Download or read book Direct Laser Fabrication of Titanium Alloy Powders written by Jing Liang and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additive Manufacturing of Titanium Alloys written by Bhaskar Dutta and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry. - Includes coverage of the fundamentals of microstructural evolution in titanium alloys - Introduces readers to the various Additive Manufacturing Technologies, such as Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) - Looks at the future of Titanium Additive Manufacturing - Provides a complete review of the science, technology, and applications of Titanium Additive Manufacturing (AM)
Download or read book Titanium Powder Metallurgy and Additive Manufacturing written by Huiping Tang and published by Trans Tech Publications Ltd. This book was released on 2018-05-11 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy of titanium and titanium alloys has been increasingly attracting attention of engineers and researchers for over four decades and the 4th International Conference on Titanium Powder Metallurgy & Additive Manufacturing (PMTi 2017, Xian, China, from 8 to 10 September 2017) was an event that promoted the progress in this area of the materials science and processing technologies.
Download or read book Direct Laser Fabrication of a Burn Resistant Titanium Alloy written by Robert John Sharman and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Metal Deposition Process of Metals Alloys and Composite Materials written by Rasheedat Modupe Mahamood and published by Springer. This book was released on 2017-09-05 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the industrial potential and explains the physics behind laser metal deposition (LMD) technology. It describes the laser metal deposition (LMD) process with the help of numerous diagrams and photographs of real-world process situations, ranging from the fabrication of parts to the repair of existing products, and includes case studies from current research in this field. Consumer demand is moving away from standardized products to customized ones, and to remain competitive manufacturers require manufacturing processes that are flexible and able to meet consumer demand at low cost and on schedule. Laser metal deposition (LMD) is a promising alternative manufacturing process in this context. This book enables researchers and professionals in industry gain a better understanding of the LMD process, which they can then use in real-world applications. It also helps spur on further innovations.
Download or read book Recommended Values of Thermophysical Properties for Selected Commercial Alloys written by K. C. Mills and published by Woodhead Publishing. This book was released on 2002 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Application of Direct Metal Laser Sintering of Titanium Alloy Powder in Fabricating Components of Aircraft Structures written by and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. - Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy - Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. - Includes a critical review of the current key fundamental and technical issues of Ti PM. - Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys
Download or read book Development of a Burn resistant Titanium Alloy Through the Laser Deposition of Elementally Blended Powders written by David Jeffrey Bryan and published by . This book was released on 2002 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Advances in science and industry have always been limited by material selection. Thus, there is a constant push toward stronger, lighter, and cheaper materials. Titanium and its alloys are amongst the most promising because of their high strength to weight ratio. The problem with titanium is that it is difficult and expensive to process. The production of near net-shaped parts by direct laser deposition could result in a significant reduction in weight as well as in manufacturing costs of complex components. Furthermore, direct laser deposition techniques have a number of other potential benefits, including the ability to deposit of graded compositions, elemental blends, composites, and advanced alloys. Burn resistant titanium alloys, such as Ti-25V-15Cr-2Al-0.2C, are one such advanced alloy system. The deposition and characterization of the Ti-25V-15Cr-2Al-0.2C alloy from elementally blended powders was the focus of this study. A series of binary, ternary, and quaternary were deposited and characterized to study the fundamental processing involved with the deposition of the Ti-25V-15Cr-2Al-0.2C alloy. The reflectivity issue associated with the processing of elemental aluminum was addressed in the first series of deposits. Porosity difficulties associated with the processing of vanadium powder were overcome by increasing the laser power and decreasing the layer spacing. Compositional inaccuracies resulting from the simultaneous deposition of chromium and aluminum powders were overcome through the addition of elemental carbon as well as a slight modification to the input powder composition. The totality of these results gave a series of processing parameters and an input composition that accurately produced the desired composition upon deposition via the LENS TM process. Microstructural characterization of the resultant deposits was performed using a wide variety of techniques. The microstructure of an arc-melted sample was composed of a ß matrix and approximately 2 volume percent of TiC, while the LENS TM deposited samples had aß matrix and 8 volume percent of TiC and another unidentified carbide. The unidentified carbide is thought to be a substoichiometric carbide that would also account for the large increase in carbide volume fraction seen in the LENS TM deposit. The a phase was not observed in any of the Ti-25V-15Cr-2Al-0.2C samples. Heat-treatments were carried out in order to evaluate the thermal stability of the deposits. The results indicate that the alloy was very stable with a grain size close to 50 μm, a stable volume fraction of carbide of approximately 7%, and a Vickers microhardness between 380 and 410. The addition of erbium to the composition was found to have little effect on the deposit except after solution heat treatment. The erbium precipitated out as a fine dispersion of Er203, between 0.3 and 0.8 volume percent, which was lightly coupled to the carbides.
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Laser Additive Manufacturing written by Milan Brandt and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing: Materials, Design, Technologies, and Applications provides the latest information on this highly efficient method of layer-based manufacturing using metals, plastics, or composite materials. The technology is particularly suitable for the production of complex components with high precision for a range of industries, including aerospace, automotive, and medical engineering. This book provides a comprehensive review of the technology and its range of applications. Part One looks at materials suitable for laser AM processes, with Part Two discussing design strategies for AM. Parts Three and Four review the most widely-used AM technique, powder bed fusion (PBF) and discuss other AM techniques, such as directed energy deposition, sheet lamination, jetting techniques, extrusion techniques, and vat photopolymerization. The final section explores the range of applications of laser AM. Provides a comprehensive one-volume overview of advances in laser additive manufacturing Presents detailed coverage of the latest techniques used for laser additive manufacturing Reviews both established and emerging areas of application
Download or read book Additive Manufacturing of Metals written by John O. Milewski and published by Springer. This book was released on 2017-06-28 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This engaging volume presents the exciting new technology of additive manufacturing (AM) of metal objects for a broad audience of academic and industry researchers, manufacturing professionals, undergraduate and graduate students, hobbyists, and artists. Innovative applications ranging from rocket nozzles to custom jewelry to medical implants illustrate a new world of freedom in design and fabrication, creating objects otherwise not possible by conventional means. The author describes the various methods and advanced metals used to create high value components, enabling readers to choose which process is best for them. Of particular interest is how harnessing the power of lasers, electron beams, and electric arcs, as directed by advanced computer models, robots, and 3D printing systems, can create otherwise unattainable objects. A timeline depicting the evolution of metalworking, accelerated by the computer and information age, ties AM metal technology to the rapid evolution of global technology trends. Charts, diagrams, and illustrations complement the text to describe the diverse set of technologies brought together in the AM processing of metal. Extensive listing of terms, definitions, and acronyms provides the reader with a quick reference guide to the language of AM metal processing. The book directs the reader to a wealth of internet sites providing further reading and resources, such as vendors and service providers, to jump start those interested in taking the first steps to establishing AM metal capability on whatever scale. The appendix provides hands-on example exercises for those ready to engage in experiential self-directed learning.
Download or read book Powder Metallurgy of Titanium written by Ma Qian and published by Trans Tech Publications Ltd. This book was released on 2012-08-24 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference upon which this work is based fully achieved its objectives and turned out to be the largest international gathering dedicated solely to the topic of titanium processing via powder metallurgy. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 50 peer-reviewed papers are grouped into 8 chapters: PM titanium alloy design and processing developments; Powder Production; Effect of Impurities; Metal Injection Moulding of Titanium; Biomedical Titanium Alloys; Titanium Composites; Forging and Equal-Channel Angular Pressing of Titanium; Laser Cladding, Welding, Slip Casting and Other Processing Developments.
Download or read book Book of Abstracts from the 7th International Conference on Powder Metallurgy and Additive Manufacturing of Titanium PMTi2024 written by Elena Gordo Odériz and published by Trans Tech Publications Ltd. This book was released on 2024-09-03 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 7th edition of the International Conference on Powder Metallurgy and Additive Manufacturing of Titanium, PMTi2024, is taking place for the first time in Spain after a successful series of previous conferences held in Australia, New Zealand, Germany, China, the United States and Canada. The aim of the conference is to gather researchers and professionals on the processing, design and application of titanium and its alloys fabricated by powder metallurgy (PM) and additive manufacturing (AM) technologies. For three days, attendants will have the opportunity to discuss topics from powder production and characterisation to applications through different processing routes. Besides Ti alloys, titanium aluminides and Ti-based metal matrix composites are also considered, as well as recycling and sustainability.
Download or read book Laser Additive Manufacturing of High Performance Materials written by Dongdong Gu and published by Springer. This book was released on 2015-04-21 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book entitled “Laser Additive Manufacturing of High-Performance Materials” covers the specific aspects of laser additive manufacturing of high-performance new materials components based on an unconventional materials incremental manufacturing philosophy, in terms of materials design and preparation, process control and optimization and theories of physical and chemical metallurgy. This book describes the capabilities and characteristics of the development of new metallic materials components by laser additive manufacturing process, including nanostructured materials, in situ composite materials, particle reinforced metal matrix composites, etc. The topics presented in this book, similar as laser additive manufacturing technology itself, show a significant interdisciplinary feature, integrating laser technology, materials science, metallurgical engineering and mechanical engineering. This is a book for researchers, students, practicing engineers and manufacturing industry professionals interested in laser additive manufacturing and laser materials processing. Dongdong Gu is a Professor at College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics (NUAA), PR China.
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.
