Download or read book Drift Scale THM Model written by and published by . This book was released on 2004 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This model report documents the drift scale coupled thermal-hydrological-mechanical (THM) processes model development and presents simulations of the THM behavior in fractured rock close to emplacement drifts. The modeling and analyses are used to evaluate the impact of THM processes on permeability and flow in the near-field of the emplacement drifts. The results from this report are used to assess the importance of THM processes on seepage and support in the model reports ''Seepage Model for PA Including Drift Collapse'' and ''Abstraction of Drift Seepage'', and to support arguments for exclusion of features, events, and processes (FEPs) in the analysis reports ''Features, Events, and Processes in Unsaturated Zone Flow and Transport and Features, Events, and Processes: Disruptive Events''. The total system performance assessment (TSPA) calculations do not use any output from this report. Specifically, the coupled THM process model is applied to simulate the impact of THM processes on hydrologic properties (permeability and capillary strength) and flow in the near-field rock around a heat-releasing emplacement drift. The heat generated by the decay of radioactive waste results in elevated rock temperatures for thousands of years after waste emplacement. Depending on the thermal load, these temperatures are high enough to cause boiling conditions in the rock, resulting in water redistribution and altered flow paths. These temperatures will also cause thermal expansion of the rock, with the potential of opening or closing fractures and thus changing fracture permeability in the near-field. Understanding the THM coupled processes is important for the performance of the repository because the thermally induced permeability changes potentially effect the magnitude and spatial distribution of percolation flux in the vicinity of the drift, and hence the seepage of water into the drift. This is important because a sufficient amount of water must be available within a drift to transport any exposed radionuclides out of the drift to the groundwater below, and eventually to people within the accessible environment. Absent sufficient water, radionuclides cannot be transported and there would be no significant health effect on people, even if radioactive waste containers were damaged or corroded to such an extent that radionuclides were exposed to water.

Download or read book Coupled THM Simulations of the Drift Scale Test at Yucca Mountain written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper presents a coupled thermal-hydrological-mechanical (THM) analysis of the Drift Scale Test (DST) conducted at Yucca Mountain, Nevada. The DST is a large-scale, long-term thermal test designed to investigate coupled thermal-mechanical-hydrological-chemical behavior in a fractured, welded tuff rock mass in support of nuclear waste isolation efforts. The model used for this analysis utilizes temperature distributions predicted by a thermal-hydrological code as input to a distinct element thermal mechanical code. This paper presents a brief discussion of the test and the coupled model, followed by comparison of predicted and measured displacements. Results show that the model predicts the trend and magnitude of the displacements observed in a cross section monitored in the test through four years of heating. Maximum principal stress levels of 60 MPa are predicted in the crown and floor of the heated drift (HD) after 4 years of heating. Comparison of predicted and observed displacements shows that the model closely predicts vertical displacement above the HD and provides a good estimate of horizontal displacement perpendicular to the HD. These results indicate that a thermal expansion coefficient of 9e-6/[Lambda]C is generally appropriate for the rockmass forming this test. Normal displacements on joints in the cross section examined here show opening of up to 2mm on subvertical fractures in regions above and below the HD after 4 years of heating. These fractures do not close upon cooldown, indicating that some permanent enhancement of vertical fracture permeability may occur.

Download or read book Multilevel Modeling of Secure Systems in QoP ML written by Bogdan Księżopolski and published by CRC Press. This book was released on 2015-07-02 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing the Quality of Protection Modeling Language (QoP-ML), this book provides for the abstraction of security systems while maintaining emphasis on the details of quality protection . It delineates the steps used in cryptographic protocol and introduces a multilevel protocol analysis that expands current understanding. Every operation defined by QoP-ML is described within parameters of security metrics, therefore evaluating the impact of the operation on the entire system's security.

Download or read book Thermo Hydromechanical and Chemical Coupling in Geomaterials and Applications written by Jian-Fu Shao and published by John Wiley & Sons. This book was released on 2013-05-10 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: GeoProc2008 collects the proceedings of the International Conference on Coupled T-H-M-C (thermal, hydraulic, mechanical, chemical) Processes in Geosystems.

Download or read book Coupled Thermo Hydro Mechanical Chemical Processes in Geo systems written by Ove Stephansson and published by Elsevier. This book was released on 2004-11-03 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the most important and exciting current steps forward in geo-engineering is the development of coupled numerical models. They represent the basic physics of geo-engineering processes which can include the effects of heat, water, mechanics and chemistry. Such models provide an integrating focus for the wide range of geo-engineering disciplines. The articles within this volume were originally presented at the inaugural GeoProc conference held in Stockholm and contain a collection of unusually high quality information not available elsewhere in an edited and coherent form. This collection not only benefits from the latest theoretical developments but also applies them to a number of practical and wide ranging applications. Examples include the environmental issues around radioactive waste disposal deep in rock, and the search for new reserves of oil and gas.

Download or read book Hydrology and Geochemistry of Yucca Mountain and Vicinity Southern Nevada and California written by John S. Stuckless and published by Geological Society of America. This book was released on 2012 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book MOUNTAIN SCALE COUPLED PROCESSES TH THC THM MODELS written by Y. S. Wu and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This report documents the development and validation of the mountain-scale thermal-hydrologic (TH), thermal-hydrologic-chemical (THC), and thermal-hydrologic-mechanical (THM) models. These models provide technical support for screening of features, events, and processes (FEPs) related to the effects of coupled TH/THC/THM processes on mountain-scale unsaturated zone (UZ) and saturated zone (SZ) flow at Yucca Mountain, Nevada (BSC 2005 [DIRS 174842], Section 2.1.1.1). The purpose and validation criteria for these models are specified in ''Technical Work Plan for: Near-Field Environment and Transport: Coupled Processes (Mountain-Scale TH/THC/THM, Drift-Scale THC Seepage, and Drift-Scale Abstraction) Model Report Integration'' (BSC 2005 [DIRS 174842]). Model results are used to support exclusion of certain FEPs from the total system performance assessment for the license application (TSPA-LA) model on the basis of low consequence, consistent with the requirements of 10 CFR 63.342 [DIRS 173273]. Outputs from this report are not direct feeds to the TSPA-LA. All the FEPs related to the effects of coupled TH/THC/THM processes on mountain-scale UZ and SZ flow are discussed in Sections 6 and 7 of this report. The mountain-scale coupled TH/THC/THM processes models numerically simulate the impact of nuclear waste heat release on the natural hydrogeological system, including a representation of heat-driven processes occurring in the far field. The mountain-scale TH simulations provide predictions for thermally affected liquid saturation, gas- and liquid-phase fluxes, and water and rock temperature (together called the flow fields). The main focus of the TH model is to predict the changes in water flux driven by evaporation/condensation processes, and drainage between drifts. The TH model captures mountain-scale three-dimensional flow effects, including lateral diversion and mountain-scale flow patterns. The mountain-scale THC model evaluates TH effects on water and gas chemistry, mineral dissolution/precipitation, and the resulting impact to UZ hydrologic properties, flow and transport. The mountain-scale THM model addresses changes in permeability due to mechanical and thermal disturbances in stratigraphic units above and below the repository host rock. The THM model focuses on evaluating the changes in UZ flow fields arising out of thermal stress and rock deformation during and after the thermal period (the period during which temperatures in the mountain are significantly higher than ambient temperatures).

Download or read book Crustal Permeability written by Tom Gleeson and published by John Wiley & Sons. This book was released on 2016-11-30 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permeability is the primary control on fluid flow in the Earth’s crust and is key to a surprisingly wide range of geological processes, because it controls the advection of heat and solutes and the generation of anomalous pore pressures. The practical importance of permeability – and the potential for large, dynamic changes in permeability – is highlighted by ongoing issues associated with hydraulic fracturing for hydrocarbon production (“fracking”), enhanced geothermal systems, and geologic carbon sequestration. Although there are thousands of research papers on crustal permeability, this is the first book-length treatment. This book bridges the historical dichotomy between the hydrogeologic perspective of permeability as a static material property and the perspective of other Earth scientists who have long recognized permeability as a dynamic parameter that changes in response to tectonism, fluid production, and geochemical reactions.

Download or read book Rock Mechanics and Engineering Volume 3 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-04-21 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis, Modeling & Design is the third volume of the five-volume set Rock Mechanics and Engineering and contains twenty-eight chapters from key experts in the following fields: - Numerical Modeling Methods; - Back Analysis; - Risk Analysis; - Design and Stability Analysis: Overviews; - Design and Stability Analysis: Coupling Process Analysis; - Design and Stability Analysis: Blast Analysis and Design; - Rock Slope Stability Analysis and Design; - Analysis and Design of Tunnels, Caverns and Stopes. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.

Download or read book Modelling Simulation and Software Concepts for Scientific Technological Problems written by Ernst Stephan and published by Springer Science & Business Media. This book was released on 2011-04-28 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes different contributions that cover interdisciplinary research in the areas of · Error controlled numerical methods, efficient algorithms and software development · Elastic and in elastic deformation processes · Models with multiscales and multi-physics “High Performance” adaptive numerical methods using finite elements (FEM) and boundary elements (BEM) are described as well as efficient solvers for linear systems and corresponding software components for non-linear, coupled field equations of various branches of mechanics, electromagnetics, and geosciences.

Download or read book Option Pricing in Fractional Brownian Markets written by Stefan Rostek and published by Springer Science & Business Media. This book was released on 2009-04-28 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mandelbrot and van Ness (1968) suggested fractional Brownian motion as a parsimonious model for the dynamics of ?nancial price data, which allows for dependence between returns over time. Starting with Rogers(1997) there is an ongoing dispute on the proper usage of fractional Brownian motion in option pricing theory. Problems arise because fractional Brownian motion is not a semimartingale and therefore “no arbitrage pricing” cannot be applied. While this is consensus, the consequences are not as clear. The orthodox interpretation is simply that fractional Brownian motion is an inadequate candidate for a price process. However, as shown by Cheridito (2003) any theoretical arbitrage opportunities disappear by assuming that market p- ticipants cannot react instantaneously. This is the point of departure of Rostek’s dissertation. He contributes to this research in several respects: (i) He delivers a thorough introduction to fr- tional integration calculus and uses the binomial approximation of fractional Brownianmotion to give the reader a ?rst idea of this special market setting.

Download or read book U S Nuclear Waste Technical Review Board Report to the U S Congress and the Secretary of Energy January to December 1998 written by and published by DIANE Publishing. This book was released on with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NARMS TAC 2002 written by Reginald Hammah and published by . This book was released on 2002 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geological Disposal of Radioactive Waste in Deep Clay Formations written by X.L. Li and published by Geological Society of London Special Publications. This book was released on 2023-09-01 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of research into the geological disposal of radioactive waste in Belgium, the HADES underground research laboratory (URL) was constructed in a clay formation in the early 1980s. This was the world's first purpose-built URL in a deep clay formation. Over the past four decades, the HADES URL has played an important role in the research, development and demonstration (RD&D) of geological disposal. It enabled the in situ characterization of the clay host rock, it allowed experiments to be performed under realistic geological conditions and it demonstrated the feasibility of constructing, operating and closing underground repositories. This volume presents several key contributions of the HADES URL to both Belgian and international research into geological disposal. It not only compiles some important RD&D results, but also illustrates the essential role URLs such as the HADES URL have played in developing concepts for the geological disposal of radioactive waste.

Download or read book Modelling Stock Market Volatility written by Peter H. Rossi and published by Elsevier. This book was released on 1996-11-19 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essay collection focuses on the relationship between continuous time models and Autoregressive Conditionally Heteroskedastic (ARCH) models and applications. For the first time, Modelling Stock Market Volatility provides new insights about the links between these two models and new work on practical estimation methods for continuous time models. Featuring the pioneering scholarship of Daniel Nelson, the text presents research about the discrete time model, continuous time limits and optimal filtering of ARCH models, and the specification and estimation of continuous time processes. This work will lead to a rapid growth in their empirical application as they are increasingly subjected to routine specification testing. - Provides for the first time new insights on the links between continuous time and ARCH models - Collects seminal scholarship by some of the most renowned researchers in finance and econometrics - Captures complex arguments underlying the approximation and proper statistical modelling of continuous time volatility dynamics

Download or read book Fluctuations in Markov Processes written by Tomasz Komorowski and published by Springer Science & Business Media. This book was released on 2012-07-05 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volume contains the most advanced theories on the martingale approach to central limit theorems. Using the time symmetry properties of the Markov processes, the book develops the techniques that allow us to deal with infinite dimensional models that appear in statistical mechanics and engineering (interacting particle systems, homogenization in random environments, and diffusion in turbulent flows, to mention just a few applications). The first part contains a detailed exposition of the method, and can be used as a text for graduate courses. The second concerns application to exclusion processes, in which the duality methods are fully exploited. The third part is about the homogenization of diffusions in random fields, including passive tracers in turbulent flows (including the superdiffusive behavior). There are no other books in the mathematical literature that deal with this kind of approach to the problem of the central limit theorem. Hence, this volume meets the demand for a monograph on this powerful approach, now widely used in many areas of probability and mathematical physics. The book also covers the connections with and application to hydrodynamic limits and homogenization theory, so besides probability researchers it will also be of interest also to mathematical physicists and analysts.

Download or read book Dispersive Transport Equations and Multiscale Models written by Ben Abdallah Naoufel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: IMA Volumes 135: Transport in Transition Regimes and 136: Dispersive Transport Equations and Multiscale Models focus on the modeling of processes for which transport is one of the most complicated components. This includes processes that involve a wdie range of length scales over different spatio-temporal regions of the problem, ranging from the order of mean-free paths to many times this scale. Consequently, effective modeling techniques require different transport models in each region. The first issue is that of finding efficient simulations techniques, since a fully resolved kinetic simulation is often impractical. One therefore develops homogenization, stochastic, or moment based subgrid models. Another issue is to quantify the discrepancy between macroscopic models and the underlying kinetic description, especially when dispersive effects become macroscopic, for example due to quantum effects in semiconductors and superfluids. These two volumes address these questions in relation to a wide variety of application areas, such as semiconductors, plasmas, fluids, chemically reactive gases, etc.