Download or read book DSR based Test Procedures and Specification Guidelines for Grading PG 58 XX and PG 64S XX Asphalt Binders in Kansas written by Masoud K. Darabi and published by . This book was released on 2020 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report addresses a shortcoming of the Multiple Stress Creep Recovery (MSCR) test method and specification system for virgin PG 58-XX and blends of PG 58-XX with reclaimed asphalt pavement (RAP) binders. The MSCR specification system limits the non-recoverable compliance, Jnr, to less than 4.5 kPa-1 for standard S-graded binders and disregards binders that do not satisfy this criterion. Also, the MSCR specification does not consider virgin binder grade adjustments when RAP is used. These binders, which are often blended with high percentages of RAP, have positively resulted in mostly a 64 °C high-temperature grade according to LTPPBind, with 98% reliability against rutting in Kansas. This research blended PG 58-28 and PG 58-34 virgin binders with four RAP binders and conducted MSCR tests to investigate this issue. Results showed that the high-temperature grade of PG 58-XX binders increased to 64 °C when they were mixed with RAP binder percentages of 15% or more. Furthermore, MSCR test results showed that the addition of RAP binder decreased the Jnr value to the S criteria when the requirement of Jnr difference percentage was omitted. Results also showed that the RAP binder can be screened using the rotational viscosity test to ensure the blends of PG 58-XX and RAP binders result in high-temperature grade adjustments and satisfy the S grade. A comprehensive set of PG 58-XX, PG 64S-XX, and multiple RAP binders used in Kansas should be tested to develop sound specification criteria based on PG and MSCR grading specifications.
Download or read book Performance Graded Asphalt Binder Specification and Testing written by and published by . This book was released on 1994 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Binder Characterization and Evaluation Test methods written by and published by . This book was released on 1994 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Binder Characterization and Evaluation written by David A. Anderson and published by Strategic Highway Research Program (Shrp). This book was released on 1994 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Eco efficient Pavement Construction Materials written by Fernando Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2020-01-18 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-efficient Pavement Construction Materials acquaints engineers with research findings on new eco-efficient pavement materials and how they can be incorporated into future pavements. Divided into three distinctive parts, the book emphasizes current research topics such as pavements with recycled waste, pavements for climate change mitigation, self-healing pavements, and pavements with energy harvesting potential. Part One considers techniques for recycling, Part Two reviews the contribution of pavements for climate change mitigation, including cool pavements, the development of new coatings for high albedo targets, and the design of pervious pavements. Finally, Part Three focuses on self-healing pavements, addressing novel materials and design and performance. Finally, the book discusses the case of pavements with energy harvesting potential, addressing different technologies on this field. Offers a clear and concise lifecycle assessment of asphalt pavement recycling for greenhouse gas emission with temporal aspects Applies key research trends to green the pavement industry Includes techniques for recycling waste materials, the design of cool pavements, self-healing mechanisms, and key steps in energy harvesting
Download or read book Recent Trends in Civil Engineering written by K. K. Pathak and published by Springer Nature. This book was released on 2020-09-27 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected peer-reviewed proceedings of the International Conference on Recent Trends and Innovations in Civil Engineering (ICRTICE 2019). The volume focuses on latest research and advances in the field of civil engineering and materials science such as design and development of new environmental materials, performance testing and verification of smart materials, performance analysis and simulation of steel structures, design and performance optimization of concrete structures, and building materials analysis. The book also covers studies in geotechnical engineering, hydraulic engineering, road and bridge engineering, building services design, engineering management, water resource engineering and renewable energy. The contents of this book will be useful for students, researchers and professionals working in civil engineering.
Download or read book Deep Sea Mining written by Rahul Sharma and published by Springer. This book was released on 2017-03-28 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book contains contributions from specialists who provide a complete status update along with outstanding issues encompassing different topics related to deep-sea mining. Interest in exploration and exploitation of deep-sea minerals is seeing a revival due to diminishing grades and increasing costs of processing of terrestrial minerals as well as availability of several strategic metals in seabed mineral resources; it therefore becomes imperative to take stock of various issues related to deep-sea mining. The authors are experienced scientists and engineers from around the globe developing advanced technologies for mining and metallurgical extraction as well as performing deep sea exploration for several decades. They invite readers to learn about the resource potential of different deep-sea minerals, design considerations and development of mining systems, and the potential environmental impacts of mining in international waters.
Download or read book Superpave Mix Design written by Asphalt Institute and published by . This book was released on 2001-01-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environment Friendly Construction Materials written by Shaopeng Wu and published by MDPI. This book was released on 2019-06-20 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction materials are the most widely used materials for civil infrastructure in our daily lives. However, from an environmental point of view, they consume a huge amount of natural resources and generate the majority of greenhouse gasses. Therefore, many new and novel technologies for designing environmentally friendly construction materials have been developed recently. This Special Issue, “Environment-Friendly Construction Materials”, has been proposed and organized as a means to present recent developments in the field of construction materials. It covers a wide range of selected topics on construction materials.
Download or read book AI and Machine Learning Paradigms for Health Monitoring System written by Hasmat Malik and published by Springer Nature. This book was released on 2021-02-14 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book embodies principles and applications of advanced soft computing approaches in engineering, healthcare and allied domains directed toward the researchers aspiring to learn and apply intelligent data analytics techniques. The first part covers AI, machine learning and data analytics tools and techniques and their applications to the class of several hospital and health real-life problems. In the later part, the applications of AI, ML and data analytics shall be covered over the wide variety of applications in hospital, health, engineering and/or applied sciences such as the clinical services, medical image analysis, management support, quality analysis, bioinformatics, device analysis and operations. The book presents knowledge of experts in the form of chapters with the objective to introduce the theme of intelligent data analytics and discusses associated theoretical applications. At last, it presents simulation codes for the problems included in the book for better understanding for beginners.
Download or read book A Manual for Design of Hot Mix Asphalt with Commentary written by and published by Transportation Research Board. This book was released on 2011 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pavement Engineering written by Rajib B. Mallick and published by CRC Press. This book was released on 2017-10-16 with total page 1013 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pavement Engineering will cover the entire range of pavement construction, from soil preparation to structural design and life-cycle costing and analysis. It will link the concepts of mix and structural design, while also placing emphasis on pavement evaluation and rehabilitation techniques. State-of-the-art content will introduce the latest concepts and techniques, including ground-penetrating radar and seismic testing. This new edition will be fully updated, and add a new chapter on systems approaches to pavement engineering, with an emphasis on sustainability, as well as all new downloadable models and simulations.
Download or read book Geotechnical Instrumentation for Monitoring Field Performance written by John Dunnicliff and published by John Wiley & Sons. This book was released on 1993-10-06 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on the subject written by a practitioner forpractitioners. Geotechnical Instrumentation for Monitoring FieldPerformance Geotechnical Instrumentation for Monitoring FieldPerformance goes far beyond a mere summary of the technicalliterature and manufacturers’ brochures: it guides readersthrough the entire geotechnical instrumentation process, showingthem when to monitor safety and performance, and how to do it well.This comprehensive guide: * Describes the critical steps of planning monitoring programsusing geotechnical instrumentation, including what benefits can beachieved and how construction specifications should bewritten * Describes and evaluates monitoring methods and recommendsinstruments for monitoring groundwater pressure, deformations,total stress in soil, stress change in rock, temperature, and loadand strain in structural members * Offers detailed practical guidelines on instrument calibrations,installation and maintenance, and on the collection, processing,and interpretation of instrumentation data * Describes the role of geotechnical instrumentation during theconstruction and operation phases of civil engineering projects,including braced excavations, embankments on soft ground,embankment dams, excavated and natural slopes, undergroundexcavations, driving piles, and drilled shafts * Provides guidelines throughout the book on the best practices
Download or read book Mechanics of Asphalt Microstructure and Micromechanics written by Linbing Wang and published by McGraw Hill Professional. This book was released on 2010-10-08 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: A State-of-the-Art Guide to the Mechanics of Asphalt Concrete Mechanics of Asphalt systematically covers both the fundamentals and most recent developments in applying rational mechanics, microstructure characterization methods, and numerical tools to understand the behavior of asphalt concrete (AC). The book describes the essential mathematics, mechanics, and numerical techniques required for comprehending advanced modeling and simulation of asphalt materials and asphalt pavements. Filled with detailed illustrations, this authoritative volume provides rational mechanisms to guide the development of best practices in mix design, construction methods, and performance evaluation of asphalt concrete. Mechanics of Asphalt covers: Fundamentals for mathematics and continuum mechanics Mechanical properties of constituents, including binder, aggregates, mastics, and mixtures Microstructure characterization Experimental methods to characterize the heterogeneous strain field Mixture theory and micromechanics applications Fundamentals of phenomenological models Multiscale modeling and moisture damage Models for asphalt concrete, including viscoplasticity, viscoplasticity with damage, disturbed state mechanics model, and fatigue failure criteria Finite element method, boundary element method, and discrete element method Digital specimen and digital test-integration of microstructure and simulation Simulation of asphalt compaction Characterization and modeling of anisotropic properties of asphalt concrete
Download or read book Nanotechnology in Civil Infrastructure written by Kasthurirangan Gopalakrishnan and published by Springer Science & Business Media. This book was released on 2011-03-31 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology in Civil Infrastructure is a state-of-the art reference source describing the latest developments in nano-engineering and nano-modification of construction materials to improve the bulk properties, development of sustainable, intelligent, and smart concrete materials through the integration of nanotechnology based self-sensing and self-powered materials and cyber infrastructure technologies, review of nanotechnology applications in pavement engineering, development of novel, cost-effective, high-performance and long-lasting concrete products and processes through nanotechnology-based innovative processing of cement and cement paste, and advanced nanoscience modeling, visualization, and measurement systems for characterizing and testing civil infrastructure materials at the nano-scale. Researchers, practitioners, undergraduate and graduate students engaged in nanotechnology related research will find this book very useful.
Download or read book The Asphalt Handbook written by Asphalt Institute and published by . This book was released on 2007 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 70 years, "MS-4" has served the asphalt industry as its primary reference manual. This new, expanded edition showcases the advances in asphalt technology, covering such topics as superpave courses, asphalt binder, quality control, and rehabilitation of concrete pavements with HMA.
Download or read book Theory and Technology of Rock Excavation for Civil Engineering written by Dingxiang Zou and published by Springer. This book was released on 2016-11-21 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the technical advances in recent decades and the various theories on rock excavation raised by scholars from different countries, including China and Russia. It not only focuses on rock blasting but also illustrates a number of non-blasting methods, such as mechanical excavation in detail. The book consists of 3 parts: Basic Knowledge, Surface Excavation and Underground Excavation. It presents a variety of technical methods and data from diverse sources in the book, making it a valuable theoretical and practical reference resource for engineers, researchers and postgraduates alike.