Download or read book Dynamic Simulations of Carbon Dioxide Pipeline Transportation for the Purpose of Carbon Capture and Storage written by Bilaal Yusef Hussain and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Carbon Dioxide Compression and Pipeline Transportation Processes written by Andrzej Witkowski and published by Springer. This book was released on 2015-05-25 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive analysis of CO2 compression, transportation processes and safety issues for post combustion CO2 capture applications for a 900 MW pulverized hard coal-fired power plant, this book assesses techniques for boosting the pressure of CO2 to pipeline pressure values with a minimal amount of energy. Four different types of compressors are examined in detail: a conventional multistage centrifugal compressor, integrally geared centrifugal compressor, supersonic shock wave compressor, and pump machines. The study demonstrates that the total compression power is closely related to the thermodynamic process and is not determined by compressor efficiency alone. Another problem addressed is that of CO2 pipeline transport from the compressor outlet site to a disposal site under heat transfer conditions. The book also features an analysis of simulations and models that are used to determine the maximum safe pipeline distance to subsequent booster stations as a function of inlet pressure, ambient temperature, thickness of the thermal insulation and ground-level heat flux conditions. This book focuses on compression as well as transportation processes with particular emphasis on the safety risks related to the transport of CO2. The most important problem in terms of environmental protection is ensuring precise and reliable hazard identification. As hazards can only be managed effectively if they are properly identified, problems involving the discharge and atmospheric dispersion of CO2 are also discussed.
Download or read book Pipeline Transportation of Carbon Dioxide Containing Impurities written by Mo Mohitpour and published by American Society of Mechanical Engineers. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipeline systems are expected to play an increasingly important role in transporting carbon dioxide (CO2) captured from flue stacks to distant fields for sequestration purposes or for Enhanced Oil Recovery (EOR). The phase diagram for a CO2 stream is very sensitive to the level of impurities, and this in turn affects pipeline design and the boundaries within which CO2 pipelines can be operated, without affecting the facilities design as well as delivery conditions. This book brings together the entire spectrum of design and operating needs for a pipeline and network of facilities that would transport CO2 containing impurities safely, without adverse impact on people and the environment. Other pipeline books published by ASME Press include: Pipeline Design and Construction: A Practical Approach, Third Edition, by Mohitpour, Golshan & Murray (2007) Pipeline Operation and Maintenance: A Practical Approach, Second Edition, by Mohitpour, van Hardeveld, Peterson & Szabo (2010) Energy Supply and Pipeline Transportation: Challenges and Opportunities, by Mohitpour (2008) Pipeline Pumping and Compression Systems: A Practical Approach, by Mohitpour, Botros, & Van Hardeveld (2008) Pipeline Integrity Assurance: A Practical Approach, by Mohitpour, Murray, McManus & Colquhoun (2010) In addition to several volumes in the ASME Pipeline Engineering Monograph Series. Book jacket.
Download or read book Developments and Innovation in Carbon Dioxide CO2 Capture and Storage Technology written by M. Mercedes Maroto-Valer and published by Elsevier. This book was released on 2010-06-21 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do without. CCS technology reduces the carbon footprint of power plants by capturing and storing the CO2 emissions from burning fossil-fuels and biomass. This volume provides a comprehensive reference on the state of the art research, development and demonstration of carbon capture technology in the power sector and in industry. It critically reviews the range of post- and pre-combustion capture and combustion-based capture processes and technology applicable to fossil-fuel power plants, as well as applications of CCS in other high carbon footprint industries. Foreword written by Lord Oxburgh, Climate Science Peer Reviews the economics, regulation and planning of carbon capture and storage for power plants and industry Explores developments in combustion processes and technologies for CO2 capture in power plants
Download or read book Carbon Capture and Storage written by Steve A. Rackley and published by Butterworth-Heinemann. This book was released on 2017-09-05 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Capture and Storage, Second Edition, provides a thorough, non-specialist introduction to technologies aimed at reducing greenhouse gas emissions from burning fossil fuels during power generation and other energy-intensive industrial processes, such as steelmaking. Extensively revised and updated, this second edition provides detailed coverage of key carbon dioxide capture methods along with an examination of the most promising techniques for carbon storage. The book opens with an introductory section that provides background regarding the need to reduce greenhouse gas emissions, an overview of carbon capture and storage (CCS) technologies, and a primer in the fundamentals of power generation. The next chapters focus on key carbon capture technologies, including absorption, adsorption, and membrane-based systems, addressing their applications in both the power and non-power sectors. New for the second edition, a dedicated section on geological storage of carbon dioxide follows, with chapters addressing the relevant features, events, and processes (FEP) associated with this scenario. Non-geological storage methods such as ocean storage and storage in terrestrial ecosystems are the subject of the final group of chapters. A chapter on carbon dioxide transportation is also included. This extensively revised and expanded second edition will be a valuable resource for power plant engineers, chemical engineers, geological engineers, environmental engineers, and industrial engineers seeking a concise, yet authoritative one-volume overview of this field. Researchers, consultants, and policy makers entering this discipline also will benefit from this reference. Provides all-inclusive and authoritative coverage of the major technologies under consideration for carbon capture and storage Presents information in an approachable format, for those with a scientific or engineering background, as well as non-specialists Includes a new Part III dedicated to geological storage of carbon dioxide, covering this topic in much more depth (9 chapters compared to 1 in the first edition) Features revisions and updates to all chapters Includes new sections or expanded content on: chemical looping/calcium looping; life-cycle GHG assessment of CCS technologies; non-power industries (e.g. including pulp/paper alongside ones already covered); carbon negative technologies (e.g. BECCS); gas-fired power plants; biomass and waste co-firing; and hydrate-based capture
Download or read book Pipeline Transportation of Carbon Dioxide Containing Impurities written by and published by . This book was released on 2012 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Climate Change 2014 written by Groupe d'experts intergouvernemental sur l'évolution du climat. Working group 3 and published by . This book was released on with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments and Innovation in Carbon Dioxide CO2 Capture and Storage Technology written by M. Mercedes Maroto-Valer and published by Elsevier. This book was released on 2010-07-13 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do without. CCS technology reduces the carbon footprint of power plants by capturing, and storing the CO2 emissions from burning fossil-fuels and biomass. This volume provides a comprehensive reference on the state of the art research, development and demonstration of carbon storage and utilisation, covering all the storage options and their environmental impacts. It critically reviews geological, terrestrial and ocean sequestration, including enhanced oil and gas recovery, as well as other advanced concepts such as industrial utilisation, mineral carbonation, biofixation and photocatalytic reduction. Foreword written by Lord Oxburgh, Climate Science Peer Comprehensively examines the different methods of storage of carbon dioxide (CO2) and the various concepts for utilisation Reviews geological sequestration of CO2, including coverage of reservoir sealing and monitoring and modelling techniques used to verify geological sequestration of CO2
Download or read book Carbon Dioxide Capture Transportation and Geological Storage Pipeline Transportation Systems written by and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Industrial Base for Carbon Dioxide Storage written by David S. Ortiz and published by Rand Corporation. This book was released on 2013-03-15 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: If policies aimed at large reductions of carbon dioxide (CO2) emissions are enacted, more carbon capture and storage will be needed. RAND researchers explored the ability of the industrial base supporting the transportation and sequestration of CO2 to expand, assessing the industrial base for transportation and injection of CO2 for both geologic storage and enhanced oil recovery.
Download or read book The Water Energy and Carbon Dioxide Sequestration Simulation Model WECSsim A User s Manual written by and published by . This book was released on 2014 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Water, Energy, and Carbon Sequestration Simulation Model (WECSsim) is a national dynamic simulation model that calculates and assesses capturing, transporting, and storing CO2 in deep saline formations from all coal and natural gas-fired power plants in the U.S. An overarching capability of WECSsim is to also account for simultaneous CO2 injection and water extraction within the same geological saline formation. Extracting, treating, and using these saline waters to cool the power plant is one way to develop more value from using saline formations as CO2 storage locations. WECSsim allows for both one-to-one comparisons of a single power plant to a single saline formation along with the ability to develop a national CO2 storage supply curve and related national assessments for these formations. This report summarizes the scope, structure, and methodology of WECSsim along with a few key results. Developing WECSsim from a small scoping study to the full national-scale modeling effort took approximately 5 years. This report represents the culmination of that effort. The key findings from the WECSsim model indicate the U.S. has several decades' worth of storage for CO2 in saline formations when managed appropriately. Competition for subsurface storage capacity, intrastate flows of CO2 and water, and a supportive regulatory environment all play a key role as to the performance and cost profile across the range from a single power plant to all coal and natural gas-based plants' ability to store CO2. The overall system's cost to capture, transport, and store CO2 for the national assessment range from $74 to $208 / tonne stored ($96 to 272 / tonne avoided) for the first 25 to 50% of the 1126 power plants to between $1,585 to well beyond $2,000 / tonne stored ($2,040 to well beyond $2,000 / tonne avoided) for the remaining 75 to 100% of the plants. The latter range, while extremely large, includes all natural gas power plants in the U.S., many of which have an extremely low capacity factor and therefore relatively high system's cost to capture and store CO2.
Download or read book Climate Intervention written by National Research Council and published by National Academies Press. This book was released on 2015-06-17 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: The signals are everywhere that our planet is experiencing significant climate change. It is clear that we need to reduce the emissions of carbon dioxide and other greenhouse gases from our atmosphere if we want to avoid greatly increased risk of damage from climate change. Aggressively pursuing a program of emissions abatement or mitigation will show results over a timescale of many decades. How do we actively remove carbon dioxide from the atmosphere to make a bigger difference more quickly? As one of a two-book report, this volume of Climate Intervention discusses CDR, the carbon dioxide removal of greenhouse gas emissions from the atmosphere and sequestration of it in perpetuity. Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration introduces possible CDR approaches and then discusses them in depth. Land management practices, such as low-till agriculture, reforestation and afforestation, ocean iron fertilization, and land-and-ocean-based accelerated weathering, could amplify the rates of processes that are already occurring as part of the natural carbon cycle. Other CDR approaches, such as bioenergy with carbon capture and sequestration, direct air capture and sequestration, and traditional carbon capture and sequestration, seek to capture CO2 from the atmosphere and dispose of it by pumping it underground at high pressure. This book looks at the pros and cons of these options and estimates possible rates of removal and total amounts that might be removed via these methods. With whatever portfolio of technologies the transition is achieved, eliminating the carbon dioxide emissions from the global energy and transportation systems will pose an enormous technical, economic, and social challenge that will likely take decades of concerted effort to achieve. Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration will help to better understand the potential cost and performance of CDR strategies to inform debate and decision making as we work to stabilize and reduce atmospheric concentrations of carbon dioxide.
Download or read book Modelling and Simulation of Carbon Dioxide Transportation in Pipelines written by Suoton P. Peletiri and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Carbon Capture written by Mohammad Reza Rahimpour and published by Woodhead Publishing. This book was released on 2020-08-04 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Carbon Capture reviews major implementations of CO2 capture, including absorption, adsorption, permeation and biological techniques. For each approach, key benefits and drawbacks of separation methods and technologies, perspectives on CO2 reuse and conversion, and pathways for future CO2 capture research are explored in depth. The work presents a comprehensive comparison of capture technologies. In addition, the alternatives for CO2 separation from various feeds are investigated based on process economics, flexibility, industrial aspects, purification level and environmental viewpoints. Explores key CO2 separation and compare technologies in terms of provable advantages and limitations Analyzes all critical CO2 capture methods in tandem with related technologies Introduces a panorama of various applications of CO2 capture
Download or read book CCS Guidelines written by Sarah M. Forbes and published by . This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Carbon Dioxide Capture and Storage (CCS) Guidelines effort was initiated to develop a set of preliminary guidelines and recommendations for the deployment of CCS technologies in the United States, to ensure that CCS projects are conducted safely and effectively. The guidelines are written for those who may be involved in decisions on a proposed project: the developers, regulators, financiers, insurers, project operators, and policy makers. These guidelines are intended to guide full-scale demonstration of and build public confidence in CCS technologies by informing how projects should be conducted.
Download or read book Centrifugal Compressors written by Ronald H. Aungier and published by American Society of Mechanical Engineers. This book was released on 2000 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: A mechanical engineer with a Pennsylvania turbomachinery company, A ungier describes his own system and strategy for designing and analyzing centrifugal compressor aerodynamics. To address the novice as well as the experienced in the field, he presents the basic thermodynamic and fluid dynamic principles, empirical models, and key numerical methods that form the basis of his methods. His strategy, or design practice, he found harder to describe because it involves a process of reasoning rather than following an established set of principles. He recognizes that his is only one of many possible methods, but makes no effort to compare or contrast his with any other.
Download or read book Negative Emissions Technologies and Reliable Sequestration written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-04-08 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve goals for climate and economic growth, "negative emissions technologies" (NETs) that remove and sequester carbon dioxide from the air will need to play a significant role in mitigating climate change. Unlike carbon capture and storage technologies that remove carbon dioxide emissions directly from large point sources such as coal power plants, NETs remove carbon dioxide directly from the atmosphere or enhance natural carbon sinks. Storing the carbon dioxide from NETs has the same impact on the atmosphere and climate as simultaneously preventing an equal amount of carbon dioxide from being emitted. Recent analyses found that deploying NETs may be less expensive and less disruptive than reducing some emissions, such as a substantial portion of agricultural and land-use emissions and some transportation emissions. In 2015, the National Academies published Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration, which described and initially assessed NETs and sequestration technologies. This report acknowledged the relative paucity of research on NETs and recommended development of a research agenda that covers all aspects of NETs from fundamental science to full-scale deployment. To address this need, Negative Emissions Technologies and Reliable Sequestration: A Research Agenda assesses the benefits, risks, and "sustainable scale potential" for NETs and sequestration. This report also defines the essential components of a research and development program, including its estimated costs and potential impact.
