Download or read book Dynamic Scheduling with Microsoft Project 2010 written by Rodolfo Ambriz and published by J. Ross Publishing. This book was released on 2011-05-15 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through the use of best practices, helpful screen shots, hands-on exercises, and review questions, this book instructs you on how to build dynamic schedules with Microsoft Project 2010 that will allow you to explore 'what if?' scenarios and decrease the time you spend making static schedule changes.
Download or read book Project Management with Dynamic Scheduling written by Mario Vanhoucke and published by Springer Science & Business Media. This book was released on 2013-11-29 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is known as dynamic scheduling, and is used to refer to three dimensions of project management and scheduling: the construction of a baseline schedule and the analysis of a project schedule’s risk as preparation of the project control phase during project progress. This dynamic scheduling point of view implicitly assumes that the usability of a project’s baseline schedule is rather limited and only acts as a point of reference in the project life cycle. Consequently, a project schedule should especially be considered as nothing more than a predictive model that can be used for resource efficiency calculations, time and cost risk analyses, project tracking and performance measurement, and so on. In this book, the three dimensions of dynamic scheduling are highlighted in detail and are based on and inspired by a combination of academic research studies at Ghent University (www.ugent.be), in-company trainings at Vlerick Business School (www.vlerick.com) and consultancy projects at OR-AS (www.or-as.be). First, the construction of a project baseline schedule is a central theme throughout the various chapters of the book, and is discussed from a complexity point of view with and without the presence of project resources. Second, the creation of an awareness of the weak parts in a baseline schedule is discussed at the end of the two baseline scheduling parts as schedule risk analysis techniques that can be applied on top of the baseline schedule. Third, the baseline schedule and its risk analyses can be used as guidelines during the project control step where actual deviations can be corrected within the margins of the project’s time and cost reserves. The second edition of this book has seen corrections, additions and amendments in detail throughout the book. Moreover Chapter 15 on "Dynamic Scheduling with ProTrack" has been completely rewritten and extended with a section on "ProTrack as a research tool".
Download or read book Dynamic Scheduling with Microsoft Office Project 2007 written by Rodolfo Ambriz and published by J. Ross Publishing. This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now fully revised and updated, this bestselling title provides practitioners a complete picture of why, when, and how to use the various new features of the 2007 version software with Service Pack 1 updates to their maximum potential and achieve the best results in real-world practice.
Download or read book Dynamic Scheduling with Microsoft Office Project 2003 written by Eric Uyttewaal and published by J. Ross Publishing. This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microsoft Office Project 2003 is a powerful software tool, and like all tools, it requires knowledge and skill to be used to its maximum potential. This fully revised new edition of Eric Uyttewaal's best-selling book on Microsoft Project provides users with everything they will need to more easily and effectively manage projects to a successful conclusion. Dynamic Scheduling with Microsoftr Office Project 2003: The Book By and For Professionals is not only written by a certified PMP and project management practitioner with over 17 years of experience using and teaching MS Project, but is also based on the cumulative experience of the author's clients, other instructors, and includes insights from numerous other professionals who have used MS Office Project successfully.
Download or read book Project Management with Dynamic Scheduling written by Mario Vanhoucke and published by Springer Science & Business Media. This book was released on 2012-02-09 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is known as dynamic scheduling, and is used to refer to three dimensions of project management and scheduling: the construction of a baseline schedule and the analysis of a project schedule’s risk as preparation of the project control phase during project progress. This dynamic scheduling point of view implicitly assumes that the usability of a project’s baseline schedule is rather limited and only acts as a point of reference in the project life cycle. Consequently, a project schedule should especially be considered as nothing more than a predictive model that can be used for resource efficiency calculations, time and cost risk analyses, project tracking and performance measurement, and so on. In this book, the three dimensions of dynamic scheduling are highlighted in detail and are based on and inspired by a combination of academic research studies at Ghent University (www.ugent.be), in-company trainings at Vlerick Leuven Gent Management School (www.vlerick.com) and consultancy projects at OR-AS (www.or-as.be). First, the construction of a project baseline schedule is a central theme throughout the various chapters of the book, and is discussed from a complexity point of view with and without the presence of project resources. Second, the creation of an awareness of the weak parts in a baseline schedule is discussed at the end of the two baseline scheduling parts as schedule risk analysis techniques that can be applied on top of the baseline schedule. Third, the baseline schedule and its risk analyses can be used as guidelines during the project control step where actual deviations can be corrected within the margins of the project’s time and cost reserves.
Download or read book Dynamic Scheduling with Microsoft Project 2013 written by Rodolfo Ambriz and published by . This book was released on 2014 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microsoft Project 2013 is a powerful software tool, and like all tools it requires knowledge and skill to be used to its maximum potential. This fully revised new edition provides users with everything they will need to more easily and effectively manage projects to a successful conclusion. Designed for the busy, practicing project manager, Dynamic Scheduling With Microsoft Project 2013 will help you get up to speed quickly with the new and enhanced features of Project 2013 (including Project Pro for Office 365) and enable you to create effective schedules using best practices, tips & tricks, and step-by-step instruction. Through the use of helpful screenshots, hands-on exercises, illustrations, and review questions, this guide instructs you on how to build dynamic schedules that will allow you to explore what-if scenarios and dramatically decrease the time you spend making static schedule changes. "A must read, reread, and use daily for all project managers" is what PMI's Project Management Journal had to say about the previous edition. This updated version is even better! Key Features Fully aligned with the PMBOK Guide - Fifth Edition, The Practice Standard for Work Breakdown Structures - Second Edition, The Practice Standard for Scheduling - Second Edition, and The Practice Standard for Earned Value Management - Second Edition by the Project Management Institute Validated training material for the new Microsoft Certification Exam 74-343: Managing Projects with Microsoft Project 2013 Captures the best practices and insights that have been gained from thousands of real-life schedules and years of training project managers across all industries WAV offers downloadable exercise files, a glossary of terms, filters to check your own project, an advance topics appendix, and a solutions manual for college professors available from the Web Added Value Download Resource Center at www.jrosspub.com.
Download or read book Dynamic Scheduling With Microsoft Project 2013 written by Rodolfo Ambriz and published by J. Ross Publishing. This book was released on 2014-10-21 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: “More than a how-to book, Dynamic Scheduling® With Microsoft® Project 2013 takes you on a journey from concepts through frameworks and processes and then unleashes the power of Project 2013. Easy to use, the book lays out a solid foundation and the authors masterfully walk you through basic functionality and all the new bells and whistles. Enjoy the ride!” —Scott G. Fass, PMP, Strategy, Operations and PPM Executive Microsoft® Project 2013 is a powerful software tool, and like all tools it requires knowledge and skill to be used to its maximum potential. This fully revised new edition provides users with everything they will need to more easily and effectively manage projects to a successful conclusion. Designed for the busy, practicing project manager, Dynamic Scheduling® With Microsoft®Project 2013 will help you get up to speed quickly with the new and enhanced features of Project 2013 (including Project Pro for Office 365) and enable you to create effective schedules using best practices, tips & tricks, and step-by-step instruction. Through the use of helpful screenshots, hands-on exercises, illustrations, and review questions, this guide instructs you on how to build dynamic schedules that will allow you to explore what-if scenarios and dramatically decrease the time you spend making static schedule changes. “A must read, reread, and use daily for all project managers” is what PMI’s Project Management Journal had to say about previous editions. This updated version is even better!
Download or read book Multi Level Lot Sizing and Scheduling written by Alf Kimms and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outcome of my research in the field of multi levellot sizing and scheduling which started in May 1993 at the Christian-Albrechts-University of Kiel (Germany). During this time I discovered more and more interesting aspects ab out this subject and I had to learn that not every promising idea can be thoroughly evaluated by one person alone. Nevertheless, I am now in the position to present some results which are supposed to be useful for future endeavors. Since April 1995 the work was done with partial support from the research project no. Dr 170/4-1 from the "Deutsche For schungsgemeinschaft" (D FG). The remaining space in this preface shaH be dedicated to those who gave me valuable support: First, let me express my deep gratitude towards my thesis ad visor Prof. Dr. Andreas Drexl. He certainly is a very outstanding advisor. Without his steady suggestions, this work would not have come that far. Despite his scarce time capacities, he never rejected proof-reading draft versions of working papers, and he was always willing to discuss new ideas - the good as weH as the bad ones. He and Prof. Dr. Gerd Hansen refereed this thesis. I am in debted to both for their assessment. I am also owing something to Dr. Knut Haase. Since we al most never had the same opinion when discussing certain lot sizing aspects, his comments and criticism gave stimulating input.
Download or read book Computer Architecture written by John L. Hennessy and published by Elsevier. This book was released on 2002-05-29 with total page 1133 pages. Available in PDF, EPUB and Kindle. Book excerpt: This best-selling title, considered for over a decade to be essential reading for every serious student and practitioner of computer design, has been updated throughout to address the most important trends facing computer designers today. In this edition, the authors bring their trademark method of quantitative analysis not only to high performance desktop machine design, but also to the design of embedded and server systems. They have illustrated their principles with designs from all three of these domains, including examples from consumer electronics, multimedia and web technologies, and high performance computing. The book retains its highly rated features: Fallacies and Pitfalls, which share the hard-won lessons of real designers; Historical Perspectives, which provide a deeper look at computer design history; Putting it all Together, which present a design example that illustrates the principles of the chapter; Worked Examples, which challenge the reader to apply the concepts, theories and methods in smaller scale problems; and Cross-Cutting Issues, which show how the ideas covered in one chapter interact with those presented in others. In addition, a new feature, Another View, presents brief design examples in one of the three domains other than the one chosen for Putting It All Together. The authors present a new organization of the material as well, reducing the overlap with their other text, Computer Organization and Design: A Hardware/Software Approach 2/e, and offering more in-depth treatment of advanced topics in multithreading, instruction level parallelism, VLIW architectures, memory hierarchies, storage devices and network technologies. Also new to this edition, is the adoption of the MIPS 64 as the instruction set architecture. In addition to several online appendixes, two new appendixes will be printed in the book: one contains a complete review of the basic concepts of pipelining, the other provides solutions a selection of the exercises. Both will be invaluable to the student or professional learning on her own or in the classroom. Hennessy and Patterson continue to focus on fundamental techniques for designing real machines and for maximizing their cost/performance. * Presents state-of-the-art design examples including: * IA-64 architecture and its first implementation, the Itanium * Pipeline designs for Pentium III and Pentium IV * The cluster that runs the Google search engine * EMC storage systems and their performance * Sony Playstation 2 * Infiniband, a new storage area and system area network * SunFire 6800 multiprocessor server and its processor the UltraSPARC III * Trimedia TM32 media processor and the Transmeta Crusoe processor * Examines quantitative performance analysis in the commercial server market and the embedded market, as well as the traditional desktop market. Updates all the examples and figures with the most recent benchmarks, such as SPEC 2000. * Expands coverage of instruction sets to include descriptions of digital signal processors, media processors, and multimedia extensions to desktop processors. * Analyzes capacity, cost, and performance of disks over two decades. Surveys the role of clusters in scientific computing and commercial computing. * Presents a survey, taxonomy, and the benchmarks of errors and failures in computer systems. * Presents detailed descriptions of the design of storage systems and of clusters. * Surveys memory hierarchies in modern microprocessors and the key parameters of modern disks. * Presents a glossary of networking terms.
Download or read book VoIP Technologies written by Shigeru Kashihara and published by BoD – Books on Demand. This book was released on 2011-02-14 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a collection of 15 excellent studies of Voice over IP (VoIP) technologies. While VoIP is undoubtedly a powerful and innovative communication tool for everyone, voice communication over the Internet is inherently less reliable than the public switched telephone network, because the Internet functions as a best-effort network without Quality of Service guarantee and voice data cannot be retransmitted. This book introduces research strategies that address various issues with the aim of enhancing VoIP quality. We hope that you will enjoy reading these diverse studies, and that the book will provide you with a lot of useful information about current VoIP technology research.
Download or read book Resource Allocation in Next Generation Broadband Wireless Access Networks written by Singhal, Chetna and published by IGI Global. This book was released on 2017-02-14 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the growing popularity of wireless networks in recent years, the need to increase network capacity and efficiency has become more prominent in society. This has led to the development and implementation of heterogeneous networks. Resource Allocation in Next-Generation Broadband Wireless Access Networks is a comprehensive reference source for the latest scholarly research on upcoming 5G technologies for next generation mobile networks, examining the various features, solutions, and challenges associated with such advances. Highlighting relevant coverage across topics such as energy efficiency, user support, and adaptive multimedia services, this book is ideally designed for academics, professionals, graduate students, and professionals interested in novel research for wireless innovations.
Download or read book Theory Methodology Tools and Applications for Modeling and Simulation of Complex Systems written by Lin Zhang and published by Springer. This book was released on 2016-09-21 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume set (CCIS 643, 644, 645, 646) constitutes the refereed proceedings of the 16th Asia Simulation Conference and the First Autumn Simulation Multi-Conference, AsiaSim / SCS AutumnSim 2016, held in Beijing, China, in October 2016. The 265 revised full papers presented were carefully reviewed and selected from 651 submissions. The papers in this third volume of the set are organized in topical sections on Cloud technologies in simulation applications; fractional calculus with applications and simulations; modeling and simulation for energy, environment and climate; SBA virtual prototyping engineering technology; simulation and Big Data.
Download or read book Languages and Compilers for Parallel Computing written by Samuel P. Midkiff and published by Springer. This book was released on 2003-06-29 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the 13th International Workshop on Languages and Compilers for Parallel Computing. It also contains extended abstracts of submissions that were accepted as posters. The workshop was held at the IBM T. J. Watson Research Center in Yorktown Heights, New York. As in previous years, the workshop focused on issues in optimizing compilers, languages, and software environments for high performance computing. This continues a trend in which languages, compilers, and software environments for high performance computing, and not strictly parallel computing, has been the organizing topic. As in past years, participants came from Asia, North America, and Europe. This workshop re?ected the work of many people. In particular, the members of the steering committee, David Padua, Alex Nicolau, Utpal Banerjee, and David Gelernter, have been instrumental in maintaining the focus and quality of the workshop since it was ?rst held in 1988 in Urbana-Champaign. The assistance of the other members of the program committee – Larry Carter, Sid Chatterjee, Jeanne Ferrante, Jans Prins, Bill Pugh, and Chau-wen Tseng – was crucial. The infrastructure at the IBM T. J. Watson Research Center provided trouble-free logistical support. The IBM T. J. Watson Research Center also provided ?nancial support by underwriting much of the expense of the workshop. Appreciation must also be extended to Marc Snir and Pratap Pattnaik of the IBM T. J. Watson Research Center for their support.
Download or read book Internet and Distributed Computing Systems written by Mukaddim Pathan and published by Springer. This book was released on 2013-10-22 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th International Conference on Internet and Distributed Computing Systems, IDCS 2013, held in Hangzhou, China, in October 2013. The 20 revised full papers and 13 invited papers presented were carefully reviewed and selected from numerous submissions. The papers cover the following topics: ad-hoc and sensor networks, internet and Web technologies, network operations and management, information infrastructure; resilience, as well as fault tolerance and availability.
Download or read book Network Security Metrics written by Lingyu Wang and published by Springer. This book was released on 2017-11-15 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines different aspects of network security metrics and their application to enterprise networks. One of the most pertinent issues in securing mission-critical computing networks is the lack of effective security metrics which this book discusses in detail. Since “you cannot improve what you cannot measure”, a network security metric is essential to evaluating the relative effectiveness of potential network security solutions. The authors start by examining the limitations of existing solutions and standards on security metrics, such as CVSS and attack surface, which typically focus on known vulnerabilities in individual software products or systems. The first few chapters of this book describe different approaches to fusing individual metric values obtained from CVSS scores into an overall measure of network security using attack graphs. Since CVSS scores are only available for previously known vulnerabilities, such approaches do not consider the threat of unknown attacks exploiting the so-called zero day vulnerabilities. Therefore, several chapters of this book are dedicated to develop network security metrics especially designed for dealing with zero day attacks where the challenge is that little or no prior knowledge is available about the exploited vulnerabilities, and thus most existing methodologies for designing security metrics are no longer effective. Finally, the authors examine several issues on the application of network security metrics at the enterprise level. Specifically, a chapter presents a suite of security metrics organized along several dimensions for measuring and visualizing different aspects of the enterprise cyber security risk, and the last chapter presents a novel metric for measuring the operational effectiveness of the cyber security operations center (CSOC). Security researchers who work on network security or security analytics related areas seeking new research topics, as well as security practitioners including network administrators and security architects who are looking for state of the art approaches to hardening their networks, will find this book helpful as a reference. Advanced-level students studying computer science and engineering will find this book useful as a secondary text.
Download or read book 5G NR written by Erik Dahlman and published by Academic Press. This book was released on 2020-09-18 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: 5G NR: The Next Generation Wireless Access Technology, Second Edition, follows the authors' highly celebrated books on 3G and 4G and provides a new level of insight into 5G NR. After background discussion of 5G, including requirements, spectrum aspects, and the standardization timeline, all technology features of the first phase of NR are described in detail. The book covers the NR physical-layer structure and higher-layer protocols, RF and spectrum aspects, and co-existence and interworking with LTE. The book provides a good foundation in NR and different NR technology components, giving insight into why a certain solution has been selected.This second edition is updated to reflect the latest developments in Release 16 and includes brand new chapters on: NR in unlicensed spectrum; NR-U in Rel-16; IAB; V2X and sidelink in Rel-16; industrial IoT; IIoT and referring to the URLLC enhancements for PDCCH; RIM/CL; and positioning. Also included are the key radio-related requirements of NR; design principles; technical features of basic NR transmission structure—showing where it was inherited from LTE, where it deviates from it, and the reasons why— NR multi-antenna transmission functionality; detailed description of the signals and functionality of the initial NR access, including signals for synchronization and system information; random access and paging; LTE/NR co-existence in the same spectrum and the benefits of their interworking as one system; and different aspects of mobility in NR. RF requirements for NR are described for BS and UE, the legacy bands, and for the new mm-wave bands. - Gives a concise and accessible explanation of the underlying technology and standards for 5G NR radio-access technology - Provides detailed description of the NR physical-layer structure and higher-layer protocols, RF and spectrum aspects, and co-existence and interworking with LTE - Gives insight not only into the details of the NR specification, but also an understanding of why certain solutions look like they do - Includes the key radio-related requirements of NR, design principles, and technical features of basic NR transmission structure
Download or read book Technological Developments in Networking Education and Automation written by Khaled Elleithy and published by Springer Science & Business Media. This book was released on 2010-06-18 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technological Developments in Networking, Education and Automation includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the following areas: Computer Networks: Access Technologies, Medium Access Control, Network architectures and Equipment, Optical Networks and Switching, Telecommunication Technology, and Ultra Wideband Communications. Engineering Education and Online Learning: including development of courses and systems for engineering, technical and liberal studies programs; online laboratories; intelligent testing using fuzzy logic; taxonomy of e-courses; and evaluation of online courses. Pedagogy: including benchmarking; group-learning; active learning; teaching of multiple subjects together; ontology; and knowledge management. Instruction Technology: including internet textbooks; virtual reality labs, instructional design, virtual models, pedagogy-oriented markup languages; graphic design possibilities; open source classroom management software; automatic email response systems; tablet-pcs; personalization using web mining technology; intelligent digital chalkboards; virtual room concepts for cooperative scientific work; and network technologies, management, and architecture. Coding and Modulation: Modeling and Simulation, OFDM technology , Space-time Coding, Spread Spectrum and CDMA Systems. Wireless technologies: Bluetooth , Cellular Wireless Networks, Cordless Systems and Wireless Local Loop, HIPERLAN, IEEE 802.11, Mobile Network Layer, Mobile Transport Layer, and Spread Spectrum. Network Security and applications: Authentication Applications, Block Ciphers Design Principles, Block Ciphers Modes of Operation, Electronic Mail Security, Encryption & Message Confidentiality, Firewalls, IP Security, Key Cryptography & Message Authentication, and Web Security. Robotics, Control Systems and Automation: Distributed Control Systems, Automation, Expert Systems, Robotics, Factory Automation, Intelligent Control Systems, Man Machine Interaction, Manufacturing Information System, Motion Control, and Process Automation. Vision Systems: for human action sensing, face recognition, and image processing algorithms for smoothing of high speed motion. Electronics and Power Systems: Actuators, Electro-Mechanical Systems, High Frequency Converters, Industrial Electronics, Motors and Drives, Power Converters, Power Devices and Components, and Power Electronics.
