Download or read book Droplet Microfluidics written by Abraham Lee and published by Royal Society of Chemistry. This book was released on 2020-11-27 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by two leaders, this book has drawn together expertise from around the globe to form a unified, cohesive resource for the droplet microfluidics community. Starting with the basic theory of droplet microfluidics before introducing its use as a tool, the reader is treated to chapters on important techniques, including robust passive and active droplet manipulations and applications such as single cell analysis, which is key for drug discovery. This book is a go-to resource for the community yearning to adopt and promote droplet microfluidics into different applications.

Download or read book Theoretical Microfluidics written by Henrik Bruus and published by Oxford University Press. This book was released on 2007-09-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics is a young and rapidly expanding scientific discipline, which deals with fluids and solutions in miniaturized systems, the so-called lab-on-a-chip systems. It has applications in chemical engineering, pharmaceutics, biotechnology and medicine. As the lab-on-a-chip systems grow in complexity, a proper theoretical understanding becomes increasingly important. The basic idea of the book is to provide a self-contained formulation of the theoretical framework of microfluidics, and at the same time give physical motivation and examples from lab-on-a-chip technology. After three chapters introducing microfluidics, the governing equations for mass, momentum and energy, and some basic flow solutions, the following 14 chapters treat hydraulic resistance/compliance, diffusion/dispersion, time-dependent flow, capillarity, electro- and magneto-hydrodynamics, thermal transport, two-phase flow, complex flow patterns and acousto-fluidics, as well as the new fields of opto- and nano-fluidics. Throughout the book simple models with analytical solutions are presented to provide the student with a thorough physical understanding of order of magnitudes and various selected microfluidic phenomena and devices. The book grew out of a set of well-tested lecture notes. It is with its many pedagogical exercises designed as a textbook for an advanced undergraduate or first-year graduate course. It is also well suited for self-study.

Download or read book Microfluidics for Biotechnology written by Jean Berthier and published by Artech House. This book was released on 2010 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of microfluidics to biotechnology is an exciting new area that has already begun to revolutionize how researchers study and manipulate macromolecules like DNA, proteins and cells in vitro and within living organisms. Now in a newly revised and expanded second edition, the Artech House bestseller, Microfluidics for Biotechnology brings you to the cutting edge of this burgeoning field. Among the numerous updates, the second edition features three entirely new chapters on: non-dimensional numbers in microfluidics; interface, capillarity and microdrops; and digital, two-phase and droplet microfluidics.Presenting an enlightening balance of numerical approaches, theory, and experimental examples, this book provides a detailed look at the mechanical behavior of the different types of micro/nano particles and macromolecules that are used in biotechnology. You gain a solid understanding of microfluidics theory and the mechanics of microflows and microdrops. The book examines the diffusion of species and nanoparticles, including continuous flow and discrete Monte-Carlo methods.This unique volume describes the transport and dispersion of biochemical species and particles. You learn how to model biochemical reactions, including DNA hybridization and enzymatic reactions. Moreover, the book helps you master the theory, applications, and modeling of magnetic beads behavior and provides an overview of self-assembly and magnetic composite. Other key topics include the electric manipulation of micro/nanoparticles and macromolecules and the experimental aspects of biological macromolecule manipulation.

Download or read book Hydraulic Power System Analysis written by Arthur Akers and published by CRC Press. This book was released on 2006-04-17 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The excitement and the glitz of mechatronics has shifted the engineering community's attention away from fluid power systems in recent years. However, fluid power still remains advantageous in many applications compared to electrical or mechanical power transmission methods. Designers are left with few practical resources to help in the design and

Download or read book Introduction to Microfluidics written by Patrick Tabeling and published by . This book was released on 2010-05-06 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics deals with fluids flowing in miniaturized systems, and has practical applications in the pharmaceutical, biomedical and chemical engineering fields. This text provides an introduction to this emerging discipline.

Download or read book The MEMS Handbook written by Mohamed Gad-el-Hak and published by CRC Press. This book was released on 2001-09-27 with total page 1386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revolution is well underway. Our understanding and utilization of microelectromechanical systems (MEMS) are growing at an explosive rate with a worldwide market approaching billions of dollars. In time, microdevices will fill the niches of our lives as pervasively as electronics do right now. But if these miniature devices are to fulfill their mammoth potential, today's engineers need a thorough grounding in the underlying physics, modeling techniques, fabrication methods, and materials of MEMS. The MEMS Handbook delivers all of this and more. Its team of authors-unsurpassed in their experience and standing in the scientific community- explore various aspects of MEMS: their design, fabrication, and applications as well as the physical modeling of their operations. Designed for maximum readability without compromising rigor, it provides a current and essential overview of this fledgling discipline.

Download or read book Micro and Nanoscale Fluid Mechanics written by Brian J. Kirby and published by Cambridge University Press. This book was released on 2010-07-26 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text focuses on the physics of fluid transport in micro- and nanofabricated liquid-phase systems, with consideration of gas bubbles, solid particles, and macromolecules. This text was designed with the goal of bringing together several areas that are often taught separately - namely, fluid mechanics, electrodynamics, and interfacial chemistry and electrochemistry - with a focused goal of preparing the modern microfluidics researcher to analyse and model continuum fluid mechanical systems encountered when working with micro- and nanofabricated devices. This text serves as a useful reference for practising researchers but is designed primarily for classroom instruction. Worked sample problems are included throughout to assist the student, and exercises at the end of each chapter help facilitate class learning.

Download or read book Microfluidics written by Yu Song and published by John Wiley & Sons. This book was released on 2018-05-07 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book offering a global overview of fundamental microfluidics and the wide range of possible applications, for example, in chemistry, biology, and biomedical science. As such, it summarizes recent progress in microfluidics, including its origin and development, the theoretical fundamentals, and fabrication techniques for microfluidic devices. The book also comprehensively covers the fluid mechanics, physics and chemistry as well as applications in such different fields as detection and synthesis of inorganic and organic materials. A useful reference for non-specialists and a basic guideline for research scientists and technicians already active in this field or intending to work in microfluidics.

Download or read book Microfluidics History Theory and Applications written by William B. J. Zimmerman and published by Springer Science & Business Media. This book was released on 2006-06-27 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics is a microtechnological field dealing with the precise transport of fluids (liquids or gases) in small amounts (e.g. microliters, nanoliters or even picoliters). This book provides a useful introduction into this burgeoning field, and a specific application of microfluidics is presented. It also gives a survey of microfluidics.

Download or read book Transport Phenomena in Microfluidic Systems written by Pradipta Kumar Panigrahi and published by John Wiley & Sons. This book was released on 2016-02-15 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully comprehensive introduction to the rapidly emerging area of micro systems technology Transport Phenomena in Micro Systems explores the fundamentals of the new technologies related to Micro-Electro-Mechanical Systems (MEMS). It deals with the behavior, precise control and manipulation of fluids that are geometrically constrained to a small, typically sub-millimeter, scale, such as nl, pl, fl, small size, low energy consumption, effects of the micro domain and heat transfer in the related devices. The author describes in detail and with extensive illustration micro fabrication, channel flow, transport laws, magnetophoresis, micro scale convection and micro sensors and activators, among others. This book spans multidisciplinary fields such as material science and mechanical engineering, engineering, physics, chemistry, microtechnology and biotechnology. Brings together in one collection recent and emerging developments in this fast-growing area of micro systems Covers multidisciplinary fields such as materials science, mechanical engineering, microtechnology and biotechnology, et al Comprehensive coverage of analytical models in microfluidics and MEMS technology Introduces micro fluidics applications include the development of inkjet printheads, micro-propulsion, and micro thermal technologies Presented in a very logical format Supplies readers with problems and solutions

Download or read book Microscale Acoustofluidics written by Thomas Laurell and published by Royal Society of Chemistry. This book was released on 2014-12-08 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manipulation of cells and microparticles within microfluidic systems using external forces is valuable for many microscale analytical and bioanalytical applications. Acoustofluidics is the ultrasound-based external forcing of microparticles with microfluidic systems. It has gained much interest because it allows for the simple label-free separation of microparticles based on their mechanical properties without affecting the microparticles themselves. Microscale Acoustofluidics provides an introduction to the field providing the background to the fundamental physics including chapters on governing equations in microfluidics and perturbation theory and ultrasound resonances, acoustic radiation force on small particles, continuum mechanics for ultrasonic particle manipulation, and piezoelectricity and application to the excitation of acoustic fields for ultrasonic particle manipulation. The book also provides information on the design and characterization of ultrasonic particle manipulation devices as well as applications in acoustic trapping and immunoassays. Written by leading experts in the field, the book will appeal to postgraduate students and researchers interested in microfluidics and lab-on-a-chip applications.

Download or read book Qualitative Simulation Modeling and Analysis written by Paul A. Fishwick and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently there has been considerable interest in qualitative methods in simulation and mathematical model- ing. Qualitative Simulation Modeling and Analysis is the first book to thoroughly review fundamental concepts in the field of qualitative simulation. The book will appeal to readers in a variety of disciplines including researchers in simulation methodology, artificial intelligence and engineering. This book boldly attempts to bring together, for the first time, the qualitative techniques previously found only in hard-to-find journals dedicated to single disciplines. The book is written for scientists and engineers interested in improving their knowledge of simulation modeling. The "qualitative" nature of the book stresses concepts of invariance, uncertainty and graph-theoretic bases for modeling and analysis.

Download or read book Reservoir Formation Damage written by Faruk Civan and published by Elsevier. This book was released on 2011-08-30 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir Formation Damage, Second edition is a comprehensive treatise of the theory and modeling of common formation damage problems and is an important guide for research and development, laboratory testing for diagnosis and effective treatment, and tailor-fit- design of optimal strategies for mitigation of reservoir formation damage. The new edition includes field case histories and simulated scenarios demonstrating the consequences of formation damage in petroleum reservoirsFaruk Civan, Ph.D., is an Alumni Chair Professor in the Mewbourne School of Petroleum and Geological Engineering at the University of Oklahoma in Norman. Dr. Civan has received numerous honors and awards, including five distinguished lectureship awards and the 2003 SPE Distinguished Achievement Award for Petroleum Engineering Faculty. - Petroleum engineers and managers get critical material on evaluation, prevention, and remediation of formation damage which can save or cost millions in profits from a mechanistic point of view - State-of-the-Art knowledge and valuable insights into the nature of processes and operational practices causing formation damage - Provides new strategies designed to minimize the impact of and avoid formation damage in petroleum reservoirs with the newest drilling, monitoring, and detection techniques

Download or read book Chemical Engineering Fluid Mechanics written by Ron Darby and published by CRC Press. This book was released on 2016-11-30 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the most current, accurate, and practical fluid mechanics related applications that the practicing BS level engineer needs today in the chemical and related industries, in addition to a fundamental understanding of these applications based upon sound fundamental basic scientific principles. The emphasis remains on problem solving, and the new edition includes many more examples.

Download or read book Microfluidics and Nanofluidics written by Mohsen Sheikholeslami Kandelousi and published by BoD – Books on Demand. This book was released on 2018-08-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the present book, various applications of microfluidics and nanofluidics are introduced. Microfluidics and nanofluidics span a broad array of disciplines including mechanical, materials, and electrical engineering, surface science, chemistry, physics and biology. Also, this book deals with transport and interactions of colloidal particles and biomolecules in microchannels, which have great importance to many microfluidic applications, such as drug delivery in life science, microchannel heat exchangers in electronic cooling, and food processing industry. Furthermore, this book focuses on a detailed description of the thermal transport behavior, challenges and implications that involve the development and use of HTFs under the influence of atomistic-scale structures and industrial applications.

Download or read book Nanotechnology for Microfluidics written by Xingyu Jiang and published by John Wiley & Sons. This book was released on 2020-09-08 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on microfluidics with applications in nanotechnology. The first part summarizes the recent advances and achievements in the field of microfluidic technology, with emphasize on the the influence of nanotechnology. The second part introduces various applications of microfluidics in nanotechnology, such as drug delivery, tissue engineering and biomedical diagnosis.

Download or read book Flow Injection Analysis written by Jaromir Ruzicka and published by John Wiley & Sons. This book was released on 1988-03-03 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Second edition of the flow injection analysis (FIA) text which has become a standard in the field in four languages, is written by two pioneers in the field, who have themselves discovered many of the techniques and designed much of the equipment employed in FIA. Newly revised to account for the many recent developments in FIA, this book presents the state-of-the-art in FIA theory, techniques, and future trends. Specific topics covered include continous-flow analyzers, chemical kinetics in an FIA system, theory of dispersion related to FIA, single-line FIA manifolds, FIA determinations based on separation processes, commercially available flow-injection analyzers, the FIA laboratory--a microconduit-based pedagogical system, review of the flow-injection literature, and flow injection analysis now and in the future.