Download or read book Dynamics and Control of Light Weight Flexible Manipulators written by Amor Jnifene and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current robot manipulators are controlled using methods that do not take into account the links and joints flexibility. Consequently, tasks are usually carried in a slow fashion. The objective of this research is to improve the performance of light weight flexible manipulators by developing dynamic models and control strategies that include the effects of the links flexibility. Toward achieving this objective, the dynamic model of a single link flexible manipulator has been developed. Two hermit cubic functions are used in conjunction with the deflection and the slope at the tip of the link in order to express the deflection at any point along the link. The model is used to simulate the response of the single link manipulator and its ability to follow various trajectories under collocated control. Even though collocated control such as the computed torque method leads to asymptotic stability in the case of rigid link manipulators, the end point of the single link flexible manipulator has shown sustained oscillations under this type of control. In order to improve the performance of the single link and reduce the tip deflection, dynamic stiffening has been added to the link by using the angular position of a point along the link as the controlled variable. This control method is referred to as the non collocated control. Simulations of the robot motion under non collocated control has shown a significant reduction in the position error of the end point. In order to increase the damping of the flexible link, a new approach referred to as the Computed Torque/Delayed Deflection (CTDD) has been used. The CTDD approach combines the non collocated control with a delayed deflection at the point being used for non collocation feedback. The fastest decay in the end point vibrations was obtained when the delay time is selected to be half the period of the lowest frequency in the system. The CTDD has been extended to the case of a two link flexible manipulator. Simulations results for the tracking performance of the two link flexible manipulator have been carried out using two paths: A straight line path and a four points path. The advantages of using the CTDD approach are outlined by comparing its performance to those of a collocated control (computed torque method) and the non collocated control.

Download or read book Dynamics and Control of a Rigid flexible Manipulator written by Chun-tien Yeh and published by . This book was released on 1992 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of high-speed, light-weight robotic manipulators is a challenge because of their special dynamic characteristics. In this work, a two-stage control algorithm for the position control of flexible manipulators is proposed. First, the more complex, flexible robot system is replaced by a simplified hypothetical rigid body system (HRRA) with off-line trajectory planning. This reduces the complexity of the controller design for the flexible robotic arm. A parameter-optimization approach was adopted to minimize the difference between these two models in this stage. Also, a comparison of computational efficiency is made among the methods of calculus-of-variations, dynamic-programming, and the proposed parameter-optimization. At the second stage, simple linear state feedback controllers, based on the simplified hypothetical rigid body model, are proposed to control the actual robotic system. With the feedback gains selected properly by the pole-placement and linear quadratic methods, the results show satisfactory achievement of the motion objectives. The algorithm is implemented for a two-link rigid/flexible robotic arm, and the results indicate that the procedure is capable of providing effective control with much simpler computational requirements than those of procedures published previously.

Download or read book Dynamic Analysis and Control of Light Weight Manipulators with Flexible Parallel Link Mechanisms written by Jeh Won Lee and published by . This book was released on 1990 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamics of Controlled Mechanical Systems written by Gerhard Schweitzer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many mechanical systems are actively controlled in order to improve their dynamic performance. Examples are elastic satellites, active vehicle suspension systems, robots, magnetic bearings, automatic machine tools. Problems that are typical for mechanical systems arise in the following areas: - Modeling the mechanical system in such a way that the model is suitable for control design - Designing multivariable controls to be robust with respect to parameter variations and uncertainties in system order of elastic structures - Fast real-time signal processing - Generating high dynamic control forces and providing the necessary control power - Reliability and safety concepts, taking into account the growing role of software within the system The objective of the Symposium has been to present methods that contribute to the solutions of such problems. Typical examples are demonstrating the state of the art It intends to evalua~ the limits of performance that can be achieved by controlling the dynamics, and it should point to gaps in present research and areas for future research. Mainly, it has brought together leading experts from quite different areas presenting their points of view. The International Union of Theoretical and Applied Mechanics (lUTAM) has initiated and sponsored, in cooperation with the International Federation of Automatic Control (IF AC), this Symposium on Dynamics of Controlled Mechanical Systems, held at the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland, May 3D-June 3, 1988.

Download or read book Space Robotics Dynamics and Control written by Yangsheng Xu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotic technology offers two potential benefits for future space exploration. One benefit is minimizing the risk that astronauts face. The other benefit is increasing their productivity. Realizing the benefits of robotic technology in space will require solving several problems which are unique and now becoming active research topics. One of the most important research areas is dynamics, control, motion and planning for space robots by considering the dynamic interaction between the robot and the base (space station, space shuttle, or satellite). Any inefficiency in the planning and control can considerably risk by success of the space mission. Space Robotics: Dynamics and Control presents a collection of papers concerning fundamental problems in dynamics and control of space robots, focussing on issues relevant to dynamic base/robot interaction. The authors are all pioneers in theoretical analysis and experimental systems development of space robot technology. The chapters are organized within three problem areas: dynamics problems, nonholonomic nature problems, and control problems. This collection provides a solid reference for researchers in robotics, mechanics, control, and astronautical science.

Download or read book Dynamics and Control of Flexible Manipulators written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Parasitic Phenomena in the Dynamics of Industrial Devices written by Alberto Borboni and published by CRC Press. This book was released on 2011-10-06 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the real world the dynamic behavior of a real machine presents either unforeseen or limiting phenomena: both are undesired, and can be therefore be classified as parasitic phenomena — unwanted, unforeseen, or limiting behaviors. Parasitic Phenomena in the Dynamics of Industrial Devices describes the potential causes and effects of these behaviors and provides indications that could minimize their influence on the mechanical system in question. The authors introduce the phenomena and explore them through real cases, avoiding academic introductions, but inserting the entire academic and experimental knowledge that is useful to understand and solve real-world problems. They then examine these parasitic phenomena in the machine dynamics, using two cases that cover the classical cultural division between cam devices and mechanisms. They also present concrete cases with an amount of experimental data higher than the proposed ones and with a modern approach that can be applied to various mechanical devices, acquiring real knowledge superior to one of the mere finite element systems or collections of mechanical devices. Organizes machine dynamics through systems theory to give a comprehensive vision of the design problem Details machine dynamics at an advanced mathematics level and avoids redundancy of fundamental knowledge Introduces real machine cases for solutions to practical problems Covers two broad classes of mechanical devices that are widely used in the construction of instrumental goods Employs a mechatronic approach that can be applied to electro-mechanical, hydro-mechanical, or pneumo-mechanical machines Highlighting industrial devices in the manufacturing industry, including industrial indexing devices and industrial robots, the book offers case studies, advanced models, design methods, and short examples of applications. It is of critical importance for any manufacturing enterprise that produces significant amounts of objects through a process with one or more automated phases.

Download or read book Distributed Parameter Modeling and Boundary Control of Flexible Manipulators written by Jinkun Liu and published by Springer. This book was released on 2018-04-16 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book investigates fundamental issues in flexible manipulator systems, including distributed parameter modeling and boundary controller design. It presents theoretical explorations of several fundamental problems concerning the dynamics and control of these systems. By integrating fresh concepts and results to form a systematic approach to control, it also provides a basic theoretical framework. In turn, the book offers a comprehensive treatment of flexible manipulator systems, addressing topics ranging from related distributed parameter modeling and advanced boundary controller design for these systems with input constraint, to active control with output constraint. In brief, the book addresses dynamical analysis and control design for flexible manipulator systems. Though primarily intended for researchers and engineers in the control system and mechanical engineering community, it can also serve as supplemental reading on the modeling and control of flexible manipulator systems at the postgraduate level.

Download or read book PDE Modeling and Boundary Control for Flexible Mechanical System written by Zhijie Liu and published by Springer Nature. This book was released on 2020-03-16 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive review of fundamental issues in the dynamical modeling and vibration control design for several flexible mechanical systems, such as flexible satellites, flexible aerial refueling hoses, and flexible three-dimensional manipulators. Offering an authoritative reference guide to the dynamics and control of flexible mechanical systems, it equips readers to solve a host of problems concerning these systems. It provides not only a complete overview of flexible systems, but also a better understanding of the technical levels involved. The book is divided into ten chapters: Chapters 1 and 2 lay the foundations, while the remaining chapters explore several independent yet related topics in detail. The book’s final chapter presents conclusions and recommendations for future research. Given its scope, the book is intended for researchers, graduate students, and engineers whose work involves control systems, flexible mechanical systems, and related areas.

Download or read book Dynamics and Control of a Nonlinear Flexible Manipulator written by Lawrence Stephen Ward and published by . This book was released on 1986 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Theory of Robot Control written by Carlos Canudas de Wit and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study of the latest research results in the theory of robot control, structured so as to echo the gradual development of robot control over the last fifteen years. In three major parts, the editors deal with the modelling and control of rigid and flexible robot manipulators and mobile robots. Most of the results on rigid robot manipulators in part I are now well established, while for flexible manipulators in part II, some problems still remain unresolved. Part III deals with the control of mobile robots, a challenging area for future research. The whole is rounded off with an appendix reviewing basic definitions and the mathematical background for control theory. The particular combination of topics makes this an invaluable source of information for both graduate students and researchers.

Download or read book Robot Control 1988 SYROCO 88 written by U. Rembold and published by Elsevier. This book was released on 2014-05-23 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing 88 papers, the emphasis of this volume is on the control of advanced robots. These robots may be self-contained or part of a system. The applications of such robots vary from manufacturing, assembly and material handling to space work and rescue operations. Topics presented at the Symposium included sensors and robot vision systems as well as the planning and control of robot actions. Main topics covered include the design of control systems and their implementation; advanced sensors and multisensor systems; explicit robot programming; implicit (task-orientated) robot programming; interaction between programming and control systems; simulation as a programming aid; AI techniques for advanced robot systems and autonomous robots.

Download or read book Advanced Studies of Flexible Robotic Manipulators written by Fei-Yue Wang and published by World Scientific. This book was released on 2003 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible robotic manipulators pose various challenges in research as compared to rigid robotic manipulators, ranging from system design, structural optimization, and construction to modeling, sensing, and control. Although significant progress has been made in many aspects over the last one-and-a-half decades, many issues are not resolved yet, and simple, effective, and reliable controls of flexible manipulators still remain an open quest. Clearly, further efforts and results in this area will contribute significantly to robotics (particularly automation) as well as its application and education in general control engineering. To accelerate this process, the leading experts in this important area present in this book the state of the art in advanced studies of the design, modeling, control and applications of flexible manipulators. Sample Chapter(s). Chapter 1: Flexible-link Manipulators: Modeling, Nonlinear Control and Observer (235 KB). Contents: Flexible-Link Manipulators: Modeling, Nonlinear Control and Observer (M A Arteaga & B Siciliano); Energy-Based Control of Flexible Link Robots (S S Ge); Trajectory Planning and Compliant Control for Two Manipulators to Deform Flexible Materials (O Al-Jarrah et al.); Force Control of Flexible Manipulators (F Matsuno); Experimental Study on the Control of Flexible Link Robots (D Wang); Sensor Output Feedback Control of Flexible Robot Arms (Z-H Luo); On GA Based Robust Control of Flexible Manipulators (Z-Q Xiao & L-L Cui); Analysis of Poles and Zeros for Tapered Link Designs (D L Girvin & W J Book); Optimum Shape Design of Flexible Manipulators with Tip Loads (J L Russell & Y-Q Gao); Mechatronic Design of Flexible Manipulators (P-X Zhou & Z-Q Xiao); A Comprehensive Study of Dynamic Behaviors of Flexible Robotic Links: Modeling and Analysis (Y-Q Gao & F-Y Wang). Readership: Researchers, lecturers and graduate students in robotics & automated systems, electrical & electronic engineering, and industrial engineering

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamics and Control of Flexible Manipulators written by Jeries Jacob Abou-Hanna and published by . This book was released on 1986 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vibration Reduction for Flexible Structures by Smoothing Commands written by Jie Huang and published by Lulu.com. This book was released on 2020-01-04 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book described vibration reduction for flexible structures by the command smoothing techniques. The Command smoothing technique is a kind of open-loop controller. The operator's commands filter through a piecewise continuous function, called smoother, to produce smoothed commands. Smoothed commands move flexible dynamic systems toward desired positions with minimal oscillations. Five types of command smoother were reported including one-piece, two-pieces, three-pieces, and four-pieces smoothers, and the smoother for multi-mode Duffing oscillators. All smoothers are robust to changes in the system parameters and working conditions. The command smoothing technique has been successfully applied to industrial cranes, sloshing suppression, flexible manipulators, high-speed cam and follower systems, and helicopter slung loads.

Download or read book Dynamics and Control of Robotic Manipulators with Contact and Friction written by Shiping Liu and published by John Wiley & Sons. This book was released on 2019-02-11 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to the friction, contact and impact on robot control and force feedback mechanism Dynamics and Control of Robotic Manipulators with Contact and Friction offers an authoritative guide to the basic principles of robot dynamics and control with a focus on contact and friction. The authors discuss problems in interaction between human and real or virtual robot where dynamics with friction and contact are relevant. The book fills a void in the literature with a need for a text that considers the contact and friction generated in robot joints during their movements. Designed as a practical resource, the text provides the information needed for task planning in view of contact, impact and friction for the designer of a robot control system for high accuracy and long durability. The authors include a review of the most up-to-date advancements in robot dynamics and control. It contains a comprehensive resource to the effective design and fabrication of robot systems and components for engineering and scientific purposes. This important guide: Offers a comprehensive reference with systematic treatment and a unified framework Includes simulation and experiments used in dynamics and control of robot considering contact, impact and friction Discusses the most current tribology methodology used to treat the multiple–scale effects Contains valuable descriptions of experiments and software used Presents illustrative accounts on the methods employed to handle friction in the closed loop, including the principles, implementation, application scope, merits and demerits Offers a cohesive treatment that covers tribology and multi-scales, multi-physics and nonlinear stochastic dynamics control Written for graduate students of robotics, mechatronics, mechanical engineering, tracking control and practicing professionals and industrial researchers, Dynamics and Control of Robotic Manipulators with Contact and Friction offers a review to effective design and fabrication of stable and durable robot system and components.