Download or read book Discrete Modeling of Mechanical Systems written by F. Y. Chen and published by . This book was released on 1978 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mathematical Modelling of Complex Mechanical Systems written by Krzysztof Paweł Arczewski and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modelling of Mechanical Systems Discrete Systems written by Francois Axisa and published by Elsevier. This book was released on 2003-11-01 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first volume is concerned with discrete systems – the study of which constitutes the cornerstone of all mechanical systems, linear or non-linear. It covers the formulation of equations of motion and the systematic study of free and forced vibrations. The book goes into detail about subjects such as generalized coordinates and kinematical conditions; Hamilton’s principle and Lagrange equations; linear algebra in N-dimensional linear spaces and the orthogonal basis of natural modes of vibration of conservative systems. Also included are the Laplace transform and forced responses of linear dynamical systems, the Fourier transform and spectral analysis of excitation and response deterministic signals. Forthcoming volumes in this series: Vol II: Structural Elements; to be published in June 2005 Vol III: Fluid-structure Interactions; to be published in August 2006 Vol IV: Flow-induced Vibrations; to be published in August 2007 * Presents the general methods that provide a unified framework to model mathematically mechanical systems of interest to the engineer, analyzing the response of these systems * Focuses on linear problems, but includes some aspects of non-linear configuration * Comprehensive coverage of mathematical techniques used to perform computer-based analytical studies and numerical simulations * Discusses the mathematical techniques used to perform analytical studies and numerical simulations on the computer

Download or read book Mathematical Modelling of Complex Mechanical Systems Discrete models written by K. Arczewski and published by Prentice Hall. This book was released on 1993 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This, the first of a two-volume work, presents the fundamentals of model creation, providing a methodology for the creation of mathematical models at various levels of mechanical phenomena. Examples illustrate the text, taken from the fields of aeronautical, civil and mechanical engineering.

Download or read book Modelling of Mechanical Systems Discrete systems written by François Axisa and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Systems Classical Models written by Petre P. Teodorescu and published by Springer Science & Business Media. This book was released on 2008-09-24 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: As it was already seen in the first volume of the present book, its guideline is precisely the mathematical model of mechanics. The classical models which we refer to are in fact models based on the Newtonian model of mechanics, on its five principles, i. e. : the inertia, the forces action, the action and reaction, the parallelogram and the initial conditions principle, respectively. Other models, e. g. , the model of attraction forces between the particles of a discrete mechanical system, are part of the considered Newtonian model. Kepler’s laws brilliantly verify this model in case of velocities much smaller than the light velocity in vacuum. The non-classical models are relativistic and quantic. Mechanics has as object of study mechanical systems. The first volume of this book dealt with particle dynamics. The present one deals with discrete mechanical systems for particles in a number greater than the unity, as well as with continuous mechanical systems. We put in evidence the difference between these models, as well as the specificity of the corresponding studies; the generality of the proofs and of the corresponding computations yields a common form of the obtained mechanical results for both discrete and continuous systems. We mention the thoroughness by which the dynamics of the rigid solid with a fixed point has been presented. The discrete or continuous mechanical systems can be non-deformable (e. g.

Download or read book Mechanical Systems Classical Models written by Petre P. Teodorescu and published by Springer Science & Business Media. This book was released on 2009-09-30 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: All phenomena in nature are characterized by motion. Mechanics deals with the objective laws of mechanical motion of bodies, the simplest form of motion. In the study of a science of nature, mathematics plays an important rôle. Mechanics is the first science of nature which has been expressed in terms of mathematics, by considering various mathematical models, associated to phenomena of the surrounding nature. Thus, its development was influenced by the use of a strong mathematical tool. As it was already seen in the first two volumes of the present book, its guideline is precisely the mathematical model of mechanics. The classical models which we refer to are in fact models based on the Newtonian model of mechanics, that is on its five principles, i.e.: the inertia, the forces action, the action and reaction, the independence of the forces action and the initial conditions principle, respectively. Other models, e.g., the model of attraction forces between the particles of a discrete mechanical system, are part of the considered Newtonian model. Kepler’s laws brilliantly verify this model in case of velocities much smaller then the light velocity in vacuum.

Download or read book Mechanical Systems Classical Models Mechanics of discrete and continuous systems written by P. P. Teodorescu and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Non Smooth Deterministic or Stochastic Discrete Dynamical Systems written by Jerome Bastien and published by John Wiley & Sons. This book was released on 2013-03-18 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains theoretical and application-oriented methods to treat models of dynamical systems involving non-smooth nonlinearities. The theoretical approach that has been retained and underlined in this work is associated with differential inclusions of mainly finite dimensional dynamical systems and the introduction of maximal monotone operators (graphs) in order to describe models of impact or friction. The authors of this book master the mathematical, numerical and modeling tools in a particular way so that they can propose all aspects of the approach, in both a deterministic and stochastic context, in order to describe real stresses exerted on physical systems. Such tools are very powerful for providing reference numerical approximations of the models. Such an approach is still not very popular nevertheless, even though it could be very useful for many models of numerous fields (e.g. mechanics, vibrations, etc.). This book is especially suited for people both in research and industry interested in the modeling and numerical simulation of discrete mechanical systems with friction or impact phenomena occurring in the presence of classical (linear elastic) or non-classical constitutive laws (delay, memory effects, etc.). It aims to close the gap between highly specialized mathematical literature and engineering applications, as well as to also give tools in the framework of non-smooth stochastic differential systems: thus, applications involving stochastic excitations (earthquakes, road surfaces, wind models etc.) are considered. Contents 1. Some Simple Examples. 2. Theoretical Deterministic Context. 3. Stochastic Theoretical Context. 4. Riemannian Theoretical Context. 5. Systems with Friction. 6. Impact Systems. 7. Applications–Extensions. About the Authors Jérôme Bastien is Assistant Professor at the University Lyon 1 (Centre de recherche et d'Innovation sur le sport) in France. Frédéric Bernardin is a Research Engineer at Département Laboratoire de Clermont-Ferrand (DLCF), Centre d'Etudes Techniques de l'Equipement (CETE), Lyon, France. Claude-Henri Lamarque is Head of Laboratoire Géomatériaux et Génie Civil (LGCB) and Professor at Ecole des Travaux Publics de l'Etat (ENTPE), Vaulx-en-Velin, France.

Download or read book Design and Modeling of Mechanical Systems written by Mohamed Haddar and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSM ́2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSM ́2013 and contains a careful selection of high quality contributions, which were exposed during various sessions of the congress. The original articles presented here provide an overview of recent research advancements accomplished in the field mechanical engineering.

Download or read book Modelling of Mechanical Systems Fluid Structure Interaction written by Francois Axisa and published by Elsevier. This book was released on 2006-12-07 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an eminent authority in the field, Modelling of Mechanical Systems: Fluid-Structure Interaction is the third in a series of four self-contained volumes suitable for practitioners, academics and students alike in engineering, physical sciences and applied mechanics. The series skilfully weaves a theoretical and pragmatic approach to modelling mechanical systems and to analysing the responses of these systems. The study of fluid-structure interactions in this third volume covers the coupled dynamics of solids and fluids, restricted to the case of oscillatory motions about a state of static equilibrium. Physical and mathematical aspects of modelling these mechanisms are described in depth and illustrated by numerous worked out exercises. · Written by a world authority in the field in a clear, concise and accessible style · Comprehensive coverage of mathematical techniques used to perform computer-based analytical studies and numerical simulations · A key reference for mechanical engineers, researchers and graduate students

Download or read book Design and Modeling of Mechanical Systems III written by Mohamed Haddar and published by Springer. This book was released on 2017-11-25 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 7th International Congress on Design and Modeling of Mechanical Systems (CMSM’2017), held in Hammamet, Tunisia, from the 27th to the 29th of March 2017. It reports on both research findings, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, this proceedings offers a broad overview on the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2017 was jointly organized by two leading Tunisian research laboratories: the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax and the Mechanical Engineering Laboratory of the National Engineering School of Monastir..

Download or read book The Mechanical Systems Design Handbook written by Yildirim Hurmuzlu and published by CRC Press. This book was released on 2017-12-19 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a specific focus on the needs of the designers and engineers in industrial settings, The Mechanical Systems Design Handbook: Modeling, Measurement, and Control presents a practical overview of basic issues associated with design and control of mechanical systems. In four sections, each edited by a renowned expert, this book answers diverse questions fundamental to the successful design and implementation of mechanical systems in a variety of applications. Manufacturing addresses design and control issues related to manufacturing systems. From fundamental design principles to control of discrete events, machine tools, and machining operations to polymer processing and precision manufacturing systems. Vibration Control explores a range of topics related to active vibration control, including piezoelectric networks, the boundary control method, and semi-active suspension systems. Aerospace Systems presents a detailed analysis of the mechanics and dynamics of tensegrity structures Robotics offers encyclopedic coverage of the control and design of robotic systems, including kinematics, dynamics, soft-computing techniques, and teleoperation. Mechanical systems designers and engineers have few resources dedicated to their particular and often unique problems. The Mechanical Systems Design Handbook clearly shows how theory applies to real world challenges and will be a welcomed and valuable addition to your library.

Download or read book Mechanical Systems Classical Models written by Petre P. Teodorescu and published by Springer. This book was released on 2008-10-14 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: As it was already seen in the first volume of the present book, its guideline is precisely the mathematical model of mechanics. The classical models which we refer to are in fact models based on the Newtonian model of mechanics, on its five principles, i. e. : the inertia, the forces action, the action and reaction, the parallelogram and the initial conditions principle, respectively. Other models, e. g. , the model of attraction forces between the particles of a discrete mechanical system, are part of the considered Newtonian model. Kepler’s laws brilliantly verify this model in case of velocities much smaller than the light velocity in vacuum. The non-classical models are relativistic and quantic. Mechanics has as object of study mechanical systems. The first volume of this book dealt with particle dynamics. The present one deals with discrete mechanical systems for particles in a number greater than the unity, as well as with continuous mechanical systems. We put in evidence the difference between these models, as well as the specificity of the corresponding studies; the generality of the proofs and of the corresponding computations yields a common form of the obtained mechanical results for both discrete and continuous systems. We mention the thoroughness by which the dynamics of the rigid solid with a fixed point has been presented. The discrete or continuous mechanical systems can be non-deformable (e. g.

Download or read book Modelling of Mechanical Systems Structural Elements written by Francois Axisa and published by Elsevier. This book was released on 2005-08-22 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modelling of mechanical systems provides engineers and students with the methods to model and understand mechanical systems by using both mathematical and computer-based tools. Written by an eminent authority in the field, this is the second of four volumes which provide engineers with a comprehensive resource on this cornerstone mechanical engineering subject. Dealing with continuous systems, this book covers solid mechanics, beams, plates and shells. In a clear style and with a practical rather than theoretical approach, it shows how to model continuous systems in order to study vibration modes, motion and forces. Appendices give useful primers on aspects of the mathematics introduced in the book. Other volumes in the series cover discrete systems, fluid-structure interaction and flow-induced vibration. * Axisa is a world authority in the modelling of systems* Comprehensive coverage of mathematical techniques used to perform computer-based analytical studies and numerical simulations* A key reference for mechanical engineers, researchers and graduate students in this cornerstone subject

Download or read book Identification of Continuous time Models from Sampled Data written by Hugues Garnier and published by Springer Science & Business Media. This book was released on 2008-03-13 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to direct continuous-time model identification for 15 years. It cuts down on time spent hunting through journals by providing an overview of much recent research in an increasingly busy field. The CONTSID toolbox discussed in the final chapter gives an overview of developments and practical examples in which MATLAB® can be used for direct time-domain identification of continuous-time systems. This is a valuable reference for a broad audience.

Download or read book The Art of Modeling Mechanical Systems written by Friedrich Pfeiffer and published by Springer. This book was released on 2016-09-14 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume present rules for mechanical models in a general systematic way, always in combination with small and large examples, many from industry, illustrating the most important features of modeling. The best way to reach a good solution is discussed. The papers address researchers and engineers from academia and from industry, doctoral students and postdocs, working in the fields of mechanical, civil and electrical engineering as well as in fields like applied physics or applied mathematics.