Download or read book Engineering a Safer World written by Nancy G. Leveson and published by MIT Press. This book was released on 2012-01-13 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new approach to safety, based on systems thinking, that is more effective, less costly, and easier to use than current techniques. Engineering has experienced a technological revolution, but the basic engineering techniques applied in safety and reliability engineering, created in a simpler, analog world, have changed very little over the years. In this groundbreaking book, Nancy Leveson proposes a new approach to safety—more suited to today's complex, sociotechnical, software-intensive world—based on modern systems thinking and systems theory. Revisiting and updating ideas pioneered by 1950s aerospace engineers in their System Safety concept, and testing her new model extensively on real-world examples, Leveson has created a new approach to safety that is more effective, less expensive, and easier to use than current techniques. Arguing that traditional models of causality are inadequate, Leveson presents a new, extended model of causation (Systems-Theoretic Accident Model and Processes, or STAMP), then shows how the new model can be used to create techniques for system safety engineering, including accident analysis, hazard analysis, system design, safety in operations, and management of safety-critical systems. She applies the new techniques to real-world events including the friendly-fire loss of a U.S. Blackhawk helicopter in the first Gulf War; the Vioxx recall; the U.S. Navy SUBSAFE program; and the bacterial contamination of a public water supply in a Canadian town. Leveson's approach is relevant even beyond safety engineering, offering techniques for “reengineering” any large sociotechnical system to improve safety and manage risk.
Download or read book Urban Transportation Networks written by Yosef Sheffi and published by Prentice Hall. This book was released on 1984 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Productivity in Construction written by S. P. Dozzi and published by . This book was released on 1993 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety I and Safety II written by Erik Hollnagel and published by CRC Press. This book was released on 2018-04-17 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety has traditionally been defined as a condition where the number of adverse outcomes was as low as possible (Safety-I). From a Safety-I perspective, the purpose of safety management is to make sure that the number of accidents and incidents is kept as low as possible, or as low as is reasonably practicable. This means that safety management must start from the manifestations of the absence of safety and that - paradoxically - safety is measured by counting the number of cases where it fails rather than by the number of cases where it succeeds. This unavoidably leads to a reactive approach based on responding to what goes wrong or what is identified as a risk - as something that could go wrong. Focusing on what goes right, rather than on what goes wrong, changes the definition of safety from ’avoiding that something goes wrong’ to ’ensuring that everything goes right’. More precisely, Safety-II is the ability to succeed under varying conditions, so that the number of intended and acceptable outcomes is as high as possible. From a Safety-II perspective, the purpose of safety management is to ensure that as much as possible goes right, in the sense that everyday work achieves its objectives. This means that safety is managed by what it achieves (successes, things that go right), and that likewise it is measured by counting the number of cases where things go right. In order to do this, safety management cannot only be reactive, it must also be proactive. But it must be proactive with regard to how actions succeed, to everyday acceptable performance, rather than with regard to how they can fail, as traditional risk analysis does. This book analyses and explains the principles behind both approaches and uses this to consider the past and future of safety management practices. The analysis makes use of common examples and cases from domains such as aviation, nuclear power production, process management and health care. The final chapters explain the theoret
Download or read book Intelligent Computing in Engineering and Architecture written by Ian F.C. Smith and published by Springer Science & Business Media. This book was released on 2006-10-02 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of the 13th Workshop of the European Group for Intelligent Computing in Engineering and Architecture, EG-ICE 2006, held in Ascona, Switzerland in June 2006. The 59 revised full papers were carefully reviewed and selected from numerous submissions for inclusion in the book. All issues of advanced informatics are covered including a range of techniques.
Download or read book Calculus written by Gilbert Strang and published by . This book was released on 2016-03-07 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Published by OpenStax College, Calculus is designed for the typical two- or three-semester general calculus course, incorporating innovative features to enhance student learning. The book guides students through the core concepts of calculus and helps them understand how those concepts apply to their lives and the world around them. Due to the comprehensive nature of the material, we are offering the book in three volumes for flexibility and efficiency. Volume 2 covers integration, differential equations, sequences and series, and parametric equations and polar coordinates."--BC Campus website.
Download or read book The Sources of Innovation written by Eric von Hippel and published by Oxford University Press, USA. This book was released on 1988 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has long been assumed that new product innovations are typically developed by product manufacturers, an assumption that has inevitably had a major impact on innovation-related research and activities ranging from how firms organize their research and development to how governments measure innovation. In this synthesis of his seminal research, von Hippel challenges that basic assumption and demonstrates that innovation occurs in different places in different industries. Presenting a series of studies showing that end-users, material suppliers, and others are the typical sources of innovation in some fields, von Hippel explores why this variation in the "functional" sources of innovation occurs and how it might be predicted. He also proposes and tests some implications of replacing a manufacturer-as-innovator assumption with a view of the innovation process as predictably distributed across users, manufacturers, and suppliers. Innovation, he argues, will take place where there is greatest economic benefit to the innovator.
Download or read book Engineering Philosophy written by Louis L. Bucciarelli and published by Delft University Press. This book was released on 2003 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering and Philosophy seem two worlds apart. But things and ideas are not disjunct in this world, and their synthesis is certainly essential in engineering design. In this book, the author explores how the concerns of philosophers are relevant to engineering thought and practice -in negotiating tradeoffs, in diagnosing failure, in constructing adequate models and simulations, and in teaching. This book is based on a number of lectures given at the Technical University of Delft, where the author was a Visiting Professor hosted by the Philosophy section and the School of Industrial Engineering Design. Louis Bucciarelli is a Professor of Engineering and Technology Studies at MIT. He is the author of numerous publications including the book Designing Engineers. Contents include: Designing, like language, is a social process, What engineers don't know & why they believe it, Knowing that and how, Learning engineering, Extrapolation, Index.
Download or read book Entrepreneurial Impact written by Edward B. Roberts and published by Now Publishers Inc. This book was released on 2011 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Entrepreneurial Impact: The Role of MIT -- An Updated Report helps us understand the economic impact of the entrepreneurial ventures of university graduates. We know that some universities play an important role in many economies through their core education, research and development, and other spillovers... While MIT's leadership in developing successful entrepreneurs has been evident anecdotally, this study--one of the largest surveys of entrepreneur alumni ever conducted--quantifies the significant impact of MIT's entrepreneurial ecosystem that supports firm startups."--P.[4] of cover
Download or read book The Social Construction of Technological Systems written by Wiebe E. Bijker and published by MIT Press. This book was released on 1989 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The impact of technology on society is clear and unmistakeable. The influence of society on technology is more subtle. The 13 essays in this book have been written by a diverse group of scholars united by a common interest in creating a new field - the sociology of technology. They draw on a wide array of case studies - from cooking stoves to missile systems, from 15th-century Portugal to today's Al labs - to outline an original research program based on a synthesis of ideas from the social studies of science and the history of technology. Together they affirm the need for a study of technology that gives equal weight to technical, social, economic, and political questions"--Back cover.
Download or read book Contesting The Future Of Nuclear Power A Critical Global Assessment Of Atomic Energy written by Benjamin K Sovacool and published by World Scientific Publishing Company. This book was released on 2011-05-05 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise but rigorous appraisal about the future of nuclear power and the presumed nuclear renaissance. It does so by assessing the technical, economic, environmental, political, and social risks related to all aspects of the nuclear fuel cycle, from uranium mills and mines to nuclear reactors and spent fuel storage facilities. In each case, the book argues that the costs of nuclear power significantly outweigh its benefits. It concludes by calling for investments in renewable energy and energy efficiency as a better path towards an affordable, secure, and socially acceptable future.The prospect of a global nuclear renaissance could change the way that energy is produced and used the world over. Sovacool takes a hard look at who would benefit — mostly energy companies and manufacturers — and who would suffer — mostly taxpayers, those living near nuclear facilities, and electricity customers. This book is a must-read for anyone even remotely concerned about a sustainable energy future, and also for those with a specific interest in modern nuclear power plants.
Download or read book The Work of the Future written by David H. Autor and published by MIT Press. This book was released on 2022-06-21 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why the United States lags behind other industrialized countries in sharing the benefits of innovation with workers and how we can remedy the problem. The United States has too many low-quality, low-wage jobs. Every country has its share, but those in the United States are especially poorly paid and often without benefits. Meanwhile, overall productivity increases steadily and new technology has transformed large parts of the economy, enhancing the skills and paychecks of higher paid knowledge workers. What’s wrong with this picture? Why have so many workers benefited so little from decades of growth? The Work of the Future shows that technology is neither the problem nor the solution. We can build better jobs if we create institutions that leverage technological innovation and also support workers though long cycles of technological transformation. Building on findings from the multiyear MIT Task Force on the Work of the Future, the book argues that we must foster institutional innovations that complement technological change. Skills programs that emphasize work-based and hybrid learning (in person and online), for example, empower workers to become and remain productive in a continuously evolving workplace. Industries fueled by new technology that augments workers can supply good jobs, and federal investment in R&D can help make these industries worker-friendly. We must act to ensure that the labor market of the future offers benefits, opportunity, and a measure of economic security to all.
Download or read book Advanced Calculus Revised Edition written by Lynn Harold Loomis and published by World Scientific Publishing Company. This book was released on 2014-02-26 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authorised reissue of the long out of print classic textbook, Advanced Calculus by the late Dr Lynn Loomis and Dr Shlomo Sternberg both of Harvard University has been a revered but hard to find textbook for the advanced calculus course for decades.This book is based on an honors course in advanced calculus that the authors gave in the 1960's. The foundational material, presented in the unstarred sections of Chapters 1 through 11, was normally covered, but different applications of this basic material were stressed from year to year, and the book therefore contains more material than was covered in any one year. It can accordingly be used (with omissions) as a text for a year's course in advanced calculus, or as a text for a three-semester introduction to analysis.The prerequisites are a good grounding in the calculus of one variable from a mathematically rigorous point of view, together with some acquaintance with linear algebra. The reader should be familiar with limit and continuity type arguments and have a certain amount of mathematical sophistication. As possible introductory texts, we mention Differential and Integral Calculus by R Courant, Calculus by T Apostol, Calculus by M Spivak, and Pure Mathematics by G Hardy. The reader should also have some experience with partial derivatives.In overall plan the book divides roughly into a first half which develops the calculus (principally the differential calculus) in the setting of normed vector spaces, and a second half which deals with the calculus of differentiable manifolds.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Position Navigation and Timing Technologies in the 21st Century Volumes 1 and 2 written by Y. Jade Morton and published by John Wiley & Sons. This book was released on 2020-12-17 with total page 2064 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the latest developments in PNT technologies, including integrated satellite navigation, sensor systems, and civil applications Featuring sixty-four chapters that are divided into six parts, this two-volume work provides comprehensive coverage of the state-of-the-art in satellite-based position, navigation, and timing (PNT) technologies and civilian applications. It also examines alternative navigation technologies based on other signals-of-opportunity and sensors and offers a comprehensive treatment on integrated PNT systems for consumer and commercial applications. Volume 1 of Position, Navigation, and Timing Technologies in the 21st Century: Integrated Satellite Navigation, Sensor Systems, and Civil Applications contains three parts and focuses on the satellite navigation systems, technologies, and engineering and scientific applications. It starts with a historical perspective of GPS development and other related PNT development. Current global and regional navigation satellite systems (GNSS and RNSS), their inter-operability, signal quality monitoring, satellite orbit and time synchronization, and ground- and satellite-based augmentation systems are examined. Recent progresses in satellite navigation receiver technologies and challenges for operations in multipath-rich urban environment, in handling spoofing and interference, and in ensuring PNT integrity are addressed. A section on satellite navigation for engineering and scientific applications finishes off the volume. Volume 2 of Position, Navigation, and Timing Technologies in the 21st Century: Integrated Satellite Navigation, Sensor Systems, and Civil Applications consists of three parts and addresses PNT using alternative signals and sensors and integrated PNT technologies for consumer and commercial applications. It looks at PNT using various radio signals-of-opportunity, atomic clock, optical, laser, magnetic field, celestial, MEMS and inertial sensors, as well as the concept of navigation from Low-Earth Orbiting (LEO) satellites. GNSS-INS integration, neuroscience of navigation, and animal navigation are also covered. The volume finishes off with a collection of work on contemporary PNT applications such as survey and mobile mapping, precision agriculture, wearable systems, automated driving, train control, commercial unmanned aircraft systems, aviation, and navigation in the unique Arctic environment. In addition, this text: Serves as a complete reference and handbook for professionals and students interested in the broad range of PNT subjects Includes chapters that focus on the latest developments in GNSS and other navigation sensors, techniques, and applications Illustrates interconnecting relationships between various types of technologies in order to assure more protected, tough, and accurate PNT Position, Navigation, and Timing Technologies in the 21st Century: Integrated Satellite Navigation, Sensor Systems, and Civil Applications will appeal to all industry professionals, researchers, and academics involved with the science, engineering, and applications of position, navigation, and timing technologies. pnt21book.com
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1992 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Trends in Research on Steel Aluminium and Composite Structures written by Marian A. Giżejowski and published by Routledge. This book was released on 2021-06-20 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Trends in Research on Steel, Aluminium and Composite Structures includes papers presented at the 14th International Conference on Metal Structures 2021 (ICMS 2021, Poznań, Poland, 16-18 June 2021). The 14th ICMS summarised a few years’ theoretical, numerical and experimental research on steel, aluminium and composite structures, and presented new concepts. This book contains six plenary lectures and all the individual papers presented during the Conference. Seven plenary lectures were presented at the Conference, including "Research developments on glass structures under extreme loads", Parhp3D – The parallel MPI/openMPI implementation of the 3D hp-adaptive FE code", "Design of beam-to-column steel-concrete composite joints: from Eurocodes and beyond", "Stainless steel structures – research, codification and practice", "Testing, modelling and design of bolted joints – effect of size, structural properties, integrity and robustness", "Design of hybrid beam-to-column joints between RHS tubular columns and I-section beams" and "Selected aspects of designing the cold-formed steel structures". The individual contributions delivered by authors covered a wide variety of topics: – Advanced analysis and direct methods of design, – Cold-formed elements and structures, – Composite structures, – Engineering structures, – Joints and connections, – Structural stability and integrity, – Structural steel, metallurgy, durability and behaviour in fire. Modern Trends in Research on Steel, Aluminium and Composite Structures is a useful reference source for academic researchers, graduate students as well as designers and fabricators.
