Download or read book Dynamic Decoupling of Robot Manipulators written by Vigen Arakelian and published by Springer. This book was released on 2018-02-20 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest results in the field of dynamic decoupling of robot manipulators obtained in France, Russia, China and Austria. Manipulator dynamics can be highly coupled and nonlinear. The complicated dynamics result from varying inertia, interactions between the different joints, and nonlinear forces such as Coriolis and centrifugal forces. The dynamic decoupling of robot manipulators allows one to obtain a linear system, i.e. single-input and single output system with constant parameters. This simplifies the optimal control and accumulation of energy in manipulators. There are two ways to create the dynamically decoupled manipulators: via optimal mechanical design or control. This work emphasises mechatronic solutions. These will certainly improve the known design concepts permitting the dynamic decoupling of serial manipulators with a relatively small increase in total mass of the moving links taking into account the changing payload. For the first time such an approach has been applied on serial manipulators. Also of great interest is the dynamic decoupling control of parallel manipulators. Firstly, the dynamic model of redundant multi-axial vibration table with load has been established, and, secondly, its dynamic coupling characteristics have been analyzed. The discussed methods and applications of dynamic decoupling of robot manipulators are illustrated via CAD simulations and experimental tests.
Download or read book Dynamics and Control of Autonomous Space Vehicles and Robotics written by Ranjan Vepa and published by Cambridge University Press. This book was released on 2019-05-02 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the established principles underpinning space robotics with a thorough and modern approach. This text is perfect for professionals in the field looking to gain an understanding of real-life applications of manipulators on satellites, and of the dynamics of satellites carrying robotic manipulators and of planetary rovers.
Download or read book Flexible Robot Manipulators written by M. Osman Tokhi and published by IET. This book was released on 2008-05-20 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest developmens in modelling, simulation and control of flexible robot manipulators. Coverage includes an overall review of previously developed methodologies, a range of modelling approaches including classical techniques, parametric and neuromodelling approaches and numerical modelling/simulation techniques.
Download or read book Adaptive Control of Mechanical Manipulators written by John J. Craig and published by Addison Wesley Publishing Company. This book was released on 1988 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robot Dynamics And Control written by Mark W Spong and published by John Wiley & Sons. This book was released on 2008-08-04 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-contained introduction to practical robot kinematics and dynamics includes a comprehensive treatment of robot control. It provides background material on terminology and linear transformations, followed by coverage of kinematics and inverse kinematics, dynamics, manipulator control, robust control, force control, use of feedback in nonlinear systems, and adaptive control. Each topic is supported by examples of specific applications. Derivations and proofs are included in many cases. The book includes many worked examples, examples illustrating all aspects of the theory, and problems.
Download or read book ROMANSY 24 Robot Design Dynamics and Control written by Andrés Kecskeméthy and published by Springer Nature. This book was released on 2022-06-22 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest innovations and applications in robotics, as presented by leading international researchers and engineers at the ROMANSY 2022, the 24th CISM IFToMM Symposium on Theory and Practice of Robots and Manipulators, held in Udine, Italy, on July 4–7, 2022. The ROMANSY symposium is the first established conference that focuses on robotics theory and research, rather than industrial aspects. Bringing together researchers from a broad range of countries, the symposium is held bi-annually and plays a vital role in the development of the theory and practice of robotics, as well as the mechanical sciences. ROMANSY 2022 marks the 24th instalment in a series that began in 1973.
Download or read book Foundations of Robotics written by Tsuneo Yoshikawa and published by MIT Press. This book was released on 1990 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foundations of Robotics presents the fundamental concepts and methodologies for the analysis, design, and control of robot manipulators.
Download or read book Non Adaptive and Adaptive Control of Manipulation Robots written by M. Vukobratovic and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The material presented in this monograph is a logical continuation of research results achieved in the control of manipulation robots. This is in a way, a synthesis of many-year research efforts of the associates of Robotics Department, Mihailo Pupin Institute, in the field of dynamic control.of robotic systems. As in Vol. 2 of this Series, all results rely on the mathematical models of dynamics of active spatial mechanisms which offer the possibility for adequate dynamic control of manipula tion robots. Compared with Vol. 2, this monograph has three essential new character istics, and a variety of new tasks arising in the control of robots which have been formulated and solved for the first time. One of these novelties is nonadaptive control synthesized for the case of large variations in payload parameters, under the condition that the practical stability of the overall system is satisfied. Such a case of control synthesis meets the actual today's needs in industrial robot applications. The second characteristic of the monograph is the efficient adaptive control algorithm based on decentralized control structure intended for tasks in which parameter variations cannot be specified in advance. To be objective, this is not the case in industrial robotics today. Thus, nonadaptive control with and without a particular parameter variation is supplemented by adaptive dynamic control algorithms which will cer tainly be applicable in the future industrial practice when parametric identification of workpieces will be required.
Download or read book Advanced Studies Of Flexible Robotic Manipulators Modeling Design Control And Applications written by Yanqing Gao and published by World Scientific. This book was released on 2003-08-14 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible robotic manipulators pose various challenges in research as compared to rigid robotic manipulators, ranging from system design, structural optimization, and construction to modeling, sensing, and control. Although significant progress has been made in many aspects over the last one-and-a-half decades, many issues are not resolved yet, and simple, effective, and reliable controls of flexible manipulators still remain an open quest. Clearly, further efforts and results in this area will contribute significantly to robotics (particularly automation) as well as its application and education in general control engineering. To accelerate this process, the leading experts in this important area present in this book the state of the art in advanced studies of the design, modeling, control and applications of flexible manipulators.
Download or read book Robot Force Control written by Bruno Siciliano and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the fundamental requirements for the success of a robot task is the capability to handle interaction between manipulator and environment. The quantity that describes the state of interaction more effectively is the contact force at the manipulator's end effector. High values of contact force are generally undesirable since they may stress both the manipulator and the manipulated object; hence the need to seek for effective force control strategies. The book provides a theoretical and experimental treatment of robot interaction control. In the framework of model-based operational space control, stiffness control and impedance control are presented as the basic strategies for indirect force control; a key feature is the coverage of six-degree-of-freedom interaction tasks and manipulator kinematic redundancy. Then, direct force control strategies are presented which are obtained from motion control schemes suitably modified by the closure of an outer force regulation feedback loop. Finally, advanced force and position control strategies are presented which include passivity-based, adaptive and output feedback control schemes. Remarkably, all control schemes are experimentally tested on a setup consisting of a seven-joint industrial robot with open control architecture and force/torque sensor. The topic of robot force control is not treated in depth in robotics textbooks, in spite of its crucial importance for practical manipulation tasks. In the few books addressing this topic, the material is often limited to single-degree-of-freedom tasks. On the other hand, several results are available in the robotics literature but no dedicated monograph exists. The book is thus aimed at filling this gap by providing a theoretical and experimental treatment of robot force control.
Download or read book Modelling and Control of Robot Manipulators written by Lorenzo Sciavicco and published by Springer Science & Business Media. This book was released on 2001-02-19 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental and technological topics are blended uniquely and developed clearly in nine chapters with a gradually increasing level of complexity. A wide variety of relevant problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained, step by step. Fundamental coverage includes: Kinematics; Statics and dynamics of manipulators; Trajectory planning and motion control in free space. Technological aspects include: Actuators; Sensors; Hardware/software control architectures; Industrial robot-control algorithms. Furthermore, established research results involving description of end-effector orientation, closed kinematic chains, kinematic redundancy and singularities, dynamic parameter identification, robust and adaptive control and force/motion control are provided. To provide readers with a homogeneous background, three appendices are included on: Linear algebra; Rigid-body mechanics; Feedback control. To acquire practical skill, more than 50 examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, more than 80 end-of-chapter exercises are proposed, and the book is accompanied by a solutions manual containing the MATLAB code for computer problems; this is available from the publisher free of charge to those adopting this work as a textbook for courses.
Download or read book Robot Control 1988 SYROCO 88 written by U. Rembold and published by Elsevier. This book was released on 2014-05-23 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing 88 papers, the emphasis of this volume is on the control of advanced robots. These robots may be self-contained or part of a system. The applications of such robots vary from manufacturing, assembly and material handling to space work and rescue operations. Topics presented at the Symposium included sensors and robot vision systems as well as the planning and control of robot actions. Main topics covered include the design of control systems and their implementation; advanced sensors and multisensor systems; explicit robot programming; implicit (task-orientated) robot programming; interaction between programming and control systems; simulation as a programming aid; AI techniques for advanced robot systems and autonomous robots.
Download or read book Theory and Practice of Robots and Manipulators written by A. Morecki and published by Springer. This book was released on 2014-05-04 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CISM-IFToMM Symposia have played a dynamic role in the development of the theory and practice of robotics. The proceedings of the Tenth Symposia present a world view to date of the state-of-the-art, including a unique record of the results achieved in central and eastern Europe.
Download or read book Humanoid Robots written by Dragomir N. Nenchev and published by Butterworth-Heinemann. This book was released on 2018-11-21 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humanoid Robots: Modeling and Control provides systematic presentation of the models used in the analysis, design and control of humanoid robots. The book starts with a historical overview of the field, a summary of the current state of the art achievements and an outline of the related fields of research. It moves on to explain the theoretical foundations in terms of kinematic, kineto-static and dynamic relations. Further on, a detailed overview of biped balance control approaches is presented. Models and control algorithms for cooperative object manipulation with a multi-finger hand, a dual-arm and a multi-robot system are also discussed. One of the chapters is devoted to selected topics from the area of motion generation and control and their applications. The final chapter focuses on simulation environments, specifically on the step-by-step design of a simulator using the Matlab® environment and tools. This book will benefit readers with an advanced level of understanding of robotics, mechanics and control such as graduate students, academic and industrial researchers and professional engineers. Researchers in the related fields of multi-legged robots, biomechanics, physical therapy and physics-based computer animation of articulated figures can also benefit from the models and computational algorithms presented in the book. Provides a firm theoretical basis for modelling and control algorithm design Gives a systematic presentation of models and control algorithms Contains numerous implementation examples demonstrated with 43 video clips
Download or read book Robotics and Automation Handbook written by Thomas R. Kurfess and published by CRC Press. This book was released on 2018-10-03 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the capability and utility of robots has increased dramatically with new technology, robotic systems can perform tasks that are physically dangerous for humans, repetitive in nature, or require increased accuracy, precision, and sterile conditions to radically minimize human error. The Robotics and Automation Handbook addresses the major aspects of designing, fabricating, and enabling robotic systems and their various applications. It presents kinetic and dynamic methods for analyzing robotic systems, considering factors such as force and torque. From these analyses, the book develops several controls approaches, including servo actuation, hybrid control, and trajectory planning. Design aspects include determining specifications for a robot, determining its configuration, and utilizing sensors and actuators. The featured applications focus on how the specific difficulties are overcome in the development of the robotic system. With the ability to increase human safety and precision in applications ranging from handling hazardous materials and exploring extreme environments to manufacturing and medicine, the uses for robots are growing steadily. The Robotics and Automation Handbook provides a solid foundation for engineers and scientists interested in designing, fabricating, or utilizing robotic systems.
Download or read book Mechanism Design for Robotics written by Saïd Zeghloul and published by Springer Nature. This book was released on 2021-05-08 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 5th IFToMM Symposium on Mechanism Design for Robotics, MEDER 2021, held in Poitiers, France, 23–25 June 2021. It gathers contributions by researchers from several countries on all major areas of robotic research, development and innovation, as well as new applications and current trends. The topics covered include: theoretical and computational kinematics, mechanism design, experimental mechanics, mechanics of robots, control issues of mechanical systems, machine intelligence, innovative mechanisms and applications, linkages and manipulators, micro-mechanisms, dynamics of machinery and multi-body systems. Given its scope, the book offers a source of information and inspiration for researchers seeking to improve their work and gather new ideas for future developments.
Download or read book New Advances in Mechanisms Transmissions and Applications written by Med Amine Laribi and published by Springer Nature. This book was released on 2023-04-15 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering the proceedings of the 6th IFToMM International Conference on Mechanisms, Transmissions, and Applications (MeTrApp), held in Poitiers, France, on May 24-26, 2023, this volume covers topics such as mechanism and machinery design, parallel manipulators, robotics and mechatronics, control applications, mechanical transmissions, cam and gear mechanisms, and dynamics of machinery. MeTrApp 2019 provided researchers, scientists, industry experts, and graduate students from around the globe with a platform to share their cutting-edge work on mechanisms, transmissions, and their applications. The proceedings extend this platform to all researchers, scientists, industry experts, and students interested in these fields.
