Download or read book Disturbance Observer Based Control written by Shihua Li and published by CRC Press. This book was released on 2016-04-19 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its abilities to compensate disturbances and uncertainties, disturbance observer based control (DOBC) is regarded as one of the most promising approaches for disturbance-attenuation. One of the first books on DOBC, Disturbance Observer Based Control: Methods and Applications presents novel theory results as well as best practices for applica
Download or read book Disturbance Observer Based Control written by Shihua Li and published by CRC Press. This book was released on 2014-02-21 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its abilities to compensate disturbances and uncertainties, disturbance observer based control (DOBC) is regarded as one of the most promising approaches for disturbance-attenuation. One of the first books on DOBC, Disturbance Observer Based Control: Methods and Applications presents novel theory results as well as best practices for applications in motion and process control that have already benefited numerous organizations. Supplying authoritative guidance in the areas of disturbance estimation and compensation for practical engineering systems, the book includes coverage of theoretic methods and practical applications of disturbance estimation and compensation for control systems through a DOBC approach. It considers applications in flight control systems, motion control systems, and process control systems. Supplies an authoritative overview of disturbance observer based control approaches Reports on recent developments in disturbance estimation techniques Considers matched and mismatched disturbance/uncertainty attenuation for DOBC Illustrates applications of the methods covered with detailed engineering case studies Filled with valuable insights gathered over decades of research by the authors, this book provides time- and stress-saving guidance for anyone interested in the theory and method research of DOBC. Using typical engineering examples, the text provides readers with an understanding of recent developments in DOBC as well as the tools required to make the most of this promising approach to disturbance-attenuation.
Download or read book Disturbance Observer Based Control written by Shihua Li and published by CRC Press. This book was released on 2017-10-12 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its abilities to compensate disturbances and uncertainties, disturbance observer based control(DOBC)is regarded as one of the most promising approaches for disturbance-attenuation. One of the first books on DOBC, Disturbance Observer Based Control: Methods and Applications presents novel theory results as well as best practices for applications in motion and process control that have already benefited numerous organizations. Supplying authoritative guidance in the areas of disturbance estimation and compensation for practical engineering systems, the book includes coverage of theoretic methods and practical applications of disturbance estimation and compensation for control systems through a DOBC approach. It considers applications in flight control systems, motion control systems, and process control systems. Supplies an authoritative overview of disturbance observer based control approaches Reports on recent developments in disturbance estimation techniques Considers matched and mismatched disturbance/uncertainty attenuation for DOBC Illustrates applications of the methods covered with detailed engineering case studies Filled with valuable insights gathered over decades of research by the authors, this book provides time- and stress-saving guidance for anyone interested in the theory and method research of DOBC. Using typical engineering examples, the text provides readers with an understanding of recent developments in DOBC as well as the tools required to make the most of this promising approach to disturbance-attenuation.
Download or read book Control of Integral Processes with Dead Time written by Antonio Visioli and published by Springer Science & Business Media. This book was released on 2010-11-18 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Integral Processes with Dead Time provides a unified and coherent review of the various approaches devised for the control of integral processes, addressing the problem from different standpoints. In particular, the book treats the following topics: How to tune a PID controller and assess its performance; How to design a two-degree-of-freedom control scheme in order to deal with both the set-point following and load disturbance rejection tasks; How to modify the basic Smith predictor control scheme in order to cope with the presence of an integrator in the process; and how to address the presence of large process dead times. The methods are presented sequentially, highlighting the evolution of their rationale and implementation and thus clearly characterising them from both academic and industrial perspectives.
Download or read book PID Control System Design and Automatic Tuning using MATLAB Simulink written by Liuping Wang and published by John Wiley & Sons. This book was released on 2020-04-20 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers PID control systems from the very basics to the advanced topics This book covers the design, implementation and automatic tuning of PID control systems with operational constraints. It provides students, researchers, and industrial practitioners with everything they need to know about PID control systems—from classical tuning rules and model-based design to constraints, automatic tuning, cascade control, and gain scheduled control. PID Control System Design and Automatic Tuning using MATLAB/Simulink introduces PID control system structures, sensitivity analysis, PID control design, implementation with constraints, disturbance observer-based PID control, gain scheduled PID control systems, cascade PID control systems, PID control design for complex systems, automatic tuning and applications of PID control to unmanned aerial vehicles. It also presents resonant control systems relevant to many engineering applications. The implementation of PID control and resonant control highlights how to deal with operational constraints. Provides unique coverage of PID Control of unmanned aerial vehicles (UAVs), including mathematical models of multi-rotor UAVs, control strategies of UAVs, and automatic tuning of PID controllers for UAVs Provides detailed descriptions of automatic tuning of PID control systems, including relay feedback control systems, frequency response estimation, Monte-Carlo simulation studies, PID controller design using frequency domain information, and MATLAB/Simulink simulation and implementation programs for automatic tuning Includes 15 MATLAB/Simulink tutorials, in a step-by-step manner, to illustrate the design, simulation, implementation and automatic tuning of PID control systems Assists lecturers, teaching assistants, students, and other readers to learn PID control with constraints and apply the control theory to various areas. Accompanying website includes lecture slides and MATLAB/ Simulink programs PID Control System Design and Automatic Tuning using MATLAB/Simulink is intended for undergraduate electrical, chemical, mechanical, and aerospace engineering students, and will greatly benefit postgraduate students, researchers, and industrial personnel who work with control systems and their applications.
Download or read book Active Disturbance Rejection Control for Nonlinear Systems written by Bao-Zhu Guo and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise, in-depth introduction to active disturbance rejection control theory for nonlinear systems, with numerical simulations and clearly worked out equations Provides the fundamental, theoretical foundation for applications of active disturbance rejection control Features numerical simulations and clearly worked out equations Highlights the advantages of active disturbance rejection control, including small overshooting, fast convergence, and energy savings
Download or read book Anti Disturbance Control for Systems with Multiple Disturbances written by Lei Guo and published by CRC Press. This book was released on 2018-10-08 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main focus of this monograph will be on the Enhanced Anti-Disturbance Control and filtering theory and their applications. In fact, the classical anti-disturbance control theory only considered one "equivalent" disturbance which is merged by different unknown sources. However, it is noted that along with the development of information obtaining and processing technologies, one can get more information or knowledge about various types of disturbances.
Download or read book High Gain Observers in Nonlinear Feedback Control written by Hassan H. Khalil and published by SIAM. This book was released on 2017-06-23 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: For over a quarter of a century, high-gain observers have been used extensively in the design of output feedback control of nonlinear systems. This book presents a clear, unified treatment of the theory of high-gain observers and their use in feedback control. Also provided is a discussion of the separation principle for nonlinear systems; this differs from other separation results in the literature in that recovery of stability as well as performance of state feedback controllers is given. The author provides a detailed discussion of applications of high-gain observers to adaptive control and regulation problems and recent results on the extended high-gain observers. In addition, the author addresses two challenges that face the implementation of high-gain observers: high dimension and measurement noise. Low-power observers are presented for high-dimensional systems. The effect of measurement noise is characterized and techniques to reduce that effect are presented. The book ends with discussion of digital implementation of the observers. Readers will find comprehensive coverage of the main results on high-gain observers; rigorous, self-contained proofs of all results; and numerous examples that illustrate and provide motivation for the results. The book is intended for engineers and applied mathematicians who design or research feedback control systems.
Download or read book Sliding Mode Control and Observation written by Yuri Shtessel and published by Springer Science & Business Media. This book was released on 2013-06-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sliding mode control methodology has proven effective in dealing with complex dynamical systems affected by disturbances, uncertainties and unmodeled dynamics. Robust control technology based on this methodology has been applied to many real-world problems, especially in the areas of aerospace control, electric power systems, electromechanical systems, and robotics. Sliding Mode Control and Observation represents the first textbook that starts with classical sliding mode control techniques and progresses toward newly developed higher-order sliding mode control and observation algorithms and their applications. The present volume addresses a range of sliding mode control issues, including: *Conventional sliding mode controller and observer design *Second-order sliding mode controllers and differentiators *Frequency domain analysis of conventional and second-order sliding mode controllers *Higher-order sliding mode controllers and differentiators *Higher-order sliding mode observers *Sliding mode disturbance observer based control *Numerous applications, including reusable launch vehicle and satellite formation control, blood glucose regulation, and car steering control are used as case studies Sliding Mode Control and Observation is aimed at graduate students with a basic knowledge of classical control theory and some knowledge of state-space methods and nonlinear systems, while being of interest to a wider audience of graduate students in electrical/mechanical/aerospace engineering and applied mathematics, as well as researchers in electrical, computer, chemical, civil, mechanical, aeronautical, and industrial engineering, applied mathematicians, control engineers, and physicists. Sliding Mode Control and Observation provides the necessary tools for graduate students, researchers and engineers to robustly control complex and uncertain nonlinear dynamical systems. Exercises provided at the end of each chapter make this an ideal text for an advanced course taught in control theory.
Download or read book 2020 3rd International Conference on Energy Power and Environment Towards Clean Energy Technologies written by IEEE Staff and published by . This book was released on 2021-03-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference is proposed with a basic theme Towards Clean Energy Technologies ICEPE 2020 will provide an opportunity to the practicing engineers, academicians and researchers to meet in a common forum to discuss various issues and its future direction in the field of clean energy technologies There are various tracks in the conference, which mainly focuses on the Energy, Power and Environment The conference aims to put together the experts from the relevant research domains to share their knowledge and ideas with a direction towards future research scope
Download or read book Feedback Systems written by Karl Johan Åström and published by Princeton University Press. This book was released on 2021-02-02 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to the principles and applications of feedback systems—now fully revised and expanded This textbook covers the mathematics needed to model, analyze, and design feedback systems. Now more user-friendly than ever, this revised and expanded edition of Feedback Systems is a one-volume resource for students and researchers in mathematics and engineering. It has applications across a range of disciplines that utilize feedback in physical, biological, information, and economic systems. Karl Åström and Richard Murray use techniques from physics, computer science, and operations research to introduce control-oriented modeling. They begin with state space tools for analysis and design, including stability of solutions, Lyapunov functions, reachability, state feedback observability, and estimators. The matrix exponential plays a central role in the analysis of linear control systems, allowing a concise development of many of the key concepts for this class of models. Åström and Murray then develop and explain tools in the frequency domain, including transfer functions, Nyquist analysis, PID control, frequency domain design, and robustness. Features a new chapter on design principles and tools, illustrating the types of problems that can be solved using feedback Includes a new chapter on fundamental limits and new material on the Routh-Hurwitz criterion and root locus plots Provides exercises at the end of every chapter Comes with an electronic solutions manual An ideal textbook for undergraduate and graduate students Indispensable for researchers seeking a self-contained resource on control theory
Download or read book Underwater Robots written by Gianluca Antonelli and published by Springer. This book was released on 2013-11-21 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the state of the art in underwater robotics experiments of dynamic control of an underwater vehicle. The author presents experimental results on motion control and fault tolerance to thrusters’ faults with the autonomous vehicle ODIN. This second substantially improved and expanded edition new features are presented dealing with fault-tolerant control and coordinated control of autonomous underwater vehicles.
Download or read book Design of Observer based Compensators written by Peter Hippe and published by Springer Science & Business Media. This book was released on 2009-05-14 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Observer-based Compensators facilitates and adds transparency to design in the frequency domain which is not as well-established among control engineers as time domain design. The presentation of the design procedures starts with a review of the time domain results; therefore, the book also provides quick access to state space methods for control system design. Frequency domain design of observer-based compensators of all orders is covered. The design of decoupling and disturbance rejecting controllers is presented, and solutions are given to the linear quadratic and the model matching problems. The pole assignment design is facilitated by a new parametric approach in the frequency domain. Anti-windup control is also investigated in the framework of the polynomial approach. The discrete-time results for disturbance rejection and linear quadratic control are also presented. The book contains worked examples that can easily be reproduced by the reader, and the results are illustrated by simulations.
Download or read book Quasilinear Control written by ShiNung Ching and published by Cambridge University Press. This book was released on 2010-12-06 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook and reference for readers interested in quasilinear control (QLC). QLC is a set of methods for performance analysis and design of linear plant or nonlinear instrumentation (LPNI) systems. The approach of QLC is based on the method of stochastic linearization, which reduces the nonlinearities of actuators and sensors to quasilinear gains. Unlike the usual - Jacobian linearization - stochastic linearization is global. Using this approximation, QLC extends most of the linear control theory techniques to LPNI systems. A bisection algorithm for solving these equations is provided. In addition, QLC includes new problems, specific for the LPNI scenario. Examples include Instrumented LQR/LQG, in which the controller is designed simultaneously with the actuator and sensor, and partial and complete performance recovery, in which the degradation of linear performance is either contained by selecting the right instrumentation or completely eliminated by the controller boosting.
Download or read book Linear Feedback Control written by Dingyu Xue and published by SIAM. This book was released on 2007-01-01 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses analysis and design techniques for linear feedback control systems using MATLAB® software. By reducing the mathematics, increasing MATLAB working examples, and inserting short scripts and plots within the text, the authors have created a resource suitable for almost any type of user. The book begins with a summary of the properties of linear systems and addresses modeling and model reduction issues. In the subsequent chapters on analysis, the authors introduce time domain, complex plane, and frequency domain techniques. Their coverage of design includes discussions on model-based controller designs, PID controllers, and robust control designs. A unique aspect of the book is its inclusion of a chapter on fractional-order controllers, which are useful in control engineering practice.
Download or read book Vehicle Manipulator Systems written by Pål Johan From and published by Springer Science & Business Media. This book was released on 2013-10-02 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Furthering the aim of reducing human exposure to hazardous environments, this monograph presents a detailed study of the modeling and control of vehicle-manipulator systems. The text shows how complex interactions can be performed at remote locations using systems that combine the manipulability of robotic manipulators with the ability of mobile robots to locomote over large areas. The first part studies the kinematics and dynamics of rigid bodies and standard robotic manipulators and can be used as an introduction to robotics focussing on robust mathematical modeling. The monograph then moves on to study vehicle-manipulator systems in great detail with emphasis on combining two different configuration spaces in a mathematically sound way. Robustness of these systems is extremely important and Modeling and Control of Vehicle-manipulator Systems effectively represents the dynamic equations using a mathematically robust framework. Several tools from Lie theory and differential geometry are used to obtain globally valid representations of the dynamic equations of vehicle-manipulator systems. The specific characteristics of several different types of vehicle-manipulator systems are included and the various application areas of these systems are discussed in detail. For underwater robots buoyancy and gravity, drag forces, added mass properties, and ocean currents are considered. For space robotics the effects of free fall environments and the strong dynamic coupling between the spacecraft and the manipulator are discussed. For wheeled robots wheel kinematics and non-holonomic motion is treated, and finally the inertial forces are included for robots mounted on a forced moving base. Modeling and Control of Vehicle-manipulator Systems will be of interest to researchers and engineers studying and working on many applications of robotics: underwater, space, personal assistance, and mobile manipulation in general, all of which have similarities in the equations required for modeling and control.
Download or read book Techniques of Model based Control written by Coleman Brosilow and published by Prentice Hall Professional. This book was released on 2002 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation In this book, two of the field's leading experts bring together powerful advances in model-based control for chemical process engineering. From start to finish, Coleman Brosilow and Babu Joseph introduce practical approaches designed to solve real-world problems -- not just theory. The book contains extensive examples and exercises, and an accompanying CD-ROM contains hands-on MATLAB files that supplement the examples and help readers solve the exercises -- a feature found in no other book on the topic.
