Download or read book DYNAMIC POSITIONING written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Positioning of Offshore Vessels written by Max J. Morgan and published by . This book was released on 1978 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Positioning for Engineers written by Surender Kumar and published by CRC Press. This book was released on 2020-10-28 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Positioning for Engineers enables the reader to acquire the basic knowledge of the concepts and understanding of the dynamic positioning (DP) system from the systems perspective. This book illustrates the system, subsystems and components of the DP system to better tackle maintenance, problems and breakdowns, leading to an increased mean time between failures and effective fault finding on dynamic positioning DP-related equipment. Overall, this text will help professionals reduce downtime and higher repair costs. Aimed at onboard electrical engineers, engine room watch officers, chief engineers, DP professionals onboard, in onshore officers and those taking DP training courses, this book: Explains automation and its application in the DP system Describes environmental sensors and position reference sensors as important inputs to the DP system Includes chapters on power management and thrusters Aids engineers in maintaining a the DP system in good operational condition
Download or read book Dynamic Positioning Systems written by Hubert Faÿ and published by Editions OPHRYS. This book was released on with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Positioning written by Dr Surender Kumar and published by Notion Press. This book was released on 2020-11-26 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is important for every DP professional to understand the system well that they are going operate or maintain. Keeping this in view, this book starts with an introduction to the functioning of DP system. Chapter two makes the reader aware of the six degrees of the movements. The understanding of the movements controlled by the DP system and the movements compensated for offsetting the readings of the position reference sensors is explained. Chapter three deals with the seven components of the DP system, how they connect with each other and how the controller controls the thruster output with the help of thruster allocation logic. Asking questions make the learning process more interactive. The book includes the questions and their answers which address various aspects of Bloom’s taxonomy of understanding, applying and evaluating the subject. Chapter four to chapter fifteen contain the questions and answers. These chapters include questions and answers from basic functioning of the DP system, the sensor, position reference sensor, test on PRS, automation and networking used in DP system, various tests and trials conducted and importantly the operations related questions.
Download or read book Dynamic Positioning for Engineers written by Surender Kumar and published by CRC Press. This book was released on 2020-10-28 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Positioning for Engineers enables the reader to acquire the basic knowledge of the concepts and understanding of the dynamic positioning (DP) system from the systems perspective. This book illustrates the system, subsystems and components of the DP system to better tackle maintenance, problems and breakdowns, leading to an increased mean time between failures and effective fault finding on dynamic positioning DP-related equipment. Overall, this text will help professionals reduce downtime and higher repair costs. Aimed at onboard electrical engineers, engine room watch officers, chief engineers, DP professionals onboard, in onshore officers and those taking DP training courses, this book: Explains automation and its application in the DP system Describes environmental sensors and position reference sensors as important inputs to the DP system Includes chapters on power management and thrusters Aids engineers in maintaining a the DP system in good operational condition
Download or read book Dynamic Positioning Systems written by Fidaa Karkori and published by Springer Nature. This book was released on with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book DP Operator s Handbook written by D. J. Bray and published by . This book was released on 2010 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Positioning of Vessels at Sea written by Johannes Pinkster and published by Springer. This book was released on 2014-05-04 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Positioning written by David Bray and published by . This book was released on 2003 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic HTML written by Danny Goodman and published by "O'Reilly Media, Inc.". This book was released on 2007 with total page 1322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an indispensable compendium for Web content developers. It contains everything you need to create functional cross-platform Web applications.
Download or read book Online Probabilistic Risk Assessment of Complex Marine Systems written by Tarannom Parhizkar and published by Springer Nature. This book was released on 2021-11-26 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes a new approach to dynamic and online risk assessment of automated and autonomous marine systems, taking into account different environmental and operational conditions. The book presents lessons learnt from dynamic positioning incidents and accidents, and discusses the challenges of risk assessment of complex systems. The book begins by introducing dynamic and online risk assessment, before presenting automated and autonomous marine systems, as well as numerous dynamic positioning incidents. It then discusses human interactions with technology and explores how to quantify human error. Dynamic probabilistic risk assessment and online risk assessment are both considered fully, including case studies with the application of assisting operators in decision making in emergency situations. Finally, areas for future research are suggested. This practical volume offers tools and methodologies to help operators make better decisions and improve the safety of automated and autonomous marine systems. It provides a guideline for researchers and practitioners to perform dynamic probabilistic and online risk assessment, which also should be applicable to other complex systems outside the marine and maritime domain, such as nuclear power plants, chemical processes, autonomous transport systems, and space shuttles.
Download or read book Automation for the Maritime Industries written by Jesús De la Cruz and published by Joaquin Aranda. This book was released on 2004 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Ocean Engineering written by Weicheng Cui and published by Springer Nature. This book was released on 2022-06-29 with total page 2203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia adopts a wider definition for the concept of ocean engineering. Specifically, it includes (1) offshore engineering: fixed and floating offshore oil and gas platforms; pipelines and risers; cables and moorings; buoy technology; foundation engineering; ocean mining; marine and offshore renewable energy; aquaculture engineering; and subsea engineering; (2) naval architecture: ship and special marine vehicle design; intact and damaged stability; technology for energy efficiency and green shipping; ship production technology; decommissioning and recycling; (3) polar and Arctic Engineering: ice mechanics; ice-structure interaction; polar operations; polar design; environmental protection; (4) underwater technologies: AUV/ROV design; AUV/ROV hydrodynamics; maneuvering and control; and underwater-specific communicating and sensing systems for AUV/ROVs. It summarizes the A–Z of the background and application knowledge of ocean engineering for use by ocean scientists and ocean engineers as well as nonspecialists such as engineers and scientists from all disciplines, economists, students, and politicians. Ocean engineering theories, ocean devices and equipment, ocean design and operation technologies are described by international experts, many from industry and each entry offers an introduction and references for further study, making current technology and operating practices available for future generations to learn from. The book also furthers our understanding of the current state of the art, leading to new and more efficient technologies with breakthroughs from new theory and materials. As the land resources approach the exploitation limit, ocean resources are becoming the next choice for the sustainable development. As such, ocean engineering is vital in the 21st century.
Download or read book Dynamics and Control of Mechanical Systems in Offshore Engineering written by Wei He and published by Springer Science & Business Media. This book was released on 2013-10-02 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics and Control of Mechanical Systems in Offshore Engineering is a comprehensive treatment of marine mechanical systems (MMS) involved in processes of great importance such as oil drilling and mineral recovery. Ranging from nonlinear dynamic modeling and stability analysis of flexible riser systems, through advanced control design for an installation system with a single rigid payload attached by thrusters, to robust adaptive control for mooring systems, it is an authoritative reference on the dynamics and control of MMS. Readers will gain not only a complete picture of MMS at the system level, but also a better understanding of the technical considerations involved and solutions to problems that commonly arise from dealing with them. The text provides: · a complete framework of dynamical analysis and control design for marine mechanical systems; · new results on the dynamical analysis of riser, mooring and installation systems together with a general modeling method for a class of MMS; · a general method and strategy for realizing the control objectives of marine systems with guaranteed stability the effectiveness of which is illustrated by extensive numerical simulation; and · approximation-based control schemes using neural networks for installation of subsea structures with attached thrusters in the presence of time-varying environmental disturbances and parametric uncertainties. Most of the results presented are analytical with repeatable design algorithms with proven closed-loop stability and performance analysis of the proposed controllers is rigorous and detailed. Dynamics and Control of Mechanical Systems in Offshore Engineering is primarily intended for researchers and engineers in the system and control community, but graduate students studying control and marine engineering will also find it a useful resource as will practitioners working on the design, running or maintenance of offshore platforms.
Download or read book Proceedings of the 2015 Chinese Intelligent Automation Conference written by Zhidong Deng and published by Springer. This book was released on 2015-04-20 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 2015 Chinese Intelligent Automation Conference presents selected research papers from the CIAC’15, held in Fuzhou, China. The topics include adaptive control, fuzzy control, neural network based control, knowledge based control, hybrid intelligent control, learning control, evolutionary mechanism based control, multi-sensor integration, failure diagnosis, reconfigurable control, etc. Engineers and researchers from academia, industry and the government can gain valuable insights into interdisciplinary solutions in the field of intelligent automation.
Download or read book Macondo Well Deepwater Horizon Blowout written by National Research Council and published by National Academies Press. This book was released on 2012-03-02 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.
