Download or read book Dynamic Modeling and Boundary Control of Flexible Axially Moving System written by Yu Liu and published by Springer Nature. This book was released on 2023-01-13 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objectives of the book are to introduce the design method of boundary control strategies for the axially moving structures to reduce their vibration. This book provides the reader with a thorough grounding in the boundary controller design. Our goal is to provide advanced boundary controller design methods and their stability analysis methods and offer simulation examples and MATLAB programs for each boundary control algorithm. For each chapter, several engineering application examples are given and the contents of each chapter in this book are independent, so that readers can just read their own needs. In this book, all the control algorithms and their programs are described separately and classified by the chapter name, which can be run successfully in MATLAB. The book can benefit researchers, engineers, and graduate students in the fields of PDE modeling and boundary vibration control of flexible structures.
Download or read book PDE Modeling and Boundary Control for Flexible Mechanical System written by Zhijie Liu and published by Springer Nature. This book was released on 2020-03-16 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive review of fundamental issues in the dynamical modeling and vibration control design for several flexible mechanical systems, such as flexible satellites, flexible aerial refueling hoses, and flexible three-dimensional manipulators. Offering an authoritative reference guide to the dynamics and control of flexible mechanical systems, it equips readers to solve a host of problems concerning these systems. It provides not only a complete overview of flexible systems, but also a better understanding of the technical levels involved. The book is divided into ten chapters: Chapters 1 and 2 lay the foundations, while the remaining chapters explore several independent yet related topics in detail. The book’s final chapter presents conclusions and recommendations for future research. Given its scope, the book is intended for researchers, graduate students, and engineers whose work involves control systems, flexible mechanical systems, and related areas.
Download or read book Control of Axially Moving Systems written by Keum-Shik Hong and published by Springer Nature. This book was released on 2021-10-19 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guideline on dynamic analysis and vibration control of axially moving systems. First, the mathematical models of various axially moving systems describing the string, beam, belt, and plate models are developed. Accordingly, dynamical issues such as the equilibrium configuration, critical velocity, stability, bifurcation, and further chaotic dynamics are analyzed. Second, this book covers the design of the control schemes based on the hitherto control strategies for axially moving systems: feedback control using the transfer function, variable structure control, control by regulating the axial velocity, wave cancellation approach, boundary control using the Lyapunov method, adaptive control, and hybrid control methods. Finally, according to the contents discussed in the book, specific aspects are outlined for initiating future research endeavors to be undertaken concerning axially moving systems. This book is useful to graduate students and researchers in industrial sectors such as continuous manufacturing systems, transport systems, power transmission systems, and lifting systems not to mention in academia.
Download or read book Distributed Parameter Modeling and Boundary Control of Flexible Manipulators written by Jinkun Liu and published by Springer. This book was released on 2018-04-16 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book investigates fundamental issues in flexible manipulator systems, including distributed parameter modeling and boundary controller design. It presents theoretical explorations of several fundamental problems concerning the dynamics and control of these systems. By integrating fresh concepts and results to form a systematic approach to control, it also provides a basic theoretical framework. In turn, the book offers a comprehensive treatment of flexible manipulator systems, addressing topics ranging from related distributed parameter modeling and advanced boundary controller design for these systems with input constraint, to active control with output constraint. In brief, the book addresses dynamical analysis and control design for flexible manipulator systems. Though primarily intended for researchers and engineers in the control system and mechanical engineering community, it can also serve as supplemental reading on the modeling and control of flexible manipulator systems at the postgraduate level.
Download or read book Boundary Control of Flexible Three Dimensional Euler Bernoulli Beams written by Ning Ji and published by Springer Nature. This book was released on 2022-03-24 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on vibration suppression of flexible three-dimensional Euler–Bernoulli beams modeled by PDEs. Boundary control strategy and several control methods are proposed to stabilize the closed-loop system. Besides, some common engineering problems such as input constraint and output constraint are also considered in the control scheme design. This book offers a comprehensive introduction of the modeling process, controller design, stability analysis and numerical simulation. The detailed MATLAB codes in each chapter are also provided, which can make readers better understand the control flow of the system. This book is mainly targeted for researchers, senior undergraduate students and postgraduate students in the field of control theory and control engineering.
Download or read book Vibration Control Methods of Mechanical Distributed Parameter Systems written by Xueyan Xing and published by Springer Nature. This book was released on 2021-05-18 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at investigating PDE modeling and vibration control of some typical mechanical distributed parameter systems. Several control methods are proposed to realize stabilization of the closed-loop system with the help of mathematical tools and stability analysis methods. Besides, some common engineering problems, such as input and output constraints, are also involved in the control design. This book offers a comprehensive introduction of mechanical distributed parameter systems, including PDE modeling, controller design and stability analysis. The related fundamental mathematical tools and analytical approaches involving in the PDE modeling and controller are also provided, which broadens its reach to readers.
Download or read book Dynamics of the Axially Moving Orthotropic Web written by Krzysztof Marynowski and published by Springer Science & Business Media. This book was released on 2010-07-07 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: A material continuum moving axially at high speed can be met in numerous different technical applications. These comprise band saws, web papers during manufacturing, processing and printing processes, textile bands during manufacturing and processing, pipes transporting fluids, transmission belts as well as flat objects moving at high speeds in space. In all these so varied technical applications, the maximum transport speed or the transportation speed is aimed at in order to increase efficiency and optimize investment and performance costs of sometimes very expensive and complex machines and installations. The dynamic behavior of axially moving systems very often hinders from reaching these aims. The book is devoted to dynamics of axially moving material objects of low flexural stiffness that are referred to as webs. Webs are moving at high speed, for example, in paper production the paper webs are transported with longitudinal speeds of up to 3000 m/min. Above the critical speed one can expect various dynamical instabilities mainly of divergent and flutter type. The up-to-date state of investigations conducted in the field of the axially moving system dynamics is presented in the beginning of the book. Special attention is paid on nonlinear dynamic investigations of translating systems. In the next chapters various mathematical models that can be employed in dynamic investigations of such objects and the results of analysis of the dynamic behavior of the axially moving orthotropic material web are presented. To make tracing the dynamic considerations easier, a paper web is the main object of investigations in the book.
Download or read book Lyapunov Based Control of Mechanical Systems written by Marcio S. de Queiroz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of nonlinear controllers for mechanical systems has been an ex tremely active area of research in the last two decades. From a theoretical point of view, this attention can be attributed to their interesting dynamic behavior, which makes them suitable benchmarks for nonlinear control the oreticians. On the other hand, recent technological advances have produced many real-world engineering applications that require the automatic con trol of mechanical systems. the mechanism for de Often, Lyapunov-based techniques are utilized as veloping different nonlinear control structures for mechanical systems. The allure of the Lyapunov-based framework for mechanical system control de sign can most likely be assigned to the fact that Lyapunov function candi dates can often be crafted from physical insight into the mechanics of the system. That is, despite the nonlinearities, couplings, and/or the flexible effects associated with the system, Lyapunov-based techniques can often be used to analyze the stability of the closed-loop system by using an energy like function as the Lyapunov function candidate. In practice, the design procedure often tends to be an iterative process that results in the death of many trees. That is, the controller and energy-like function are often constructed in concert to foster an advantageous stability property and/or robustness property. Fortunately, over the last 15 years, many system the ory and control researchers have labored in this area to produce various design tools that can be applied in a variety of situations.
Download or read book Dynamics and Control of Mechanical Systems in Offshore Engineering written by Wei He and published by Springer Science & Business Media. This book was released on 2013-10-02 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics and Control of Mechanical Systems in Offshore Engineering is a comprehensive treatment of marine mechanical systems (MMS) involved in processes of great importance such as oil drilling and mineral recovery. Ranging from nonlinear dynamic modeling and stability analysis of flexible riser systems, through advanced control design for an installation system with a single rigid payload attached by thrusters, to robust adaptive control for mooring systems, it is an authoritative reference on the dynamics and control of MMS. Readers will gain not only a complete picture of MMS at the system level, but also a better understanding of the technical considerations involved and solutions to problems that commonly arise from dealing with them. The text provides: · a complete framework of dynamical analysis and control design for marine mechanical systems; · new results on the dynamical analysis of riser, mooring and installation systems together with a general modeling method for a class of MMS; · a general method and strategy for realizing the control objectives of marine systems with guaranteed stability the effectiveness of which is illustrated by extensive numerical simulation; and · approximation-based control schemes using neural networks for installation of subsea structures with attached thrusters in the presence of time-varying environmental disturbances and parametric uncertainties. Most of the results presented are analytical with repeatable design algorithms with proven closed-loop stability and performance analysis of the proposed controllers is rigorous and detailed. Dynamics and Control of Mechanical Systems in Offshore Engineering is primarily intended for researchers and engineers in the system and control community, but graduate students studying control and marine engineering will also find it a useful resource as will practitioners working on the design, running or maintenance of offshore platforms.
Download or read book Active Vibration Control and Stability Analysis of Flexible Beam Systems written by Wei He and published by Springer. This book was released on 2018-12-17 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theoretical explorations of several fundamental problems in the dynamics and control of flexible beam systems. By integrating fresh concepts and results to form a systematic approach to control, it establishes a basic theoretical framework. It includes typical control design examples verified using MATLAB simulation, which in turn illustrate the successful practical applications of active vibration control theory for flexible beam systems. The book is primarily intended for researchers and engineers in the control system and mechanical engineering community, offering them a unique resource.
Download or read book The Mechanical Systems Design Handbook written by Yildirim Hurmuzlu and published by CRC Press. This book was released on 2017-12-19 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a specific focus on the needs of the designers and engineers in industrial settings, The Mechanical Systems Design Handbook: Modeling, Measurement, and Control presents a practical overview of basic issues associated with design and control of mechanical systems. In four sections, each edited by a renowned expert, this book answers diverse questions fundamental to the successful design and implementation of mechanical systems in a variety of applications. Manufacturing addresses design and control issues related to manufacturing systems. From fundamental design principles to control of discrete events, machine tools, and machining operations to polymer processing and precision manufacturing systems. Vibration Control explores a range of topics related to active vibration control, including piezoelectric networks, the boundary control method, and semi-active suspension systems. Aerospace Systems presents a detailed analysis of the mechanics and dynamics of tensegrity structures Robotics offers encyclopedic coverage of the control and design of robotic systems, including kinematics, dynamics, soft-computing techniques, and teleoperation. Mechanical systems designers and engineers have few resources dedicated to their particular and often unique problems. The Mechanical Systems Design Handbook clearly shows how theory applies to real world challenges and will be a welcomed and valuable addition to your library.
Download or read book Advances in Guidance Navigation and Control written by Liang Yan and published by Springer Nature. This book was released on 2021-11-12 with total page 5416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features the latest theoretical results and techniques in the field of guidance, navigation, and control (GNC) of vehicles and aircraft. It covers a range of topics, including, but not limited to, intelligent computing communication and control; new methods of navigation, estimation, and tracking; control of multiple moving objects; manned and autonomous unmanned systems; guidance, navigation, and control of miniature aircraft; and sensor systems for guidance, navigation, and control. Presenting recent advances in the form of illustrations, tables, and text, it also provides detailed information of a number of the studies, to offer readers insights for their own research. In addition, the book addresses fundamental concepts and studies in the development of GNC, making it a valuable resource for both beginners and researchers wanting to further their understanding of guidance, navigation, and control.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Modeling and Active Vibration Control of a Planar 3 PRR Parallel Manipulator with Three Flexible Links written by Xuping Zhang and published by . This book was released on 2009 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the advantages of parallel manipulators and lightweight manipulators, a 3-PRR planar parallel manipulator with three lightweight intermediate links has been developed to provide an alternative high-speed pick-and-place positioning mechanism to serial architecture manipulators in electronic manufacturing, such as X-Y tables or gantry robots. Lightweight members are more likely to exhibit structural defection and vibrate due to the inertial forces from high speed motion, and external forces from actuators. Structural flexibility effects are much more pronounced at high operational speeds and accelerations. Therefore, this thesis presents the dynamics and vibration control of a 3-PRR parallel manipulator with three flexible links.Secondly, this thesis presents the investigation on dynamic stiffening and buckling of the flexible links of a 3-PRR parallel manipulator by including the effect of ii longitudinal forces on the modal characteristics. Natural frequencies of bending vibration of the intermediate links are derived as the functions of axial force and rigid-body motion of the manipulator. Dynamic stiffening and buckling of intermediate links is investigated and configuration-dependent frequencies are analyzed. Furthermore, using Lagrange multipliers, the fully coupled equations of motions of the flexible parallel manipulator are developed by incorporating the rigid body motions with elastic motions. The mutual dependence of elastic deformations and rigid body motions are investigated from the analysis of the derived equations of motion. Open-loop simulation without joint motion controls and closed-loop simulation with joint motion controls are performed to illustrate the effect of elastic motion on rigid body motions and the coupling effect amongst flexible links. These analyses and results provide valuable insight into the design and control of the parallel manipulator with flexible intermediate links.Thirdly, an active vibration control strategy is developed for a moving 3-PRR parallel manipulator with flexible links, each of which is equipped with multiple PZT control pairs. The active vibration controllers are designed using the modal strain rate feedback (MSRF). The amplification behavior of high modes is addressed, and the control gain selection strategy for high modes is developed through modifying the IMSC method. The filters are developed for the on-line estimation of modal coordinates and modal velocity. The second compensator is used to cut off the amplified noises and unmodeled dynamics due to the differentiation operation in the developed controller. The modal coupling behavior of intermediate links is examined with the modal analysis of vibrations measured by the PZT sensors. The error estimation of the moving platform is examined using the measurement of PZT sensors.Finally, an active vibration control experimental system is built to implement the active vibration control of a moving 3-PRR parallel manipulator with three flexible links. The smart structures are built through mounting three PZT control pairs to each intermediate flexible link. The active vibration control system is set up using National Instruments LabVIEW Real-Time Module. Active vibration control experiments are conducted for the manipulator moving with high-speed, and experimental results demonstrate that the vibration of each link is significantly reduced.Firstly, a procedure for the generation of dynamic equations for a 3-PRR parallel manipulator with three flexible intermediate links is presented based on the assumed mode method. The dynamic equations of the parallel manipulator with three flexible intermediate links are developed using pinned-pinned boundary conditions. Experimental modal tests are performed using an impact hammer and an accelerometer to identify the mode shapes, frequencies, and damping ratios of flexible intermediate links. The mode shapes and frequencies, obtained from experimental modal tests, match very well the assumed mode shapes and frequencies obtained based on pinned-pinned boundary conditions, and therefore the dynamic model developed is validated.
Download or read book Dynamics and Control of Industrial Cranes written by Keum-Shik Hong and published by Springer. This book was released on 2019-01-30 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces and develops the mathematical models used to describe crane dynamics, and explores established and emerging control methods employed for industrial cranes. It opens with a general introduction to the design and structure of various crane types including gantry cranes, rotary cranes, and mobile cranes currently being used for material handling processes. Mathematical models describing their dynamics for control purposes are developed via two different modeling approaches: lumped-mass and distributed parameter models. Control strategies applicable to real industrial problems are then discussed, including open-loop control, feedback control, boundary control, and hybrid control strategies. Finally, based on the methods covered in the book, future research directions are proposed for the advancement of crane technologies. This book can be used by graduate students, engineers, and researchers in the material handling industry including those working in warehouses, manufacturing, construction sites, ship building, seaports, container terminals, nuclear power plants, and in offshore engineering.
Download or read book On the Energetics and Vibration Control of Axially Moving Elastic Systems written by Seung-Yop Lee and published by . This book was released on 1995 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Modelling of Advanced Structures and Smart Systems written by Holm Altenbach and published by Springer. This book was released on 2017-11-27 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers presented at the 8th International Conference "Design, Modeling and Experiments of Advanced Structures and Systems" (DeMEASS VIII, held in Moscow, Russia in May 2017) and reflects the modern state of sciences in this field. The contributions contain topics like Piezoelectric, Ferroelectric, Ferroelastic and Magnetostrictive Materials, Shape Memory Alloys and Active Polymers, Functionally Graded Materials, Multi-Functional Smart Materials and Structures, Coupled Multi-Field Problems, Design and Modeling of Sensors and Actuators, Adaptive Structures.