Download or read book Droplet Separation written by Armin Bürkholz and published by Wiley-VCH. This book was released on 1989 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: International in coverage, the book offers industrial engineers a new and practical approach to solving problems in droplet separation. Without going into needless detail, it addresses such problems as the cost of droplet separation, the physical effects involved, separation efficiencies expected, and the lessons to be learned from industrial practice. Numerous diagrams, uncomplicated and reliable formulas, and lucid examples are presented to help design and calculate droplet separators. An exhaustive survey, based on twenty years of experience, the book is unparalleled in its field. Special feature: the introduction of a new dimensionless number.
Download or read book Droplet Separation written by Armin Bürkholz and published by . This book was released on 1989 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedic Handbook of Emulsion Technology written by Johan Sjoblom and published by CRC Press. This book was released on 2001-03-16 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: A discussion of fundamental characteristics, theories and applications for liquid-liquid colloidal dispersions. It profiles experimental and traditional measurement techniques in a variety of emulsified systems, including rheology, nuclear magnetic resonance, dielectric spectroscopy, microcalorimetry, video enhanced microscopy, and conductivity.
Download or read book Recent Developments in Separation Science written by Po Li. N N and published by CRC Press. This book was released on 2018-05-04 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 of the book discusses such topics as absorption, chromatography, crystallization, microcapsules, adsubble methods, chemical complexing, parametric pumping, molecular sieve adsorption, enzyme membrane systems, immobilized solvent membranes and liquid surfactant membranes.
Download or read book Technologies for Smart Sensors and Sensor Fusion written by Kevin Yallup and published by CRC Press. This book was released on 2017-12-19 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exciting new developments are enabling sensors to go beyond the realm of simple sensing of movement or capture of images to deliver information such as location in a built environment, the sense of touch, and the presence of chemicals. These sensors unlock the potential for smarter systems, allowing machines to interact with the world around them in more intelligent and sophisticated ways. Featuring contributions from authors working at the leading edge of sensor technology, Technologies for Smart Sensors and Sensor Fusion showcases the latest advancements in sensors with biotechnology, medical science, chemical detection, environmental monitoring, automotive, and industrial applications. This valuable reference describes the increasingly varied number of sensors that can be integrated into arrays, and examines the growing availability and computational power of communication devices that support the algorithms needed to reduce the raw sensor data from multiple sensors and convert it into the information needed by the sensor array to enable rapid transmission of the results to the required point. Using both SI and US units, the text: Provides a fundamental and analytical understanding of the underlying technology for smart sensors Discusses groundbreaking software and sensor systems as well as key issues surrounding sensor fusion Exemplifies the richness and diversity of development work in the world of smart sensors and sensor fusion Offering fresh insight into the sensors of the future, Technologies for Smart Sensors and Sensor Fusion not only exposes readers to trends but also inspires innovation in smart sensor and sensor system development.
Download or read book Micro Total Analysis Systems 2004 written by Thomas Laurell and published by Royal Society of Chemistry. This book was released on 2004 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ice Adhesion written by Chang-Hwan Choi and published by John Wiley & Sons. This book was released on 2020-11-13 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book presents ways to mitigate the disastrous effects of snow/ice accumulation and discusses the mechanisms of new coatings deicing technologies. The strategies currently used to combat ice accumulation problems involve chemical, mechanical or electrical approaches. These are expensive and labor intensive, and the use of chemicals raises serious environmental concerns. The availability of truly icephobic surfaces or coatings will be a big boon in preventing the devastating effects of ice accumulation. Currently, there is tremendous interest in harnessing nanotechnology in rendering surfaces icephobic or in devising icephobic surface materials and coatings, and all signals indicate that such interest will continue unabated in the future. As the key issue regarding icephobic materials or coatings is their durability, much effort is being spent in developing surface materials or coatings which can be effective over a long period. With the tremendous activity in this arena, there is strong hope that in the not too distant future, durable surface materials or coatings will come to fruition. This book contains 20 chapters by subject matter experts and is divided into three parts— Part 1: Fundamentals of Ice Formation and Characterization; Part 2: Ice Adhesion and Its Measurement; and Part 3: Methods to Mitigate Ice Adhesion. The topics covered include: factors influencing the formation, adhesion and friction of ice; ice nucleation on solid surfaces; physics of ice nucleation and growth on a surface; condensation frosting; defrosting properties of structured surfaces; relationship between surface free energy and ice adhesion to surfaces; metrology of ice adhesion; test methods for quantifying ice adhesion strength to surfaces; interlaboratory studies of ice adhesion strength; mechanisms of surface icing and deicing technologies; icephobicities of superhydrophobic surfaces; anti-icing using microstructured surfaces; icephobic surfaces: features and challenges; bio-inspired anti-icing surface materials; durability of anti-icing coatings; durability of icephobic coatings; bio-inspired icephobic coatings; protection from ice accretion on aircraft; and numerical modeling and its application to inflight icing.
Download or read book Manual on Requirements Handling and Quality Control of Gas Turbinefuel written by H. VonE. Doering and published by ASTM International. This book was released on 1973 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Food Lipids written by Casimir C. Akoh and published by CRC Press. This book was released on 2002-04-17 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlighting the role of dietary fats in foods, human health, and disease, this book offers comprehensive presentations of lipids in food. Furnishing a solid background in lipid nomenclature and classification, it contains over 3600 bibliographic citations for more in-depth exploration of specific topics and over 530 illustrations, tables, and equa
Download or read book Recent Advances In Spray Combustion written by Kenneth K. Kuo and published by AIAA. This book was released on 1996 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Droplet and Digital Microfluidics written by Sanket Goel and published by Elsevier. This book was released on 2024-03-11 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Droplet and Digital Microfluidics: Ideation to Implementation is a detailed introduction to the dynamics of droplet and digital microfluidics, also featuring coverage of new methods and applications. The explosion of applications of microelectromechanical systems (MEMS) in recent years has driven demand for expertise and innovation in fluid flow in the microchannels they contain. In this book, detailed descriptions of methods for biological and chemical applications of microfluidics are provided, along with supporting foundational knowledge. In addition, the principles of droplet and digital microfluidics are explained, along with their different applications and governing physics. New additions to the technological knowledgebase that enable advances in droplet and digital microfluidics include machine learning and exciting future avenues for research. Provides step-by-step fabrication, testing, and characterization instructions in each chapter to support implementation Includes explanations of applications and methods in biological and chemical settings Describes the path to automation of digital and droplet microfluidic platforms
Download or read book Microfluidics and Nanotechnology written by Eric Lagally and published by CRC Press. This book was released on 2017-12-19 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: An increasing number of technologies are being used to detect minute quantities of biomolecules and cells. However, it can be difficult to determine which technologies show the most promise for high-sensitivity and low-limit detection in different applications. Microfluidics and Nanotechnology: Biosensing to the Single Molecule Limit details proven approaches for the detection of single cells and even single molecules—approaches employed by the world’s foremost microfluidics and nanotechnology laboratories. While similar books concentrate only on microfluidics or nanotechnology, this book focuses on the combination of soft materials (elastomers and other polymers) with hard materials (semiconductors, metals, and glass) to form integrated detection systems for biological and chemical targets. It explores physical and chemical—as well as contact and noncontact—detection methods, using case studies to demonstrate system capabilities. Presenting a snapshot of the current state of the art, the text: Explains the theory behind different detection techniques, from mechanical resonators for detecting cell density to fiber-optic methods for detecting DNA hybridization, and beyond Examines microfluidic advances, including droplet microfluidics, digital microfluidics for manipulating droplets on the microscale, and more Highlights an array of technologies to allow for a comparison of the fundamental advantages and challenges of each, as well as an appreciation of the power of leveraging scalability and integration to achieve sensitivity at low cost Microfluidics and Nanotechnology: Biosensing to the Single Molecule Limit not only serves as a quick reference for the latest achievements in biochemical detection at the single-cell and single-molecule levels, but also provides researchers with inspiration for further innovation and expansion of the field.
Download or read book Nanopatterning and Nanoscale Devices for Biological Applications written by Seila Šelimović and published by CRC Press. This book was released on 2017-12-19 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale techniques and devices have had an explosive influence on research in life sciences and bioengineering. Reflecting this influence, Nanopatterning and Nanoscale Devices for Biological Applications provides valuable insight into the latest developments in nanoscale technologies for the study of biological systems. Written and edited by experts in the field, this first-of-its-kind collection of topics: Covers device fabrication methods targeting the substrate on the nanoscale through surface modification Explores the generation of nanostructured biointerfaces and bioelectronics elements Examines microfluidically generated droplets as reactors enabling nanoscale sample preparation and analysis Gives an overview of key biosensors and integrated devices with nanoscale functionalities Discusses the biological applications of nanoscale devices, including a review of nanotechnology in tissue engineering Readers gain a deep understanding of the cutting-edge applications of nanotechnologies in biological engineering, and learn how to apply the relevant scientific concepts to their own research. Nanopatterning and Nanoscale Devices for Biological Applications is the definitive reference for researchers in engineering, biology, and biomedicine, and for anyone exploring the newest trends in this innovative field.
Download or read book Handbook of Sulphuric Acid Manufacturing written by Douglas K. Louie and published by DKL Engineering, Inc.. This book was released on 2005 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mems for Biomedical Applications written by Shekhar Bhansali and published by Elsevier. This book was released on 2012-07-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of Micro Electro Mechanical Systems (MEMS) in the biomedical field is leading to a new generation of medical devices. MEMS for biomedical applications reviews the wealth of recent research on fabrication technologies and applications of this exciting technology.The book is divided into four parts: Part one introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms. Part two describes applications of MEMS for biomedical sensing and diagnostic applications. MEMS for in vivo sensing and electrical impedance spectroscopy are investigated, along with ultrasonic transducers, and lab-on-chip devices. MEMS for tissue engineering and clinical applications are the focus of part three, which considers cell culture and tissue scaffolding devices, BioMEMS for drug delivery and minimally invasive medical procedures. Finally, part four reviews emerging biomedical applications of MEMS, from implantable neuroprobes and ocular implants to cellular microinjection and hybrid MEMS.With its distinguished editors and international team of expert contributors, MEMS for biomedical applications provides an authoritative review for scientists and manufacturers involved in the design and development of medical devices as well as clinicians using this important technology. Reviews the wealth of recent research on fabrication technologies and applications of Micro Electro Mechanical Systems (MEMS) in the biomedical field Introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms Considers MEMS for biomedical sensing and diagnostic applications, along with MEMS for in vivo sensing and electrical impedance spectroscopy
Download or read book Droplet Microfluidics written by Eric Brouzes and published by MDPI. This book was released on 2021-05-06 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Droplet microfluidics has dramatically developed in the past decade and has been established as a microfluidic technology that can translate into commercial products. Its rapid development and adoption have relied not only on an efficient stabilizing system (oil and surfactant), but also on a library of modules that can manipulate droplets at a high-throughput. Droplet microfluidics is a vibrant field that keeps evolving, with advances that span technology development and applications. Recent examples include innovative methods to generate droplets, to perform single-cell encapsulation, magnetic extraction, or sorting at an even higher throughput. The trend consists of improving parameters such as robustness, throughput, or ease of use. These developments rely on a firm understanding of the physics and chemistry involved in hydrodynamic flow at a small scale. Finally, droplet microfluidics has played a pivotal role in biological applications, such as single-cell genomics or high-throughput microbial screening, and chemical applications. This Special Issue will showcase all aspects of the exciting field of droplet microfluidics, including, but not limited to, technology development, applications, and open-source systems.
Download or read book European Symposium on Computer Aided Process Engineering 10 written by S. Pierucci and published by Elsevier. This book was released on 2000-05-10 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes papers presented at ESCAPE-10, the 10th European Symposium on Computer Aided Process -Engineering, held in Florence, Italy, 7-10th May, 2000. The scientific program reflected two complementary strategic objectives of the 'Computer Aided Process Engineering' (CAPE) Working Party: one checked the status of historically consolidated topics by means of their industrial application and their emerging issues, while the other was addressed to opening new windows to the CAPE audience by inviting adjacent Working Parties to co-operate in the creation of the technical program. The former CAPE strategic objective was covered by the topics: Numerical Methods, Process Design and Synthesis, Dynamics & Control, Process Modeling, Simulation and Optimization. The latter CAPE strategic objective derived from the European Federation of Chemical Engineering (EFCE) promotion of scientific activities which autonomously and transversely work across the Working Parties' terms of references. These activities enhance the exchange of the know-how and knowledge acquired by different Working Parties in homologous fields. They also aim to discover complementary facets useful to the dissemination of tools and of novel procedures. As a consequence, the Working Parties 'Environmental Protection', 'Loss Prevention and Safety Promotion' and 'Multiphase Fluid Flow' were invited to assist in the organization of sessions in the area of: A Process Integrated Approach for: Environmental Benefit, Loss Prevention and Safety, Computational Fluid Dynamics. A total of 473 abstracts from all over the world were evaluated by the International Scientific Committee. Out of them 197 have been finally selected for the presentation and reported into this book. Their authors come from thirty different countries. The selection of the papers was carried out by twenty-eight international reviewers. These proceedings will be a major reference document to the scientific and industrial community and will contribute to the progress in Computer Aided Process Engineering.
