Download or read book Dynamic Failure of Materials and Structures written by Arun Shukla and published by Springer Science & Business Media. This book was released on 2009-10-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Failure of Materials and Structures discusses the topic of dynamic loadings and their effect on material and structural failure. Since dynamic loading problems are very difficult as compared to their static counterpart, very little information is currently available about dynamic behavior of materials and structures. Topics covered include the response of both metallic as well as polymeric composite materials to blast loading and shock loadings, impact loadings and failure of novel materials under more controlled dynamic loads. These include response of soft materials that are important in practical use but have very limited information available on their dynamic response. Dynamic fragmentation, which has re-emerged in recent years has also been included. Both experimental as well as numerical aspects of material and structural response to dynamic loads are discussed. Written by several key experts in the field, Dynamic Failure of Materials and Structures will appeal to graduate students and researchers studying dynamic loadings within mechanical and civil engineering, as well as in physics and materials science.
Download or read book Dynamic Failure of Materials written by H.P. Rossmanith and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid pace of current developments in the theoretical, analytical, numerical and experimental fields of dynamic failure of materials called for an international seminar of workshop style aimed at improving the finding and understanding of solutions to the basic physical processes involved in dynamic failure. The Vienna Seminar DFM-l was held at the Technical University Vienna in the historic administration building in the city center under the auspices of the university. More than 30 international experts from all over the world followed the invitation to participate at this seminar. High in the list of priorities was the common desire for ample time for discussions after each technical presenta tion, a fact and a chance frequently made overextensive use of during the seminar. Thus, opportunity was given to the seminar participants to present and expose ideas and results of their original research work, either terminated, ongoing, proposed or conceived and intended, to an international forum of experts for critical discussions, evaluation and appraisal. The technical program included dynamic failure of polymers and steel, numerical modelling of fracture processes, experimental techniques and analytical/numerical investigation of crack/wave interaction problems. The scope of the contributions stretched from implementation of advanced mathematical techniques in the theoretical developments to most direct applications in various fields of engineering practice. Papers published in this volume represent revised, updated and expanded versions of the seminar contributions.
Download or read book Dynamic Failure of Composite and Sandwich Structures written by Serge Abrate and published by Springer Science & Business Media. This book was released on 2012-11-02 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad view of the current state of the art regarding the dynamic response of composite and sandwich structures subjected to impacts and explosions. Each chapter combines a thorough assessment of the literature with original contributions made by the authors. The first section deals with fluid-structure interactions in marine structures. The first chapter focuses on hull slamming and particularly cases in which the deformation of the structure affects the motion of the fluid during the water entry of flexible hulls. Chapter 2 presents an extensive series of tests underwater and in the air to determine the effects of explosions on composite and sandwich structures. Full-scale structures were subjected to significant explosive charges, and such results are extremely rare in the open literature. Chapter 3 describes a simple geometrical theory of diffraction for describing the interaction of an underwater blast wave with submerged structures. The second section addresses the problem of impact on laminated composite structures with chapters devoted to ballistic impacts on pre-stressed composite structures, tests developed to simulate dynamic failure in marine structures, damage mechanisms and energy absorption in low velocity impacts, perforation, the numerical simulation of intra and inter-ply damage during impact, and hail impact on laminated composites. Sandwich structures with laminated facings are considered in Section 3 with chapters dealing with the discrete modeling of honeycomb core during the indentation of sandwich structures, the behavior of fold core sandwich structures during impact, and impact on helicopter blades. The fourth section consists of two chapters presenting experimental results and numerical simulation of composite structures subjected to crash. This volume is intended for advanced undergraduate and graduate students, researchers, and engineers interested and involved in analysis and design of composite structures.
Download or read book Dynamic Analysis and Failure Modes of Simple Structures written by Daniel Schiff and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers practical coverage of vibration stresses and stress-induced displacements, isolation of sensitive components, and evaluation of elastic instability, fatigue and fracture as potential failure modes that arise in mechanical designs and aerospace. The approach taken is particularly useful in the early design stage--the physical problem is defined via known paramaters and a methodology is given for determining the unknown quantities and relating them to specified limiting values and failure modes to obtain an acceptable design. Many of the calculations can be performed on a PC or programmable calculator.
Download or read book Thirty fourth International Symposium for Testing and Failure Analysis written by ASM International and published by ASM International. This book was released on 2008-01-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture Fatigue Failure and Damage Evolution Volume 3 written by Shuman Xia and published by Springer Nature. This book was released on 2021-03-26 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture, Fatigue, Failure and Damage Evolution, Volume 3 of the Proceedings of the 2020 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of seven from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Novel Experimental Methods Extreme Environments Interfacial Fracture Integration of Models & Experiments Mechanics of Energy & Energetic Materials Integration of Models & Experiments In Situ Techniques for Fatigue & Fracture Microscale & Microstructural Effects on Mechanical Behavior
Download or read book Spatial Modelling and Failure Analysis of Natural and Engineering Disasters through Data based Methods written by Faming Huang and published by Frontiers Media SA. This book was released on 2022-10-07 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Failure in Composites written by Anthony M. Waas and published by DEStech Publications, Inc. This book was released on 2013 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth volume of the ASC series on advanced composites contains critical information on static and dynamic composite failure and how it is predicted and modeled using novel computational methods and micromechanical analysis.
Download or read book Handbook of Materials Failure Analysis with Case Studies from the Aerospace and Automotive Industries written by Abdel Salam Hamdy Makhlouf and published by Butterworth-Heinemann. This book was released on 2015-09-01 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Materials Failure Analysis: With Case Studies from the Aerospace and Automotive Industries provides a thorough understanding of the reasons materials fail in certain situations, covering important scenarios, including material defects, mechanical failure as a result of improper design, corrosion, surface fracture, and other environmental causes. The book begins with a general overview of materials failure analysis and its importance, and then logically proceeds from a discussion of the failure analysis process, types of failure analysis, and specific tools and techniques, to chapters on analysis of materials failure from various causes. Later chapters feature a selection of newer examples of failure analysis cases in such strategic industrial sectors as aerospace, oil & gas, and chemicals. Covers the most common types of materials failure, analysis, and possible solutions Provides the most up-to-date and balanced coverage of failure analysis, combining foundational knowledge, current research on the latest developments, and innovations in the field Ideal accompaniment for those interested in materials forensic investigation, failure of materials, static failure analysis, dynamic failure analysis, fatigue life prediction, rotorcraft, failure prediction, fatigue crack propagation, bevel pinion failure, gasketless flange, thermal barrier coatings Presents compelling new case studies from key industries to demonstrate concepts Highlights the role of site conditions, operating conditions at the time of failure, history of equipment and its operation, corrosion product sampling, metallurgical and electrochemical factors, and morphology of failure
Download or read book Dynamic Failure of Materials written by International Seminar on Dynamic Failure of and published by . This book was released on 1991 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Failure and Plasticity written by X.L. Zhao and published by Elsevier. This book was released on 2000-10-04 with total page 913 pages. Available in PDF, EPUB and Kindle. Book excerpt: As mankind continues to push back the boundaries and begins to explore other worlds and the ocean depths, a thorough understanding of how structures behave when subjected to extremes in temperature, pressure, and high loading rates will be essential. This symposium provided the perfect forum for presenting research into structures subjected to such extreme loads. There were a large number of papers presented under topics of impact, blast and shock loading, indicating a strong research interest in high rates of loading. Similarly new topics have been added to the traditional symposium list such as fire loading, earthquake loading, and fatigue and connection failures. It is clear now that fundamental knowledge of plastic deformation of structures to various extreme loads is coming of age. Each full paper was peer reviewed by at least two experts in the field.
Download or read book Structural Crashworthiness and Failure written by N. Jones and published by CRC Press. This book was released on 2010-02-25 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains twelve invited lectures from the Third International Symposium on Structural Crashworthiness. Particular emphasis is given to the failure predictions for ductile metal structures under large dynamic loads and to the behaviour of composite and cellular structures.
Download or read book Failure Characteristics Analysis and Fault Diagnosis for Liquid Rocket Engines written by Wei Zhang and published by Springer. This book was released on 2016-05-25 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on the subject of health monitoring technology of Liquid Rocket Engine (LRE), including its failure analysis, fault diagnosis and fault prediction. Since no similar issue has been published, the failure pattern and mechanism analysis of the LRE from the system stage are of particular interest to the readers. Furthermore, application cases used to validate the efficacy of the fault diagnosis and prediction methods of the LRE are different from the others. The readers can learn the system stage modeling, analyzing and testing methods of the LRE system as well as corresponding fault diagnosis and prediction methods. This book will benefit researchers and students who are pursuing aerospace technology, fault detection, diagnostics and corresponding applications.
Download or read book Dynamic Behavior of Materials Volume 1 written by Vijay Chalivendra and published by Springer Science & Business Media. This book was released on 2012-09-26 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on Challenges in Mechanics of Time -Dependent Materials and Processes in Conventional and Multifunctional Materials, Imaging Methods for Novel Materials and Challenging Applications, Experimental and Applied Mechanics, 2nd International Symposium on the Mechanics of Biological Systems and Materials 13th International Symposium on MEMS and Nanotechnology and, Composite Materials and the 1st International Symposium on Joining Technologies for Composites.
Download or read book Practical Handbook of Rock Mass Classification Systems and Modes of Ground Failure written by Andy Afrouz and published by CRC Press. This book was released on 1992-06-10 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Handbook of Rock Mass Classification Systems and Modes of Ground Failure is a comprehensive, yet concise, guide to 16 of the most important rock classification systems and their failure modes. The book discusses these systems in relation to the design of excavations and ground reinforcement/support under passive, active, static, and dynamic mining conditions. This includes rock testing assessment, surface and underground site investigation, and any practical activity that deals with the physical and mechanical properties of rocks. The book is an excellent professional reference for geoscientists, technicians, and geological engineers doing research and consulting in mining, geological, civil, and petroleum resource fields.
Download or read book Rock Failure Mechanisms written by Chun'An Tang and published by CRC Press. This book was released on 2010-08-06 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: When dealing with rock in civil engineering, mining engineering and other engineering, the process by which the rock fails under load should be understood, so that safe structures can be built on and in the rock. However, there are many ways for loading rock and rock can have a variety of idiosyncracies. This reference book provides engineers and r
Download or read book Modeling of Material Damage and Failure of Structures written by Jacek J. Skrzypek and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: An extensive and comprehensive survey of one- and three-dimensional damage models for elastic and inelastic solids. The book not only provides a rich current source of knowledge, but also describes examples of practical applications, numerical procedures, and computer codes. The style throughout is systematic, clear, and concise, and supported by illustrative diagrams. The state of the art is given by some 200 references.