Download or read book Durability of Geotextiles written by Rilem and published by CRC Press. This book was released on 2004-03-01 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade, the use of geotextiles has increased significantly in a wide range of civil engineering applications: road construction, coastal engineering, stabilization of slopes and retaining structures, reinforcement of foundations, drainage etc. This work focuses on the factors which determine the level of long-term performance of these materials such as their mechanical and physical properties and physico-chemical ageing processes. (It includes contributions to an international seminar held at Saint-Remy-les-Chevreuse, France, in November 1986)

Download or read book Durability of Geosynthetics written by National Research Council (U.S.). Transportation Research Board and published by Transportation Research Board National Research. This book was released on 1994 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Long term Performance of Geotextile Separators Bucoda Test Site Phase III written by Brian Michael Collins and published by . This book was released on 2005 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotextiles written by Robert Koerner and published by Woodhead Publishing. This book was released on 2016-02-11 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotextiles: From Design to Applications presents valuable information on the high performance fabrics used in soil separation, drainage, filtration, reinforcement, and cushioning. These polymeric materials offer solutions for geoengineering and other civil engineering specialties due to their advanced physical, mechanical, hydraulic, and endurance properties. This important book offers comprehensive coverage of the manufacture, functions, properties, designs, and applications of geotextiles. Part One begins with a chapter on the history of geotextiles, followed by chapters giving detailed reviews of the types of fabrics and their manufacturing processes, from resin type, to fiber extrusion, to textile fabrication. Part Two covers the properties, behavior, and testing of geotextiles, with Part Three focusing on applications dealing with the specific primary functions of geotextiles. In Part Four, chapters offer numerous general applications of geotextiles, including those in waste containment, marine engineering, walls/slopes, agriculture, and erosion control. Finally, the chapters of Part Five address quality control and assurance for geotextiles, and the increasingly important topic of sustainability. - Reviews the types of fabrics used for geotextiles and their manufacturing processes - Covers the properties, behavior, and testing of geotextiles - Contains detailed discussions of the primary functions of geotextiles and their wide range of applications

Download or read book Wellington Sears Handbook of Industrial Textiles written by Sabit Adanur and published by Routledge. This book was released on 2017-11-22 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Wellington Sears Handbook of Industrial Textiles has been a widely used textile industry reference for more than 50 years. Now a completely updated new edition has been published. It was prepared by a team of industrial textile specialists at Auburn University to provide both technical and management personnel with a comprehensive resource on the current technology and applications of today's industrial textiles. All aspects of industrial textiles are covered: man-made and natural materials, manufacturing and finishing methods, and all applications. There are also sections on properties, testing, waste management, computers and automation, and standards and regulations. The appendices provide extensive reference data: properties, specifications, manufacturers and trade names, mathematical equations and measurement units. The text is organized for easy reference, and well illustrated with hundreds of schematics and photographs.

Download or read book Geotextiles in Filtration and Drainage written by International Geotextile Society and published by Thomas Telford. This book was released on 1993 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Some challenging applications of geotextiles in filtration and drainage - Geotextiles in the design of filtration and drainage for highways - The design and specification of geotextiles and geocomposites for filtration and drainage - The hydraulic properties of geosynthetic products - Discussion - Geotextiles in long term use: synopsis of the K & O report - Experimental evaluation of filter performance for teotextiles in landfills - Geotextiel durability: current situation regarding test methods nad standards - Discussion - The way forward: the consulting engineer's veiw - The way forward: a manufacturer's view - the way forward for European harmonisation: assessment of the hydraulic characteristics and properties of geotextiles - The way forward: the client's veiw - Discussion - Chairman's concluding remarks

Download or read book Performance of Geotextile Separators written by Robert D. Holtz and published by . This book was released on 1996 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotextiles Geomembranes and Related Products Steep slopes and walls Embankments on soft soil Roads and railroads Filtration and drainage Erosion control written by G. den Hoedt and published by CRC Press. This book was released on 1990 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1990. Routledge is an imprint of Taylor & Francis, an informa company.

Download or read book Geotextiles written by Amit Rawal and published by CRC Press. This book was released on 2010-10-06 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: The monograph critically reviews most commonly used geotextile structures, their properties and performance characteristics. In general, both natural and synthetic fibres are used for the production of geotextiles, and the advantages and disadvantages of each type of fibre are discussed for various applications of geotextiles. The important functio

Download or read book Geosynthetics Leading the Way to a Resilient Planet written by Giovanni Biondi and published by CRC Press. This book was released on 2023-09-15 with total page 2826 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 12th International Conference on Geosynthetics (12 ICG), held in Roma, Italy, 17-21 September 2023. About 750 Authors - Academics, Researchers, Students, Practitioners, Contractors and Manufacturers – contributed to the peer-reviewed papers of this volume, which includes the Giroud lecture, the Bathurst lecture, the Rowe lecture, four keynote lectures and 296 technical papers. The content of these proceedings illustrates the sustainable use of geosynthetics in a variety of innovative as well as consolidated applications. After the sustainability implications in the correct use of geosynthetics, the ability to overcome the natural events effects, often related to the climate change, and to adequately afford the human activities (as the increase of pollution) forced to refer to a new keyword: Resiliency. The 12 ICG intends to become the base for the next step, hence the conference theme is 'Geosynthetics, Leading the Way to a Resilient Planet'. The conference topics, through general and parallel sessions, invited presentations and keynote lectures, address the most recent developments in geosynthetic engineering, and stimulate fruitful technical and scientific interaction among academicians, professionals, manufacturers, students. The 12 ICG proceedings contain a wealth of information that could be useful for researchers, practitioners and all those working in the broad, innovative and dynamic field of geosynthetics.

Download or read book Geotextiles and Geomembranes Handbook written by T.S. Ingold and published by Elsevier. This book was released on 2013-10-22 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential introductory reference manual for anyone specifying, maintaining or manufacturing geotextiles and geomembranes.

Download or read book Geosynthetic Reinforced Soil GRS Walls written by Jonathan T. H. Wu and published by John Wiley & Sons. This book was released on 2019-07-10 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to provide a detailed overview of Geosynthetic Reinforced Soil Walls Geosynthetic Reinforced Soil (GRS) Walls deploy horizontal layers of closely spaced tensile inclusion in the fill material to achieve stability of a soil mass. GRS walls are more adaptable to different environmental conditions, more economical, and offer high performance in a wide range of transportation infrastructure applications. This book addresses both GRS and GMSE, with a much stronger emphasis on the former. For completeness, it begins with a review of shear strength of soils and classical earth pressure theories. It then goes on to examine the use of geosynthetics as reinforcement, and followed by the load-deformation behavior of GRS mass as a soil-geosynthetic composite, reinforcing mechanisms of GRS, and GRS walls with different types of facing. Finally, the book finishes by covering design concepts with design examples for different loading and geometric conditions, and the construction of GRS walls, including typical construction procedures and general construction guidelines. The number of GRS walls and abutments built to date is relatively low due to lack of understanding of GRS. While failure rate of GMSE has been estimated to be around 5%, failure of GRS has been found to be practically nil, with studies suggesting many advantages, including a smaller susceptibility to long-term creep and stronger resistance to seismic loads when well-compacted granular fill is employed. Geosynthetic Reinforced Soil (GRS) Walls will serve as an excellent guide or reference for wall projects such as transportation infrastructure—including roadways, bridges, retaining walls, and earth slopes—that are in dire need of repair and replacement in the U.S. and abroad. Covers both GRS and GMSE (MSE with geosynthetics as reinforcement); with much greater emphasis on GRS walls Showcases reinforcing mechanisms, engineering behavior, and design concepts of GRS and includes many step-by-step design examples Features information on typical construction procedures and general construction guidelines Includes hundreds of line drawings and photos Geosynthetic Reinforced Soil (GRS) Walls is an important book for practicing geotechnical engineers and structural engineers, as well as for advanced students of civil, structural, and geotechnical engineering.

Download or read book Geotechnical Engineering of Dams written by Robin Fell and published by CRC Press. This book was released on 2005-01-10 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Engineering of Dams provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams. In addition, much attention is paid to the review and assessment of existing dams. The main emphasis of this work is on embankment dams, but much of the text, particularly t

Download or read book Handbook of Technical Textiles written by A. Richard Horrocks and published by Woodhead Publishing. This book was released on 2016-03-09 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Handbook of Technical Textiles has been an essential purchase for professionals and researchers in this area since its publication in 2000. With revised and updated coverage, including several new chapters, this revised two volume second edition reviews recent developments and new technologies across the field of technical textiles. Volume 2 – Technical Textile Applications offers an indispensable guide to established and developing areas in the use of technical textiles. The areas covered include textiles for personal protection and welfare, such as those designed for ballistic protection, personal thermal and fire protection, and medical applications; textiles for industrial, transport and engineering applications, including composite reinforcement and filtration; and the growing area of smart textiles. - Comprehensive handbook for all aspects of technical textiles - Provides updated, detailed coverage of processes, fabric structure, and applications - Ideal resource for those interested in high-performance textiles, textile processes, textile processing, and textile applications - Many of the original, recognized experts from the first edition update their respective chapters

Download or read book Ground Improvement and Reinforced Soil Structures written by C. N. V. Satyanarayana Reddy and published by Springer Nature. This book was released on 2021-07-27 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the select proceedings of the Indian Geotechnical Conference (IGC) 2020. The contents focus on recent developments in geotechnical engineering for sustainable tomorrow. The volume covers the topics related advances in ground improvement of weak foundation soils for various civil engineering projects and design/construction of reinforced soil structures with different fill materials using synthetic and natural reinforcements in different forms.

Download or read book Advanced Dam Engineering for Design Construction and Rehabilitation written by R.B. Jansen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present state of the art of dam engineering has been ronmental, and political factors, which, though important, attained by a continuous search for new ideas and methods are covered in other publications. while incorporating the lessons of the past. In the last 20 The rapid progress in recent times has resulted from the years particularly there have been major innovations, due combined efforts of engineers and associated scientists, as largely to a concerted effort to blend the best of theory and exemplified by the authorities who have contributed to this practice. Accompanying these achievements, there has been book. These individuals have brought extensive knowledge a significant trend toward free interchange among the pro to the task, drawn from experience throughout the world. fessional disciplines, including open discussion of prob With the convergence of such distinguished talent, the op lems and their solutions. The inseparable relationships of portunity for accomplishment was substantial. I gratefully hydrology, geology, and seismology to engineering have acknowledge the generous cooperation of these writers, and been increasingly recognized in this field, where progress am indebted also to other persons and organizations that is founded on interdisciplinary cooperation. have allowed reference to their publications; and I have This book presents advances in dam engineering that attempted to acknowledge this obligation in the sections have been achieved in recent years or are under way. At where the material is used. These courtesies are deeply ap tention is given to practical aspects of design, construction, preciated.

Download or read book Understanding and Improving the Durability of Textiles written by Patricia A Annis and published by Elsevier. This book was released on 2012-09-11 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability of a fabric to resist wear is an essential aspect of its performance. Understanding and improving the durability of textiles provides a comprehensive guide to the factors affecting the durability of a range of different textiles.Part one addresses the different factors that affect textile durability, including the influence of fabric construction and fibre type, as well as properties affecting strength and dimensional stability. Colour fastness and the effects of light are discussed, along with methods for testing and improving wrinkle-resistance and textile durability. Part two goes on to explore the durability of particular types of textile including antimicrobial textiles, protective clothing, historic textiles, silk and geotextiles.With its distinguished editor and international team of expert contributors, Understanding and improving the durability of textiles is an indispensable book for textile scientists, technologists, engineers and those designing, testing and manufacturing textiles. It also provides a comprehensive guide to textile durability for researchers and academics of all levels in this sector. - Provides a comprehensive guide to the factors affecting the durability of a range of different textiles - Discusses colour fastness and the effects of light, and methods for testing and improving wrinkle-resistance and textile durability - Explores the durability of particular types of textile