Download or read book Dynamic Analysis of Planar Linkages written by J. S. Rai and published by . This book was released on 1977 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Special Planar Linkages written by Jingshan Zhao and published by Springer Science & Business Media. This book was released on 2013-08-31 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Planar linkages play a very important role in mechanical engineering. As the simplest closed chain mechanisms, planar four-bar linkages are widely used in mechanical engineering, civil engineering and aerospace engineering. Design of Special Planar Linkages proposes a uniform design theory for planar four-bar linkages. The merit of the method proposed in this book is that it allows engineers to directly obtain accurate results when there are such solutions for the specified n precise positions; otherwise, the best approximate solutions will be found. This book discusses the kinematics and reachable workspace and singularity of a planar 3-RRR linkage, which can be used to analyze other planar linkages. Then a foldable stair that retains the walking conversions of human beings and all the merits of a concrete stair in civil engineering is described along with a lifting guidance mechanism that has the advantages of high strength, high rigidity, lightweight overconstraint trusses and motion flexibility. The method proposed in this book can be applied to other planar linkages. This book offers a valuable resource for scientists, researchers, engineers, graduate students in mechanical engineering especially those interested in engineering design, robotics and automation. Jingshan Zhao, Associate professor; Zhijing Feng and Fulei Chu, professor; Ning Ma, Dr., all work at the Department of Mechanical Engineering, Tsinghua University.
Download or read book A Dynamic Analysis of Serially Connected Planar Linkages written by Peter V. Kraniauskas and published by . This book was released on 1974 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Analysis of a Planar Four Bar Mechanism type Class 1 Linkage written by Glen Stevenson and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rapid Algorithms for Kinematic and Dynamic Analysis of Planar Rigid Linkages with Revolute Joints written by A. Erdman and published by . This book was released on 1978 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Analysis of Mechanisms written by Michael J. Rider and published by John Wiley & Sons. This book was released on 2015-07-07 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: A planar or two-dimensional (2D) mechanism is the combination of two or more machine elements that are designed to convey a force or motion across parallel planes. For any mechanical engineer, young or old, an understanding of planar mechanism design is fundamental. Mechanical components and complex machines, such as engines or robots, are often designed and conceptualised in 2D before being extended into 3D. Designed to encourage a clear understanding of the nature and design of planar mechanisms, this book favours a frank and straightforward approach to teaching the basics of planar mechanism design and the theory of machines with fully worked examples throughout. Key Features: Provides simple instruction in the design and analysis of planar mechanisms, enabling the student to easily navigate the text and find the desired material Covers topics of fundamental importance to mechanical engineering, from planar mechanism kinematics, 2D linkage analyses and 2D linkage design to the fundamentals of spur gears and cam design Shows numerous example solutions using EES (Engineering Equation Solver) and MATLAB software, with appendices dedicated to explaining the use of both computer tools Follows end-of-chapter problems with clearly detailed solutions
Download or read book Simulation of planar mechanical linkage systems written by Robert Frederick Timm and published by . This book was released on 1967 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Mechanism and Machine Science written by Tadeusz Uhl and published by Springer. This book was released on 2019-06-13 with total page 4248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 15th IFToMM World Congress, which was held in Krakow, Poland, from June 30 to July 4, 2019. Having been organized every four years since 1965, the Congress represents the world’s largest scientific event on mechanism and machine science (MMS). The contributions cover an extremely diverse range of topics, including biomechanical engineering, computational kinematics, design methodologies, dynamics of machinery, multibody dynamics, gearing and transmissions, history of MMS, linkage and mechanical controls, robotics and mechatronics, micro-mechanisms, reliability of machines and mechanisms, rotor dynamics, standardization of terminology, sustainable energy systems, transportation machinery, tribology and vibration. Selected by means of a rigorous international peer-review process, they highlight numerous exciting advances and ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Download or read book Kinematic Synthesis of Linkages written by Richard Scheunemann Hartenberg and published by . This book was released on 1964 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics of Multibody Systems written by Ahmed A. Shabana and published by Cambridge University Press. This book was released on 2003-10-16 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large-scale mechanical systems such as automobiles consist of interconnected rigid and deformable components. These multibody systems present complex problems. This introduction to multibody dynamics emphasises flexible body dynamics. It discusses basic kinematics and dynamics, modeling, and newer computational techniques.
Download or read book Dynamic Analysis of Planar Flexible Mechanisms written by Duygu Çömen and published by . This book was released on 2011 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this study, dynamic behaviors of planar mechanisms with elastic linkages are investigated. For this purpose, slider-crank mechanisms which are widely used in many fields of industry are chosen. Flexible coupler of the mechanism is considered as a pin jointed beam under the effect of elastic oscillations in transverse direction. Euler-Bernoulli beam theory is considered to obtain dynamic responses of the elastic link. Lumped parameters approach is used to model the flexible links. Since, the assumption of small deflections is made, linear and continuous form of the elastic curve equation is written for each lumped masses on the beam to derive the equations of motion of the system. Derived set of nonlinear partial differential equations are reduced to ordinary differential equations by applying finite difference method. Finally, a symbolic mathematical program which gives the dynamic responses of the system is developed to solve the equations of motion. The results obtained from the developed program are tested and verified by the results available in the literature. Elastic deflection results are obtained for different parameters such as mass ratio and length ratio of the links of the mechanisms. The effects of the aforementioned parameters on dynamic response are found and presented in graphical forms.
Download or read book Kinematics and Dynamics of Planar Machinery written by Burton Paul and published by Prentice Hall. This book was released on 1979 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geometric Design of Linkages written by J. Michael McCarthy and published by Springer Science & Business Media. This book was released on 2010-11-11 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the mathematical theory of design for articulated mechanical systems known as linkages. The focus is on sizing mechanical constraints that guide the movement of a work piece, or end-effector, of the system. The function of the device is prescribed as a set of positions to be reachable by the end-effector; and the mechanical constraints are formed by joints that limit relative movement. The goal is to find all the devices that can achieve a specific task. Formulated in this way the design problem is purely geometric in character. Robot manipulators, walking machines, and mechanical hands are examples of articulated mechanical systems that rely on simple mechanical constraints to provide a complex workspace for the end- effector. The principles presented in this book form the foundation for a design theory for these devices. The emphasis, however, is on articulated systems with fewer degrees of freedom than that of the typical robotic system, and therefore, less complexity. This book will be useful to mathematics, engineering and computer science departments teaching courses on mathematical modeling of robotics and other articulated mechanical systems. This new edition includes research results of the past decade on the synthesis of multi loop planar and spherical linkages, and the use of homotopy methods and Clifford algebras in the synthesis of spatial serial chains. One new chapter on the synthesis of spatial serial chains introduces numerical homotopy and the linear product decomposition of polynomial systems. The second new chapter introduces the Clifford algebra formulation of the kinematics equations of serial chain robots. Examples are use throughout to demonstrate the theory.
Download or read book Fundamentals of Machine Theory and Mechanisms written by Antonio Simón Mata and published by Springer. This book was released on 2016-05-27 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops the basic content for an introductory course in Mechanism and Machine Theory. The text is clear and simple, supported by more than 350 figures. More than 60 solved exercises have been included to mark the translation of this book from Spanish into English. Topics treated include: dynamic analysis of machines; introduction to vibratory behavior; rotor and piston balanced; critical speed for shafts; gears and train gears; synthesis for planar mechanisms; and kinematic and dynamic analysis for robots. The chapters in relation to kinematics and dynamics for planar mechanisms can be studied with the help of WinMecc software, which allows the reader to study in an easy and intuitive way, but exhaustive at the same time. This computer program analyzes planar mechanisms of one-degree of freedom and whatever number of links. The program allows users to build a complex mechanism. They can modify any input data in real time changing values in a numeric way or using the computer mouse to manipulate links and vectors while mechanism is moving and showing the results. This powerful tool does not only show the results in a numeric way by means of tables and diagrams but also in a visual way with scalable vectors and curves.
Download or read book Kinematics and Dynamics of Mechanical Systems written by Kevin Russell and published by CRC Press. This book was released on 2016-04-05 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effectively Apply the Systems Needed for Kinematic, Static, and Dynamic Analyses and DesignA survey of machine dynamics using MATLAB and SimMechanics, Kinematics and Dynamics of Mechanical Systems: Implementation in MATLAB and SimMechanics combines the fundamentals of mechanism kinematics, synthesis, statics and dynamics with real-world application
Download or read book Machines Mechanism and Robotics written by D N Badodkar and published by Springer. This book was released on 2018-08-28 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 3rd International and 18th National Conference on Machines and Mechanisms (iNaCoMM), organized by Division of Remote Handling & Robotics, Bhabha Atomic Research Centre, Mumbai, India, from December 13th to 15th, 2017 (iNaCoMM 2017). It reports on various theoretical and practical features of machines, mechanisms and robotics; the contributions include carefully selected, novel ideas on and approaches to design, analysis, prototype development, assessment and surveys. Applications in machine and mechanism engineering, serial and parallel manipulators, power reactor engineering, autonomous vehicles, engineering in medicine, image-based data analytics, compliant mechanisms, and safety mechanisms are covered. Further papers provide in-depth analyses of data preparation, isolation and brain segmentation for focused visualization and robot-based neurosurgery, new approaches to parallel mechanism-based Master-Slave manipulators, solutions to forward kinematic problems, and surveys and optimizations based on historical and contemporary compliant mechanism-based design. The spectrum of contributions on theory and practice reveals central trends and newer branches of research in connection with these topics.
Download or read book Flexible Mechanisms Dynamics and Analysis written by Gary L. Kinzel and published by . This book was released on 1992 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
