Download or read book Direct Numerical Simulation of Transition to Turbulence and Turbulence Control in Pipe Flow written by and published by . This book was released on 2014 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this thesis is the transition to turbulence and turbulence control in pipe flow. In pipes turbulence arises despite the linear stability of the laminar flow (subcritical transition) and directly from onset the flow is spatio-temporally complex. Given sufficiently strong perturbations, turbulence appears in localized patches (puffs) at low Reynolds numbers. At high Reynolds number, patches aggressively grow (slugs) and eventually render the flow fully turbulent. The questions of when and how turbulence starts to grow have long challenged scientists and will be discussed in-dep...
Download or read book Transition And Turbulence Control written by Mohamed Gad-el-hak and published by World Scientific. This book was released on 2005-12-27 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains articles based on lectures given at the Workshop on Transition and Turbulence Control, hosted by the Institute for Mathematical Sciences, National University of Singapore, 8-10 December 2004. The lecturers included 13 of the world's foremost experts in the control of transitioning and turbulent flows. The chapters cover a wide range of subjects in the broad area of flow control, and will be useful to researchers working in this area in academia, government laboratories and industry. The coverage includes control theory, passive, active and reactive methods for controlling transitional and turbulent wall-bounded flows, noise suppression and mixing enhancement of supersonic turbulent jets, compliant coatings, modern flow diagnostic systems, and swept wing instabilities.
Download or read book Engineering Turbulence Modelling and Experiments 5 written by W. Rodi and published by Elsevier. This book was released on 2002-08-21 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence is one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends increasingly on the performance of the turbulence models. This series of symposia provides a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The papers in this set of proceedings were presented at the 5th International Symposium on Engineering Turbulence Modelling and Measurements in September 2002. They look at a variety of areas, including: Turbulence modelling; Direct and large-eddy simulations; Applications of turbulence models; Experimental studies; Transition; Turbulence control; Aerodynamic flow; Aero-acoustics; Turbomachinery flows; Heat transfer; Combustion systems; Two-phase flows. These papers are preceded by a section containing 6 invited papers covering various aspects of turbulence modelling and simulation as well as their practical application, combustion modelling and particle-image velocimetry.
Download or read book Progress in Turbulence V written by Alessandro Talamelli and published by Springer Science & Business Media. This book was released on 2013-08-26 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the edited and reviewed contributions presented in the 5th iTi Conference in Bertinoro covering fundamental aspects in turbulent flows. In the spirit of the iTi initiative, the volume is produced after the conference so that the authors had the possibility to incorporate comments and discussions raised during the meeting. Turbulence presents a large number of aspects and problems, which are still unsolved and which challenge research communities in engineering and physical sciences both in basic and applied research. The book presents recent advances in theory related to new statistical approaches, effect of non-linearities and presence of symmetries. This edition presents new contributions related to the physics and control of laminar-turbulent transition in wall-bounded flows, which may have a significant impact on drag reduction applications. Turbulent boundary layers, at increasing Reynolds number, are the main subject of both computational and experimental long research programs aimed at improving our knowledge on scaling, energy distribution at different scales, structure eduction, roughness effects to name only a few. Like previous editions several numerical and experimental analysis of complex flows, mostly related to applications, are presented. The structure of the present book is as such that contributions have been bundled according to covering topics i.e. I Theory, II Stability, III Wall bounded flows, IV, Complex flows, V Acoustic, VI Numerical methods. The volume is dedicated to the memory of Prof. Rudolf Friedrich who prematurely died in Münster/Germany on the 16th of August 2012. In his honor the conference has started with a special session dedicated to his work.
Download or read book Simulation and Modeling of Turbulent Flows written by Thomas B. Gatski and published by Oxford University Press. This book was released on 1996-07-11 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides students and researchers in fluid engineering with an up-to-date overview of turbulent flow research in the areas of simulation and modeling. A key element of the book is the systematic, rational development of turbulence closure models and related aspects of modern turbulent flow theory and prediction. Starting with a review of the spectral dynamics of homogenous and inhomogeneous turbulent flows, succeeding chapters deal with numerical simulation techniques, renormalization group methods and turbulent closure modeling. Each chapter is authored by recognized leaders in their respective fields, and each provides a thorough and cohesive treatment of the subject.
Download or read book Studying Turbulence Using Numerical Simulation Databases written by Center for Turbulence Research (U.S.) and published by . This book was released on 1987 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Studying Turbulence Using Numerical Simulation Databases III written by Center for Turbulence Research (U.S.) and published by . This book was released on 1990 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seventh IUTAM Symposium on Laminar Turbulent Transition written by Philipp Schlatter and published by Springer Science & Business Media. This book was released on 2010-03-11 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: The origins of turbulent ?ow and the transition from laminar to turbulent ?ow are the most important unsolved problems of ?uid mechanics and aerodynamics. - sides being a fundamental question of ?uid mechanics, there are numerous app- cations relying on information regarding transition location and the details of the subsequent turbulent ?ow. For example, the control of transition to turbulence is - pecially important in (1) skin-friction reduction of energy ef?cient aircraft, (2) the performance of heat exchangers and diffusers, (3) propulsion requirements for - personic aircraft, and (4) separation control. While considerable progress has been made in the science of laminar to turbulent transition over the last 30 years, the c- tinuing increase in computer power as well as new theoretical developments are now revolutionizing the area. It is now starting to be possible to move from simple 1D eigenvalue problems in canonical ?ows to global modes in complex ?ows, all - companied by accurate large-scale direct numerical simulations (DNS). Here, novel experimental techniques such as modern particle image velocimetry (PIV) also have an important role. Theoretically the in?uence of non-normality on the stability and transition is gaining importance, in particular for complex ?ows. At the same time the enigma of transition in the oldest ?ow investigated, Reynolds pipe ?ow tran- tion experiment, is regaining attention. Ideas from dynamical systems together with DNS and experiments are here giving us new insights.
Download or read book Modeling and Simulation of Turbulent Flows written by Roland Schiestel and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title provides the fundamental bases for developing turbulence models on rational grounds. The main different methods of approach are considered, ranging from statistical modelling at various degrees of complexity to numerical simulations of turbulence. Each of these various methods has its own specific performances and limitations, which appear to be complementary rather than competitive. After a discussion of the basic concepts, mathematical tools and methods for closure, the book considers second order closure models. Emphasis is placed upon this approach because it embodies potentials for clarifying numerous problems in turbulent shear flows. Simpler, generally older models are then presented as simplified versions of the more general second order models. The influence of extra physical parameters is also considered. Finally, the book concludes by examining large Eddy numerical simulations methods. Given the book’s comprehensive coverage, those involved in the theoretical or practical study of turbulence problems in fluids will find this a useful and informative read.
Download or read book Direct Numerical Simulation of Incompressible Pipe Flow Using a B spline Spectral Method written by Patrick Loulou and published by . This book was released on 1996 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Methods in Turbulence Simulation written by Robert Moser and published by Elsevier. This book was released on 2022-11-30 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Turbulence Simulation provides detailed specifications of the numerical methods needed to solve important problems in turbulence simulation. Numerical simulation of turbulent fluid flows is challenging because of the range of space and time scales that must be represented. This book provides explanations of the numerical error and stability characteristics of numerical techniques, along with treatments of the additional numerical challenges that arise in large eddy simulations. Chapters are written as tutorials by experts in the field, covering specific both contexts and applications. Three classes of turbulent flow are addressed, including incompressible, compressible and reactive, with a wide range of the best numerical practices covered. A thorough introduction to the numerical methods is provided for those without a background in turbulence, as is everything needed for a thorough understanding of the fundamental equations. The small scales that must be resolved are generally not localized around some distinct small-scale feature, but instead are distributed throughout a volume. These characteristics put particular strain on the numerical methods used to simulate turbulent flows. Includes a detailed review of the numerical approximation issues that impact the simulation of turbulence Provides a range of examples of large eddy simulation techniques Discusses the challenges posed by boundary conditions in turbulence simulation and provides approaches to addressing them
Download or read book Advanced Turbulent Flow Computations written by Roger Peyret and published by Springer. This book was released on 2014-05-04 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects the lecture notes concerning the IUTAM School on Advanced Turbulent Flow Computations held at CISM in Udine September 7–11, 1998. The course was intended for scientists, engineers and post-graduate students interested in the application of advanced numerical techniques for simulating turbulent flows. The topic comprises two closely connected main subjects: modelling and computation, mesh pionts necessary to simulate complex turbulent flow.
Download or read book Engineering Turbulence Modelling and Experiments 6 written by Wolfgang Rodi and published by Elsevier. This book was released on 2005-05-05 with total page 1011 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the world renowned ERCOFTAC (International Symposium on Engineering Turbulence Modelling and Measurements). The proceedings include papers dealing with the following areas of turbulence: · Eddy-viscosity and second-order RANS models · Direct and large-eddy simulations and deductions for conventional modelling · Measurement and visualization techniques, experimental studies · Turbulence control · Transition and effects of curvature, rotation and buoyancy on turbulence · Aero-acoustics · Heat and mass transfer and chemically reacting flows · Compressible flows, shock phenomena · Two-phase flows · Applications in aerospace engineering, turbomachinery and reciprocating engines, industrial aerodynamics and wind engineering, and selected chemical engineering problems Turbulence remains one of the key issues in tackling engineering flow problems. These problems are solved more and more by CFD analysis, the reliability of which depends strongly on the performance of the turbulence models employed. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation. As in other fields of Science, in the rapidly developing discipline of turbulence, swift progress can be achieved only by keeping up to date with recent advances all over the world and by exchanging ideas with colleagues active in related fields.
Download or read book Direct Numerical Simulation of Transitions Toward Turbulence in Complex Channel Flows written by Bradley D. Duncan and published by . This book was released on 1998 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulence Structure and Modulation written by Alfredo Soldati and published by Springer. This book was released on 2014-05-04 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling turbulence is an important issue for a number of technological applications. Several methods to modulate turbulence are currently being investigated. This book describes various aspects of turbulence structure and modulation, and explains and discusses the most promising techniques in detail.
Download or read book Engineering Turbulence Modelling and Experiments 4 written by D. Laurence and published by Elsevier. This book was released on 1999-04-14 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain the papers presented at the 4th International Symposium on Engineering Turbulence Modelling and Measurements held at Ajaccio, Corsica, France from 24-26 May 1999. It follows three previous conferences on the topic of engineering turbulence modelling and measurements. The purpose of this series of symposia is to provide a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. Turbulence is still one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends more and more on the performance of the turbulence models. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation.
Download or read book Engineering Turbulence Modelling and Experiments 3 written by G. Bergeles and published by Newnes. This book was released on 2012-12-02 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and discussses new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. At present, turbulence is one of the key issues in tackling engineering flow problems. Powerful computers and numerical methods are now available for solving the flow equations, but the simulation of turbulence effects which are nearly always important in practice, is still in an unsatisfactory state and introduces considerable uncertainities in the accuracy of CFD calculations. These and other aspects of turbulence modelling and measurements are dealt with in detail by experts in the field. The resulting book is an up-to-date review of the most recent research in this exciting area.
