the professional and student editions of MATLAB Version 5. Contents Modelling Plant Dynamics, Basic Modelling, Advanced Modelling Empirical or Black-Box Models, Experiments and Data Screening, Principles of Parameter Estimation, Fitting and Validating Models, Simulators Diagnosis Diagnosis - an Introduction, Quality Management, Model Based Diagnosis, Knowledge Based Systems Control Goals and Strategies, Disturbances Manipulated Variables, Feedback Control, Model Based Control, Batch Plant Control, Plant Wide Control, Benefit Studies Instrumentation Primary Sensors, Analysers Actuators and Controllers The Future
Download or read book Wastewater Treatment Process Modeling Second Edition MOP31 written by Water Environment Federation and published by McGraw Hill Professional. This book was released on 2013-09-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Most Complete, Up-to-Date Guide to Process Modeling Methods and Protocols Fully revised to cover the latest advances in the field, Wastewater Treatment Process Modeling, Second Edition, explains general modeling concepts and terminology and offers practical details on how to use process models for the design and operation of small, medium, and large water resource recovery facilities. This Water Environment Federation manual describes each step of the modeling process, including the fundamental math required, overviews of existing models and when to use them, modeling protocols, and how to interpret data. The detailed information in this authoritative volume helps to ensure that process models are developed, used, and documented correctly. Coverage includes: History of process modeling Modeling fundamentals Unit process model descriptions Process modeling tools Dedicated experiments and tools Overview of available modeling and simulation protocols Project definition Building a facility model Using models for design, optimization, and control
Download or read book Control and Instrumentation for Wastewater Treatment Plants written by Reza Katebi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology impacts all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies..., new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. The environmental aspects of all of our society’s activities are extremely important if the countryside; the sea and wildernesses are to be fully enjoyed by future generations. Urban waste in all its manifestations presents a particularly difficult disposal problem, which must be tackled conscientiously to prevent long lasting damage to the environment. Technological solutions should be seen as part of the available options. In this monograph, the authors M. R. Katebi, M. A. Johnson and J. Wilkie seek to introduce a comprehensive technological framework to the particular measurement and control problems of wastewater processing plants. Of course the disposal of urban sewage is a long-standing process but past solutions have used options (disposal at sea) which are no longer acceptable. Thus to meet new effluent regulations it is necessary to develop a new technological paradigm based on process control methods, and this is what the authors attempt to provide.
Download or read book Treatment Wetlands written by Robert H. Kadlec and published by CRC Press. This book was released on 2008-07-22 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated, Treatment Wetlands, Second Edition is still the most comprehensive resource available for the planning, design, and operation of wetland treatment systems. The book addresses the design, construction, and operation of wetlands for water pollution control. It presents the best current procedures for sizing these syste
Download or read book Instrumentation Control and Automation in Wastewater Systems written by Gustaf Olsson and published by IWA Publishing. This book was released on 2005-04-30 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation, control and automation (ICA) in wastewater treatment systems is now an established and recognised area of technology in the profession. There are obvious incentives for ICA, not the least from an economic point of view. Plants are also becoming increasingly complex which necessitates automation and control. Instrumentation, Control and Automation in Wastewater Systems summarizes the state-of-the-art of ICA and its application in wastewater treatment systems and focuses on how leading-edge technology is used for better operation. The book is written for: The practising process engineer and the operator, who wishes to get an updated picture of what is possible to implement in terms of ICA; The process designer, who needs to consider the couplings between design and operation; The researcher or the student, who wishes to get the latest technological overview of an increasingly complex field. There is a clear aim to present a practical ICA approach, based on a technical and economic platform. The economic benefit of different control and operation possibilities is quantified. The more qualitative benefits, such as better process understanding and more challenging work for the operator are also described. Several full-scale experiences of how ICA has improved economy, ease of operation and robustness of plant operation are presented. The book emphasizes both unit process control and plant wide operation. Scientific & Technical Report No. 15
Download or read book Model Predictive Control of Wastewater Systems written by Carlos Ocampo-Martinez and published by Springer Science & Business Media. This book was released on 2010-10-01 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies ..., new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. The water and wastewater industry has undergone many changes in recent years. Of particular importance has been a renewed emphasis on improving resource management with tighter regulatory controls setting new targets on pricing, industry efficiency and loss reduction for both water and wastewater with more stringent environmental discharge conditions for wastewater. Meantime, the demand for water and wastewater services grows as the population increases and wishes for improved living conditions involving, among other items, domestic appliances that use water. Consequently, the installed infrastructure of the industry has to be continuously upgraded and extended, and employed more effectively to accommodate the new demands, both in throughput and in meeting the new regulatory conditions. Investment in fixed infrastructure is capital-intensive and slow to come on-stream. One outcome of these changes and demands is that the industry is examining the potential benefits of, and in many cases using, more advanced control systems.
Download or read book Natural Wastewater Treatment Systems Second Edition written by Ronald W. Crites and published by CRC Press. This book was released on 2014-03-14 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Calling for ecologically and economically sound wastewater treatment systems, the authors of Natural Wastewater Treatment Systems explore the use of wetlands, sprinkler or deep irrigation, groundwater recharge, and other natural systems as sustainable methods for the treatment and management of wastewater. Based on work by prominent experts in natural waste treatment, this text provides a thorough explanation on how soil and plants can successfully sustain microbial populations in the treatment of wastewater. Determining that natural systems cost less to construct and operate, and require less energy than mechanical treatment alternatives, this book also explains how these processes produce lower amounts of residual solids, and use little or no chemicals. What’s New in the Second Edition: This revised edition includes current design and regulatory and operational developments in the natural wastewater treatment field. It provides detailed examples and analyses along with significant operational data in each chapter. It also considers how processes provide passive treatment with a minimum of mechanical elements, and describes new approaches to partially mixed ponds, including dual-powered aeration ponds. Introduces the planning procedures and treatment mechanisms responsible for treatment in ponds, wetlands, land application, and soil absorption systems Provides new case studies of constructed wetlands and water reuse systems Presents design criteria and methods of pond treatment and pond effluent upgrading Describes constructed wetlands design procedures, process applications, treatment performance data, and land treatment concepts and design equations Includes information on constituents of emerging concern (CEC) and their fate in natural systems The text discusses wastewater pond systems, free water surface constructed wetlands, subsurface and vertical flow constructed wetlands, land treatment, sludge management, and onsite wastewater systems. It describes residuals and biosolids management, including nitrogen removal pretreatment methods, and uses U.S. customary and metric units in all chapters. It presents case studies of new applications of natural systems and includes worked examples of design equations for ponds and land treatment. It also provides a biosolids regulatory update from a top EPA scientist, and algae reduction technologies for ponds and wetlands. Designed for practicing wastewater engineers and scientists involved in the planning, design, and operation of ponds, wetlands, land treatment, biosolids, and onsite soil-based treatment systems, the book integrates many natural treatment systems into one single source.
Download or read book Modelling Simulation and Control of Urban Wastewater Systems written by Manfred Schütze and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: by Professor Poul Harremoes Environmental engineering has been a discipline dominated by empirical approaches to engineering. Historically speaking, the development of urban drainage structures was very successful on the basis of pure empiricism. Just think of the impressive structures built by the Romans long before the discipline of hydraulics came into being. The fact is that the Romans did not know much about the theories of hydraulics, which were discovered as late as the mid-1800s. However, with the Renaissance came a new era. Astronomy (Galileos) and basic physics (Newton) started the scientific revolution and in the mid-1800s Navier and Stokes developed the application of Newtons laws to hydrodynamics, and later, St. Venant the first basic physics description of the motion of water in open channels. The combination of basic physical understanding of the phenomena involved in the flow of water in pipes and the experience gained by "trial and error", the engineering approach to urban drainage improved the design and performance of the engineering drainage infrastructure. However, due to the mathematical complications of the basic equations, solutions were available only to quite simple cases of practical significance until the introduction of new principles of calculation made possible by computers and their ability to crunch numbers. Now even intricate hydraulic phenomena can be simulated with a reasonable degree of confidence that the simulations are in agreement with performance in practice, if the models are adequately calibrated with sample performance data.
Download or read book Water and Wastewater Engineering Design Principles and Practice Second Edition written by Mackenzie L. Davis and published by McGraw Hill Professional. This book was released on 2019-10-04 with total page 1349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. A Fully Updated, In-Depth Guide to Water and Wastewater Engineering Thoroughly revised to reflect the latest advances, procedures, and regulations, this authoritative resource contains comprehensive coverage of the design and construction of municipal water and wastewater facilities. Written by an environmental engineering expert and seasoned academic, Water and Wastewater Engineering: Design Principles and Practice, Second Edition, offers detailed explanations, practical strategies, and design techniques as well as hands-on safety protocols and operation and maintenance procedures. You will get cutting-edge information on water quality standards, corrosion control, piping materials, energy efficiency, direct and indirect potable reuse, and more. Coverage includes: • The design and construction processes • General water supply design considerations • Intake structures and wells • Chemical handling and storage • Coagulation and flocculation • Lime-soda and ion exchange softening • Reverse osmosis and nanofiltration • Sedimentation • Granular and membrane filtration • Disinfection and fluoridation • Removal of specific constituents • Water plant residuals management, process selection, and integration • Storage and distribution systems • Wastewater collection and treatment design considerations • Sanitary sewer design • Headworks and preliminary treatment • Primary treatment • Wastewater microbiology • Secondary treatment by suspended growth biological processes • Secondary treatment by attached growth and hybrid biological processes • Tertiary treatment • Advanced oxidation processes • Direct and indirect potable reuse