Download or read book Distributed Facts Device For Flow Controls written by Dr. V.V.L.N. Sastry and published by Idea Publishing. This book was released on 2020-06-17 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible ac Transmission Systems (FACTS) devices are used to control power flow in the transmission grid to relieve congestion and limit loop flows. High cost and reliability concerns have limited the widespread deployment of FACTS solutions. This paper introduces the concept of Distributed FACTS (D-FACTS) as an alternative approach to realizing cost-effective power flow control. By way of example, a distributed series impedance (DSI) and a distributed static series compensator (DSSC) are shown that can be clipped on to an existing power line and can, dynamically and statically, change the impedance of the line so as to control power flow. Details of implementation and system impact are presented in the paper, along with experimental results.
Download or read book Power Flow Control with Distributed Flexible AC Transmission System D FACTS Devices written by David Alan Krieger and published by . This book was released on 2012 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate change, energy crisis and financial crisis are some of the issues that affect the transformation of power and the power industry. Distributed FACTS (or D-FACTS) devices are being used today to help correct inefficiencies within the current power grid. These devices can help a utility save money by transferring load off a power line near its thermal limits to one that is lightly loaded. While using D-FACTS devices, each MWh of power that does not have to go into power generation with coal can prevent the introduction of approximately 1 ton of pollution into the atmosphere. The potential of using Distributed FACTS devices in a power network should bring it into more widespread adoption.
Download or read book Power Electronics in Renewable Energy Systems and Smart Grid written by Bimal K. Bose and published by John Wiley & Sons. This book was released on 2019-06-27 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive and authoritative guide to power electronics in renewable energy systems Power electronics plays a significant role in modern industrial automation and high- efficiency energy systems. With contributions from an international group of noted experts, Power Electronics in Renewable Energy Systems and Smart Grid: Technology and Applications offers a comprehensive review of the technology and applications of power electronics in renewable energy systems and smart grids. The authors cover information on a variety of energy systems including wind, solar, ocean, and geothermal energy systems as well as fuel cell systems and bulk energy storage systems. They also examine smart grid elements, modeling, simulation, control, and AI applications. The book's twelve chapters offer an application-oriented and tutorial viewpoint and also contain technology status review. In addition, the book contains illustrative examples of applications and discussions of future perspectives. This important resource: Includes descriptions of power semiconductor devices, two level and multilevel converters, HVDC systems, FACTS, and more Offers discussions on various energy systems such as wind, solar, ocean, and geothermal energy systems, and also fuel cell systems and bulk energy storage systems Explores smart grid elements, modeling, simulation, control, and AI applications Contains state-of-the-art technologies and future perspectives Provides the expertise of international authorities in the field Written for graduate students, professors in power electronics, and industry engineers, Power Electronics in Renewable Energy Systems and Smart Grid: Technology and Applications offers an up-to-date guide to technology and applications of a wide-range of power electronics in energy systems and smart grids.
Download or read book Recent Advances in Energy Systems Power and Related Smart Technologies written by Kyandoghere Kyamakya and published by Springer Nature. This book was released on with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FACTS Controllers written by K. R PADIYAR and published by . This book was released on 2020-10 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Key Features:Concepts are explained with illustrative examples and case studies. Applications of SVC, TCSC, GCSC, SPST, STATCOM, SSSC, UPFC, IPFC and IPC for voltage/power control in transmission systems. Application of DSTATCOM, DVR and UPQC for improving power quality in distribution systems. Design of Power Oscillation Damping (POD) controllers. Mitigation of SSR using series FACTS Controllers. About the Book:The emerging technology of Flexible AC Transmission System (FACTS) enables planning and operation of power systems at minimum cost, without compromising security. This is based on modern high power electronic systems that provide fast controllability to ensure 'flexible' operation under changing system conditions. This book presents a comprehensive treatment of the subject by discussing the operating principles, mathematical models, control design and issues that affect the applications.
Download or read book Energy and Water Development Appropriations for Fiscal Year written by United States. Congress. Senate. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2006 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy and Water and Related Agencies Appropriations for Fiscal Year 2006 written by United States. Congress. Senate. Committee on Appropriations. Subcommittee on Energy and Water, and Related Agencies and published by . This book was released on 2005 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Power and Control Engineering written by S. N. Singh and published by Springer Nature. This book was released on 2019-11-29 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book features selected high-quality papers presented at the International Conference on Computing, Power and Communication Technologies 2019 (GUCON 2019), organized by Galgotias University, India, in September 2019. Divided into three sections, the book discusses various topics in the fields of power electronics and control engineering, power and energy systems, and machines and renewable energy. This interesting compilation is a valuable resource for researchers, engineers and students.
Download or read book Technological Innovation for Collective Awareness Systems written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2014-04-02 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 5th IFIP WG 5.5/SOCOLNET Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2014, held in Costa de Caparica, Portugal, in April 2014. The 68 revised full papers were carefully reviewed and selected from numerous submissions. They cover a wide spectrum of topics ranging from collaborative enterprise networks to microelectronics. The papers are organized in the following topical sections: collaborative networks; computational systems; self-organizing manufacturing systems; monitoring and supervision systems; advances in manufacturing; human-computer interfaces; robotics and mechatronics, Petri nets; multi-energy systems; monitoring and control in energy; modelling and simulation in energy; optimization issues in energy; operation issues in energy; power conversion; telecommunications; electronics: design; electronics: RF applications; and electronics: devices.
Download or read book Optimal Power Flow Using FACTS Devices written by L. Ashok Kumar and published by CRC Press. This book was released on 2020-12-04 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Power Flow Using FACTS Devices: Soft Computing Techniques develops intelligent algorithms to analyze optimal power flow (OPF) and to enhance the power transfer capability of the transmission line with reduced congestion. By providing elaborate studies on FACTS devices and by using soft computing metaheuristics algorithms such as Firefly, Cuckoo, Flower Pollination, and others., this book enables readers to know about algorithms in real-time power system applications and damping of subsynchronous resonance (SSR) oscillations. Key features of this book include: Offers comprehensive review of FACTS devices and the importance of soft computing techniques for solving OPF. Describes the various problems associated with power system operation and control. Addresses issues of SSR in power systems and proposes soft techniques for SSR analysis in power systems. Demonstrates of the importance of SSR and congestion management using intelligent FACTS devices as part of OPF. Covers power systems’ reliability, quality, cost-effectiveness, effects on customer goodwill, and pollution limits, including the deregulation of markets and different intelligent controllers. Optimal Power Flow Using FACTS Devices: Soft Computing Techniques is aimed at researchers and professionals in the field of power systems.
Download or read book Enhancement of Grid Connected Photovoltaic Systems Using Artificial Intelligence written by Amal M. Abd El- Hameid and published by Springer Nature. This book was released on 2023-05-11 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enhancement of Grid-Connected Photovoltaic Systems Using Artificial Intelligence presents methods for monitoring transmission systems and enhancing distribution system performance using modern optimization techniques considering different multi-objective functions such as voltage loss sensitivity indexes, reducing total annual cost, and voltage deviation. The authors offer a comprehensive survey of distributed energy resources (DERs), explain the backward/forward sweep (BFS) power flow algorithm, and present simulation results on the optimal integration of photovoltaic-based distributed generators (PV-DG) and distribution static synchronous compensators (DSTATCOM) in different transmission and distribution systems. This book will be a valuable academic and industry resource for electrical engineers, students, and researchers working on optimization techniques, photovoltaic systems, energy engineering, and artificial intelligence.
Download or read book Control and Operation of Grid Connected Wind Energy Systems written by Ali M. Eltamaly and published by Springer Nature. This book was released on 2021-03-04 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book analyses and discusses the current issues of integration of wind energy systems in the power systems. It collects recent studies in the area, focusing on numerous issues including unbalanced grid voltages, low-voltage ride-through and voltage stability of the grid. It also explores the impact of the emerging technologies of wind turbines and power converters in the integration of wind power systems in power systems. This book utilizes the editors’ expertise in the energy sector to provide a comprehensive text that will be of interest to researchers, graduate students and industry professionals.
Download or read book Transmission and Distribution written by Uday A. Bakshi and published by Technical Publications. This book was released on with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers all the aspects of Transmission and Distribution for undergraduate course. The various aspects of transmission and distribution systems, FACTS, sag calculations, parameters and performance of transmission lines, insulators, cables, substations and grounding systems are explained in the book with the help of comprehensive approach. The book starts with the discussion of basics of power system. It includes comparison of material required for overhead and underground systems. Various types of d.c. and a.c. distribution systems, EHVAC, HVDC and FACTS devices is also included in the book. The book explains the sag calculation under different conditions and sag template. In depth analysis of transmission line parameters is also included in the book. The book also covers the performance analysis of short, medium and long transmission lines along with circle diagram and methods of voltage control. The details of corona effect are explained in support. The book incorporates the discussion of types of insulators, string efficiency, methods of improving string efficiency, single and three core cables, grading of cables, heating and testing of cables. The chapter on substations includes the explanation of various types of substations, substation equipment’s and key diagrams. The book also covers the various types of grounding systems, grounding grids and resistance of grounding systems. The book uses plain and lucid language to explain each topic. The book provides the logical method of explaining the various complicated topics and stepwise methods to make the understanding easy. Each chapter is well supported with necessary illustrations, self-explanatory diagrams and large number of solved problems. The book explains the philosophy of the subject which makes the understanding of the concepts very clear and makes the subject more interesting.
Download or read book Electrical Distribution Networks written by Nouredine Hadjsaïd and published by John Wiley & Sons. This book was released on 2013-01-22 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamental aspects of the new generation of electrical distribution grids, taking as its starting point the opportunities that exist for restructuring existing infrastructure. It emphasizes the incorporation of renewable energy sources into the distribution grid and the need for a technological evolution towards the implementation of smartgrids. The book is organized into two parts: the first part analyzes the integration of distributed energy sources into the distribution grid and the impact of these sources on grid operation. After a general description of the general characteristics of distribution grids and renewable energy sources, it then analyzes the economics of electrical energy distribution networks and presents the impact of these sources on grid operation. The second part of the book then analyzes the various functions which allow for safe operation of the grid and realization of the path towards real world application of smartgrids.
Download or read book Smart Grid written by Stan Mark Kaplan and published by The Capitol Net Inc. This book was released on 2009 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource describes the thought behind a smart-grid system and the move away from a centralized, producer-controlled network to one that is less centralized and more consumer-interactive.
Download or read book Thyristor Based FACTS Controllers for Electrical Transmission Systems written by R. Mohan Mathur and published by John Wiley & Sons. This book was released on 2002-02-27 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretische Grundlagen und praktische Details werden in diesem Band gleichermaßen tiefgründig abgehandelt. Beispiele und Fallstudien zum Entwurf von Steuerungen und zur Messung der Leistungsfähigkeit runden den Text ab.
Download or read book Proceedings of the 5th International Conference on Frontiers in Intelligent Computing Theory and Applications written by Suresh Chandra Satapathy and published by Springer. This book was released on 2017-03-02 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a collection of high-quality peer-reviewed research papers presented at International Conference on Frontiers of Intelligent Computing: Theory and applications (FICTA 2016) held at School of Computer Engineering, KIIT University, Bhubaneswar, India during 16 - 17 September 2016. The book aims to present theories, methodologies, new ideas, experiences, applications in all areas of intelligent computing and its applications to various engineering disciplines like computer science, electronics, electrical, mechanical engineering, etc.
