Download or read book Direct Contact Heat Transfer written by Frank Kreith and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: to increase the use of direct contact processes, the National Science Foundation sup ported a workshop on direct contact heat transfer at the Solar Energy Research Insti tute in the summer of 1985. We served as organizers for this workshop, which em phasized an area of thermal engineering that, in our opinion, has great promise for the future, but has not yet reached the point of wide-spread commercial application. Hence, a summary of the state of knowledge at this point is timely. The workshop had a dual objective: 1. To summarize the current state of knowledge in such a form that industrial practi tioners can make use of the available information. 2. To indicate the research and development needed to advance the state-of-the-art, indicating not only what kind of research is needed, but also the industrial poten tial that could be realized if the information to be obtained through the proposed research activities were available.
Download or read book Boiling Heat Transfer And Two Phase Flow written by L S Tong and published by Routledge. This book was released on 2018-05-04 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely updated, this graduate text describes the current state of boiling heat transfer and two-phase flow, in terms through which students can attain a consistent understanding. Prediction of real or potential boiling heat transfer behaviour, both in steady and transient states, is covered to aid engineering design of reliable and effective systems.
Download or read book Heat Transfer written by Aziz Belmiloudi and published by BoD – Books on Demand. This book was released on 2011-01-28 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades there has been a prolific increase in research and development in area of heat transfer, heat exchangers and their associated technologies. This book is a collection of current research in the above mentioned areas and discusses experimental, theoretical and calculation approaches and industrial utilizations with modern ideas and methods to study heat transfer for single and multiphase systems. The topics considered include various basic concepts of heat transfer, the fundamental modes of heat transfer (namely conduction, convection and radiation), thermophysical properties, condensation, boiling, freezing, innovative experiments, measurement analysis, theoretical models and simulations, with many real-world problems and important modern applications. The book is divided in four sections : "Heat Transfer in Micro Systems", "Boiling, Freezing and Condensation Heat Transfer", "Heat Transfer and its Assessment", "Heat Transfer Calculations", and each section discusses a wide variety of techniques, methods and applications in accordance with the subjects. The combination of theoretical and experimental investigations with many important practical applications of current interest will make this book of interest to researchers, scientists, engineers and graduate students, who make use of experimental and theoretical investigations, assessment and enhancement techniques in this multidisciplinary field as well as to researchers in mathematical modelling, computer simulations and information sciences, who make use of experimental and theoretical investigations as a means of critical assessment of models and results derived from advanced numerical simulations and improvement of the developed models and numerical methods.
Download or read book Handbook on Thermal Hydraulics in Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Elsevier. This book was released on 2024-07-29 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook on Thermal Hydraulics of Water-Cooled Nuclear Reactors, Volume 2, Modelling includes all new chapters which delve deeper into the topic, adding context and practical examples to help readers apply learnings to their own setting. Topics covered include experimental thermal-hydraulics and instrumentation, numerics, scaling and containment in thermal-hydraulics, as well as a title dedicated to good practices in verification and validation. This book will be a valuable reference for graduate and undergraduate students of nuclear or thermal engineering, as well as researchers in nuclear thermal-hydraulics and reactor technology, engineers working in simulation and modeling of nuclear reactors, and more. In addition, nuclear operators, code developers and safety engineers will also benefit from the practical guidance provided. - Presents a comprehensive analysis on the connection between nuclear power and thermal hydraulics - Includes end-of-chapter questions, quizzes and exercises to confirm understanding and provides solutions in an appendix - Covers applicable nuclear reactor safety considerations and design technology throughout
Download or read book Laser Doppler and Phase Doppler Measurement Techniques written by H.-E. Albrecht and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing the first comprehensive treatment, this book covers all aspects of the laser Doppler and phase Doppler measurement techniques, including light scattering from small particles, fundamental optics, system design, signal and data processing, tracer particle generation, and applications in single and two-phase flows. The book is intended as both a reference book for more experienced users as well as an instructional book for students. It provides ample material as a basis for a lecture course on the subject and represents one of the most comprehensive treatments of the phase Doppler technique to date. The book will serve as a valuable reference book in any fluid mechanics laboratory where the laser Doppler or phase Doppler techniques are used. This work reflects the authors' long practical experience in the development of the techniques and equipment, as the many examples confirm.
Download or read book Two Phase Heat Transfer written by Mirza Mohammed Shah and published by John Wiley & Sons. This book was released on 2021-02-23 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to two-phase heat transfer theory, practice, and applications Designed primarily as a practical resource for design and development engineers, Two-Phase Heat Transfer contains the theories and methods of two-phase heat transfer that are solution oriented. Written in a clear and concise manner, the book includes information on physical phenomena, experimental data, theoretical solutions, and empirical correlations. A very wide range of real-world applications and formulas/correlations for them are presented. The two-phase heat transfer systems covered in the book include boiling, condensation, gas-liquid mixtures, and gas-solid mixtures. The authora noted expert in this fieldalso reviews the numerous applications of two-phase heat transfer such as heat exchangers in refrigeration and air conditioning, conventional and nuclear power generation, solar power plants, aeronautics, chemical processes, petroleum industry, and more. Special attention is given to heat exchangers using mini-channels which are being increasingly used in a variety of applications. This important book: Offers a practical guide to two-phase heat transfer Includes clear guidance for design professionals by identifying the best available predictive techniques Reviews the extensive literature on heat transfer in two-phase systems Presents information to aid in the design and analysis of heat exchangers. Written for students and research, design, and development engineers, Two-Phase Heat Transfer is a comprehensive volume that covers the theory, methods, and applications of two-phase heat transfer.
Download or read book Safety of Thermal Water Reactors written by E. Skupinski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Community's Indirect Action Research Programme on the Safety of Thermal Water Reactors had as main obj ectives to execute useful fundamental research, complementary and confirmatory to on-going work in national programmes, and to improve collaboration and exchange of inform ation between laboratories in the Member States. The Seminar was aimed to report on work performed during the last five years and to identify useful further research areas with a tentative assessment of the state of the art for future work in certain issues of LWR-safety. The results obtained in 33 research projects executed in different national laboratories of the European Community were presented, evaluated and discussed, together with a number of invited papers on topics related to the research programme. Topics covered mainly within 3 distinct research areas or sub-programmes: Research Area A: The loss of coolant accident (LOCA) and the func tioning and performance of the emergency core cooling system (ECCS). Fundamental work on thermalhydraulics and heat transfer during refill and reflood of an uncovered core after a LOCA. Research Area B: The protection of nuclear power plants against external gas cloud explosions. Study of the impact on plant structure and systems of external explosions of dense combustible gas clouds due to accidental releases of hydro carbons in the vicinity of the plant. Research Area C: The release and distribution of radioactive fission products in the atmosphere following a reactor accident.
Download or read book Post Dryout Heat Transfer written by G.F. Hewitt and published by Routledge. This book was released on 2017-10-06 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of post-dryout heat transfer has generated great interest because of its importance in determining maximum clad temperature in nuclear reactor loss-of-coolant accidents (LOCAs). An associated phenomenon, the deterioration of heat transfer in boiling, is significant to other industrial sectors. This book provides comprehensive coverage of post-dryout heat transfer, discussing such essential topics as post-dryout heat transfer in dispersed flow, interpretation and use of transient data in surface rewetting by reinstatement of flow or by reducing heat flux, rod bundles, two-phase flow occurrences in the post-dryout region, various methods for predicting ""inverted annular flow,"" and new experiments for measuring thermodynamic nonequilibrium with probes in the channel. The book also presents a basis for independent safety assessment of nuclear reactors and chemical plant systems where post-dryout heat transfer may occur. Post-Dryout Heat Transfer will be a useful reference for researchers and professionals in the nuclear and chemical production industries.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Safety written by and published by . This book was released on 1975 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuel Heatup Simulation Tests FHUST written by S. G. Forbes and published by . This book was released on 1969 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Linear and Non linear Stability Analysis in Boiling Water Reactors written by Alfonso Prieto Guerrero and published by Woodhead Publishing. This book was released on 2018-10-15 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linear and Non-Linear Stability Analysis in Boiling Water Reactors: The Design of Real-Time Stability Monitors presents a thorough analysis of the most innovative BWR reactors and stability phenomena in one accessible resource. The book presents a summary of existing literature on BWRs to give early career engineers and researchers a solid background in the field, as well as the latest research on stability phenomena (propagation phenomena in BWRs), nuclear power monitors, and advanced computer systems used to for the prediction of stability. It also emphasizes the importance of BWR technology and embedded neutron monitoring systems (APRMs and LPRMs), and introduces non-linear stability parameters that can be used for the onset detection of instabilities in BWRs. Additionally, the book details the scope, advantages, and disadvantages of multiple advanced linear and non linear signal processing methods, and includes analytical case studies of existing plants. This combination makes Linear and Non-Linear Stability Analysis in Boiling Water Reactors a valuable resource for nuclear engineering students focusing on linear and non-linear analysis, as well as for those working and researching in a nuclear power capacity looking to implement stability methods and estimate decay ratios using non-linear techniques. - Explores the nuclear stability of Boiling Water Reactors based on linear and non-linear models - Evaluates linear signal processing methods such as autoregressive models, Fourier-based methods, and wavelets to calculate decay ratios - Proposes novel non-linear signal analysis techniques linked to non-linear stability indicators - Includes case studies of various existing nuclear power plants as well as mathematical models and simulations
Download or read book Thermal Hydraulics of Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Woodhead Publishing. This book was released on 2017-05-18 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Hydraulics of Water-Cooled Nuclear Reactors reviews flow and heat transfer phenomena in nuclear systems and examines the critical contribution of this analysis to nuclear technology development. With a strong focus on system thermal hydraulics (SYS TH), the book provides a detailed, yet approachable, presentation of current approaches to reactor thermal hydraulic analysis, also considering the importance of this discipline for the design and operation of safe and efficient water-cooled and moderated reactors. Part One presents the background to nuclear thermal hydraulics, starting with a historical perspective, defining key terms, and considering thermal hydraulics requirements in nuclear technology. Part Two addresses the principles of thermodynamics and relevant target phenomena in nuclear systems. Next, the book focuses on nuclear thermal hydraulics modeling, covering the key areas of heat transfer and pressure drops, then moving on to an introduction to SYS TH and computational fluid dynamics codes. The final part of the book reviews the application of thermal hydraulics in nuclear technology, with chapters on V&V and uncertainty in SYS TH codes, the BEPU approach, and applications to new reactor design, plant lifetime extension, and accident analysis. This book is a valuable resource for academics, graduate students, and professionals studying the thermal hydraulic analysis of nuclear power plants and using SYS TH to demonstrate their safety and acceptability. - Contains a systematic and comprehensive review of current approaches to the thermal-hydraulic analysis of water-cooled and moderated nuclear reactors - Clearly presents the relationship between system level (top-down analysis) and component level phenomenology (bottom-up analysis) - Provides a strong focus on nuclear system thermal hydraulic (SYS TH) codes - Presents detailed coverage of the applications of thermal-hydraulics to demonstrate the safety and acceptability of nuclear power plants
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1980 with total page 1280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat and Fluid Flow in Water Reactor Safety written by Institution of Mechanical Engineers (Great Britain). Thermodynamics and Fluid Mechanics Group and published by . This book was released on 1977 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Engineering of Droplets written by Huimin Liu and published by William Andrew. This book was released on 1999-12-31 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to encompass the fundamental phenomenon, principles, and processes of discrete droplets of both normal liquids and melts. It provides the reader with the science and engineering of discrete droplets, and provides researchers, scientists and engineers with the latest developments in the field. The book begins with a systematic review of various processes and techniques, along with their applications and associations with materials systems. This is followed by a description of the phenomena and principles in droplet processes. Correlations, calculations, and numerical modeling of the droplet processes provide insight into the effects of process parameters on droplet properties for optimization of atomizer design. Droplets are found in the areas of metallurgy, materials, automotive, aerospace, medicine, food processing, agriculture, and power generation, and encountered in a huge range of engineering applications.
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1977 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt:
