Download or read book Computer Vision ECCV 2006 written by Aleš Leonardis and published by Springer. This book was released on 2006-07-25 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four-volume set comprising LNCS volumes 3951/3952/3953/3954 constitutes the refereed proceedings of the 9th European Conference on Computer Vision, ECCV 2006, held in Graz, Austria, in May 2006. The 192 revised papers presented were carefully reviewed and selected from a total of 811 papers submitted. The four books cover the entire range of current issues in computer vision. The papers are organized in topical sections on recognition, statistical models and visual learning, 3D reconstruction and multi-view geometry, energy minimization, tracking and motion, segmentation, shape from X, visual tracking, face detection and recognition, illumination and reflectance modeling, and low-level vision, segmentation and grouping.

Download or read book Digital Design using Verilog HDL written by Atul P. Godse and published by Technical Publications. This book was released on 2020-12-01 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book begins with an introduction to Verilog HDL. It describes basic concepts in Verilog HDL, language constructs and conventions and modeling styles - gate-level modeling, data-flow level modeling, behavioral modeling and switch level modeling. It also describes sequential models, basic memory components, functional register, static machine coding and sequential synthesis. The last section of the book focuses on component testing and verification. It includes combinational circuits testing, sequential circuit testing, test bench techniques, design verification and assertion verification.

Download or read book Physics of Intensity Dependent Beam Instabilities written by King-Yuen Ng and published by World Scientific. This book was released on 2006 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive treatment of intensity dependent particle beam instabilities in accelerating rings. Written for researchers, the material is also suitable for use as a textbook in an advanced graduate course for students studying accelerator physics.The presentation starts with a brief review of the basic concept of wake potentials and coupling impedances in the vacuum chamber followed by a discussion on static and dynamic solutions of their effects on the particle beams. Special emphasis is placed separately on proton and electron machines. Other special topics of interest covered include Landau damping, Balakin-Novokhatsky-Smirnov damping, Sacherer's integral equations, Landau cavity, saw-tooth instability, Robinson stability criteria, beam loading, transition crossing, two-stream instabilities, and collective instability issues of isochronous rings. After the formulation of an instability, readers are provided a thorough description of one or more experimental observations together with a discussion of the cures for the instability.Although the book is theory oriented, the use of mathematics has been minimized. The presentation is intended to be rigorous and self-contained with nearly all the formulas and equations derived.

Download or read book Electronic Transmission Controls written by Ronald K Jurgen and published by SAE International. This book was released on 2000-06-10 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of the automotive transmission has changed rapidly in the last decade, partly due to the advantages of highly sophisticated electronic controls. This evolution has resulted in modern automatic transmissions that offer more control, stability, and convenience to the driver. Electronic Transmission Controls contains 68 technical papers from SAE and other international organizations written since 1995 on this rapidly growing area of automotive electronics. This book breaks down the topic into two sections. The section on Stepped Transmissions covers recent developments in regular and 4-wheel drive transmissions from major auto manufacturers including DaimlerChrysler, General Motors, Toyota, Honda, and Ford. Technology covered in this section includes: smooth shift control; automatic transmission efficiency; mechatronic systems; fuel saving technologies; shift control using information from vehicle navigation systems; and fuzzy logic control. The section on Continuously Variable Transmissions presents papers that demonstrate that CVTs offer better efficiency than conventional transmissions. Technologies covered in this section include: powertrain control; fuel consumption improvement; development of a 2-way clutch system; internal combustion engines with CVTs in passenger cars; control and shift strategies; and CVT application to hybrid powertrains. The book concludes with a chapter on the future of electronic transmissions in automobiles.

Download or read book Nuclear Magnetic Resonance written by G. A. Webb and published by Royal Society of Chemistry. This book was released on 1989 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a spectroscopic method, Nuclear Magnetic Resonance (NMR) has seen spectacular growth over the past two decades, both as a technique and in its applications. Today the applications of NMR span a wide range of scientific disciplines, from physics to biology to medicine. Each volume of Nuclear Magnetic Resonance comprises a combination of annual and biennial reports which together provide comprehensive of the literature on this topic. This Specialist Periodical Report reflects the growing volume of published work involving NMR techniques and applications, in particular NMR of natural macromolecules which is covered in two reports: "NMR of Proteins and Acids" and "NMR of Carbohydrates, Lipids and Membranes". For those wanting to become rapidly acquainted with specific areas of NMR, this title provides unrivalled scope of coverage. Seasoned practitioners of NMR will find this an in valuable source of current methods and applications. Specialist Periodical Reports provide systematic and detailed review coverage in major areas of chemical research. Compiled by teams of leading authorities in the relevant subject areas, the series creates a unique service for the active research chemist, with regular, in-depth accounts of progress in particular fields of chemistry. Subject coverage within different volumes of a given title is similar and publication is on an annual or biennial basis.

Download or read book Identification of Dynamic Systems written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2010-11-22 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precise dynamic models of processes are required for many applications, ranging from control engineering to the natural sciences and economics. Frequently, such precise models cannot be derived using theoretical considerations alone. Therefore, they must be determined experimentally. This book treats the determination of dynamic models based on measurements taken at the process, which is known as system identification or process identification. Both offline and online methods are presented, i.e. methods that post-process the measured data as well as methods that provide models during the measurement. The book is theory-oriented and application-oriented and most methods covered have been used successfully in practical applications for many different processes. Illustrative examples in this book with real measured data range from hydraulic and electric actuators up to combustion engines. Real experimental data is also provided on the Springer webpage, allowing readers to gather their first experience with the methods presented in this book. Among others, the book covers the following subjects: determination of the non-parametric frequency response, (fast) Fourier transform, correlation analysis, parameter estimation with a focus on the method of Least Squares and modifications, identification of time-variant processes, identification in closed-loop, identification of continuous time processes, and subspace methods. Some methods for nonlinear system identification are also considered, such as the Extended Kalman filter and neural networks. The different methods are compared by using a real three-mass oscillator process, a model of a drive train. For many identification methods, hints for the practical implementation and application are provided. The book is intended to meet the needs of students and practicing engineers working in research and development, design and manufacturing.

Download or read book Design Through Verilog HDL written by T. R. Padmanabhan and published by John Wiley & Sons. This book was released on 2003-11-05 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive resource on Verilog HDL for beginners and experts Large and complicated digital circuits can be incorporated into hardware by using Verilog, a hardware description language (HDL). A designer aspiring to master this versatile language must first become familiar with its constructs, practice their use in real applications, and apply them in combinations in order to be successful. Design Through Verilog HDL affords novices the opportunity to perform all of these tasks, while also offering seasoned professionals a comprehensive resource on this dynamic tool. Describing a design using Verilog is only half the story: writing test-benches, testing a design for all its desired functions, and how identifying and removing the faults remain significant challenges. Design Through Verilog HDL addresses each of these issues concisely and effectively. The authors discuss constructs through illustrative examples that are tested with popular simulation packages, ensuring the subject matter remains practically relevant. Other important topics covered include: Primitives Gate and Net delays Buffers CMOS switches State machine design Further, the authors focus on illuminating the differences between gate level, data flow, and behavioral styles of Verilog, a critical distinction for designers. The book's final chapters deal with advanced topics such as timescales, parameters and related constructs, queues, and switch level design. Each chapter concludes with exercises that both ensure readers have mastered the present material and stimulate readers to explore avenues of their own choosing. Written and assembled in a paced, logical manner, Design Through Verilog HDL provides professionals, graduate students, and advanced undergraduates with a one-of-a-kind resource.

Download or read book Structural Nonlinear Dynamics and Diagnosis written by Mohamed Belhaq and published by Springer. This book was released on 2015-08-13 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, which presents the peer-reviewed post-proceedings of CSNDD 2012 and CSNDD 2014, addresses the important role that relevant concepts and tools from nonlinear and complex dynamics could play in present and future engineering applications. It includes 22 chapters contributed by outstanding researchers and covering various aspects of applications, including: structural health monitoring, diagnosis and damage detection, experimental methodologies, active vibration control and smart structures, passive control of structures using nonlinear energy sinks, vibro-impact dynamic MEMS/NEMS/AFM, energy-harvesting materials and structures, and time-delayed feedback control, as well as aspects of deterministic versus stochastic dynamics and control of nonlinear phenomena in physics. Researchers and engineers interested in the challenges posed and opportunities offered by nonlinearities in the development of passive and active control strategies, energy harvesting, novel design criteria, modeling and characterization will find the book to be an outstanding introduction.

Download or read book Introduction to NMOS and CMOS VLSI Systems Design written by Amar Mukherjee and published by Prentice Hall. This book was released on 1986 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Properties and Structural Materials written by Y.M. Song and published by Trans Tech Publications Ltd. This book was released on 2012-10-08 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present work comprises selected peer-reviewed papers from the International Mechanical Properties and Structural Materials Conference (IMPSMC 2012), held on the 17 to 19th August 2012, in Shenyang, Liaoning, China. The 128 selected papers are grouped into two chapters: 1: Mechanical Engineering; 2: Materials Engineering. They offer an up-to-date view of the field.

Download or read book Fundamentals of Structured Hardware Design written by Reiner Hartenstein and published by North-Holland. This book was released on 1977 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Advances and Future Directions in Causality Prediction and Specification Analysis written by Xiaohong Chen and published by Springer Science & Business Media. This book was released on 2012-08-01 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of articles that present the most recent cutting edge results on specification and estimation of economic models written by a number of the world’s foremost leaders in the fields of theoretical and methodological econometrics. Recent advances in asymptotic approximation theory, including the use of higher order asymptotics for things like estimator bias correction, and the use of various expansion and other theoretical tools for the development of bootstrap techniques designed for implementation when carrying out inference are at the forefront of theoretical development in the field of econometrics. One important feature of these advances in the theory of econometrics is that they are being seamlessly and almost immediately incorporated into the “empirical toolbox” that applied practitioners use when actually constructing models using data, for the purposes of both prediction and policy analysis and the more theoretically targeted chapters in the book will discuss these developments. Turning now to empirical methodology, chapters on prediction methodology will focus on macroeconomic and financial applications, such as the construction of diffusion index models for forecasting with very large numbers of variables, and the construction of data samples that result in optimal predictive accuracy tests when comparing alternative prediction models. Chapters carefully outline how applied practitioners can correctly implement the latest theoretical refinements in model specification in order to “build” the best models using large-scale and traditional datasets, making the book of interest to a broad readership of economists from theoretical econometricians to applied economic practitioners.

Download or read book Intelligent Robotics and Applications written by Jeschke Sabina and published by Springer Science & Business Media. This book was released on 2011-11-29 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volume set LNAI 7101 and 7102 constitute the refereed proceedings of the 4th International Conference on Intelligent Robotics and Applications, ICIRA 2011, held in Aachen, Germany, in November 2011. The 122 revised full papers presented were thoroughly reviewed and selected from numerous submissions. They are organized in topical sections on progress in indoor UAV, robotics intelligence, industrial robots, rehabilitation robotics, mechanisms and their applications, multi robot systems, robot mechanism and design, parallel kinematics, parallel kinematics machines and parallel robotics, handling and manipulation, tangibility in human-machine interaction, navigation and localization of mobile robot, a body for the brain: embodied intelligence in bio-inspired robotics, intelligent visual systems, self-optimising production systems, computational intelligence, robot control systems, human-robot interaction, manipulators and applications, stability, dynamics and interpolation, evolutionary robotics, bio-inspired robotics, and image-processing applications.

Download or read book Nonlinear Phenomena in Flows of Viscoelastic Polymer Fluids written by A.I. Leonov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents theoretical and experimental studies of flows of elastic liquids. Falling into this category are particularly the melts and concentrated solutions of such flexible-chain polymers as polyethylene, polyisobutylene and polypropylene, all of which are widely used in polymer processing. These polydisperse polymers vary greatly, from batch to batch, in their mechanical properties and 20% variation in a property is believed to be good enough. l 7 All recent books - devoted to the rheology of polymers do not answer the question of which constitutive equations should be used for solving the fluid mechanic problems of polymer processing in the usual case of an appreciable nonlinear region of deformation where nonlinear effects of shear and extensional elasticity are very important. Viscoelastic constitut ive equations cited commonly (see, e.g. Refs 5 and 6) do not describe simultaneously even the simplest cases of deformations, viz. simple shear and uniaxial extension. Moreover, some of them are internally inconsist ent and sometimes display highly unstable behaviour in simple flows without any fundamental reasons. Even more respected molecular ap free from these defects.

Download or read book Encyclopedia of Computer Science and Technology written by Allen Kent and published by CRC Press. This book was released on 1993-04-05 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This comprehensive reference work provides immediate, fingertip access to state-of-the-art technology in nearly 700 self-contained articles written by over 900 international authorities. Each article in the Encyclopedia features current developments and trends in computers, software, vendors, and applications...extensive bibliographies of leading figures in the field, such as Samuel Alexander, John von Neumann, and Norbert Wiener...and in-depth analysis of future directions."

Download or read book Automated Biometrics written by David D. Zhang and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biometrics-based authentication and identification are emerging as the most reliable method to authenticate and identify individuals. Biometrics requires that the person to be identified be physically present at the point-of-identification and relies on `something which you are or you do' to provide better security, increased efficiency, and improved accuracy. Automated biometrics deals with physiological or behavioral characteristics such as fingerprints, signature, palmprint, iris, hand, voice and face that can be used to authenticate a person's identity or establish an identity from a database. With rapid progress in electronic and Internet commerce, there is also a growing need to authenticate the identity of a person for secure transaction processing. Designing an automated biometrics system to handle large population identification, accuracy and reliability of authentication are challenging tasks. Currently, there are over ten different biometrics systems that are either widely used or under development. Some automated biometrics, such as fingerprint identification and speaker verification, have received considerable attention over the past 25 years, and some issues like face recognition and iris-based authentication have been studied extensively resulting in successful development of biometrics systems in commercial applications. However, very few books are exclusively devoted to such issues of automated biometrics. Automated Biometrics: Technologies and Systems systematically introduces the technologies and systems, and explores how to design the corresponding systems with in-depth discussion. The issues addressed in this book are highly relevant to many fundamental concerns of both researchers and practitioners of automated biometrics in computer and system security.

Download or read book 17 0 NMR Spectroscopy in Organic Chemistry written by David W. Boykin and published by CRC Press. This book was released on 2020-08-26 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive review of the application of 17O NMR spectroscopy to organic chemistry. Topics include the theoretical aspects of chemical shift, quadrupolar and J coupling; 17O enrichment; the effect of steric interactions on 17O chemical shifts of functional groups in flexible and rigid systems; the application of 17O NMR spectroscopy to hydrogen bonding investigations; mechanistic problems in organic and bioorganic chemistry; and 17O NMR spectroscopy of oxygen monocoordinated to carbon in alcohols, ethers, and derivatives. Recent results that show correlations between molecular geometry, determined by X-ray studies and estimated by molecular mechanics calculations, and 17O chemical shifts are also covered. 17O Spectroscopy in Organic Chemistry provides important reference information for organic chemists and other scientists interested in 17O NMR spectroscopy as a tool for obtaining new structural and chemical data about organic molecules.