Download or read book Russell Hugo Ayliffe s Principles and Practice of Disinfection Preservation and Sterilization written by Adam P. Fraise and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highly respected, established text – a definitive reference in its field – covering in detail many methods of the elimination or prevention of microbial growth "highly recommended to hospital and research personnel, especially to clinical microbiologists, infectioncontrol and environmental-safety specialists, pharmacists, and dieticians." New England Journal of Medicine WHY BUY THIS BOOK? Completely revised and updated to reflect the rapid pace of change in this area Updated material on new and emerging technologies, focusing on special problems in hospitals, dentistry and pharmaceutical practice Gives practical advise on problems of disinfection and antiseptics in hospitals Discusses increasing problems of natural and acquired resistance to antibiotics New contributors give a fresh approach to the subject and ensure international coverage Systematic review of sterilization methods, with uses and advantages outlined for each Evaluation of disinfectants and their mechanisms of action

Download or read book Practical Healthcare Epidemiology written by Ebbing Lautenbach and published by Cambridge University Press. This book was released on 2018-04-19 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear, hands-on outline of best practices for infection prevention that directly improve patient outcomes across the healthcare continuum.

Download or read book Global Gidelines for the Pevention of Surgical Site Infection written by World Health Organization and published by . This book was released on 2017-01-27 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surgical site infections are caused by bacteria that get in through incisions made during surgery. They threaten the lives of millions of patients each year and contribute to the spread of antibiotic resistance. In low- and middle-income countries, 11% of patients who undergo surgery are infected in the process. In Africa, up to 20% of women who have a caesarean section contract a wound infection, compromising their own health and their ability to care for their babies. But surgical site infections are not just a problem for poor countries. In the United States, they contribute to patients spending more than 400 000 extra days in hospital at a cost of an additional US $10 billion per year. No international evidence-based guidelines had previously been available before WHO launched its global guidelines on the prevention of surgical site infection on 3 November 2016, and there are inconsistencies in the interpretation of evidence and recommendations in existing national guidelines. These new WHO guidelines are valid for any country and suitable to local adaptations, and take account of the strength of available scientific evidence, the cost and resource implications, and patient values and preferences.

Download or read book Block s Disinfection Sterilization and Preservation written by Gerald McDonnell and published by Lippincott Williams & Wilkins. This book was released on 2020-06-26 with total page 3015 pages. Available in PDF, EPUB and Kindle. Book excerpt: With more international contributors than ever before, Block’s Disinfection, Sterilization, and Preservation, 6th Edition, is the first new edition in nearly 20 years of the definitive technical manual for anyone involved in physical and chemical disinfection and sterilization methods. The book focuses on disease prevention—rather than eradication—and has been thoroughly updated with new information based on recent advances in the field and understanding of the risks, the technologies available, and the regulatory environments.

Download or read book Anthrax in Humans and Animals written by World Health Organization and published by World Health Organization. This book was released on 2008 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fourth edition of the anthrax guidelines encompasses a systematic review of the extensive new scientific literature and relevant publications up to end 2007 including all the new information that emerged in the 3-4 years after the anthrax letter events. This updated edition provides information on the disease and its importance, its etiology and ecology, and offers guidance on the detection, diagnostic, epidemiology, disinfection and decontamination, treatment and prophylaxis procedures, as well as control and surveillance processes for anthrax in humans and animals. With two rounds of a rigorous peer-review process, it is a relevant source of information for the management of anthrax in humans and animals.

Download or read book Essentials of Neuroanesthesia written by Hemanshu Prabhakar and published by Academic Press. This book was released on 2017-03-24 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essentials of Neuroanesthesia offers useful insights on the anesthetic management of neurosurgical and neurologic patients. This book covers all topics related to neuroanesthesia, providing essential knowledge on the brain and spinal cord. Sections include chapters on anatomy, physiology, and pharmacology, along with specific chapters related to various neurosurgical and neurological problems and their anesthetic management. This book provides an understanding of related issues, such as palliative care, evidence based practice of neuroanesthesia, sterilization techniques, biostatistics, and ethical issues, and is useful for trainees, clinicians, and researchers in the fields of neurosurgery, neurocritical care, neuroanesthesia, and neurology. - Offers useful insights on the anesthetic management of neurosurgical and neurologic patients - Discusses related issues, such as palliative care, evidence based practice of neuroanesthesia, sterilization techniques, biostatistics, and ethical issues - Useful for trainees, clinicians, and researchers in the fields of neurosurgery, neurocritical care, neuroanesthesia, and neurology

Download or read book Antisepsis Disinfection and Sterilization written by Gerald E. McDonnell and published by John Wiley & Sons. This book was released on 2020-07-10 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Antisepsis, Disinfection, and Sterilization: Types, Action, and Resistance, by Gerald E. McDonnell, is a detailed and accessible presentation of the current methods of microbial control. Each major category, such as physical disinfection methods, is given a chapter, in which theory, spectrum of activity, advantages, disadvantages, and modes of action of the methods are thoroughly and clearly presented. Sufficient background on the life cycles and general anatomy of microorganisms is provided so that the reader who is new to microbiology will better appreciate how physical and chemical biocides work their magic on microbes. Other topics in the book include: Evaluating the efficacy of chemical antiseptics and disinfectants, and of physical methods of microbial control and sterilization. Understanding how to choose the proper biocidal product and process for specific applications. Classic physical and chemical disinfection methods, such as heat, cold, non-ionizing radiation, acids, oxidizing agents, and metals. Newer chemical disinfectants, including, isothiazolones, micro-and nano-particles, and bacteriophages as control agents. Antisepsis of skin and wounds and the biocides that can be used as antiseptics. Classic methods of physical sterilization, such as, moist heat and dry heat sterilization, ionizing radiation, and filtration, along with newer methods, including, the use of plasma or pulsed light. Chemical sterilization methods that use ethylene oxide, formaldehyde, or a variety of other oxidizing agents. A detailed look at the modes of action of biocides in controlling microbial growth and disrupting microbial physiology. Mechanisms that microorganisms use to resist the effects of biocides. The second edition of Antisepsis, Disinfection, and Sterilization: Types, Action, and Resistance is well suited as a textbook and is outstanding as a reference book for facilities managers and application engineers in manufacturing plants, hospitals, and food production facilities. It is also essential for public health officials, healthcare professionals, and infection control practitioners.

Download or read book Management of Legionella in Water Systems written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-02-20 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Legionnaires' disease, a pneumonia caused by the Legionella bacterium, is the leading cause of reported waterborne disease outbreaks in the United States. Legionella occur naturally in water from many different environmental sources, but grow rapidly in the warm, stagnant conditions that can be found in engineered water systems such as cooling towers, building plumbing, and hot tubs. Humans are primarily exposed to Legionella through inhalation of contaminated aerosols into the respiratory system. Legionnaires' disease can be fatal, with between 3 and 33 percent of Legionella infections leading to death, and studies show the incidence of Legionnaires' disease in the United States increased five-fold from 2000 to 2017. Management of Legionella in Water Systems reviews the state of science on Legionella contamination of water systems, specifically the ecology and diagnosis. This report explores the process of transmission via water systems, quantification, prevention and control, and policy and training issues that affect the incidence of Legionnaires' disease. It also analyzes existing knowledge gaps and recommends research priorities moving forward.

Download or read book Sterilization Manual for Health Centers written by Silvia I. Acosta-Gnass and published by Pan Amer Health Org. This book was released on 2010 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated sterilisation manual informs health workers about the simple protocols and procedures that have been developed to prevent hospital-acquired infections both inside and outside the sterilisation plant. The guidelines included in this manual show the steps to follow in cleaning, preparing, sterilizing, storing and transporting hospital equipment so as to obtain sterile material. It is very important to be aware of this information in order to provide patients with safe health care.

Download or read book Sterilisation of Biomaterials and Medical Devices written by Sophie Lerouge and published by Elsevier. This book was released on 2012-09-27 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effective sterilisation of any material or device to be implanted in or used in close contact with the human body is essential for the elimination of harmful agents such as bacteria. Sterilisation of biomaterials and medical devices reviews established and commonly used technologies alongside new and emerging processes.Following an introduction to the key concepts and challenges involved in sterilisation, the sterilisation of biomaterials and medical devices using steam and dry heat, ionising radiation and ethylene oxide is reviewed. A range of non-traditional sterilisation techniques, such as hydrogen peroxide gas plasma, ozone and steam formaldehyde, is then discussed together with research in sterilisation and decontamination of surfaces by plasma discharges. Sterilisation techniques for polymers, drug-device products and tissue allografts are then reviewed, together with antimicrobial coatings for 'self-sterilisation' and the challenge presented by prions and endotoxins in the sterilisation of reusable medical devices. The book concludes with a discussion of future trends in the sterilisation of biomaterials and medical devices.With its distinguished editors and expert team of international contributors, Sterilisation of biomaterials and medical devices is an essential reference for all materials scientists, engineers and researchers within the medical devices industry. It also provides a thorough overview for academics and clinicians working in this area. - Reviews established and commonly used technologies alongside new and emerging processes - Introduces and reviews the key concepts and challenges involved in sterilisation - Discusses future trends in the sterilisation of biomaterials and medical devices

Download or read book Physics Pharmacology and Physiology for Anaesthetists written by Matthew E. Cross and published by Cambridge University Press. This book was released on 2014-03-06 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: A quick reference to basic science for anaesthetists, containing all the key information needed for FRCA exams.

Download or read book Prevention and Control of Infections in Hospitals written by Bjørg Marit Andersen and published by Springer. This book was released on 2019-02-25 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers extensive information on preventive and infection surveillance procedures, routines and policies adapted to the optimal infection control level needed to tackle today’s microbes in hospital practice. It especially focuses on preventive measures for serious hospital infections. Each chapter includes a practical section that addresses the main aspects of procedures and treatment, and a theoretical section that contains updated documentation that can be used for further study, or to help select infection control measures. Infection control concerns all healthcare professional working directly or indirectly with patients; in diagnosis, treatment, isolation measures, operations, equipment, drugs, cleaning, textiles, transport, porter service, food and water, building and maintenance, etc. Hygiene and environmental control is central to infection prevention for patients, visitors and staff alike. Good hygienic practices, individual infection control, well implemented and frequent environmental cleaning, and a high professional standard of hygiene in the treatment and care of patients, are essential to patient safety and a safe working environment. Addressing this essential topic, this book is intended for doctors, nurses and other healthcare workers, students in health-related subjects, hospital managers and health bureaucrats, as well as patients and their families.

Download or read book Sterility Sterilisation and Sterility Assurance for Pharmaceuticals written by Tim Sandle and published by Elsevier. This book was released on 2013-10-31 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure to adequately control any microbial challenge associated within process or product by robust sterilisation will result in a contaminated marketed product, with potential harm to the patient. Sterilisation is therefore of great importance to healthcare and the manufacturers of medical devices and pharmaceuticals. Sterility, sterilisation and sterility assurance for pharmaceuticals examines different means of rendering a product sterile by providing an overview of sterilisation methods including heat, radiation and filtration. The book outlines and discusses sterilisation technology and the biopharmaceutical manufacturing process, including aseptic filling, as well as aspects of the design of containers and packaging, as well as addressing the cleanroom environments in which products are prepared. Consisting of 18 chapters, the book comprehensively covers sterility, sterilisation and microorganisms; pyrogenicity and bacterial endotoxins; regulatory requirements and good manufacturing practices; and gamma radiation. Later chapters discuss e-beam; dry heat sterilisation; steam sterilisation; sterilisation by gas; vapour sterilisation; and sterile filtration, before final chapters analyse depyrogenation; cleanrooms; aseptic processing; media simulation; biological indicators; sterility testing; auditing; and new sterilisation techniques. - Covers the main sterilisation methods of physical removal, physical alteration and inactivation - Includes discussion of medical devices, aseptically filled products and terminally sterilised products - Describes bacterial, pyrogenic, and endotoxin risks to devices and products

Download or read book Sanitation written by Mario Stanga and published by John Wiley & Sons. This book was released on 2010-06-24 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finally, an up-to-date guide to cleaning and disinfection for the food preparation and processing industries. It discusses a host of examples from various food industries as well as topics universal to many industries, including biofilm formation, general sanitizing, and clean-in-place systems. Equally, the principles related to contamination, cleaning compounds, sanitizers and cleaning equipment are addressed. As a result, concepts of applied detergency are developed in order to understand and solve problems related to the cleaning and disinfection of laboratories, plants and other industrial environments where foods and beverages are prepared. Essential reading for food industry personnel.

Download or read book Zinsser Microbiology written by Hans Zinsser and published by . This book was released on 1988 with total page 1082 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Sterilization on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2018-02-22 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Effect of Sterilization Methods on Plastics and Elastomers, Fourth Edition brings together a wide range of essential data on the sterilization of plastics and elastomers, thus enabling engineers to make optimal material choices and design decisions. The data tables in this book enable engineers and scientists to select the right materials and sterilization method for a given product or application. The book is a unique and essential reference for anybody working with plastic materials that are likely to be exposed to sterilization methods, be it in medical device or packaging development, food packaging or other applications. - Presents essential data and practical guidance for engineers and scientists working with plastics in applications that require sterile packaging and equipment - Updated edition removes obsolete data, updates manufacturers, verifies data accuracy, and adds new plastics materials for comparison - Provides essential information and guidance for FDA submissions required for new medical devices

Download or read book Plastics in Medical Devices written by Vinny R. Sastri and published by Elsevier. This book was released on 2010-03-05 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: No book has been published that gives a detailed description of all the types of plastic materials used in medical devices, the unique requirements that the materials need to comply with and the ways standard plastics can be modified to meet such needs. This book will start with an introduction to medical devices, their classification and some of the regulations (both US and global) that affect their design, production and sale. A couple of chapters will focus on all the requirements that plastics need to meet for medical device applications. The subsequent chapters describe the various types of plastic materials, their properties profiles, the advantages and disadvantages for medical device applications, the techniques by which their properties can be enhanced, and real-world examples of their use. Comparative tables will allow readers to find the right classes of materials suitable for their applications or new product development needs.