Download or read book Distributed Generation Systems written by Gevork B. Gharehpetian and published by Butterworth-Heinemann. This book was released on 2017-05-19 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.580 pages Approx.580 pages
Download or read book Distributed Generation written by Tao Lin and published by Nova Science Publishers. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically discusses (a) Distributed Generation (DG), which operates in a single, stand-alone controllable system mode, and (b) the Microgrid (MG) powered by DG, along with the technical concepts, the impact on power systems, control and optimisation techniques, and their applications. It includes ten chapters that focus on the following five aspects: 1) An overview of distributed generation is introduced in Chapter One, and the technical concept of the microgrid is introduced in Chapter Eight with detail; 2) As the main element of distributed generation (DG), a smart inverter system for the control of active and reactive power in a grid-tied mode, which is treated as an interface between grid and the RES (Renewable Energy System), is studied concretely in Chapter Two; 3) The influence of distributed generation on power systems, including the impact of DG on the planning and operation of power systems, the impact of DG on power quality, and power system protection are concretely described and analysed in Chapters Three, Four and Five, respectively; ) The control and optimisation technologies for DG and MG. These techniques include: the Economic Model Predictive Control (EMPC) strategy for the solution of pricing management in community-based microgrids (MGs), which consider economic benefits as the control and optimisation objects; the distributed control and optimisation techniques for islanded microgrids (MGs) that consider stability as the control and optimisation objects; the intelligent load shedding for stability enhancement in an autonomous microgrid; and the recovery (restoration) control after a contingency situation. These are all investigated in Chapters Six, Seven, Eight and Nine, respectively; 5) The applications of renewable energy technology, such as efficient artisanal light fishing technologies that exploit lake light physics and light-fish interactions, are specifically presented in Chapter Ten.
Download or read book Handbook of Distributed Generation written by Ramesh Bansal and published by Springer. This book was released on 2017-03-07 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features extensive coverage of all Distributed Energy Generation technologies, highlighting the technical, environmental and economic aspects of distributed resource integration, such as line loss reduction, protection, control, storage, power electronics, reliability improvement, and voltage profile optimization. It explains how electric power system planners, developers, operators, designers, regulators and policy makers can derive many benefits with increased penetration of distributed generation units into smart distribution networks. It further demonstrates how to best realize these benefits via skillful integration of distributed energy sources, based upon an understanding of the characteristics of loads and network configuration.
Download or read book Integration of Distributed Energy Resources in Power Systems written by Toshihisa Funabashi and published by Academic Press. This book was released on 2016-03-23 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integration of Distributed Energy Resources in Power Systems: Implementation, Operation and Control covers the operation of power transmission and distribution systems and their growing difficulty as the share of renewable energy sources in the world’s energy mix grows and the proliferation trend of small scale power generation becomes a reality. The book gives students at the graduate level, as well as researchers and power engineering professionals, an understanding of the key issues necessary for the development of such strategies. It explores the most relevant topics, with a special focus on transmission and distribution areas. Subjects such as voltage control, AC and DC microgrids, and power electronics are explored in detail for all sources, while not neglecting the specific challenges posed by the most used variable renewable energy sources. Presents the most relevant aspects of the integration of distributed energy into power systems, with special focus on the challenges for transmission and distribution Explores the state-of the-art in applications of the most current technology, giving readers a clear roadmap Deals with the technical and economic features of distributed energy resources and discusses their business models
Download or read book Essentials of Distributed Generation Systems written by Gregory W. Massey and published by Jones & Bartlett Learning. This book was released on 2010 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on one of the hottest topics in the electrical industry, Essentials of Distributed Generation Systems provides a concise overview of the five most prominent distributed generation technologies in the market: solar power, wind power, fuel cells, microturbines, and engine-generators. Logically arranged, the first half of the text examines the strengths and weaknesses of each system, summarizing the components, operations, and limitations users will encounter with the use of these systems. A broader approach is taken in the second half of the book, with the author discussing common factors that affect each of the alternative technologies. With its accessible writing style and easy-to-use format, Essentials of Distributed Generation Systems is an ideal summary of available distributed generation systems and a helpfulon-the-job tool.
Download or read book Distributed Generation written by Anne-Marie Borbely and published by CRC Press. This book was released on 2001-06-27 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a result of deregulation, the US electric utility industry is undergoing a dramatic transformation with far-reaching technical and social consequences. At the heart of this transformation lies Distributed Generation (DG)-the substitution of centralized electricity production with smaller-scale technologies located in or near facilities and power
Download or read book Integration of Distributed Generation in the Power System written by Math H. J. Bollen and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The integration of new sources of energy like wind power, solar-power, small-scale generation, or combined heat and power in the power grid is something that impacts a lot of stakeholders: network companies (both distribution and transmission), the owners and operators of the DG units, other end-users of the power grid (including normal consumers like you and me) and not in the least policy makers and regulators. There is a lot of misunderstanding about the impact of DG on the power grid, with one side (including mainly some but certainly not all, network companies) claiming that the lights will go out soon, whereas the other side (including some DG operators and large parks of the general public) claiming that there is nothing to worry about and that it's all a conspiracy of the large production companies that want to protect their own interests and keep the electricity price high. The authors are of the strong opinion that this is NOT the way one should approach such an important subject as the integration of new, more environmentally friendly, sources of energy in the power grid. With this book the authors aim to bring some clarity to the debate allowing all stakeholders together to move to a solution. This book will introduce systematic and transparent methods for quantifying the impact of DG on the power grid.
Download or read book Distributed Generation written by Nicholas Jenkins and published by IET. This book was released on 2010-08-23 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The economics and locations of sustainable energy sources have meant that many of these new generators are connected into distribution networks. It is recognized that the information flow and control of distribution networks is inadequate for these future low-carbon electricity supply systems. The future distribution network will change its operation from passive to active, and the distributed generators will be controlled to support the operation of the power system. In many countries this transformation of electricity supply is managed through energy markets and privately owned, regulated transmission and distribution systems. --
Download or read book Distributed Generation in Liberalised Electricity Markets written by Organisation for Economic Co-operation and Development and published by Paris, France : OECD/IEA. This book was released on 2002 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surveys the current situation and market status of distributed generation in selected OECD countries, including the impact of current energy policies.
Download or read book The Law of Distributed Generation written by Sarah A.W. Fitts and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "The transformation of the electric grid from the traditional central station model to a more dynamic and interconnected system of distributed generation and distribution is a huge change in our lives, and yet one that is barely noticeable in day-to-day life unless you actually are looking for it. If you are looking, though, the rate of change is breathtaking. I know this first hand because in the roughly three years we have been working on this book the landscape already has evolved dramatically. In this time, topics we thought were interesting, such as battery storage, became drivers to the discussion while other topics faded in relevance. Indeed, one of the challenges of writing this book is our effort to assemble information that would remain interesting and useful to readers even as the technology and the law advanced. With the help of all of the authors and other contributors to this project, I think we have achieved this"--
Download or read book Power Generation Technologies written by Paul Breeze and published by Elsevier. This book was released on 2005-02-04 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book makes intelligible the wide range of electricity generating technologies available today, as well as some closely allied technologies such as energy storage. The book opens by setting the many power generation technologies in the context of global energy consumption, the development of the electricity generation industry and the economics involved in this sector. A series of chapters are each devoted to assessing the environmental and economic impact of a single technology, including conventional technologies, nuclear and renewable (such as solar, wind and hydropower). The technologies are presented in an easily digestible form.Different power generation technologies have different greenhouse gas emissions and the link between greenhouse gases and global warming is a highly topical environmental and political issue. With developed nations worldwide looking to reduce their emissions of carbon dioxide, it is becoming increasingly important to explore the effectiveness of a mix of energy generation technologies.Power Generation Technologies gives a clear, unbiased review and comparison of the different types of power generation technologies available. In the light of the Kyoto protocol and OSPAR updates, Power Generation Technologies will provide an invaluable reference text for power generation planners, facility managers, consultants, policy makers and economists, as well as students and lecturers of related Engineering courses. · Provides a unique comparison of a wide range of power generation technologies - conventional, nuclear and renewable· Describes the workings and environmental impact of each technology· Evaluates the economic viability of each different power generation system
Download or read book Operation of Distributed Energy Resources in Smart Distribution Networks written by Kazem Zare and published by Academic Press. This book was released on 2018-06-05 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operation of Distributed Energy Resources in Smart Distribution Networks defines the barriers and challenges of smart distribution networks, ultimately proposing optimal solutions for addressing them. The book considers their use as an important part of future electrical power systems and their ability to improve the local flexibility and reliability of electrical systems. It carefully defines the concept as a radial network with a cluster of distributed energy generations, various types of loads, and energy storage systems. In addition, the book details how the huge penetration of distributed energy resources and the intermittent nature of renewable generations may cause system problems. Readers will find this to be an important resource that analyzes and introduces the features and problems of smart distribution networks from different aspects. Integrates different types of elements, including electrical vehicles, demand response programs, and various renewable energy sources in distribution networks Proposes optimal operational models for the short-term performance and scheduling of a distribution network Discusses the uncertainties of renewable resources and intermittent load in the decision-making process for distribution networks
Download or read book A Text Book on Power Distribution and Distributed Generation written by Dr. Akhib Khan Bahamani and published by Authors Click Publishing . This book was released on 2024-02-03 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide, the effects of environmental, economic, social, political, and technical factors have led to the rapid deployment of various sources of renewable energy-based power generation. The incorporation of these generation technologies has led to the development of a broad array of new methods and tools to integrate this new form of generation into the power system networks. This book, comprises into five modules gives a comprehensive discussion on various renewable energy-based distributed generation (DG) technologies Module 1 discuss about the need for the distributed generation, Module 2 detailed description about the Distribution Generation Resources, Module 3 concern with the economic and control aspect of DG’s, Module 4 Proposes to Introduction to electrical distribution system and finally in Module 5 ends with the classification and design features of distribution system
Download or read book Power Electronics for Renewable and Distributed Energy Systems written by Sudipta Chakraborty and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: While most books approach power electronics and renewable energy as two separate subjects, Power Electronics for Renewable and Distributed Energy Systems takes an integrative approach; discussing power electronic converters topologies, controls and integration that are specific to the renewable and distributed energy system applications. An overview of power electronic technologies is followed by the introduction of various renewable and distributed energy resources that includes photovoltaics, wind, small hydroelectric, fuel cells, microturbines and variable speed generation. Energy storage systems such as battery and fast response storage systems are discussed along with application-specific examples. After setting forth the fundamentals, the chapters focus on more complex topics such as modular power electronics, microgrids and smart grids for integrating renewable and distributed energy. Emerging topics such as advanced electric vehicles and distributed control paradigm for power system control are discussed in the last two chapters. With contributions from subject matter experts, the diagrams and detailed examples provided in each chapter make Power Electronics for Renewable and Distributed Energy Systems a sourcebook for electrical engineers and consultants working to deploy various renewable and distributed energy systems and can serve as a comprehensive guide for the upper-level undergraduates and graduate students across the globe.
Download or read book Distributed Generation written by Loi Lei Lai and published by John Wiley & Sons. This book was released on 2008-03-11 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed power generation is a technology that could help to enable efficient, renewable energy production both in the developed and developing world. It includes all use of small electric power generators, whether located on the utility system, at the site of a utility customer, or at an isolated site not connected to the power grid. Induction generator (IG) is the most commonly used and cheapest technology, compatible with renewable energy resources. Permanent magnet (PM) generators have traditionally been avoided due to high fabrication costs; however, compared with IGs they are more reliable and productive. Distributed Generation thoroughly examines the principles, possibilities and limitations of creating energy with both IGs and PM generators. It takes an electrical engineering approach in the analysis and testing of these generators, and includes diagrams and extensive case study examples to better demonstrate how the integration of energy sources can be accomplished. The book also provides the practical tools needed to model and implement new techniques for generating energy through isolated or grid-connected systems. Besides a chapter introducing the technical, economic and environmental impacts of distributed generation, this book includes: an examination of various phase-balancing schemes for a three-phase IG operating on a single-phase power system; a coupled circuit 2-D finite element analysis of a grid-connected IG, with Steinmetz connection; a study of self-excited induction generator (SEIG) schemes for autonomous power systems, and the voltage and frequency control of SEIG with a slip-ring machine (SESRIG); a report on a PM synchronous generator with inset rotor for achieving a reduced voltage regulation when supplying an autonomous power system, and an analysis of its performance using a two-axis model and finite element method; experimental work on various IG and SEIG schemes. This book is a must-read for engineers, consultants, regulators, and environmentalists involved in energy production and delivery, helping them to evaluate renewable energy sources and to integrate these into an efficient energy delivery system. It is also a superior reference for undergraduates and postgraduates. Designers, operators, and planners will appreciate its unique contribution to the literature in this field.
Download or read book Modeling and Control of Fuel Cells written by M. H. Nehrir and published by John Wiley & Sons. This book was released on 2009-03-11 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book available on fuel cell modeling and control with distributed power generation applications The emerging fuel cell (FC) technology is growing rapidly in its applications from small-scale portable electronics to large-scale power generation. This book gives students, engineers, and scientists a solid understanding of the FC dynamic modeling and controller design to adapt FCs to particular applications in distributed power generation. The book begins with a fascinating introduction to the subject, including a brief history of the U.S. electric utility formation and restructuring. Next, it provides coverage of power deregulation and distributed generation (DG), DG types, fuel cell DGs, and the hydrogen economy. Building on that foundation, it covers: Principle operations of fuel cells Dynamic modeling and simulation of PEM and solid-oxide fuel cells Principle operations and modeling of electrolyzers Power electronic interfacing circuits for fuel cell applications Control of grid-connected and stand-alone fuel cell power generation systems Hybrid fuel cell–based energy system case studies Present challenges and the future of fuel cells MATLAB/SIMULINK-based models and their applications are available via a companion Web site. Modeling and Control of Fuel Cells is an excellent reference book for students and professionals in electrical, chemical, and mechanical engineering and scientists working in the FC area.
Download or read book Rural Electrification written by Hisham Zerriffi and published by Springer Science & Business Media. This book was released on 2010-11-08 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: For those in developed nations, suddenly being without electricity is a disaster: power cuts have us fretting over the food stored in the freezer, and even a few hours without lights, televisions, or air conditioning is an ordeal. However, for an estimated 1.6 billion people worldwide, the absence of electricity is their daily experience. An untold number of others live with electricity that is erratic and of poor quality. How can electric power be brought into their lives when the centralized utility models that have evolved in developed nations are not an economically viable option? Poor, rural communities in developing nations cannot simply be ‘plugged in’ to a grid. Small-scale Distributed Generation (DG), ranging from individual solar home systems to village level grids run off diesel generators, could provide the answer, and this book compares around 20 DG enterprises and projects in Brazil, Cambodia and China, each of which is considered to be a "business model" for distributed rural electrification. While large, centralized power projects often rely on big subsidies, this study shows that privately run and localized solutions can be both self-sustaining and replicable. Its three sections provide a general introduction to the issue of electrification and rural development, set out the details of the case studies and compare the models involved, and discuss the important thematic issues of equity, access to capital and cost-recovery. Hisham Zerriffi shows that in each case, it is not simply a matter of matching a particular technology to a particular need. Numerous institutional factors come into play including the regulatory regime, access to financial services, and government/utility support or opposition to the DG alternative. Despite this, in many countries, the question is not whether DG has a role to play. Rather it is a question of how it will play a role.
