Download or read book Droplet and Digital Microfluidics written by Sanket Goel and published by Elsevier. This book was released on 2024-03-11 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Droplet and Digital Microfluidics: Ideation to Implementation is a detailed introduction to the dynamics of droplet and digital microfluidics, also featuring coverage of new methods and applications. The explosion of applications of microelectromechanical systems (MEMS) in recent years has driven demand for expertise and innovation in fluid flow in the microchannels they contain. In this book, detailed descriptions of methods for biological and chemical applications of microfluidics are provided, along with supporting foundational knowledge. In addition, the principles of droplet and digital microfluidics are explained, along with their different applications and governing physics. New additions to the technological knowledgebase that enable advances in droplet and digital microfluidics include machine learning and exciting future avenues for research. - Provides step-by-step fabrication, testing, and characterization instructions in each chapter to support implementation - Includes explanations of applications and methods in biological and chemical settings - Describes the path to automation of digital and droplet microfluidic platforms
Download or read book Digital Microfluidic Biochips written by Krishnendu Chakrabarty and published by CRC Press. This book was released on 2018-10-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Microfluidic Biochips focuses on the automated design and production of microfluidic-based biochips for large-scale bioassays and safety-critical applications. Bridging areas of electronic design automation with microfluidic biochip research, the authors present a system-level design automation framework that addresses key issues in the design, analysis, and testing of digital microfluidic biochips. The book describes a new generation of microfluidic biochips with more complex designs that offer dynamic reconfigurability, system scalability, system integration, and defect tolerance. Part I describes a unified design methodology that targets design optimization under resource constraints. Part II investigates cost-effective testing techniques for digital microfluidic biochips that include test resource optimization and fault detection while running normal bioassays. Part III focuses on different reconfiguration-based defect tolerance techniques designed to increase the yield and dependability of digital microfluidic biochips. Expanding upon results from ongoing research on CAD for biochips at Duke University, this book presents new design methodologies that address some of the limitations in current full-custom design techniques. Digital Microfluidic Biochips is an essential resource for achieving the integration of microfluidic components in the next generation of system-on-chip and system-in-package designs.
Download or read book Designing Droplet Microfluidic Networks written by Andreas Grimmer and published by Springer. This book was released on 2019-07-04 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes automatic methods for the design of droplet microfluidic networks. The authors discuss simulation and design methods which support the design process of droplet microfluidics in general, as well as design methods for a dedicated droplet routing mechanism, namely passive droplet routing. The methods discussed allow for simulating a microfluidic design on a high-abstraction level, which facilitates early validation of whether a design works as intended, automatically dimensioning a microfluidic design, so that constraints like flow conditions are satisfied, and automatically generating meander designs for the respective needs and fabrication settings. Dedicated methods for passive droplet routing are discussed and allow for designing application-specific architectures for a given set of experiments, as well as generating droplet sequences realizing the respective experiments. Together, these methods provide a comprehensive “toolbox" for designers working on droplet microfluidic networks in general and an integrated design flow for the passive droplet routing mechanism in particular. Provides both a comprehensive “toolbox" for designers working on droplet microfluidic networks in general and an integrated design flow for the passive droplet routing mechanism in particular; Describes for the first time CAD methods for droplet microfluidic networks, along with the first integrated design process; Includes open source implementations, in order to reach the largest possible user group within the domain of microfluidics.
Download or read book Nanotechnology for Microfluidics written by Xingyu Jiang and published by John Wiley & Sons. This book was released on 2020-09-08 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on microfluidics with applications in nanotechnology. The first part summarizes the recent advances and achievements in the field of microfluidic technology, with emphasize on the the influence of nanotechnology. The second part introduces various applications of microfluidics in nanotechnology, such as drug delivery, tissue engineering and biomedical diagnosis.
Download or read book Microfluidics written by Yu Song and published by John Wiley & Sons. This book was released on 2018-05-07 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book offering a global overview of fundamental microfluidics and the wide range of possible applications, for example, in chemistry, biology, and biomedical science. As such, it summarizes recent progress in microfluidics, including its origin and development, the theoretical fundamentals, and fabrication techniques for microfluidic devices. The book also comprehensively covers the fluid mechanics, physics and chemistry as well as applications in such different fields as detection and synthesis of inorganic and organic materials. A useful reference for non-specialists and a basic guideline for research scientists and technicians already active in this field or intending to work in microfluidics.
Download or read book Droplet Microfluidics written by Abraham Lee and published by Royal Society of Chemistry. This book was released on 2020-11-27 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by two leaders, this book has drawn together expertise from around the globe to form a unified, cohesive resource for the droplet microfluidics community. Starting with the basic theory of droplet microfluidics before introducing its use as a tool, the reader is treated to chapters on important techniques, including robust passive and active droplet manipulations and applications such as single cell analysis, which is key for drug discovery. This book is a go-to resource for the community yearning to adopt and promote droplet microfluidics into different applications.
Download or read book Digital Microfluidic Biochips written by Krishnendu Chakrabarty and published by CRC Press. This book was released on 2010-05-03 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics-based biochips combine electronics with biochemistry, providing access to new application areas in a wide variety of fields. Continued technological innovations are essential to assuring the future role of these chips in functional diversification in biotech, pharmaceuticals, and other industries.Revolutionary guidance on design, opti
Download or read book Micro Drops and Digital Microfluidics written by Jean Berthier and published by William Andrew. This book was released on 2012-12-31 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this 2nd edition of Micro-Drops and Digital Microfluidics, Jean Berthier explores the fundamentals and applications of digital microfluidics, enabling engineers and scientists to design this important enabling technology into devices and harness the considerable potential of digital microfluidics in testing and data collection. This book describes the most recent developments in digital microfluidics, with a specific focus on the computational, theoretical and experimental study of microdrops. Unique in its emphasis on digital microfluidics and with diverse applications ranging from drug delivery to point-of-care diagnostic chips, organic synthesis to microreactors, Micro-Drops and Digital Microfluidics meets the needs of audiences across the fields of bioengineering and biotechnology, and electrical and chemical engineering. - Authoritative reporting on the latest changes in microfluidic science, where microscopic liquid volumes are handled as ""microdrops"" and separately from ""nanodrops." - A methodical examination of how liquid microdrops behave in the complex geometries of modern miniaturized systems and interact with different morphological (micro-fabricated, textured) solid substrates - A thorough explanation of how capillary forces act on liquid interfaces in contact with micro-fabricated surfaces - Analysis of how droplets can be manipulated, handled, or transported using electric fields (electrowetting), acoustic actuation (surface acoustic waves), or by a carrier liquid (microflow) - A fresh perspective on the future of microfluidics
Download or read book Microfluidic Devices for Biomedical Applications written by Xiujun James Li and published by Woodhead Publishing. This book was released on 2013-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics or lab-on-a-chip (LOC) is an important technology suitable for numerous applications from drug delivery to tissue engineering. Microfluidic devices for biomedical applications discusses the fundamentals of microfluidics and explores in detail a wide range of medical applications. The first part of the book reviews the fundamentals of microfluidic technologies for biomedical applications with chapters focussing on the materials and methods for microfabrication, microfluidic actuation mechanisms and digital microfluidic technologies. Chapters in part two examine applications in drug discovery and controlled-delivery including micro needles. Part three considers applications of microfluidic devices in cellular analysis and manipulation, tissue engineering and their role in developing tissue scaffolds and stem cell engineering. The final part of the book covers the applications of microfluidic devices in diagnostic sensing, including genetic analysis, low-cost bioassays, viral detection, and radio chemical synthesis. Microfluidic devices for biomedical applications is an essential reference for medical device manufacturers, scientists and researchers concerned with microfluidics in the field of biomedical applications and life-science industries.
Download or read book Advances in Microfluidic Technologies for Energy and Environmental Applications written by Yong Ren and published by BoD – Books on Demand. This book was released on 2020-05-20 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics have aroused a new surge of interest in recent years in environmental and energy areas, and inspired novel applications to tackle the worldwide challenges for sustainable development. This book aims to present readers with a valuable compendium of significant advances in applying the multidisciplinary microfluidic technologies to address energy and environmental problems in a plethora of areas such as environmental monitoring and detection, new nanofluid application in traditional mechanical manufacturing processes, development of novel biosensors, and thermal management. This book will provide a new perspective to the understanding of the ever-growing importance of microfluidics.
Download or read book Design Automation Methods and Tools for Microfluidics Based Biochips written by Jun Zeng and published by Springer. This book was released on 2014-11-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design Automation Methods and Tools for Microfluidics-Based Biochips deals with all aspects of design automation for microfluidics-based biochips. Experts have contributed chapters on many aspects of biochip design automation. Topics covered include: device modeling; adaptation of bioassays for on-chip implementations; numerical methods and simulation tools; architectural synthesis, scheduling and binding of assay operations; physical design and module placement; fault modeling and testing; and reconfiguration methods.
Download or read book Digital Microfluidic Biochips written by Krishnendu Chakrabarty and published by CRC Press. This book was released on 2018-10-03 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Microfluidic Biochips focuses on the automated design and production of microfluidic-based biochips for large-scale bioassays and safety-critical applications. Bridging areas of electronic design automation with microfluidic biochip research, the authors present a system-level design automation framework that addresses key issues in the design, analysis, and testing of digital microfluidic biochips. The book describes a new generation of microfluidic biochips with more complex designs that offer dynamic reconfigurability, system scalability, system integration, and defect tolerance. Part I describes a unified design methodology that targets design optimization under resource constraints. Part II investigates cost-effective testing techniques for digital microfluidic biochips that include test resource optimization and fault detection while running normal bioassays. Part III focuses on different reconfiguration-based defect tolerance techniques designed to increase the yield and dependability of digital microfluidic biochips. Expanding upon results from ongoing research on CAD for biochips at Duke University, this book presents new design methodologies that address some of the limitations in current full-custom design techniques. Digital Microfluidic Biochips is an essential resource for achieving the integration of microfluidic components in the next generation of system-on-chip and system-in-package designs.
Download or read book Micro and Nanoscale Fluid Mechanics written by Brian J. Kirby and published by Cambridge University Press. This book was released on 2010-07-26 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text focuses on the physics of fluid transport in micro- and nanofabricated liquid-phase systems, with consideration of gas bubbles, solid particles, and macromolecules. This text was designed with the goal of bringing together several areas that are often taught separately - namely, fluid mechanics, electrodynamics, and interfacial chemistry and electrochemistry - with a focused goal of preparing the modern microfluidics researcher to analyse and model continuum fluid mechanical systems encountered when working with micro- and nanofabricated devices. This text serves as a useful reference for practising researchers but is designed primarily for classroom instruction. Worked sample problems are included throughout to assist the student, and exercises at the end of each chapter help facilitate class learning.
Download or read book Microdroplet Technology written by Philip Day and published by Springer Science & Business Media. This book was released on 2012-07-28 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microdroplet technology has recently emerged to provide new and diverse applications via microfluidic functionality, especially in various areas of biology and chemistry. This book, then, gives an overview of the principle components and wide-ranging applications for state-of-the-art of droplet-based microfluidics. Chapter authors are internationally-leading researchers from chemistry, biology, physics and engineering that present various key aspects of micrdroplet technology -- fundamental flow physics, methodology and components for flow control, applications in biology and chemistry, and a discussion of future perspectives. This book acts as a reference for academics, post-graduate students, and researcher wishing to deepen their understand of microfluidics and introduce optimal design and operation of new droplet-based microfluidic devices for more comprehensive analyte assessments.
Download or read book Microfluidics and Lab on a Chip written by Andreas Manz and published by Royal Society of Chemistry. This book was released on 2020-09-24 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responding to the need for an affordable, easy-to-read textbook that introduces microfluidics to undergraduate and postgraduate students, this concise book will provide a broad overview of the important theoretical and practical aspects of microfluidics and lab-on-a-chip, as well as its applications.
Download or read book Hardware Software Co Design and Optimization for Cyberphysical Integration in Digital Microfluidic Biochips written by Yan Luo and published by Springer. This book was released on 2014-08-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a comprehensive framework for hardware/software co-design, optimization, and use of robust, low-cost, and cyberphysical digital microfluidic systems. Readers with a background in electronic design automation will find this book to be a valuable reference for leveraging conventional VLSI CAD techniques for emerging technologies, e.g., biochips or bioMEMS. Readers from the circuit/system design community will benefit from methods presented to extend design and testing techniques from microelectronics to mixed-technology microsystems. For readers from the microfluidics domain, this book presents a new design and development strategy for cyberphysical microfluidics-based biochips suitable for large-scale bioassay applications. • Takes a transformative, “cyberphysical” approach towards achieving closed-loop and sensor feedback-driven biochip operation under program control; • Presents a “physically-aware” system reconfiguration technique that uses sensor data at intermediate checkpoints to dynamically reconfigure biochips; • Enables readers to simplify the structure of biochips, while facilitating the “general-purpose” use of digital microfluidic biochips for a wider range of applications.
Download or read book Microfluidics for Biotechnology written by Jean Berthier and published by Artech House. This book was released on 2010 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of microfluidics to biotechnology is an exciting new area that has already begun to revolutionize how researchers study and manipulate macromolecules like DNA, proteins and cells in vitro and within living organisms. Now in a newly revised and expanded second edition, the Artech House bestseller, Microfluidics for Biotechnology brings you to the cutting edge of this burgeoning field. Among the numerous updates, the second edition features three entirely new chapters on: non-dimensional numbers in microfluidics; interface, capillarity and microdrops; and digital, two-phase and droplet microfluidics.Presenting an enlightening balance of numerical approaches, theory, and experimental examples, this book provides a detailed look at the mechanical behavior of the different types of micro/nano particles and macromolecules that are used in biotechnology. You gain a solid understanding of microfluidics theory and the mechanics of microflows and microdrops. The book examines the diffusion of species and nanoparticles, including continuous flow and discrete Monte-Carlo methods.This unique volume describes the transport and dispersion of biochemical species and particles. You learn how to model biochemical reactions, including DNA hybridization and enzymatic reactions. Moreover, the book helps you master the theory, applications, and modeling of magnetic beads behavior and provides an overview of self-assembly and magnetic composite. Other key topics include the electric manipulation of micro/nanoparticles and macromolecules and the experimental aspects of biological macromolecule manipulation.
