Download or read book Smart Digital Manufacturing written by Rene Wolf and published by John Wiley & Sons. This book was released on 2020-10-02 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world progresses toward Industry 4.0, and manufacturers are challenged to successfully navigate this unique digital journey. To some, digitalization is a golden opportunity; to others, it is a necessary evil. But to optimist and pessimist alike, there is a widespread puzzlement over the practical details of digitalization. To many manufacturers, digital transformation is a vague and confusing concept they nevertheless must grapple with in order to survive the Fourth Industrial Revolution. The proliferation of digital manufacturing technologies adds to the confusion, leaving many manufacturers perplexed and unprepared, with little real insight into how emerging technologies can help them sustain a competitive edge in their markets. This book effectively conveys Siemens's knowledge and experience through a concept called "Smart Digital Manufacturing," a stepwise approach to realizing the promise of the Fourth Industrial Revolution. The Smart Digital Manufacturing roadmap provides guidance and enables low-risk, high-reward adoption of new manufacturing software technologies through a series of tipping-point investment decisions that result in optimized manufacturing performance. The book provides readers with a clear understanding of what digital technology has to offer them, and how and when to invest in these essential components of tomorrow?s factories. René Wolf is Senior Vice President of Manufacturing Operations Management Software for Siemens Digital Industries Software, a business unit of the Siemens Digital Factory Division. Raffaello Lepratti is Vice President of Business Development and Marketing for Siemens Digital Industries Software.

Download or read book Quantitative Analysis and Optimal Control of Energy Efficiency in Discrete Manufacturing System written by Yan Wang and published by Springer Nature. This book was released on 2020-06-01 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides energy efficiency quantitative analysis and optimal methods for discrete manufacturing systems from the perspective of global optimization. In order to analyze and optimize energy efficiency for discrete manufacturing systems, it uses real-time access to energy consumption information and models of the energy consumption, and constructs an energy efficiency quantitative index system. Based on the rough set and analytic hierarchy process, it also proposes a principal component quantitative analysis and a combined energy efficiency quantitative analysis. In turn, the book addresses the design and development of quantitative analysis systems. To save energy consumption on the basis of energy efficiency analysis, it presents several optimal control strategies, including one for single-machine equipment, an integrated approach based on RWA-MOPSO, and one for production energy efficiency based on a teaching and learning optimal algorithm. Given its scope, the book offers a valuable guide for students, teachers, engineers and researchers in the field of discrete manufacturing systems.

Download or read book Practical Guide to Digital Manufacturing written by Zhuming Bi and published by Springer Nature. This book was released on 2021-05-24 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the subject of digital manufacturing. It provides a practical guide for readers on using computer aided design (CAD), computer aided engineering (CAE) and computer aided manufacturing (CAM) and other computer assistive tools for the design of products, machines, processes and system integrations through the case studies of engineering projects. The book introduces a thorough theoretical foundation and discussion of the historical development, and enabling technologies of digital manufacturing. It also covers a broad range of computer aided tools for a variety of applications including: geometric modelling; assembly modelling; motion simulation; finite element analysis; manufacturing process simulation; machining programming; product data management; and, product lifecycle management. Practical Guide to Digital Manufacturing uses many real-world case studies to illustrate the discussed applications, making it easily readable for undergraduate and graduate students, as well as engineers with the needs of computer-aided design and manufacturing knowledge and skills.

Download or read book Investigations in Pattern Recognition and Computer Vision for Industry 4 0 written by Chowdhary, Chiranji Lal and published by IGI Global. This book was released on 2023-09-07 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The approaches to computer vision have undergone a long journey in recent years, but still, innovations are continuing with leverage increases in computing power, new data availability, and new ways to leverage machine-learning algorithms. As a branch of artificial intelligence (AI), computer vision brings meaningful information from images and videos. Such innovations help communicators to run better campaigns, amplify messages further, and stand out in a noisy, crowded marketplace. Investigations in Pattern Recognition and Computer Vision for Industry 4.0 provides a holistic discussion of the new practical applications and use cases of computer vision and communications. Covering topics such as social media filters, mobile computer vision, and AI-powered image editing, this book is ideal for academicians, researchers, postgraduate students, professional data analysts, research and development centers, organizations dealing with healthcare informatics, and IT firms.

Download or read book SPS2020 written by K. Säfsten and published by IOS Press. This book was released on 2020-12-24 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge-intensive product realization implies embedded intelligence; meaning that if both theoretical and practical knowledge and understanding of a subject is integrated into the design and production processes of products, this will significantly increase added value. This book presents papers accepted for the 9th Swedish Production Symposium (SPS2020), hosted by the School of Engineering, Jönköping University, Sweden, and held online on 7 & 8 October 2020 because of restrictions due to the Corona virus pandemic. The subtitle of the conference was Knowledge Intensive Product Realization in Co-Operation for Future Sustainable Competitiveness. The book contains the 57 papers accepted for presentation at the conference, and these are divided into nine sections which reflect the topics covered: resource efficient production; flexible production; virtual production development; humans in production systems; circular production systems and maintenance; integrated product and production development; advanced and optimized components, materials and manufacturing; digitalization for smart products and services; and responsive and efficient operations and supply chains. In addition, the book presents five special sessions from the symposium: development of changeable and reconfigurable production systems; smart production system design and development; supply chain relocation; management of manufacturing digitalization; and additive manufacturing in the production system. The book will be of interest to all those working in the field of knowledge-intensive product realization.

Download or read book Sustainable Design and Manufacturing 2020 written by Steffen G. Scholz and published by Springer Nature. This book was released on 2020-09-10 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of peer-reviewed papers, presented at the International Conference on Sustainable Design and Manufacturing (SDM 2020). Leading-edge research into sustainable design and manufacturing aims to enable the manufacturing industry to grow by adopting more advanced technologies and at the same time improve its sustainability by reducing its environmental impact. Relevant themes and topics include sustainable design, innovation and services; sustainable manufacturing processes and technology; sustainable manufacturing systems and enterprises; and decision support for sustainability. Application areas are wide and varied. The book provides an excellent overview of the latest developments in the sustainable design and manufacturing areas.

Download or read book Next Generation Supply Chains written by Rosanna Fornasiero and published by Springer Nature. This book was released on 2020-12-31 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores supply chains strategies to help companies face challenges such as societal emergency, digitalization, climate changes and scarcity of resources. The book identifies industrial scenarios for the next decade based on the analysis of trends at social, economic, environmental technological and political level, and examines how they may impact on supply chain processes and how to design next generation supply chains to answer these challenges. By mapping enabling technologies for supply chain innovation, the book proposes a roadmap for the full implementation of the supply chain strategies based on the integration of production and logistics processes. Case studies from process industry, discrete manufacturing, distribution and logistics, as well as ICT providers are provided, and policy recommendations are put forward to support companies in this transformative process.

Download or read book Discrete Mathematical Structures for Computer Science written by Bernard Kolman and published by Prentice Hall. This book was released on 1987 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text has been designed as a complete introduction to discrete mathematics, primarily for computer science majors in either a one or two semester course. The topics addressed are of genuine use in computer science, and are presented in a logically coherent fashion. The material has been organized and interrelated to minimize the mass of definitions and the abstraction of some of the theory. For example, relations and directed graphs are treated as two aspects of the same mathematical idea. Whenever possible each new idea uses previously encountered material, and then developed in such a way that it simplifies the more complex ideas that follow.

Download or read book Distortion in Music Production written by Gary Bromham and published by CRC Press. This book was released on 2023-06-12 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distortion in Music Production offers a range of valuable perspectives on how engineers and producers use distortion and colouration as production tools. Readers are provided with detailed and informed considerations on the use of non-linear signal processing, by authors working in a wide array of academic, creative, and professional contexts. Including comprehensive coverage of the process, as well as historical perspectives and future innovations, this book features interviews and contributions from academics and industry practitioners. Distortion in Music Production also explores ways in which music producers can implement the process in their work and how the effect can be used and abused through examination from technical, practical, and musicological perspectives. This text is one of the first to offer an extensive investigation of distortion in music production and constitutes essential reading for students and practitioners working in music production.

Download or read book Smart Digital Manufacturing written by Rene Wolf and published by John Wiley & Sons. This book was released on 2020-11-09 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world progresses toward Industry 4.0, and manufacturers are challenged to successfully navigate this unique digital journey. To some, digitalization is a golden opportunity; to others, it is a necessary evil. But to optimist and pessimist alike, there is a widespread puzzlement over the practical details of digitalization. To many manufacturers, digital transformation is a vague and confusing concept they nevertheless must grapple with in order to survive the Fourth Industrial Revolution. The proliferation of digital manufacturing technologies adds to the confusion, leaving many manufacturers perplexed and unprepared, with little real insight into how emerging technologies can help them sustain a competitive edge in their markets. This book effectively conveys Siemens's knowledge and experience through a concept called "Smart Digital Manufacturing," a stepwise approach to realizing the promise of the Fourth Industrial Revolution. The Smart Digital Manufacturing roadmap provides guidance and enables low-risk, high-reward adoption of new manufacturing software technologies through a series of tipping-point investment decisions that result in optimized manufacturing performance. The book provides readers with a clear understanding of what digital technology has to offer them, and how and when to invest in these essential components of tomorrow?s factories. René Wolf is Senior Vice President of Manufacturing Operations Management Software for Siemens Digital Industries Software, a business unit of the Siemens Digital Factory Division. Raffaello Lepratti is Vice President of Business Development and Marketing for Siemens Digital Industries Software.

Download or read book Advances in Production Management Systems Artificial Intelligence for Sustainable and Resilient Production Systems written by Alexandre Dolgui and published by Springer Nature. This book was released on 2021-09-01 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set IFIP AICT 630, 631, 632, 633, and 634 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2021, held in Nantes, France, in September 2021.* The 378 papers presented were carefully reviewed and selected from 529 submissions. They discuss artificial intelligence techniques, decision aid and new and renewed paradigms for sustainable and resilient production systems at four-wall factory and value chain levels. The papers are organized in the following topical sections: Part I: artificial intelligence based optimization techniques for demand-driven manufacturing; hybrid approaches for production planning and scheduling; intelligent systems for manufacturing planning and control in the industry 4.0; learning and robust decision support systems for agile manufacturing environments; low-code and model-driven engineering for production system; meta-heuristics and optimization techniques for energy-oriented manufacturing systems; metaheuristics for production systems; modern analytics and new AI-based smart techniques for replenishment and production planning under uncertainty; system identification for manufacturing control applications; and the future of lean thinking and practice Part II: digital transformation of SME manufacturers: the crucial role of standard; digital transformations towards supply chain resiliency; engineering of smart-product-service-systems of the future; lean and Six Sigma in services healthcare; new trends and challenges in reconfigurable, flexible or agile production system; production management in food supply chains; and sustainability in production planning and lot-sizing Part III: autonomous robots in delivery logistics; digital transformation approaches in production management; finance-driven supply chain; gastronomic service system design; modern scheduling and applications in industry 4.0; recent advances in sustainable manufacturing; regular session: green production and circularity concepts; regular session: improvement models and methods for green and innovative systems; regular session: supply chain and routing management; regular session: robotics and human aspects; regular session: classification and data management methods; smart supply chain and production in society 5.0 era; and supply chain risk management under coronavirus Part IV: AI for resilience in global supply chain networks in the context of pandemic disruptions; blockchain in the operations and supply chain management; data-based services as key enablers for smart products, manufacturing and assembly; data-driven methods for supply chain optimization; digital twins based on systems engineering and semantic modeling; digital twins in companies first developments and future challenges; human-centered artificial intelligence in smart manufacturing for the operator 4.0; operations management in engineer-to-order manufacturing; product and asset life cycle management for smart and sustainable manufacturing systems; robotics technologies for control, smart manufacturing and logistics; serious games analytics: improving games and learning support; smart and sustainable production and supply chains; smart methods and techniques for sustainable supply chain management; the new digital lean manufacturing paradigm; and the role of emerging technologies in disaster relief operations: lessons from COVID-19 Part V: data-driven platforms and applications in production and logistics: digital twins and AI for sustainability; regular session: new approaches for routing problem solving; regular session: improvement of design and operation of manufacturing systems; regular session: crossdock and transportation issues; regular session: maintenance improvement and lifecycle management; regular session: additive manufacturing and mass customization; regular session: frameworks and conceptual modelling for systems and services efficiency; regular session: optimization of production and transportation systems; regular session: optimization of supply chain agility and reconfigurability; regular session: advanced modelling approaches; regular session: simulation and optimization of systems performances; regular session: AI-based approaches for quality and performance improvement of production systems; and regular session: risk and performance management of supply chains *The conference was held online.

Download or read book THE DEFINITIVE GUIDE TO B2B DIGITAL TRANSFORMATION written by Fred Geyer and published by Frederick Geyer. This book was released on 2020-05-26 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides B2B leaders along a step by step path to uncommon growth through three transformative shifts: The Digital Selling Shift to digital demand generation, The Digital Customer Experience Makeover to digital customer engagement, The Digital Proposition Pivot to data-powered, digital solutions. The Definitive Guide is informed by the work of Fred Geyer at Prophet, a leading digital transformation consultancy, and Joerg Niessing at INSEAD, a global standard-bearer for business education. Rich case studies from Maersk, Michelin, Adobe, and Air Liquide with best practices from IBM, Salesforce.com, Thyssenkrupp, and scores of leading B2B companies illustrate how putting customers at the heart of digital transformation drives uncommon growth. Fred and Joerg map the route from customer insight to in-market implementation for each transformational shift in four steps: Where to Play - Identify top customer growth opportunities, How to Win - Build the strategy to win customer preference, What to Do - Effectively deliver the strategy, Who is Needed - Assemble the team to make it happen. The two biggest barriers to successful digital transformation, effectively using customer data and enabling employees, are addressed by outlining a clear path to navigate forward based on best practices from other leading companies. The guide has won rave reviews from B2B leaders: "This book illuminates the secret sauce of digital transformation in the B2B space" – David Aaker, renowned brand strategist and bestselling author. "A thought-provoking exploration of three crucial transformational shifts for B2B companies" – Vincent Clerc, CEO, Maersk Ocean & Logistics "This is a great guide to applying best practices to the formidable challenge of digital transformation in complex markets and supply chains." – Dr. Lars Brzoska, Chairman of the Board of Management, Jungheinrich AG. "By providing case examples and step by step assistance in determining where to play, how to win, what to do and who to win, this book fulfilled my need for inspiring and pragmatic transformation guidance" – Lindy Hood, Chief Customer Experience Officer, Zurich Financial North America

Download or read book Logistics Management and Strategy written by Alan Harrison and published by Pearson UK. This book was released on 2019 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Blackbody Radiometry written by Victor Sapritsky and published by Springer Nature. This book was released on 2020-10-19 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the first of a two-volume set, focuses on the basic physical principles of blackbody radiometry and describes artificial sources of blackbody radiation, widely used as sources of optical radiation, whose energy characteristics can be calculated on the base of fundamental physical laws. Following a review of radiometric quantities, radiation laws, and radiative heat transfer, it introduces the basic principles of blackbody radiators design, details of their practical implementation, and methods of measuring their defining characteristics, as well as metrological aspects of blackbody-based measurements. Chapters are dedicated to the effective emissivity concept, methods of increasing effective emissivities, their measurement and modeling using the Monte Carlo method, techniques of blackbody radiators heating, cooling, isothermalization, and measuring their temperature. An extensive and comprehensive reference source, this book is of considerable value to students, researchers, and engineers involved in any aspect of blackbody radiometry.

Download or read book Training Engineering Students for Modern Technological Advancement written by Alves, Anabela Carvalho and published by IGI Global. This book was released on 2021-12-17 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering education leads the preparation of the next generation of engineers. This is a difficult task as engineering practices rapidly evolve, pressured by the technological advancements promoted by these same engineers. Engineering schools are integrated into large and rigid higher education institutions (HEI) that are not known for their agility. Nevertheless, engineering educators must have the agility to go beyond HEI boundaries to close the gap between professional practice needs and engineering education. Training Engineering Students for Modern Technological Advancement examines the role of engineering teachers in preparing the next generation of engineers and presents perspectives on active learning methods for engineering education. As such, it contributes to bypassing the compartmentalized way of course organization typical in many HEIs and prepares for more agile engineering education. Covering topics such as game-based teaching methods, Industry 4.0, and management skills, this book is a dynamic resource ideal for engineers, engineering professors, engineering students, general educators, engineering professionals, academicians, and researchers.

Download or read book Machine Learning for Cyber Physical Systems written by Jürgen Beyerer and published by Springer Nature. This book was released on 2020-12-23 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access proceedings presents new approaches to Machine Learning for Cyber Physical Systems, experiences and visions. It contains selected papers from the fifth international Conference ML4CPS – Machine Learning for Cyber Physical Systems, which was held in Berlin, March 12-13, 2020. Cyber Physical Systems are characterized by their ability to adapt and to learn: They analyze their environment and, based on observations, they learn patterns, correlations and predictive models. Typical applications are condition monitoring, predictive maintenance, image processing and diagnosis. Machine Learning is the key technology for these developments.

Download or read book Sustainable Management written by Petra Molthan-Hill and published by Taylor & Francis. This book was released on 2023-08-22 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Management: A Complete Guide for Faculty and Students is both a textbook for students, as well as a teaching guide for educators. With a full introduction to sustainable management, the book covers a wide range of subject areas relevant to business and management students. It enables faculty to incorporate sustainability and climate solutions into their modules, and is also very accessible for self-directed studies. This third edition features fully updated chapters on how to integrate the Sustainable Development Goals into key disciplines in business, including economics, operations, marketing, HR, strategy, and financial reporting. We also cover topics such as corporate peacemaking, greenhouse gas management and crowdsourcing. The book offers a new chapter on how to integrate climate solutions and climate change mitigation education into business and management schools, as well as many ideas in each chapter on how to do so. The chapter on employability and sustainability was fully redesigned adding new resources, which can be used in any educational establishment. Educators in business schools and trainers in organisations will find short readymade seminars/workshops and a wide array of learning resources supported by a companion website.