Download or read book District Energy System Design written by Christian Inard and published by MDPI. This book was released on 2020-12-29 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The articles presented in this Special Issue cover different aspects of the urban planning process, such as simulation, optimization or decision-making. The authors highlighted the importance of performing an integrated design of the district, considering different sectors, different energy vectors and different operation modes. In order to better integrate renewable and residual energy sources (R²ES), careful design of systems and storage solutions should be performed. Different storage solutions were tested, ranging from large-scale thermal energy storage to vehicle batteries or the thermal mass of buildings. Van der Heijde et al. (2019) proposed a two-layer design optimization algorithm to design a district heating network with solar thermal collectors, seasonal thermal energy storage and excess heat injection. Pajot et al. (2019) also performed an optimization of the sizing and control of energy systems in a district equipped with heat pumps, with thermal energy storage or thermal mass utilization. A hybrid distribution system, coupling the thermal and electrical networks, was proposed by Widl et al. (2019). Arnaudo et al. (2019) used the vehicle-to-grid (V2G) concept to decrease the overloading of the electrical distribution network during heat pump operation. Finally, Kazmi et al. (2019) proposed an integrated decision-making planning approach for a better integration of R²ES in the distribution network. The complexity of urban planning leads to the development of new tools and methodologies. Until now, operation was poorly integrated in the design phase. New urban building energy modeling tools were proposed by the different authors. These tools are either based on co-simulations or integrated solutions to be able to capture the fine dynamics of a district. The difficulty of generating the input data for the models was also discussed. Regarding the methodology, most articles proposed a two-stage optimization procedure to optimize both the operational and design aspects. Mixed-integer linear programming (MILP) and genetic algorithms were often used to find optimal solutions.
Download or read book Optimal Design of Piping Systems for District Heating written by and published by DIANE Publishing. This book was released on with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book District Heating and Cooling Networks in the European Union written by Antonio Colmenar-Santos and published by Springer. This book was released on 2017-07-18 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book evaluates the potential of the combined use of district heating networks and cogeneration in the European Union (EU). It also proposes measures to remove barriers hindering their widespread implementation, formulates policies for their implementation, and evaluates their economic, energy, and environmental consequences. The book presents a preliminary assessment of the likely cost and the impact of widespread adoption of district heating networks and cogeneration carried out in three cities that represent the variety of climatic conditions in the EU. Based on this assessment, it is estimated that by undertaking the maximum economically feasible implementation across the EU, fuel savings of €95M/year would be achieved, representing energy savings of 6,400 petajoules (PJ), which is around 15% of the total final energy consumption in the EU in 2013 (46,214.5 PJ). Using simple and quick calculations and not specific software, the method used allows the evaluation of the potential benefits of retrofitting existing power plants into cogeneration plants and connecting them to nearby heating networks. In light of increasing energy costs and environmental concerns, the book is of interest to heating engineers, city planners, and policy-makers around the globe.
Download or read book District Cooling Guide written by and published by Ashrae. This book was released on 2013 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The District Cooling Guide provides design guidance for all major aspects of district cooling systems, including central chiller plants, chilled-water distribution systems, and consumer interconnection. It draws on the expertise of an extremely diverse international team with current involvement in the industry and hundreds of years of combined experience.
Download or read book Comprehensive Energy Systems written by Ibrahim Dincer and published by Elsevier. This book was released on 2018-02-07 with total page 5543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Energy Systems, Seven Volume Set provides a unified source of information covering the entire spectrum of energy, one of the most significant issues humanity has to face. This comprehensive book describes traditional and novel energy systems, from single generation to multi-generation, also covering theory and applications. In addition, it also presents high-level coverage on energy policies, strategies, environmental impacts and sustainable development. No other published work covers such breadth of topics in similar depth. High-level sections include Energy Fundamentals, Energy Materials, Energy Production, Energy Conversion, and Energy Management. Offers the most comprehensive resource available on the topic of energy systems Presents an authoritative resource authored and edited by leading experts in the field Consolidates information currently scattered in publications from different research fields (engineering as well as physics, chemistry, environmental sciences and economics), thus ensuring a common standard and language
Download or read book A Handbook on Low Energy Buildings and District Energy Systems written by L.D. Danny Harvey and published by Routledge. This book was released on 2012-08-21 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of Choice Magazine - Outstanding Academic Titles for 2007 Buildings account for over one third of global energy use and associated greenhouse gas emissions worldwide. Reducing energy use by buildings is therefore an essential part of any strategy to reduce greenhouse gas emissions, and thereby lessen the likelihood of potentially catastrophic climate change. Bringing together a wealth of hard-to-obtain information on energy use and energy efficiency in buildings at a level which can be easily digested and applied, Danny Harvey offers a comprehensive, objective and critical sourcebook on low-energy buildings. Topics covered include: thermal envelopes, heating, cooling, heat pumps, HVAC systems, hot water, lighting, solar energy, appliances and office equipment, embodied energy, buildings as systems and community-integrated energy systems (cogeneration, district heating, and district cooling). The book includes exemplary buildings and techniques from North America, Europe and Asia, and combines a broad, holistic perspective with technical detail in an accessible and insightful manner.
Download or read book District Heating Guide written by American Society of Heating, Refrigerating and Air-Conditioning Engineers and published by Ashrae. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Guidance for district heating system planning, design, operation, and maintenance for inexperienced designers and complete reference for those immersed in district heating industry; includes terminology for district heating"--
Download or read book District Energy in Cities written by United Nations Publications and published by UN. This book was released on 2017-03-29 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report identifies modern district energy as the most effective approach for many cities to transition to sustainable heating and cooling, by improving energy efficiency and enabling higher shares of renewables. This publication is one of the first reports to provide concrete policy, finance and technology best-practice recommendations on addressing the heating and cooling sectors in cities through energy efficiency improvements and the integration of renewables, both of which are central to the energy transition. These recommendations have been developed in collaboration with 45 champion cities, all of which use district energy, with 11 of them using it to achieve 100 per cent renewables or carbon-neutral targets.
Download or read book District Energy System Design written by Christian Inard and published by . This book was released on 2020 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The articles presented in this Special Issue cover different aspects of the urban planning process, such as simulation, optimization or decision-making. The authors highlighted the importance of performing an integrated design of the district, considering different sectors, different energy vectors and different operation modes. In order to better integrate renewable and residual energy sources (R2ES), careful design of systems and storage solutions should be performed. Different storage solutions were tested, ranging from large-scale thermal energy storage to vehicle batteries or the thermal mass of buildings. Van der Heijde et al. (2019) proposed a two-layer design optimization algorithm to design a district heating network with solar thermal collectors, seasonal thermal energy storage and excess heat injection. Pajot et al. (2019) also performed an optimization of the sizing and control of energy systems in a district equipped with heat pumps, with thermal energy storage or thermal mass utilization. A hybrid distribution system, coupling the thermal and electrical networks, was proposed by Widl et al. (2019). Arnaudo et al. (2019) used the vehicle-to-grid (V2G) concept to decrease the overloading of the electrical distribution network during heat pump operation. Finally, Kazmi et al. (2019) proposed an integrated decision-making planning approach for a better integration of R2ES in the distribution network. The complexity of urban planning leads to the development of new tools and methodologies. Until now, operation was poorly integrated in the design phase. New urban building energy modeling tools were proposed by the different authors. These tools are either based on co-simulations or integrated solutions to be able to capture the fine dynamics of a district. The difficulty of generating the input data for the models was also discussed. Regarding the methodology, most articles proposed a two-stage optimization procedure to optimize both the operational and design aspects. Mixed-integer linear programming (MILP) and genetic algorithms were often used to find optimal solutions.
Download or read book Geothermal Energy Systems written by Ibrahim Dincer and published by Elsevier. This book was released on 2021-03-25 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Energy Systems provides design and analysis methodologies by using exergy and enhanced exergy tools (covering exergoenvironmental, exergoeconomic, exergetic life cycle assessment, etc.), environmental impact assessment models, and sustainability models and approaches. In addition to presenting newly developed advanced and integrated systems for multigenerational purposes, the book discusses newly developed environmental impact assessment and sustainability evaluation methods and methodologies. With case studies for integrated geothermal energy sources for multigenerational aims, engineers can design and develop new geothermal integrated systems for various applications and discover the main advantages of design choices, system analysis, assessment and development of advanced geothermal power systems. Explains the ability of geothermal energy power systems to decrease global warming Discusses sustainable development strategies for using geothermal energy sources Provides new design conditions for geothermal energy sources-based district energy systems
Download or read book Energy Systems Engineering written by and published by John Wiley & Sons. This book was released on 2008-10-13 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inspired by the leading authority in the field, the Centre for Process Systems Engineering at Imperial College London, this book includes theoretical developments, algorithms, methodologies and tools in process systems engineering and applications from the chemical, energy, molecular, biomedical and other areas. It spans a whole range of length scales seen in manufacturing industries, from molecular and nanoscale phenomena to enterprise-wide optimization and control. As such, this will appeal to a broad readership, since the topic applies not only to all technical processes but also due to the interdisciplinary expertise required to solve the challenge. The ultimate reference work for years to come.
Download or read book Innovations and Challenges of the Energy Transition in Smart City Districts written by Sven Leonhardt and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-12-31 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das Energiekonzept und die Beschlüsse der Bundesregierung zur Energiewende sind wichtige Weichenstellungen für die Gestaltung des zukünftigen Energiesystems. So soll u. a. die Energieeffizienz in dem Maße gesteigert werden, dass bis zum Jahr 2050 nur noch die Hälfte des Primärenergieverbrauchs im Vergleich zum Jahr 2008 benötigt wird. In Deutschland leben rund 75 % der Menschen in Städten. Daher sind Städte und Agglomerationen besondere Lebens-, Wirtschafts- und Kulturräume. Als solche verlangen sie nach einem zukunftsfähigen Energiesystem und müssen in hohem Maße energieeffizient ausgestaltet sein. Besonders relevant für die Steigerung der Energieeffizienz ist der Gebäudesektor: In den Wohn- und Nichtwohngebäuden bundesweit entstehen rund 35 % des Endenergieverbrauchs, etwa drei Viertel davon in Form von Wärme. Die von der Bundesregierung beschlossene Energiewende, also der Umbau der deutschen Energieversorgung auf Basis hoher Effizienz und mit weitgehender Nutzung erneuerbarer Energien, kann deshalb nur gelingen, wenn diese Wende nicht nur im Strom-, sondern auch im Wärmemarkt umgesetzt wird (sogenannte "Wärmewende"). Mit Blick auf das energie- und klimapolitische Ziel eines nahezu klimaneutralen Gebäudebestands bis zum Jahr 2050 sind neben einer gesteigerten Energieeffizienz die erneuerbaren Energien in weit größerem Maße in den Wärmesektor zu integrieren. Städte und Agglomerationen bieten aufgrund der großen Hebelwirkung die Möglichkeit, technologische und gesellschaftliche Innovationen ungleich schneller und wirksamer in die Praxis umzusetzen und damit die energiepolitischen Ziele der Bundesregierung zu erfüllen.
Download or read book A Power Plant Primer for District Energy Systems written by Randal W. Collins and published by Lulu.com. This book was released on 2015-12-04 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an introduction to Central Utility Systems concepts, theories, components and some operations practices. In addition to introducing plant operators to the very basic level of knowledge needed to understand the plant, the best fit for this book may be for those who have some duties in and around the plant and could benefit from some of the basic terms and definitions supplied here. The book focuses on District Energy Systems, but applies to virtually any boiler or steam plant and the systems they use to operate safely and efficiently. The strongest value that this book will bring is a common language as every reader will have the ability to understand the terms and phrases used in and about the plant.
Download or read book District Heating Handbook written by and published by . This book was released on 1983 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Role of Mathematical Modeling in Advanced Power Generation Systems written by Arijit Ganguli and published by Frontiers Media SA. This book was released on 2023-11-13 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy demands throughout the globe has been increasing and the detrimental effects of carbon emissions on the environment by use of non-renewable resources has impacted life on the planet. The changing climate has caused an increase in natural calamities all over the globe. Many countries in the world have started to produce power using renewable resources like solar, biomass, wind energy, nuclear energy and green fuels. Though there are several technologies for power generation using the above sources, efficient design of these systems still needs lot of research. Mathematical modeling would play a vital role in design of state of the art technologies. Advanced nuclear power plants need special mention since they involve naturally driven safety systems where the complex phenomena of boiling, condensation and thermal stratification take place. These are difficult to model as there is more than one phase coupled with turbulence models, near wall phenomena, coalescence and break up, etc. Scaling up of such systems and their innovative design to reduce stratification requires the help of mathematical modeling. Other opportunities include Computational Fluid Dynamics (CFD) modeling for design of wind turbines for power generation using wind energy. Power generation from biomass involves use of gasifiers which has complex set of reactions and mostly two or three phases which are difficult to model using CFD at industrial scales.
Download or read book Process Systems Engineering written by Edwin Zondervan and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-10-03 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process systems engineering (PSE) is a discipline that delivers tools for guided decision-making in the development of new processes and products. Proven successful in the pharmaceutical-, food- and water sectors, it has also breached the field of energy systems. The future energy systems aim to be more efficient, cost-effective, environmentally benign, and interconnected. The design and operation is extremely challenging for decision-makers, engineers, and scientists and here lies a crucial role for the process systems engineer.
Download or read book Expanding Boundaries Systems Thinking in the Built Environment written by Guillaume Habert and published by vdf Hochschulverlag AG. This book was released on 2016-08-15 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Consuming over 40% of total primary energy, the built environment is in the centre of worldwide strategies and measures towards a more sustainable future. To provide resilient solutions, a simple optimisation of individual technologies will not be sufficient. In contrast, whole system thinking reveals and exploits connections between parts. Each system interacts with others on different scales (materials, components, buildings, cities) and domains (ecology, economy and social). Whole-system designers optimize the performance of such systems by understanding interconnections and identifying synergies. The more complete the design integration, the better the result. In this book, the reader will find the proceedings of the 2016 Sustainable Built Environment (SBE) Regional Conference in Zurich. Papers have been written by academics and practitioners from all continents to bring forth the latest understanding on systems thinking in the built environment.
