Download or read book Mathematical Modeling of Biofilms written by IWA Task Group on Biofilm Modeling and published by IWA Publishing. This book was released on 2006-04-30 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 90% of bacterial biomass exists in the form of biofilms. The ability of bacteria to attach to surfaces and to form biofilms often is an important competitive advantage for them over bacteria growing in suspension. Some biofilms are "good" in natural and engineered systems; they are responsible for nutrient cycling in nature and are used to purify waters in engineering processes. Other biofilms are "bad" when they cause fouling and infections of humans and plants. Whether we want to promote good biofilms or eliminate bad biofilms, we need to understand how they work and what works to control them. Mathematical Modeling of Biofilms provides guidelines for the selection and use of mathematical models of biofilms. The whole range of existing models - from simple analytical expressions to complex numerical models - is covered. The application of the models for the solution of typical problems is demonstrated, and the performance of the models is tested in comparative studies. With the dramatic evolution of the computational capacity still going on, modeling tools for research and practice will become more and more significant in the next few years. This report provides the foundation to understand the models and to select the most appropriate one for a given use. Mathematical Modeling of Biofilms gives a state-of-the-art overview that is especially valuable for educating students, new biofilm researchers, and design engineers. Through a series of three benchmark problems, the report demonstrates how to use the different models and indicates when simple or highly complex models are most appropriate. This is the first report to give a quantitative comparison of existing biofilm models. The report supports model-based design of biofilm reactors. The report can be used as basis for teaching biofilm-system modeling. The report provides the foundation for researchers seeking to use biofilm modeling or to develop new biofilm models. Scientific and Technical Report No.18

Download or read book Sequencing Batch Reactor Technology written by Peter A. Wilderer and published by IWA Publishing. This book was released on 2001-03-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report highlights various types of SBRs, design considerations and procedures, equipment required, and experiences gained from practical applications. This report will help both designers and operators of SBRs understand how to use this technology successfully. The focus is on the application of fill-and-draw, variable volume, periodically operated, unsteady-state principles to activated sludge systems. Research findings are presented, from both the laboratory and pilot and full scale SBRs. Also included is a description of trends for technological developments and a discussion of open questions regarding research, development, application, and operation. Contents Introduction Fundamentals of Periodic Processes General Overview of SBR Applications Design of Activated Sludge SBR Plants Equipment and Instrumentation Practical Experiences Evaluation of SBR Facilities in Australia Evaluation of SBR Facilities in the USA and Canada Evaluation of SBR Facilities in Germany Evaluation of SBR Facilities in France Evaluation of SBR facilities in Japan Scientific and Technical Report No. 10

Download or read book Post Treatments of Anaerobically Treated Effluents written by Vinay Kumar Tyagi and published by IWA Publishing. This book was released on 2019-06-15 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The anaerobic process is considered to be a sustainable technology for organic waste treatment mainly due to its lower energy consumption and production of residual solids coupled with the prospect of energy recovery from the biogas generated. However, the anaerobic process cannot be seen as providing the ‘complete’ solution as its treated effluents would typically not meet the desired discharge limits in terms of residual carbon, nutrients and pathogens. This has given impetus to subsequent post treatment in order to meet the environmental legislations and protect the receiving water bodies and environment. This book discusses anaerobic treatment from the perspective of organic wastes and wastewaters (municipal and industrial) followed by various post-treatment options for anaerobic effluent polishing and resource recovery. Coverage will also be from the perspective of future trends and thoughts on anaerobic technologies being able to support meeting the increasingly stringent disposal standards. The resource recovery angle is particularly interesting as this can arguably help achieve the circular economy. It is intended the information can be used to identify appropriate solutions for anaerobic effluent treatment and possible alternative approaches to the commonly applied post-treatment techniques. The succeeding discussion is intended to lead on to identification of opportunities for further research and development. This book can be used as a standard reference book and textbook in universities for Master and Doctoral students. The academic community relevant to the subject, namely faculty, researchers, scientists, and practicing engineers, will find the book both informative and as a useful source of successful case studies.

Download or read book The Combined Sharon Anammox Process written by L. G. J. M. van Dongen and published by IWA Publishing. This book was released on 2001-09-30 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater treatment management, alongside many other industries, is seeking to attain a higher degree of sustainability for its processes by focusing on new technologies which minimise the consumption of resources or even recover them from the wastewater. Conventional removal of ammonium requires usually large amounts of energy for aeration and organic carbon for denitrification. This report focuses on making the nitrogen-removal process more sustainable. This can be achieved by a partial oxidation of ammonium to nitrite, after which the nitrate produced can be converted into nitrogen gas with the rest of ammonium under anoxic conditions. The treatment of nitrogen-rich water can be carried out beneficially by a combination of the Sharon process with the Anammox process. In this combined process less than 50% of the aeration energy is needed, no COD is required and an insignificant amount of sludge is produced. In this Report the potential of using this technology for the treatment of water arising from sludge treatment at a municipal wastewater treatment plant (WWTP) is evaluated and the results of the operation of the system are described in detail. This reject water contains a significant fraction of the N-load towards the wastewater treatment plant. The results are used in an economic evaluation of a potential full scale installation. The Combined Sharon/Anammox Process Report will provide an invaluable source of information for all those concerned with the efficient and sustainable treatment of wastewater including plant managers, process designers, consultants and researchers.

Download or read book Bioelectrochemical Systems written by Korneel Rabaey and published by IWA Publishing. This book was released on 2009-12-01 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the context of wastewater treatment, Bioelectrochemical Systems (BESs) have gained considerable interest in the past few years, and several BES processes are on the brink of application to this area. This book, written by a large number of world experts in the different sub-topics, describes the different aspects and processes relevant to their development. Bioelectrochemical Systems (BESs) use micro-organisms to catalyze an oxidation and/or reduction reaction at an anodic and cathodic electrode respectively. Briefly, at an anode oxidation of organic and inorganic electron donors can occur. Prime examples of such electron donors are waste organics and sulfides. At the cathode, an electron acceptor such as oxygen or nitrate can be reduced. The anode and the cathode are connected through an electrical circuit. If electrical power is harvested from this circuit, the system is called a Microbial Fuel Cell; if electrical power is invested, the system is called a Microbial Electrolysis Cell. The overall framework of bio-energy and bio-fuels is discussed. A number of chapters discuss the basics – microbiology, microbial ecology, electrochemistry, technology and materials development. The book continues by highlighting the plurality of processes based on BES technology already in existence, going from wastewater based reactors to sediment based bio-batteries. The integration of BESs into existing water or process lines is discussed. Finally, an outlook is provided of how BES will fit within the emerging biorefinery area.

Download or read book Biofilms in Wastewater Treatment written by Stefan Wuertz and published by IWA Publishing. This book was released on 2003-04-30 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The central theme of the book is the flow of information from experimental approaches in biofilm research to simulation and modeling of complex wastewater systems. Probably the greatest challenge in wastewater research lies in using the methods and the results obtained in one scientific discipline to design intelligent experiments in other disciplines, and eventually to improve the knowledge base the practitioner needs to run wastewater treatment plants. The purpose of Biofilms in Wastewater Treatment is to provide engineers with the knowledge needed to apply the new insights gained by researchers. The authors provide an authoritative insight into the function of biofilms on a technical and on a lab-scale, cover some of the exciting new basic microbiological and wastewater engineering research involving molecular biology techniques and microscopy, and discuss recent attempts to predict the development of biofilms. This book is divided into 3 sections: Modeling and Simulation; Architecture, Population Structure and Function; and From Fundamentals to Practical Application, which all start with a scientific question. Individual chapters attempt to answer the question and present different angles of looking at problems. In addition there is an extensive glossary to familiarize the non-expert with unfamiliar terminology used by microbiologists and computational scientists. The colour plate section of this book can be downloaded by clicking here. (PDF Format 1 MB)

Download or read book Microbial Electrochemical Technologies written by Sonia M. Tiquia-Arashiro and published by CRC Press. This book was released on 2020-01-06 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book encompasses the most updated and recent account of research and implementation of Microbial Electrochemical Technologies (METs) from pioneers and experienced researchers in the field who have been working on the interface between electrochemistry and microbiology/biotechnology for many years. It provides a holistic view of the METs, detailing the functional mechanisms, operational configurations, influencing factors governing the reaction process and integration strategies. The book not only provides historical perspectives of the technology and its evolution over the years but also the most recent examples of up-scaling and near future commercialization, making it a must-read for researchers, students, industry practitioners and science enthusiasts. Key Features: Introduces novel technologies that can impact the future infrastructure at the water-energy nexus. Outlines methodologies development and application of microbial electrochemical technologies and details out the illustrations of microbial and electrochemical concepts. Reviews applications across a wide variety of scales, from power generation in the laboratory to approaches. Discusses techniques such as molecular biology and mathematical modeling; the future development of this promising technology; and the role of the system components for the implementation of bioelectrochemical technologies for practical utility. Explores key challenges for implementing these systems and compares them to similar renewable energy technologies, including their efficiency, scalability, system lifetimes, and reliability.

Download or read book Dynamical Modelling Estimation in Wastewater Treatment Processes written by D. Dochain and published by IWA Publishing. This book was released on 2001-12-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental quality is becoming an increasing concern in our society. In that context, waste and wastewater treatment, and more specifically biological wastewater treatment processes play an important role. In this book, we concentrate on the mathematical modelling of these processes. The main purpose is to provide the increasing number of professionals who are using models to design, optimise and control wastewater treatment processes with the necessary background for their activities of model building, selection and calibration. The book deals specifically with dynamic models because they allow us to describe the behaviour of treatment plants under the highly dynamic conditions that we want them to operate (e.g. Sequencing Batch Reactors) or we have to operate them (e.g. storm conditions, spills). Further extension is provided to new reactor systems for which partial differential equation descriptions are necessary to account for their distributed parameter nature (e.g. settlers, fixed bed reactors). The model building exercise is introduced as a step-wise activity that, in this book, starts from mass balancing principles. In many cases, different hypotheses and their corresponding models can be proposed for a particular process. It is therefore essential to be able to select from these candidate models in an objective manner. To this end, structure characterisation methods are introduced. Important sections of the book deal with the collection of high quality data using optimal experimental design, parameter estimation techniques for calibration and the on-line use of models in state and parameter estimators. Contents Dynamical Modelling Dynamical Mass Balance Model Building and Analysis Structure Characterisation (SC) Structural Identifiability Practical Identifiability and Optimal Experiment Design for Parameter Estimation (OED/PE) Estimation of Model Parameters Recursive State and Parameter Estimation Glossary Nomenclature

Download or read book Biology of the Nitrogen Cycle written by Hermann Bothe and published by Elsevier. This book was released on 2007 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aerobic Fixed growth Reactors written by and published by . This book was released on 2000 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides background information through a review of technical practices and procedures that research and experience have shown to be functional and practical. Chapters cover topics such as fixed-growth processes, biology of fixed-growth reactors, trickling filter processes, rotating biolog

Download or read book Wastewater Microbiology written by Gabriel Bitton and published by John Wiley & Sons. This book was released on 2011-06-09 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater Microbiology focuses on microbial contaminants found in wastewater, methods of detection for these contaminants, and methods of cleansing water of microbial contamination. This classic reference has now been updated to focus more exclusively on issues particular to wastewater, with new information on fecal contamination and new molecular methods. The book features new methods to determine cell viability/activity in environmental samples; a new section on bacterial spores as indicators; new information covering disinfection byproducts, UV disinfection, and photoreactivation; and much more. A PowerPoint of figures from the book is available at ftp://ftp.wiley.com/public/sci_tech_med/wastewater_microbiology.

Download or read book Aqueous Ammonia Equilibrium written by Robert V. Thurston and published by . This book was released on 1979 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Waste Treatment in the Food Processing Industry written by Lawrence K. Wang and published by CRC Press. This book was released on 2005-09-29 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many standard industrial waste treatment texts sufficiently address a few major technologies for conventional in-plant environmental control strategies in the food industry. But none explore the complete range of technologies with a focus on new developments in innovative and alternative technology, design criteria, effluent standards, managerial d

Download or read book Handbook of Biological Wastewater Treatment written by Adrianus van Haandel and published by IWA Publishing. This book was released on 2012-02-20 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of this comprehensive new edition of Handbook of Biological Wastewater Treatment ranges from the design of the activated sludge system, final settlers, auxiliary units (sludge thickeners and digesters) to pre-treatment units such as primary settlers and UASB reactors. The core of the book deals with the optimized design of biological and chemical nutrient removal. The book presents the state-of-the-art theory concerning the various aspects of the activated sludge system and develops procedures for optimized cost-based design and operation. It offers a truly integrated cost-based design method that can be easily implemented in spreadsheets and adapted to the particular needs of the user. Handbook of Biological Wastewater Treatment: Second Edition incorporates valuable new material that improves the instructive qualities of the first edition. The book has a new structure that makes the material more readily understandable and the numerous additional examples clarify the text. On the website www.wastewaterhandbook.com three free excel design spreadsheets for different configurations (secondary treatment with and without primary settling and nitrogen removal) can be downloaded to get the reader started with their own design projects. New sections have been added throughout: to explain the difference between true and apparent yield while the section on the F/M ratio, and especially the reasons not to use it, has been expanded; to demonstrate the effect of the oxygen recycle to the anoxic zones on both the denitrification capacity and the concept of available nitrate is explained in more detail. the latest developments on the causes and solution to sludge bulking and scum formation to show the rapid developments of innovative nitrogen removal and sludge separation problems the anaerobic pre-treatment section is completely rewritten based on the experiences obtained from an extensive review of large full-scale UASB based sewage treatment plants a new section on industrial anaerobic wastewater treatment three new appendices have been added. These deal with the calibration of the denitrification model, empirical design guidelines for final settler design (STORA/STOWA and ATV) and with the potential for development of denitrification in the final settler. A new chapter on moving bed biofilm reactors Handbook of Biological Wastewater Treatment: Second Edition is written for post graduate students and engineers in consulting firms and environmental protection agencies. It is an invaluable resource for everybody working in the field of wastewater treatment. Lecturer support material is available when adopted for university courses. This includes course material for the first 7 modules in the form of PDF printouts and an exercise file with questions and answers and a symbol list. Authors: Prof. dr. ir. A.C. van Haandel, Federal University of Campina Grande - Brazil and Ir. J.G.M. van der Lubbe, Biothane Systems International - Veolia, The Netherlands

Download or read book Handbook of Membrane Reactors written by Angelo Basile and published by Elsevier. This book was released on 2013-04-04 with total page 973 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane reactors are increasingly replacing conventional separation, process and conversion technologies across a wide range of applications. Exploiting advanced membrane materials, they offer enhanced efficiency, are very adaptable and have great economic potential. There has therefore been increasing interest in membrane reactors from both the scientific and industrial communities, stimulating research and development. The two volumes of the Handbook of membrane reactors draw on this research to provide an authoritative review of this important field.Volume 2 reviews reactor types and industrial applications, beginning in part one with a discussion of selected types of membrane reactor and integration of the technology with industrial processes. Part two goes on to explore the use of membrane reactors in chemical and large-scale hydrogen production from fossil fuels. Electrochemical devices and transport applications of membrane reactors are the focus of part three, before part four considers the use of membrane reactors in environmental engineering, biotechnology and medicine. Finally, the book concludes with a discussion of the economic aspects of membrane reactors.With its distinguished editor and international team of expert contributors, the two volumes of the Handbook of membrane reactors provide an authoritative guide for membrane reactor researchers and materials scientists, chemical and biochemical manufacturers, industrial separations and process engineers, and academics in this field. - Discusses integration of membrane technology with industrial processes - Explores the use of membrane reactors in chemical and large-scale hydrogen production from fossil fuels - Considers electrochemical devices and transport applications of membrane reactors

Download or read book Wastewater Engineering written by George Tchobanoglous and published by College Ie Overruns. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a thorough update of an authoritative book on wastewater treatment. This text describes the rapidly evolving field of wastewater engineering technological and regulatory changes that have occurred over the last ten years in this discipline and it includes: a new view of a wastewater as a source of energy, nutrients and potable water; more stringent discharge requirements related to nitrogen and phosphorus; enhanced understanding of the fundamental microbiology and physiology of the microorganisms responsible for the removal of nitrogen and phosphorus and other constituents; an appreciation of the importance of the separate treatment of return flows with respect to meeting more stringent standards for nitrogen removal and opportunities for nutrient recovery; increased emphasis on the treatment of sludge and the management of biosolids; increased awareness of carbon footprints impacts and greenhouse gas emissions, and an emphasis on the development of energy neutral or energy positive wastewater plants through more efficient use of chemical and heat energy in wastewater. This revision contains a strong focus on advanced wastewater treatment technologies and stresses the reuse aspects of wastewater and biosolids.

Download or read book An Applied Guide to Water and Effluent Treatment Plant Design written by Sean Moran and published by Butterworth-Heinemann. This book was released on 2018-06-01 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Applied Guide to Water and Effluent Treatment Plant Design is ideal for chemical, civil and environmental engineering students, graduates, and early career water engineers as well as more experienced practitioners who are transferring into the water sector. It brings together the design of process, wastewater, clean water, industrial effluent and sludge treatment plants, looking at the different treatment objectives within each sub-sector, selection and design of physical, chemical and biological treatment processes, and the professional hydraulic design methodologies. This book will show you how to carry out the key steps in the process design of all kinds of water and effluent treatment plants. It provides an essential refresher on the relevant underlying principles of engineering science, fluid mechanics, water chemistry and biology, together with a thorough description of the heuristics and rules of thumb commonly used by experienced practitioners. The water treatment plant designer will also find specific advice on plant layout, aesthetics, economic considerations and related issues such as odor control. The information contained in this book is usually provided on the job by mentors so it will remain a vital resource throughout your career. - Explains how to design water and effluent treatment plants that really work - Accessible introduction to, and overview of, the area that is written from a process engineering perspective - Covers new treatment technologies and the whole process, from treatment plant design, to commissioning