Download or read book Drying of Complex Fluid Drops written by David Brutin and published by Royal Society of Chemistry. This book was released on 2022-06-01 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coffee rings, paint drying, blood splatter are all examples of complex fluids drying. Understanding the phenomena of complex fluid drops with respect to drying is important for technology and a lot of research in academia and industry is poured into this topic. This book addresses this industrially important area and provides a thorough grounding to the field. Addressing the fundamental underpinnings of wetting, spreading and drying, the book then takes the reader through key applications grouped into themes, including colloidal droplets (used in printing) and biological (e.g. bloodstain analysis for forensics). With a section on modelling and simulation to balance experiment with computational tools, this book will appeal to anyone working in complex fluids across classical fluid mechanics, soft matter, and chemical, biological and mechanical engineering

Download or read book Drying Dynamics of Drops of Complex Fluids written by Abdulkadir Osman and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Droplet Wetting and Evaporation written by David Brutin and published by Academic Press. This book was released on 2015-05-11 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Droplet Wetting and Evaporation provides engineers, students, and researchers with the first comprehensive guide to the theory and applications of droplet wetting and evaporation. Beginning with a relevant theoretical background, the book moves on to consider specific aspects, including heat transfer, flow instabilities, and the drying of complex fluid droplets. Each chapter covers the principles of the subject, addressing corresponding practical issues and problems. The text is ideal for a broad range of domains, from aerospace and materials, to biomedical applications, comprehensively relaying the challenges and approaches from the different communities leading the way in droplet research and development. Provides a broad, cross-subject coverage of theory and application that is ideal for engineers, students and researchers who need to follow all major developments in this interdisciplinary field Includes comprehensive discussions of heat transfer, flow instabilities, and the drying of complex fluid droplets Begins with an accessible summary of fundamental theory before moving on to specific areas such as heat transfer, flow instabilities, and the drying of complex fluid droplets

Download or read book Physical Science Under Microgravity Experiments on Board the SJ 10 Recoverable Satellite written by Wenrui Hu and published by Springer Nature. This book was released on 2019-10-16 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the physical science experiments in a space microgravity environment conducted on board the SJ-10 recoverable satellite, which was launched on April 6th, 2016 and recovered on April 18th, 2016. The experiments described were selected from ~100 proposals from various institutions in China and around the world, and have never previously been conducted in the respective fields. They involve fluid physics and materials science, and primarily investigate the kinetic properties of matter in a space microgravity environment. The book provides a comprehensive review of these experiments, as well as the mission’s execution, data collection, and scientific outcomes.

Download or read book Wet Granular Matter A Truly Complex Fluid Second Edition written by Stephan Herminghaus and published by World Scientific. This book was released on 2023-09-27 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a monograph written for the young and advanced researcher who is entering the field of wet granular matter, keen to understand the basic physical principles governing this state of soft matter. It treats wet granulates as a ternary system consisting of the grains, a primary, and a secondary fluid. After generally addressing wetting phenomena and outlining the basic facts on dry granular systems, a chapter on basic mechanisms and their effects is dedicated to every region of the ternary phase diagram. Effects of grain shape and roughness are considered as well. Rather than addressing engineering aspects like existing books on this topic do, this book aims to provide a generalized framework suitable for those who want to understand these systems on a more fundamental basis. It spans a wide scope of questions, ranging from possible general principles behind the emergence of structure and pattern, to the interpretation of geological outcrop features we encounter in nature.

Download or read book Pattern Recognition and Machine Intelligence written by Bhabesh Deka and published by Springer Nature. This book was released on 2019-11-25 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set of LNCS 11941 and 11942 constitutes the refereed proceedings of the 8th International Conference on Pattern Recognition and Machine Intelligence, PReMI 2019, held in Tezpur, India, in December 2019. The 131 revised full papers presented were carefully reviewed and selected from 341 submissions. They are organized in topical sections named: Pattern Recognition; Machine Learning; Deep Learning; Soft and Evolutionary Computing; Image Processing; Medical Image Processing; Bioinformatics and Biomedical Signal Processing; Information Retrieval; Remote Sensing; Signal and Video Processing; and Smart and Intelligent Sensors.

Download or read book Desiccation Cracks and their Patterns written by Lucas Goehring and published by John Wiley & Sons. This book was released on 2015-06-08 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together basic ideas, classical theories, recent experimental and theoretical aspects, this book explains desiccation cracks from simple, easily-comprehensible cases to more complex, applied situations. The ideal team of authors, combining experimental and theoretical backgrounds, and with experience in both physical and earth sciences, discuss how the study of cracks can lead to the design of crack-resistant materials, as well as how cracks can be grown to generate patterned surfaces at the nano- and micro-scales. Important research and recent developments on tailoring desiccation cracks by different methods are covered, supported by straightforward, yet deep theoretical models. Intended for a broad readership spanning physics, materials science, and engineering to the geosciences, the book also includes additional reading especially for students engaged in pattern formation research.

Download or read book Drying of Complex Fluids Near the Contact Line written by Ching Hsueh and published by . This book was released on 2012 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: We study the pattern formation induced by drying colloidal suspensions and polymer solutions in a vertical Hele-Shaw cell immersed in a reservoir (dip-coating like set-up). The contact line speed is controlled by pumping the solution from the reservoir. At low capillary number stick-slip motion of the receding contact line is observed for silica suspensions. Periodic strips spontaneously form during drying. We study the wavelength and deposit morphology as a function of the mean receding velocity. The pinning force variation is deduced from the contact line displacement. The effect of the solution pH and size of the particles on the deposit morphology, wavelength, and pinning force is analyzed. Results are compared to some models of the literature. In the same conditions dried polymer films are almost flat, but stick-slip motion is found at higher temperature. In the second part of this manuscript, a 2D model has been developed to describe the flow inside the Hele-Shaw cell induced by the imposed velocity and non-uniform evaporation flux. The model is governed by Stokes equation and Fick's law. A small truncation at the meniscus tip is applied in order to avoid the singularity due to the divergence of the evaporation flux. Lubrication approximation as well as global mass balances are used to express the boundary conditions. Deposit thickness and the flow properties are studied as a function of the process parameters (imposed velocity, evaporation rate, and solute concentration) and the system properties (kinetic viscosity, diffusion coefficient). Finally, we compare our simulation results with a simple model. This model is a first step to study mass transfer in a meniscus.

Download or read book Wetting and Evaporation Droplets of Pure and Complex Fluids written by and published by . This book was released on 2013 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tip Streaming of Simple and Complex Fluids written by José María Montanero and published by Springer Nature. This book was released on with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Drying Of Loose And Particulate Materials written by R. B. Keey and published by CRC Press. This book was released on 1991-09-01 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work furnishes students and practising engineers with a guide to the principles of industrial drying of particulate and loose solids and with advice on improved design procedures. The book focuses on those processes considered by the author to be the most effective in the current field.

Download or read book Droplet and Spray Transport Paradigms and Applications written by Saptarshi Basu and published by Springer. This book was released on 2017-12-12 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on droplets and sprays and their applications. It discusses how droplet level transport is central to a multitude of applications and how droplet level manipulation and control can enhance the efficiency and design of multiphase systems. Droplets and sprays are ubiquitous in a variety of multiphase and multiscale applications in surface patterning, oil recovery, combustion, atomization, spray drying, thermal barrier coating, renewable energy, and electronic cooling, to name but a few. This book provides two levels of details pertaining to such applications. Each chapter delves into a specific application and provides not only an overview but also detailed physical insights into the application mechanism from the point of view of droplets and sprays. All chapters provide a mix of cutting-edge applications, new diagnostic techniques and modern computational methodologies, as well as the fundamental physical mechanism involved in each application. Taken together, the chapters provide a translational perspective on these applications, from basic transport processes to optimization, and from design to implementation using droplets or sprays as fundamental building blocks. Given its breadth of coverage, the book will be of interest to students, researchers, and industry professionals alike.

Download or read book Influence of the Development of Drop Morphology on Drying Rates and Loss Rates of Volatile Components During Drying written by John Phillip Hecht and published by . This book was released on 1999 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biomedical Data Mining for Information Retrieval written by Sujata Dash and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: BIOMEDICAL DATA MINING FOR INFORMATION RETRIEVAL This book not only emphasizes traditional computational techniques, but discusses data mining, biomedical image processing, information retrieval with broad coverage of basic scientific applications. Biomedical Data Mining for Information Retrieval comprehensively covers the topic of mining biomedical text, images and visual features towards information retrieval. Biomedical and health informatics is an emerging field of research at the intersection of information science, computer science, and healthcare and brings tremendous opportunities and challenges due to easily available and abundant biomedical data for further analysis. The aim of healthcare informatics is to ensure the high-quality, efficient healthcare, better treatment and quality of life by analyzing biomedical and healthcare data including patient’s data, electronic health records (EHRs) and lifestyle. Previously, it was a common requirement to have a domain expert to develop a model for biomedical or healthcare; however, recent advancements in representation learning algorithms allows us to automatically to develop the model. Biomedical image mining, a novel research area, due to the vast amount of available biomedical images, increasingly generates and stores digitally. These images are mainly in the form of computed tomography (CT), X-ray, nuclear medicine imaging (PET, SPECT), magnetic resonance imaging (MRI) and ultrasound. Patients’ biomedical images can be digitized using data mining techniques and may help in answering several important and critical questions relating to healthcare. Image mining in medicine can help to uncover new relationships between data and reveal new useful information that can be helpful for doctors in treating their patients. Audience Researchers in various fields including computer science, medical informatics, healthcare IOT, artificial intelligence, machine learning, image processing, clinical big data analytics.

Download or read book Controlled Impingement of Drying Drops on Solid Surfaces written by Anil Thadani and published by . This book was released on 1970 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Drying of Liquid solid Slurry Droplets written by N. Abuaf and published by . This book was released on 1985 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Drying Rates of Drops written by Chi-Yuan Ling and published by . This book was released on 1962 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: