Download or read book Discrete time Model Reference Adaptive Controller Design for Robotic Manipulators written by Shiaw-Pyng Yang and published by . This book was released on 1992 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Discrete time Explicit Model Reference Adaptive Control for Robotic Manipulators written by Junku Yuh and published by . This book was released on 1986 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this dissertation a direct approach to discrete-time model reference adaptive control (MRAC) based on hyperstability theory is proposed to control industrial robotic manipulators. For industrial robots and manipulators, which usually have highly nonlinear and complex dynamic equations and often have unknown inertia characteristics, it is very difficult to achieve high performance with conventional control strategies. This desired high performance in terms of speed and accuracy can be obtained by adaptive control techniques. Considering the effects of gravity, process noise and payload uncertainty the MRAC approach is investigated using simulation for a three degree of freedom industrial robot. These simulation results show that adaptive control techniques can provide robust properties in spite of poor a priori information regarding the robot dynamics and operating circumstances.
Download or read book Adaptive Control for Robotic Manipulators written by Dan Zhang and published by CRC Press. This book was released on 2017-02-03 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: The robotic mechanism and its controller make a complete system. As the robotic mechanism is reconfigured, the control system has to be adapted accordingly. The need for the reconfiguration usually arises from the changing functional requirements. This book will focus on the adaptive control of robotic manipulators to address the changed conditions. The aim of the book is to summarise and introduce the state-of-the-art technologies in the field of adaptive control of robotic manipulators in order to improve the methodologies on the adaptive control of robotic manipulators. Advances made in the past decades are described in the book, including adaptive control theories and design, and application of adaptive control to robotic manipulators.
Download or read book Application of Discrete Time Model Reference Adaptive Control to PUMA 560 Robot Manipulator written by W. Worger and published by . This book was released on 1986 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adaptive Control of Robot Manipulators written by An-Chyau Huang and published by World Scientific. This book was released on 2010 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces an unified function approximation approach to the control of uncertain robot manipulators containing general uncertainties. It works for free space tracking control as well as compliant motion control. It is applicable to the rigid robot and the flexible joint robot. Even with actuator dynamics, the unified approach is still feasible. All these features make the book stand out from other existing publications.
Download or read book Model Reference Adaptive Control of Mechanical Manipulators written by Roberto Horowitz and published by . This book was released on 1983 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adaptive Control of Mechanical Manipulators written by John J. Craig and published by Addison Wesley Publishing Company. This book was released on 1988 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fractional Modeling and Controller Design of Robotic Manipulators written by Abhaya Pal Singh and published by Springer Nature. This book was released on 2020-10-15 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book at hand is an appropriate addition to the field of fractional calculus applied to control systems. If an engineer or a researcher wishes to delve into fractional-order systems, then this book has many collections of such systems to work upon, and this book also tells the reader about how one can convert an integer-order system into an appropriate fractional-order one through an efficient and simple algorithm. If the reader further wants to explore the controller design for the fractional-order systems, then for them, this book provides a variety of controller design strategies. The use of fractional-order derivatives and integrals in control theory leads to better results than integer-order approaches and hence provides solid motivation for further development of control theory. Fractional-order models are more useful than the integer-order models when accuracy is of paramount importance. Real-time experimental validation of controller design strategies for the fractional-order plants is available. This book is beneficial to the academic institutes for postgraduate and advanced research-level that need a specific textbook on fractional control and its applications in srobotic manipulators. The book is also a valuable teaching and learning resource for undergraduate and postgraduate students.
Download or read book Theory and Implementation of Adaptive and Repetitive Control for Robot Manipulators written by Mingzhang Cai and published by . This book was released on 1989 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Model Reference Adaptive Control for Robotic Manipulators written by Henry Richard Asare and published by . This book was released on 1986 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adaptive Control for Robotic Manipulators written by Dan Zhang and published by CRC Press. This book was released on 2017-02-03 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The robotic mechanism and its controller make a complete system. As the robotic mechanism is reconfigured, the control system has to be adapted accordingly. The need for the reconfiguration usually arises from the changing functional requirements. This book will focus on the adaptive control of robotic manipulators to address the changed conditions. The aim of the book is to summarise and introduce the state-of-the-art technologies in the field of adaptive control of robotic manipulators in order to improve the methodologies on the adaptive control of robotic manipulators. Advances made in the past decades are described in the book, including adaptive control theories and design, and application of adaptive control to robotic manipulators.
Download or read book Model Reference Adaptive Control for Robotic Manipulators written by Masaaki Hayashi and published by . This book was released on 1986 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book Adaptive Control written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2011-06-06 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive Control (second edition) shows how a desired level of system performance can be maintained automatically and in real time, even when process or disturbance parameters are unknown and variable. It is a coherent exposition of the many aspects of this field, setting out the problems to be addressed and moving on to solutions, their practical significance and their application. Discrete-time aspects of adaptive control are emphasized to reflect the importance of digital computers in the application of the ideas presented. The second edition is thoroughly revised to throw light on recent developments in theory and applications with new chapters on: multimodel adaptive control with switching, direct and indirect adaptive regulation and adaptive feedforward disturbance compensation. Many algorithms are newly presented in MATLAB® m-file format to facilitate their employment in real systems. Classroom-tested slides for instructors to use in teaching this material are also now provided. All of this supplementary electronic material can be downloaded from fill in URL. The core material is also up-dated and re-edited to keep its perspective in line with modern ideas and more closely to associate algorithms with their applications giving the reader a solid grounding in: synthesis and analysis of parameter adaptation algorithms, recursive plant model identification in open and closed loop, robust digital control for adaptive control; • robust parameter adaptation algorithms, practical considerations and applications, including flexible transmission systems, active vibration control and broadband disturbance rejection and a supplementary introduction on hot dip galvanizing and a phosphate drying furnace. Control researchers and applied mathematicians will find Adaptive Control of significant and enduring interest and its use of example and application will appeal to practitioners working with unknown- and variable-parameter plant. Praise for the first edition: ...well written, interesting and easy to follow, so that it constitutes a valuable addition to the monographies in adaptive control for discrete-time linear systems... suitable (at least in part) for use in graduate courses in adaptive control.
Download or read book Adaptive Systems in Control and Signal Processing 1986 written by K.J. Aström and published by Elsevier. This book was released on 2016-07-21 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second IFAC workshop discusses the variety and applications of adaptive systems in control and signal processing. The various approaches to adaptive control systems are covered and their stability and adaptability analyzed. The volume also includes papers taken from two poster sessions to give a concise and comprehensive overview/treatment of this increasingly important field.
Download or read book Adaptive Control of Mechanical Manipulators written by John J. Craig and published by Addison Wesley Publishing Company. This book was released on 1988 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Discrete Time Control written by Khalid Abidi and published by Springer. This book was released on 2015-03-25 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide spectrum of systems such as linear and nonlinear multivariable systems as well as control problems such as disturbance, uncertainty and time-delays. The purpose of this book is to provide researchers and practitioners a manual for the design and application of advanced discrete-time controllers. The book presents six different control approaches depending on the type of system and control problem. The first and second approaches are based on Sliding Mode control (SMC) theory and are intended for linear systems with exogenous disturbances. The third and fourth approaches are based on adaptive control theory and are aimed at linear/nonlinear systems with periodically varying parametric uncertainty or systems with input delay. The fifth approach is based on Iterative learning control (ILC) theory and is aimed at uncertain linear/nonlinear systems with repeatable tasks and the final approach is based on fuzzy logic control (FLC) and is intended for highly uncertain systems with heuristic control knowledge. Detailed numerical examples are provided in each chapter to illustrate the design procedure for each control method. A number of practical control applications are also presented to show the problem solving process and effectiveness with the advanced discrete-time control approaches introduced in this book.
