Download or read book Distribution System Modeling and Analysis with MATLAB and WindMil written by William H. Kersting and published by CRC Press. This book was released on 2022-08-19 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Fifth Edition includes new sections on electric vehicle loads and the impact they have on voltage drop and transformers in distribution systems. A new and improved tape-shield cable model has been developed to produce more accurate impedance modeling of underground cables. In addition, the book uses state-of-the-art software, including the power distribution simulation software Milsoft WindMil® and programming language Mathworks MATLAB®. MATLAB scripts have been developed for all examples in the text, in addition to new MATLAB-based problems at the end of the chapters. This book illustrates methods that ensure the most accurate results in computational modeling for electric power distribution systems. It clearly explains the principles and mathematics behind system models and discusses the smart grid concept and its special benefits. Including numerous models of components and several practical examples, the chapters demonstrate how engineers can apply and customize computer programs to help them plan and operate systems. The book also covers approximation methods to help users interpret computer program results and includes references and assignments that help users apply MATLAB and WindMil programs to put their new learning into practice.

Download or read book Distribution System Modeling and Analysis with MATLAB and WindMil written by William H. Kersting and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fifth edition of the book includes new sections on electric vehicle loads and the impact they have on voltage drop and transformers in distribution systems. A new and improved tape-shield cable model has been developed to produce more accurate impedance modeling of underground cables. Includes new sections on electrical vehicle loads and their impact on distribution systems New and improved tape shield model which produces model accurate modelling of underground cables Explains how to compute power losses on the phase, neutral, and ground conductors as well as power losses in equipment Applies the commercial analysis program, WindMil, to the study of IEEE test feeders. Includes feeder design problems at the end of chapters.

Download or read book Distribution System Modeling and Analysis written by William H. Kersting and published by CRC Press. This book was released on 2017-08-24 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest edition includes new sections on grounded wye–delta short circuit feedback current and simulation of loop flow. The text illustrates methods that ensure the most accurate results in computational modeling for electric power distribution systems. It clearly explains the principles and mathematics behind system models and discusses the "smart grid" concept and its special benefits. Including numerous models of components and several practical examples, the chapters demonstrate how engineers can apply and customize computer programs to help them plan and operate systems. The book also covers approximation methods to help users interpret computer program results, and includes references and assignments that help users apply Mathcad and WindMil programs to put their new learning into practice.

Download or read book Distribution System Modeling and Analysis Third Edition written by William H. Kersting and published by CRC Press. This book was released on 2012-01-24 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to reflect the latest changes and advances in the field, Distribution System Modeling and Analysis, Third Edition again illustrates methods that will ensure the most accurate possible results in computational modeling for electric power distribution systems. With the same simplified approach of previous editions, this book clearly explains the principles and mathematics behind system models, also discussing the "smart grid" concept and its special benefits. However, this volume adds a crucial element not found in previous editions. The first two books developed models for all components but focused less on how to actually implement those models on a computer for planning and for real-time analysis. This book includes numerous models of components and several practical examples, to demonstrate how engineers can apply and customize computer programs to help them plan and operate systems. It also covers approximation methods to help users interpret computer program feedback, so they recognize when a result is not what it should be. Another improvement is the book’s earlier introduction (in chapter 4) of the modified ladder iterative technique. The author explains the need for this method—which is used in most distribution analysis programs—detailing how it is applied and why it is among the most powerful options. Concluding with a detailed summary of presented topics that readers have come to expect, this edition provides useful problems, references, and assignments that help users apply Mathcad® and WIndmil programs to put their new learning into practice. An invaluable tool for engineering students and professionals worldwide, this book explores cutting-edge advances in modeling, simulation, and analysis of distribution systems that can ensure the continued dispersal of safe, reliable energy. Watch William H. Kerstig talk about his book at: http://www.youtube.com/watch?v=qmlDiH1ntuE

Download or read book Solutions Manual for Distribution System Modeling and Analysis Se written by Kersting William H Staff and published by CRC Press. This book was released on 2006-11 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Distribution System Modeling and Analysis written by William H. Kersting and published by CRC Press. This book was released on 2001-08-31 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: For decades, distribution engineers did not have the sophisticated tools developed for analyzing transmission systems-often they had only their instincts. Things have changed, and we now have computer programs that allow engineers to simulate, analyze, and optimize distribution systems. Powerful as these programs are, however, without a real unders

Download or read book Solutions Manual for Distribution System Modeling and Analysis written by William H. Kersting and published by CRC Press. This book was released on 2002-12 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solution s Manual Distribution System Modeling and Analysis written by Taylor & Francis Group and published by . This book was released on 2011-11-30 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Distribution Systems with PSCAD Analysis written by Atousa Yazdani and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "With the new advancements in distribution systems, such as the integration of renewable energy and bidirectional energy flow, it is necessary to equip power system engineers and students with better tools and understanding of how to study and analyze various phenomenon in distribution system. This book includes sections that address new advancements in distribution systems by discussing possible impacts associated with active distribution systems. It provides a foundational knowledge of the parts and equipment that make up a distribution grid, how they work, and how they are designed, maintained, and protected. The book highlights experimental modeling and analysis examples, which can be carried out by utilizing the software, PSCAD. It aims to introduce and familiarize the reader with how to use analytical tools and understand the engineering problems related to distribution system."--Provided by publisher.

Download or read book Advances in Smart System Technologies written by P. Suresh and published by Springer Nature. This book was released on 2020-08-29 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer-reviewed proceedings of the International Conference on Frontiers in Smart Systems Technologies (ICFSST 2019). It focuses on latest research and cutting-edge technologies in smart systems and intelligent autonomous systems with advanced functionality. Comprising topics related to diverse aspects of smart technologies such as high security, reliability, miniaturization, energy consumption, and intelligent data processing, the book contains contributions from academics as well as industry. Given the range of the topics covered, this book will prove useful for students, researchers, and professionals alike.

Download or read book Modeling and Simulation of Systems Using MATLAB and Simulink written by Devendra K. Chaturvedi and published by CRC Press. This book was released on 2017-12-19 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Not only do modeling and simulation help provide a better understanding of how real-world systems function, they also enable us to predict system behavior before a system is actually built and analyze systems accurately under varying operating conditions. Modeling and Simulation of Systems Using MATLAB® and Simulink® provides comprehensive, state-of-the-art coverage of all the important aspects of modeling and simulating both physical and conceptual systems. Various real-life examples show how simulation plays a key role in understanding real-world systems. The author also explains how to effectively use MATLAB and Simulink software to successfully apply the modeling and simulation techniques presented. After introducing the underlying philosophy of systems, the book offers step-by-step procedures for modeling different types of systems using modeling techniques, such as the graph-theoretic approach, interpretive structural modeling, and system dynamics modeling. It then explores how simulation evolved from pre-computer days into the current science of today. The text also presents modern soft computing techniques, including artificial neural networks, fuzzy systems, and genetic algorithms, for modeling and simulating complex and nonlinear systems. The final chapter addresses discrete systems modeling. Preparing both undergraduate and graduate students for advanced modeling and simulation courses, this text helps them carry out effective simulation studies. In addition, graduate students should be able to comprehend and conduct simulation research after completing this book.

Download or read book Power System Modeling Computation and Control written by Joe H. Chow and published by John Wiley & Sons. This book was released on 2020-01-21 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides students with an understanding of the modeling and practice in power system stability analysis and control design, as well as the computational tools used by commercial vendors Bringing together wind, FACTS, HVDC, and several other modern elements, this book gives readers everything they need to know about power systems. It makes learning complex power system concepts, models, and dynamics simpler and more efficient while providing modern viewpoints of power system analysis. Power System Modeling, Computation, and Control provides students with a new and detailed analysis of voltage stability; a simple example illustrating the BCU method of transient stability analysis; and one of only a few derivations of the transient synchronous machine model. It offers a discussion on reactive power consumption of induction motors during start-up to illustrate the low-voltage phenomenon observed in urban load centers. Damping controller designs using power system stabilizer, HVDC systems, static var compensator, and thyristor-controlled series compensation are also examined. In addition, there are chapters covering flexible AC transmission Systems (FACTS)—including both thyristor and voltage-sourced converter technology—and wind turbine generation and modeling. Simplifies the learning of complex power system concepts, models, and dynamics Provides chapters on power flow solution, voltage stability, simulation methods, transient stability, small signal stability, synchronous machine models (steady-state and dynamic models), excitation systems, and power system stabilizer design Includes advanced analysis of voltage stability, voltage recovery during motor starts, FACTS and their operation, damping control design using various control equipment, wind turbine models, and control Contains numerous examples, tables, figures of block diagrams, MATLAB plots, and problems involving real systems Written by experienced educators whose previous books and papers are used extensively by the international scientific community Power System Modeling, Computation, and Control is an ideal textbook for graduate students of the subject, as well as for power system engineers and control design professionals.

Download or read book Wind Turbine Control and Monitoring written by Ningsu Luo and published by Springer. This book was released on 2014-08-30 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maximizing reader insights into the latest technical developments and trends involving wind turbine control and monitoring, fault diagnosis, and wind power systems, ‘Wind Turbine Control and Monitoring’ presents an accessible and straightforward introduction to wind turbines, but also includes an in-depth analysis incorporating illustrations, tables and examples on how to use wind turbine modeling and simulation software. Featuring analysis from leading experts and researchers in the field, the book provides new understanding, methodologies and algorithms of control and monitoring, computer tools for modeling and simulation, and advances the current state-of-the-art on wind turbine monitoring and fault diagnosis; power converter systems; and cooperative & fault-tolerant control systems for maximizing the wind power generation and reducing the maintenance cost. This book is primarily intended for researchers in the field of wind turbines, control, mechatronics and energy; postgraduates in the field of mechanical and electrical engineering; and graduate and senior undergraduate students in engineering wishing to expand their knowledge of wind energy systems. The book will also interest practicing engineers dealing with wind technology who will benefit from the comprehensive coverage of the theoretic control topics, the simplicity of the models and the use of commonly available control algorithms and monitoring techniques.

Download or read book Wind Energy Explained written by James F. Manwell and published by John Wiley & Sons. This book was released on 2010-09-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)

Download or read book Wind Power in Power Systems written by Thomas Ackermann and published by John Wiley & Sons. This book was released on 2012-04-23 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the highly acclaimed Wind Power in Power Systems has been thoroughly revised and expanded to reflect the latest challenges associated with increasing wind power penetration levels. Since its first release, practical experiences with high wind power penetration levels have significantly increased. This book presents an overview of the lessons learned in integrating wind power into power systems and provides an outlook of the relevant issues and solutions to allow even higher wind power penetration levels. This includes the development of standard wind turbine simulation models. This extensive update has 23 brand new chapters in cutting-edge areas including offshore wind farms and storage options, performance validation and certification for grid codes, and the provision of reactive power and voltage control from wind power plants. Key features: Offers an international perspective on integrating a high penetration of wind power into the power system, from basic network interconnection to industry deregulation; Outlines the methodology and results of European and North American large-scale grid integration studies; Extensive practical experience from wind power and power system experts and transmission systems operators in Germany, Denmark, Spain, UK, Ireland, USA, China and New Zealand; Presents various wind turbine designs from the electrical perspective and models for their simulation, and discusses industry standards and world-wide grid codes, along with power quality issues; Considers concepts to increase penetration of wind power in power systems, from wind turbine, power plant and power system redesign to smart grid and storage solutions. Carefully edited for a highly coherent structure, this work remains an essential reference for power system engineers, transmission and distribution network operator and planner, wind turbine designers, wind project developers and wind energy consultants dealing with the integration of wind power into the distribution or transmission network. Up-to-date and comprehensive, it is also useful for graduate students, researchers, regulation authorities, and policy makers who work in the area of wind power and need to understand the relevant power system integration issues.

Download or read book Control of Power Inverters in Renewable Energy and Smart Grid Integration written by Qing-Chang Zhong and published by John Wiley & Sons. This book was released on 2012-11-16 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating renewable energy and other distributed energy sources into smart grids, often via power inverters, is arguably the largest “new frontier” for smart grid advancements. Inverters should be controlled properly so that their integration does not jeopardize the stability and performance of power systems and a solid technical backbone is formed to facilitate other functions and services of smart grids. This unique reference offers systematic treatment of important control problems in power inverters, and different general converter theories. Starting at a basic level, it presents conventional power conversion methodologies and then ‘non-conventional’ methods, with a highly accessible summary of the latest developments in power inverters as well as insight into the grid connection of renewable power. Consisting of four parts – Power Quality Control, Neutral Line Provision, Power Flow Control, and Synchronisation – this book fully demonstrates the integration of control and power electronics. Key features include: the fundamentals of power processing and hardware design innovative control strategies to systematically treat the control of power inverters extensive experimental results for most of the control strategies presented the pioneering work on “synchronverters” which has gained IET Highly Commended Innovation Award Engineers working on inverter design and those at power system utilities can learn how advanced control strategies could improve system performance and work in practice. The book is a useful reference for researchers who are interested in the area of control engineering, power electronics, renewable energy and distributed generation, smart grids, flexible AC transmission systems, and power systems for more-electric aircraft and all-electric ships. This is also a handy text for graduate students and university professors in the areas of electrical power engineering, advanced control engineering, power electronics, renewable energy and smart grid integration.

Download or read book A Real Time Approach to Process Control written by William Y. Svrcek and published by John Wiley & Sons. This book was released on 2013-03-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Real- Time Approach to Process Control provides the reader with both a theoretical and practical introduction to this increasingly important approach. Assuming no prior knowledge of the subject, this text introduces all of the applied fundamentals of process control from instrumentation to process dynamics, PID loops and tuning, to distillation, multi-loop and plant-wide control. In addition, readers come away with a working knowledge of the three most popular dynamic simulation packages. The text carefully balances theory and practice by offering readings and lecture materials along with hands-on workshops that provide a 'virtual' process on which to experiment and from which to learn modern, real time control strategy development. As well as a general updating of the book specific changes include: A new section on boiler control in the chapter on common control loops A major rewrite of the chapters on distillation column control and multiple single-loop control schemes The addition of new figures throughout the text Workshop instructions will be altered to suit the latest versions of HYSYS, ASPEN and DYNSIM simulation software A new solutions manual for the workshop problems