Download or read book Dynamic and Fatigue Assessment of Heavy Duty Engine Valves written by Angelina Eret and published by Springer Nature. This book was released on 2024-02-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides findings on the simulation of the valve dynamic to the current technological standards. Above all, it delivers a simulation based and predictive approach on the fatigue strength assessment of four-stroke heavy-duty engine valves. The demand for more efficient combustion engines with fuel flexibility goes along with increasing component requirements regarding strength and durability, while the development costs should remain low. In this context, the present book focuses on the gas exchange valves of heavy-duty engines. Especially, the valves on the exhaust side have an increased risk of fatigue failure. The aim of this book is the generation of a predictive fatigue strength assessment to strengthen the frontloading of the exhaust valve design process and to increase the reliability of the component. In the context of fatigue assessment, this book examines the loads of the exhaust valve during its working cycle. Beside the high temperature and cylinder pressure, further loads act on the exhaust valve like actuation force or an eccentric impact of the valve on the valve seat ring. Furthermore, a bold valve secondary dynamic in the form of valve bending vibrations is observed on the exhaust valves of heavy-duty engines increasing the valve load even more. The cause of this secondary dynamic is unknown. This book investigates the valve loads to get the necessary input for the fatigue strength assessment. With respect to a predictive approach, the determination of valve dynamic and valve loads is based on a multibody simulation model of the valve train. In order to deliver predictive results and a transferable method, this simulation model includes all relevant physical effects to describe the valve dynamic accurately during all valve load phases of the working cycle. With the simulation model, the root cause for the bold valve secondary dynamic is examined iteratively. The model delivers not only the cause for the valve secondary dynamic but most importantly the critical valve loads. These loads deliver the input for the fatigue strength assessment. To ensure the robustness of the load data determined by the simulation model, the sensitivity of influences on the valve load is examined. In this context geometrical misalignment, fluctuations in load data and variable engine operation points are considered. A load collective based on the variation of influences on the valve load is the result of this analysis. All the results of the influence and sensitivity study are generated with the newly developed simulation model of the valve train. Moreover, this book outlines measurements on a testbed engine. In scope of these measurements are temperature and strain measurements of the valve. The generated data validate the simulation model of the valve train. Additionally, the statistical evaluation of the data is used in the subsequent fatigue strength assessment to increase the reliability of the results.
Download or read book Proceedings of Fatigue Durability and Fracture Mechanics written by S. Seetharamu and published by Springer. This book was released on 2017-11-01 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of Fatigue Durability India 2016, which was held on September 28–30 at J N Tata Auditorium, Indian Institute of Science, Bangalore. This 2nd International Conference & Exhibition brought international industrial experts and academics together on a single platform to facilitate the exchange of ideas and advances in the field of fatigue, durability and fracture mechanics and its applications. This book comprises articles on a broad spectrum of topics from design, engineering, testing and computational evaluation of components and systems for fatigue, durability, and fracture mechanics. The topics covered include interdisciplinary discussions on working aspects related to materials testing, evaluation of damage, nondestructive testing (NDT), failure analysis, finite element modeling (FEM) analysis, fatigue and fracture, processing, performance, and reliability. The contents of this book will appeal not only to academic researchers, but also to design engineers, failure analysts, maintenance engineers, certification personnel, and R&D professionals involved in a wide variety of industries.
Download or read book 25th Annual Conference on Composites Advanced Ceramics Materials and Structures A Volume 22 Issue 3 written by Mrityunjay Singh and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Design and Development of Heavy Duty Diesel Engines written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on 2019-11-05 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as a comprehensive reference on the design and development of diesel engines. It talks about combustion and gas exchange processes with important references to emissions and fuel consumption and descriptions of the design of various parts of an engine, its coolants and lubricants, and emission control and optimization techniques. Some of the topics covered are turbocharging and supercharging, noise and vibrational control, emission and combustion control, and the future of heavy duty diesel engines. This volume will be of interest to researchers and professionals working in this area.
Download or read book Research Technology 2000 written by and published by DIANE Publishing. This book was released on with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Highway Safety Literature written by and published by . This book was released on 1974 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2006 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Integrity and Fatigue Failure Analysis written by Grzegorz Lesiuk and published by Springer Nature. This book was released on 2022-05-04 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains full papers presented at the First Virtual Conference on Mechanical Fatigue (VCMF 2020), which was organised by the University of Porto (FEUP, Portugal), the Wroclaw University of Science and Technology (Poland), University of Electronic Science and Technology of China (China), Siberian Federal University (Russia), and the ESIS/TC12 Technical Committee (European Structural Integrity Society–ESIS), between 9 and 11 of September 2020. This conference was intended to be a forum of discussion of new research concepts, equipment, technology, materials and structures and other scientific advances within the field of mechanical fatigue and fracture. The first edition of the VCMF 2020 event has reached more than 60 participants from more than 20 nationalities demonstrating the vitality of this new event.
Download or read book Tribological Processes in the Valve Train Systems with Lightweight Valves written by Krzysztof Jan Siczek and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribological Processes in Valvetrain Systems with Lightweight Valves: New Research and Modelling provides readers with the latest methodologies to reduce friction and wear in valvetrain systems—a severe problem for designers and manufacturers. The solution is achieved by identifying the tribological processes and phenomena in the friction nodes of lightweight valves made of titanium alloys and ceramics, both cam and camless driven. The book provides a set of structured information on the current tribological problems in modern internal combustion engines—from an introduction to the valvetrain operation to the processes that produce wear in the components of the valvetrain. A valuable resource for teachers and students of mechanical or automotive engineering, as well as automotive manufacturers, automotive designers, and tuning engineers. - Shows the tribological problems occurring in the guide-light valve-seat insert - Combines numerical and experimental solutions of wear and friction processes in valvetrain systems - Discusses various types of cam and camless drives the valves used in valve trains of internal combustion engines—both SI and CI - Examines the materials used, protective layers and geometric parameters of lightweight valves, as well as mating guides and seat inserts
Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 2000 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Automotive Engineering written by and published by John Wiley & Sons. This book was released on 2015-03-23 with total page 3888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erstmals eine umfassende und einheitliche Wissensbasis und Grundlage für weiterführende Studien und Forschung im Bereich der Automobiltechnik. Die Encyclopedia of Automotive Engineering ist die erste umfassende und einheitliche Wissensbasis dieses Fachgebiets und legt den Grundstein für weitere Studien und tiefgreifende Forschung. Weitreichende Querverweise und Suchfunktionen ermöglichen erstmals den zentralen Zugriff auf Detailinformationen zu bewährten Branchenstandards und -verfahren. Zusammenhängende Konzepte und Techniken aus Spezialbereichen lassen sich so einfacher verstehen. Neben traditionellen Themen des Fachgebiets beschäftigt sich diese Enzyklopädie auch mit "grünen" Technologien, dem Übergang von der Mechanik zur Elektronik und den Möglichkeiten zur Herstellung sicherer, effizienterer Fahrzeuge unter weltweit unterschiedlichen wirtschaftlichen Rahmenbedingungen. Das Referenzwerk behandelt neun Hauptbereiche: (1) Motoren: Grundlagen; (2) Motoren: Design; (3) Hybrid- und Elektroantriebe; (4) Getriebe- und Antriebssysteme; (5) Chassis-Systeme; (6) Elektrische und elektronische Systeme; (7) Karosserie-Design; (8) Materialien und Fertigung; (9) Telematik. - Zuverlässige Darstellung einer Vielzahl von Spezialthemen aus dem Bereich der Automobiltechnik. - Zugängliches Nachschlagewerk für Jungingenieure und Studenten, die die technologischen Grundlagen besser verstehen und ihre Kenntnisse erweitern möchten. - Wertvolle Verweise auf Detailinformationen und Forschungsergebnisse aus der technischen Literatur. - Entwickelt in Zusammenarbeit mit der FISITA, der Dachorganisation nationaler Automobil-Ingenieur-Verbände aus 37 Ländern und Vertretung von über 185.000 Ingenieuren aus der Branche. - Erhältlich als stets aktuelle Online-Ressource mit umfassenden Suchfunktionen oder als Print-Ausgabe in sechs Bänden mit über 4.000 Seiten. Ein wichtiges Nachschlagewerk für Bibliotheken und Informationszentren in der Industrie, bei Forschungs- und Schulungseinrichtungen, Fachgesellschaften, Regierungsbehörden und allen Ingenieurstudiengängen. Richtet sich an Fachingenieure und Techniker aus der Industrie, Studenten höherer Semester und Studienabsolventen, Forscher, Dozenten und Ausbilder, Branchenanalysen und Forscher.
Download or read book Reciprocating Machinery Dynamics written by Abdulla S. Rangwala and published by New Age International. This book was released on 2006 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Primarily Written To Meet The Needs Of Practicing Engineers In A Large Variety Of Industries Where Reciprocating Machines Are Used, Although All Of The Material Is Suitable For College Undergraduate Level Design Engineering Courses. It Is Expected That The Reader Is Familiar With Basic To Medium Level Calculus Offered At The College Undergraduate Level.The First Chapter Of The Book Deals With Classical Vibration Theory, Starting With A Single Degree Of Freedom System, To Develop Concepts Of Damping, Response And Unbalance. The Second Chapter Deals With Types And Classification Of Reciprocating Machines, While The Third Chapter Discusses Detail-Design Aspects Of Machine Components. The Fourth Chapter Introduces The Dynamics Of Slider And Cranks Mechanism, And Provides Explanation Of The Purpose And Motion Of Various Components.The Fifth Chapter Looks Into Dynamic Forces Created In The System, And Methods To Balance Gas Pressure And Inertia Loads. The Sixth Chapter Explains The Torsional Vibration Theory And Looks At The Different Variables Associated With It. Chapter Seven Analyzes Flexural Vibrations And Lateral Critical Speed Concepts, Together With Journal Bearings And Their Impact On A Rotating System. Advanced Analytical Techniques To Determine Dynamic Characteristics Of All Major Components Of Reciprocating Machinery Are Presented In Chapter Eight. Methods To Mitigate Torsional Vibrations In A Crankshaft Using Absorbers Are Analyzed In Close Detail. Various Mechanisms Of Flexural Excitation Sources And Their Response On A Rotor-Bearing System Are Explored. Stability Of A Rotor And Different Destabilizing Mechanisms Are Also Included In This Chapter.Techniques In Vibration Measurement And Balancing Of Reciprocating And Rotating Systems Are Presented In Chapter Nine. Chapter Ten Looks At Computational Fluid Dynamics Aspects Of Flow Through Intake And Exhaust Manifolds, As Well As Fluid Flow Induced Component Vibrations. Chapter Eleven Extends This Discussion To Pressure Pulsations In Piping Attached To Reciprocating Pumps And Compressors. Chapter Twelve Considers The Interaction Between The Structural Dynamics Of Components And Noise, Together With Methods To Improve Sound Quality. Optimized Design Of Components Of Reciprocating Machinery For Specified Parameters And Set Target Values Is Investigated At Length In Chapter Thirteen. Practicing Engineers Interested In Applying The Theoretical Model To Their Own Operating System Will Find Case Histories Shown In Chapter FourteenUseful.
Download or read book Automotive Engineering International written by and published by . This book was released on 1998-02 with total page 1204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cumulative Index of The SAE Papers written by Society of Automotive Engineers and published by . This book was released on 1965 with total page 1646 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Engineering written by and published by . This book was released on 1997 with total page 1108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transportation Weekly Government Abstracts written by and published by . This book was released on 1988 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
