Download or read book Simulations of RF Beam Manipulations Including Intensity Effects for CERN PSB and SPS Upgrades written by Danilo Quartullo and published by Sapienza Università Editrice. This book was released on 2022-11-30 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The LIU program at CERN is of paramount importance at international level. The program foresees a significant upgrade of the LHC injector chain to increase the luminosity of the LHC beam by a factor of ten after 2024, when the HL-LHC era will start. This thesis deals with longitudinal beam dynamics studies for two LHC injectors (PSB and SPS), the main goal being the analysis of beam instabilities in the HL-LHC scenario.

Download or read book Metallurgy and Design of Alloys with Hierarchical Microstructures written by Krishnan K. Sankaran and published by Elsevier. This book was released on 2017-06-14 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications. - Discusses the science behind the properties and performance of advanced metallic materials - Provides for the efficient design of materials and processes to satisfy targeted performance in materials and structures - Enables the selection and development of new alloys for specific applications based upon evaluation of their microstructure as illustrated in this work

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1988 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cumulative Index to Transactions of the ASME written by American Society of Mechanical Engineers and published by . This book was released on 1971 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Indexes the journals which continue American Society of Mechanical Engineers. Transactions. and which are also called: Series A- of the Transactions of the American Society of Mechanical Engineers.

Download or read book Intense Dynamic Loading Of Condensed Matter written by A. V. Bushman and published by CRC Press. This book was released on 1992-12-01 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the science and technology necessary to understand, predict, and simulate the phenomena associated with intense dynamic loading of matter. The book begins with background information on shock wave phenomena in materials and how they are measured. This includes materials with strength, materials undergoing dynamic phase transformations, and material fracturing. The authors then cover the phenomena associated with detonations, where the chemical energy release of an explosive is an integral part of the hydrodynamics and describe the formation and application of the semi-empirical equation of state. They develop the numerical techniques for doing realistic computer simulations of complicated dynamical processes associated with impacts. The book closes with reviews simulations, compared with experiments, for a variety of dynamic loading events, including laser and electron beam interactions with metals, high explosive loading of iron, and impacts of cometary dust on the Vega space probe as it crossed the tail of Hailey's comet.

Download or read book Multidisciplinary Loess Geohazard Investigations written by Fanyu Zhang and published by Frontiers Media SA. This book was released on 2022-08-11 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fast Transverse Beam Instability Caused by Electron Cloud Trapped in Combined Function Magnets written by Sergey A. Antipov and published by Springer. This book was released on 2018-11-01 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents profound insights into the origins and dynamics of beam instabilities using both experimental observations and numerical simulations. When the Recycler Ring, a high-intensity proton beam accelerator at Fermi National Accelerator Laboratory, was commissioned, it became evident that the Recycler beam experiences a very fast instability of unknown nature. This instability was so fast that the existing dampers were ineffective at suppressing it. The nature of this phenomenon, alongside several other poorly understood features of the beam, became one of the biggest puzzles in the accelerator community. The author investigated a hypothesis that the instability arises from an interaction with a dense cloud of electrons accompanying the proton beam. He studied the phenomena experimentally by comparing the dynamics of stable and unstable beams, by numerically simulating the build-up of the electron cloud and its interaction with the beam, and by constructing an analytical model of an electron cloud-driven instability with the electrons trapped in combined-function dipole magnets. He has devised a method to stabilize the beam by a clearing bunch, which conclusively revealed that the instability is caused by the electron cloud, trapped in a strong magnetic field. Finally, he conducted measurements of the microwave propagation through a single dipole magnet. These measurements have confirmed the presence of the electron cloud in combined-function magnets.

Download or read book Recrystallization and Related Annealing Phenomena written by Anthony Rollett and published by Newnes. This book was released on 2017-07-24 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization and Related Annealing Phenomena, Third Edition, fulfills the information needs of materials scientists in both industry and academia. The subjects treated in the book are all active research areas, forming a major part of at least four regular international conference series. This new third edition ensures the reader has access to the latest findings, and is essential reading to those working in the forefront of research in universities and laboratories. For those in industry, the book highlights applications of the research and technology, exploring, in particular, the significant progress made recently in key areas such as deformed state, including deformation to very large strains, the characterization of microstructures by electron backscatter diffraction, the modeling and simulation of annealing, and continuous recrystallization. - Includes over 50% of new, revised, and updated material, highlighting the significant recent literature results in grain growth in non-crystallizing systems, 3D characterization techniques, quantitative modeling techniques, and all-new appendices on texture and measurements - Contains synthesized, detailed coverage from leading authors that bridge the gap between theory and practice - Includes a critical level of synthesis and pedagogy with an authored rather than edited volume

Download or read book U S Government Research Reports written by and published by . This book was released on 1963 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1969 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Unified Constitutive Laws of Plastic Deformation written by A. S. Krausz and published by Elsevier. This book was released on 1996-05-31 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-technology industries using plastic deformation demand soundly-based economical decisions in manufacturing design and product testing, and the unified constitutive laws of plastic deformation give researchers aguideline to use in making these decisions. This book provides extensive guidance in low cost manufacturing without the loss of product quality. Each highly detailed chapter of Unified Constitutive Laws of Plastic Deformation focuses on a distinct set of defining equations. Topics covered include anisotropic and viscoplastic flow, and the overall kinetics and thermodynamics of deformation. This important book deals with a prime topic in materials science and engineering, and will be of great use toboth researchers and graduate students. - Describes the theory and applications of the constitutive law of plastic deformation for materials testing - Examines the constitutive law of plastic deformation as it applies to process and product design - Includes a program on disk for the determination and development of the constitutive law of plastic deformation - Considers economical design and testing methods

Download or read book Elastic Strain Fields and Dislocation Mobility written by V.L. Indenbom and published by Elsevier. This book was released on 2012-12-02 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume aims to provide a thorough treatment of the phenomena of elastic anisostropy and a discussion on dislocation mobilities. The book presents a wide treatment of these topics, and includes descriptions of detailed theoretical models to describe dislocations and cracks, and moving dislocations. An overview is given of the physical behaviour resulting from dislocation mobility in materials, such as glide and climb, interactions with point defects and the behaviour of dislocations under radiation such as creep and swelling.

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flight Stability and Automatic Control written by Robert C. Nelson and published by . This book was released on 1998 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of this this flight stability and controls guide features an unintimidating math level, full coverage of terminology, and expanded discussions of classical to modern control theory and autopilot designs. Extensive examples, problems, and historical notes, make this concise book a vital addition to the engineer's library.

Download or read book Fundamental Aspects of Dislocation Interactions written by G. Kostorz and published by Elsevier. This book was released on 2013-09-03 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Aspects of Dislocation Interactions: Low-Energy Dislocation Structures III covers the papers presented at a European Research Conference on Plasticity of Materials-Fundamental Aspects of Dislocation Interactions: Low-Energy Dislocation Structures III, held on August 30-September 4, 1992 in Ascona, Switzerland. The book focuses on the processes, technologies, reactions, transformations, and approaches involved in dislocation interactions. The selection first offers information on work softening and Hall-Petch hardening in extruded mechanically alloyed alloys and dynamic origin of dislocation structures in deformed solids. Discussions focus on stress-strain behavior in relation to composition, structure, and annealing; comparison of stress-strain curves with work softening theory; sweeping and trapping mechanism; and model of dipolar wall structure formation. The text then ponders on plastic instabilities and their relation to fracture and dislocation and kink dynamics in f.c.c. metals studied by mechanical spectroscopy. The book takes a look at misfit dislocation generation mechanisms in heterostructures and evolution of dislocation structure on the interfaces associated with diffusionless phase transitions. Discussions focus on dislocation representation of a wall of elastic domains; equation of equilibrium of an elastic domain; transformation of dislocations; and theoretical and experimental background. The selection is a valuable reference for readers interested in dislocation interactions.

Download or read book OAR Quarterly Index of Current Research Results written by United States. Air Force. Office of Aerospace Research and published by . This book was released on 1959 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Deformation Processes in TRIP TWIP Steels written by Anja Weidner and published by Springer Nature. This book was released on 2020-04-09 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates the potential of novel in-situ experiments, performed on microscopic and macroscopic length scales, for investigating localized deformation processes in metallic materials, particularly their kinetics and the associated evolution of local strain fields. It features a broad methodological portfolio, spanning optical and electron microscopy, digital image correlation, infrared theromgraphy and acoustic emission testing, and particularly focuses on identifying the localized microscopic deformation processes in high-strength/high-ductility CrMnNi TRIP/TWIP (TRansformation Induced Plasticity/TWinning Induced Plasticity) steels. Presenting state-of-the art methodology applied to topical and pertinent problems in materials engineering, this book is a valuable resource for researchers and graduate students working in the field of plasticity and deformation of structural materials.