Download or read book Displaying DIII D Plasma Data Using DEC s X Window System written by and published by . This book was released on 1991 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: The D3-D tokamak program, funded by the Department of Energy, carries out plasma physics and fusion energy research experiments. The machine began operation in February 1986; at that time, approximately 7 Mbytes of data was collected for shot. Since that time, the shot size has steadily increased to over 50 Mbytes with the average shot size between 35 and 45 Mbytes. Shots are fired every 12 to 15 minutes and last approximately 5 to 10 seconds. Between 30 and 40 shots are fired each day when plasma experiments are scheduled. In 1987 MFITD and MFITPLAY were written/modified. These two programs provide graphical output that allows the users to see, before the next shot, the plasma shape and the locations of the plasma and magnetic flux lines within the tokamak. MFITD performs the computations which calculate the shape and location of the plasma; it also graphically displays a small subset of timeslice data. MFITPLAY graphically displays the full set of timeslice data. Through interactive commands, MFITPLAY also allows the user to control the various aspects of how the data is displayed. In 1990, both programs were converted from User Interface Services (UIS) routines, which are part of the MicroVMS workstation graphics software, to DEC's X Window System using the DECWindows window manager. These modifications were required because of a move by Digital Equipment Corporation (DEC) to support X windows and phase out UIS. Due to the nature and purpose of each program, MFITD needed only simple graphics conversion while MFITPLAY was completely rewritten. The DECWindows version of MFITPLAY offers a number of improvements, such as a more intuitive user interface.
Download or read book Current Status of DIII D Real time Digital Plasma Control written by and published by . This book was released on 1999 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes the current status of real-time digital plasma control for the DIII-D tokamak. The digital plasma control system (PCS) has been in place at DIII-D since the early 1990s and continues to expand and improve in its capabilities to monitor and control plasma parameters for DIII-D fusion science experiments. The PCs monitors over 200 tokamak parameters from the DIII-D experiment using a real-time data acquisition system that acquires a new set of samples once every 60 [mu]s. This information is then used in a number of feedback control algorithms to compute and control a variety of parameters including those affecting plasma shape and position. A number of system related improvements has improved the usability and flexibility of the DIII-D PCS. These include more graphical user interfaces to assist in entering and viewing the large and ever growing number of parameters controlled by the PCS, increased interaction and accessibility from other DIII-D applications, and upgrades to the computer hardware and vended software. Future plans for the system include possible upgrades of the real-time computers, further links to other DIII-D diagnostic measurements such as real-time Thomson scattering analysis, and joint collaborations with other tokamak experiments including the NSTX at Princeton.
Download or read book CURRENT STATUS OF DIII D PLASMA CONTORL SYSTEM COMPUTER UPGADES written by R. D. JOHNSON and published by . This book was released on 2003 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: OAK-B135 This paper presents the latest status of the DIII-D Real-Time Digital Plasma Control System (PCS). The primary focus will be on the new computing and data acquisition hardware recently incorporated into the PCS and the added features provided by the new hardware. The upgrade of the PCS real-time computing and data acquisition hardware has been in progress for the past three and a half years. Since the initial proposal to migrate off the old VME i860 based system to more modern computing hardware, the PCS has seen a number of changes and improvements occurring in several planned phases. The final phase of the upgrade was successfully completed earlier this year. This phase included the complete removal of the i860 computers and Traq digitizer hardware and the incorporation of high performance Intel PCI based computers fitted with 32 Channel PCI digitizers from D-TACQ corporation. Distinguishing features of the completed PCS upgrade include a custom real-time data acquisition and control solution based on the Linux Intel computing platform and a scaleable multi CPU parallel processing architecture connected by a 2 gigabit per second Myrinet network. Among the many improvements resulting from the upgrade are the higher computing performance (factor 20 over the previous system), connectivity to remote DIII-D diagnostics through Myrinet fiber optic links and plasma diagnostic data displayed in real-time on digital oscilloscopes.
Download or read book RESEARCH PROGRESS AND HARDWARE SYSTEMS AT DIII D written by P. I. PETERSEN and published by . This book was released on 2003 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: OAK-B135 During the last two years significant progress has been made in the scientific understanding of DIII-D plasmas. Much of this progress has been enabled by the addition of new hardware systems. The electron cyclotron (EC) system has been upgraded from 3 MW to 6 MW, by adding three 1 MW gyrotrons with diamond windows and three steerable launchers (PPPL). The new gyrotrons have been tested to 1.0 MW for 5 s. The system has been used to control the 3/2 and 2/1 neoclassical tearing modes and to locally heat the plasma and thereby indirectly control the current density. Electron cyclotron current drive ECCD has been used to directly affect the current density. A Li-beam diagnostic has been brought on-line for measuring the edge current density using Zeeman splitting. A set of 12 coils (1-coils), consisting of six picture frame coils each above and below the midplane, with a capability of 7 kA for 10 s has been installed inside the DIII-D vessel. These coils, along with the existing six C-coils, are used to apply non-axisymmetric fields to the plasma for both exciting and controlling plasma instabilities. The DIII-D digital plasma control system is now used to not just control the shape and location of the plasma but also the electron temperature, density, the NTMs, RWMs, plasma beta and disruption mitigation. Plasma disruption experiments are extended to mitigation of real time detected disruptions on DIII-D.
Download or read book Access to DIII D Data Located in Multiple Files and Multiple Locations written by and published by . This book was released on 1993 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The General Atomics DIII-D tokamak fusion experiment is now collecting over 80 MB of data per discharge once every 10 min, and that quantity is expected to double within the next year. The size of the data files, even in compressed format, is becoming increasingly difficult to handle. Data is also being acquired now on a variety of UNIX systems as well as MicroVAX and MODCOMP computer systems. The existing computers collect all the data into a single shot file, and this data collection is taking an ever increasing amount of time as the total quantity of data increases. Data is not available to experimenters until it has been collected into the shot file, which is in conflict with the substantial need for data examination on a timely basis between shots. The experimenters are also spread over many different types of computer systems (possibly located at other sites). To improve data availability and handling, software has been developed to allow individual computer systems to create their own shot files locally. The data interface routine PTDATA that is used to access DIII-D data has been modified so that a user's code on any computer can access data from any computer where that data might be located. This data access is transparent to the user. Breaking up the shot file into separate files in multiple locations also impacts software used for data archiving, data management, and data restoration.
Download or read book Bringing Fusion to the U S Grid written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-11-17 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion energy offers the prospect of addressing the nation's energy needs and contributing to the transition to a low-carbon emission electrical generation infrastructure. Technology and research results from U.S. investments in the major fusion burning plasma experiment known as ITER, coupled with a strong foundation of research funded by the Department of Energy (DOE), position the United States to begin planning for its first fusion pilot plant. Strong interest from the private sector is an additional motivating factor, as the process of decarbonizing and modernizing the nation's electric infrastructure accelerates and companies seek to lead the way. At the request of DOE, Bringing Fusion to the U.S. Grid builds upon the work of the 2019 report Final Report of the Committee on a Strategic Plan for U.S. Burning Plasma Research to identify the key goals and innovations - independent of confinement concept - that are needed to support the development of a U.S. fusion pilot plant that can serve as a model for producing electricity at the lowest possible capital cost.
Download or read book Biostatistics written by Wayne W. Daniel and published by Wiley. This book was released on 2018-11-13 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to analyze and interpret enormous amounts of data has become a prerequisite for success in allied healthcare and the health sciences. Now in its 11th edition, Biostatistics: A Foundation for Analysis in the Health Sciences continues to offer in-depth guidance toward biostatistical concepts, techniques, and practical applications in the modern healthcare setting. Comprehensive in scope yet detailed in coverage, this text helps students understand—and appropriately use—probability distributions, sampling distributions, estimation, hypothesis testing, variance analysis, regression, correlation analysis, and other statistical tools fundamental to the science and practice of medicine. Clearly-defined pedagogical tools help students stay up-to-date on new material, and an emphasis on statistical software allows faster, more accurate calculation while putting the focus on the underlying concepts rather than the math. Students develop highly relevant skills in inferential and differential statistical techniques, equipping them with the ability to organize, summarize, and interpret large bodies of data. Suitable for both graduate and advanced undergraduate coursework, this text retains the rigor required for use as a professional reference.
Download or read book Controlled Fusion and Plasma Physics written by Kenro Miyamoto and published by Taylor & Francis. This book was released on 2006-10-23 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resulting from ongoing, international research into fusion processes, the International Tokamak Experimental Reactor (ITER) is a major step in the quest for a new energy source.The first graduate-level text to cover the details of ITER, Controlled Fusion and Plasma Physics introduces various aspects and issues of recent fusion research activ
Download or read book Stellarator and Heliotron Devices written by Masahiro Wakatani and published by Oxford University Press, USA. This book was released on 1998 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph describes plasma physics for magnetic confinement of high temperature plasmas in nonaxisymmetric toroidal magnetic fields or stellarators. The techniques are aimed at controlling nuclear fusion for continuous energy production. While the focus is on the nonaxisymmetric toroidal field, or heliotron, developed at Kyoto University, the physics applies equally to other stellarators and axisymmetric tokamaks. The author covers all aspects of magnetic confinement, formation of magnetic surfaces, magnetohydrodynamic equilibrium and stability, single charged particle confinement, neoclassical transport and plasma heating. He also reviews recent experiments and the prospects for the next generation of devices.
Download or read book Sensing the Environment Regulation of Local and Global Homeostasis by the Skin s Neuroendocrine System written by Andrzej T. Slominski and published by Springer Science & Business Media. This book was released on 2012-06-02 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: The skin, the body’s largest organ, is strategically located at the interface with the external environment where it detects, integrates and responds to a diverse range of stressors, including solar radiation. It has already been established that the skin is an important peripheral neuroendocrine-immune organ that is closely networked with central regulatory systems. These capabilities contribute to the maintenance of peripheral homeostasis. Specifically, epidermal and dermal cells produce and respond to classical stress neurotransmitters, neuropeptides and hormones, production which is stimulated by ultraviolet radiation (UVR), biological factors (infectious and non-infectious) and other physical and chemical agents. Examples of local biologically active products are cytokines, biogenic amines (catecholamines, histamine, serotonin and N-acetyl-serotonin), melatonin, acetylocholine, neuropeptides including pituitary (proopiomelanocortin-derived ACTH, b-endorphin or MSH peptides, thyroid stimulating hormone) and hypothalamic (corticotropin-releasing factor and related urocortins, thyroid-releasing hormone) hormones, as well as enkephalins and dynorphins, thyroid hormones, steroids (glucocorticoids, mineralocorticoids, sex hormones, 7-δ steroids), secosteroids, opioids and endocannabinoids. The production of these molecules is hierarchical, organized along the algorithms of classical neuroendocrine axes such as the hypothalamic pituitary adrenal axis (HPA), hypothalamic-thyroid axis (HPT), serotoninergic, melatoninergic, catecholaminergic, cholinergic, steroid/secosteroidogenic, opioid and endocannabinoid systems. Disruptions of these axes or of communication between them may lead to skin and/or systemic diseases. These local neuroendocrine networks also serve to limit the effect of noxious environmental agents to preserve local and consequently global homeostasis. Moreover, the skin-derived factors/systems can also activate cutaneous nerve endings to alert the brain to changes in the epidermal or dermal environments, or alternatively to activate other coordinating centers by direct (spinal cord) neurotransmission without brain involvement. Furthermore, rapid and reciprocal communications between epidermal and dermal and adnexal compartments are also mediated by neurotransmission including antidromic modes of conduction. Lastly, skin cells and the skin as an organ coordinate and/or regulate not only peripheral but also global homeostasis.
Download or read book Fundamentals of Magnetic Thermonuclear Reactor Design written by Vasilij A. Glukhikh and published by Woodhead Publishing. This book was released on 2018-05-21 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Magnetic Thermonuclear Reactor Design is a comprehensive resource on fusion technology and energy systems written by renowned scientists and engineers from the Russian nuclear industry. It brings together a wealth of invaluable experience and knowledge on controlled thermonuclear fusion (CTF) facilities with magnetic plasma confinement – from the first semi-commercial tokamak T-3, to the multi-billion international experimental thermonuclear reactor ITER, now in construction in France. As the INTOR and ITER projects have made an immense contribution in the past few decades, this book focuses on its practical engineering aspects and the basics of technical physics and electrical engineering. Users will gain an understanding of the key ratios between plasma and technical parameters, design streamlining algorithms and engineering solutions. Written by a team of qualified experts who have been involved in the design of thermonuclear reactors for over 50 years Outlines the most important features of the ITER project in France which is building the largest tokamak, including the design, material selection, safety and economic considerations Includes data on how to design magnetic fusion reactors using CAD tools, along with relevant regulatory documents
Download or read book Continuous Renal Replacement Therapy written by John A. Kellum and published by Oxford University Press. This book was released on 2016 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous Renal Replacement Therapy provides concise, evidence-based, bedside guidance for the management of critically ill patients with acute renal failure, offering quick reference answers to clinicians' questions about treatments and situations encountered in daily practice.
Download or read book Sleep and Pain written by Gilles Lavigne and published by Lippincott Williams & Wilkins. This book was released on 2015-06-01 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many in the research and clinical communities are becoming increasingly aware of the interactions between sleep disorders and chronic pain syndromes. There are a number of obstacles on the path to better patient care, and there is considerable room for improvement in the way knowledge is shared between professionals in the sleep and pain communities. This book serves as the first step toward enhancing communication between the sleep and pain communities with the intent of improving patient care.
Download or read book Fundamentals of Plasma Physics and Controlled Fusion written by Kenrō Miyamoto and published by . This book was released on 1997 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Medical Laboratory Science Review written by Robert R Harr and published by F.A. Davis. This book was released on 2012-10-11 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use this comprehensive resource to gain the theoretical and practical knowledge you need to be prepared for classroom tests and certification and licensure examinations.
Download or read book Handbook of Modern Sensors written by Jacob Fraden and published by Springer Science & Business Media. This book was released on 2006-04-29 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have passed since the publication of the previous edition of this book. During that time, sensor technologies have made a remarkable leap forward. The sensitivity of the sensors became higher, the dimensions became smaller, the sel- tivity became better, and the prices became lower. What have not changed are the fundamental principles of the sensor design. They are still governed by the laws of Nature. Arguably one of the greatest geniuses who ever lived, Leonardo Da Vinci, had his own peculiar way of praying. He was saying, “Oh Lord, thanks for Thou do not violate your own laws. ” It is comforting indeed that the laws of Nature do not change as time goes by; it is just our appreciation of them that is being re?ned. Thus, this new edition examines the same good old laws of Nature that are employed in the designs of various sensors. This has not changed much since the previous edition. Yet, the sections that describe the practical designs are revised substantially. Recent ideas and developments have been added, and less important and nonessential designs were dropped. Probably the most dramatic recent progress in the sensor technologies relates to wide use of MEMS and MEOMS (micro-electro-mechanical systems and micro-electro-opto-mechanical systems). These are examined in this new edition with greater detail. This book is about devices commonly called sensors. The invention of a - croprocessor has brought highly sophisticated instruments into our everyday lives.
Download or read book Tokamak Start Up Problems and Scenarios Related to the Transient Phases of a Thermonuclear Fusion Reactor Ettor Majorana International Science Series written by Heinz Knoepfel and published by Springer. This book was released on 2013-12-19 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the Course on "Tokamak Startup - Problems and Scenarios Related to the Transient Phases of a Thermonuclear Fusion Reactor" which was held in Erice, July 14-20, 1985. The fact that the critical startup and transient phases of a tokamak reactor are now the specific subject of a comprehensive international gathering of fusion specialists seems indicative of the substantial pro gress made in recent years towards attaining controlled ignition of a nuclear fusion fuel, i.e. towards demonstrating the scientific feasibili ty of controlled thermonuclear fusion. In fact, the steady-state burning phase has attracted so far most of the attention of fusion physicists and engineers, as it is conceptually more rewarding, and theoretically easier to handle. However, as for many large engineering systems, - nuclear fis- ... ':1' " . 10 ' ... Entrance to San Rocco's lecturing hall v sion power plants, or aerospace crafts, for example - the major issues of design and operation lie often in the startup, shutdown and power tran sieQt phases, rather than at the full load, or at cruising regimes. In ehoosing the contributions to this 7th Course of Prof. B.
