Download or read book Dilute Magnetic Semiconductors Based on Gan and Zno written by Tom Kammermeier and published by Sudwestdeutscher Verlag Fur Hochschulschriften AG. This book was released on 2010-05 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two wide band gap dilute magnetic semiconductors (DMS) Gd: GaN and Co: ZnO are among the most favored materials for spintronic applications. Despite intense research efforts during the last years, the origin of the magnetic order is still under debate. This work reports structural and magnetic investigations on these DMS materials employing several complementary techniques. The X-ray linear dichroism (XLD) has been used to gain element-specific insight into the local structure of dopants and cations. X-ray diffraction (XRD) has resulted in information about the global structural properties. Magnetic characterization by superconducting quantum interference device (SQUID) has been complemented by electron spin resonance (ESR) and X-ray magnetic circular dichroism (XMCD). This compilation of different techniques has yield new insight in the complex magnetic behavior of these wide band gap dilute magnetic semiconductor

Download or read book Structural and Magnetic Investigation of Dilute Magnetic Semiconductors Based on GaN and ZnO written by Tom Kammermeier and published by . This book was released on 2010 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Zinc Oxide written by Hadis Morkoç and published by John Wiley & Sons. This book was released on 2008-12-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first systematic, authoritative and thorough treatment in one comprehensive volume presents the fundamentals and technologies of the topic, elucidating all aspects of ZnO materials and devices. Following an introduction, the authors look at the general properties of ZnO, as well as its growth, optical processes, doping and ZnO-based dilute magnetic semiconductors. Concluding sections treat bandgap engineering, processing and ZnO nanostructures and nanodevices. Of interest to device engineers, physicists, and semiconductor and solid state scientists in general.

Download or read book Oxide and Nitride Semiconductors written by Takafumi Yao and published by Springer Science & Business Media. This book was released on 2009-03-20 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a unique book devoted to the important class of both oxide and nitride semiconductors. It covers processing, properties and applications of ZnO and GaN. The aim of this book is to provide the fundamental and technological issues for both ZnO and GaN.

Download or read book First Principle Vs Experimental Design of Diluted Magnetic Semiconductors written by Omar Mounkachi and published by Nova Science Publishers. This book was released on 2018 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent discoveries have given rise to a new class of electronics known as "spin electronics" or "spintronics," which uses the electron spin rather than its charge to create polarized currents. Spintronics is currently experiencing an extraordinary development with the manufacture of nanoscale devices based on ferromagnetic materials and semiconductors. Their applications are numerous, ranging from recording, electronics, and optoelectronics to quantum information. Spintronics is a new generation of electronics that has brought and continues to bring a lot of progress to information storage; this is due to the discovery of new materials with new functionalities and multiple applications. The discovery of giant magnetoresistance (GMR) in 1988 by Albert Fert and Peter Grünberg (receiver of the Nobel Prize in Physics in 2007) is considered a starting point of spintronics. GMR is based on the variation of the electric current in the presence of a magnetic field. The spintronics has made important contributions to the miniaturization desired for electronics; it uses nanometric components for processing and storing information. However, the limits of miniaturization on a nanometric scale are known, and it is imperative to develop new ways and new materials to exceed those limits. The most desired properties for these materials are high spin polarization, modular magnetic properties by an electric field and a long lifetime of the spin polarization. Among the new promising materials, we cite the following: Diluted magnetic semiconductors, which give new magnetic properties of conventional semiconductors, functional oxides (including the semi-metals and multiferroic metals) and organic semiconductors. The main theoretical challenge in this area is to understand how the macroscopic magnetic behavior observed results from interactions of a large number of degrees of microscopic freedom. In these systems the disorder is an essential parameter of magnetic phenomena, and due to random locations of impurity atoms it can lead to a total physical difference from the observed absence. There has been considerable recent advances in the design of these materials as diluted magnetic semiconductors (DMS, or diluted magnetic semiconductors), and a number of semiconductors were investigated as II-VI group and III-V group doped compounds, with transition metals substituting their original cations. There are several different theoretical approaches to study these magnetic materials. The ab-initio approach starts from the Schrödinger equation to simulate a given material. Such an approach is essential to determine the parameters and microscopic properties of such a system. In this book, the authors analyzed the electronic structure of magnetic semiconductors diluted in the case of ZnO, GaN, SnO2, TiO2, MgH2, EuO and EuN doped RENs (RE=GdN, DyN and HoN). The authors focused on magnetic, optical and exchange mechanisms which control the ferromagnetism in these systems. The purpose of this book is to propose some ideas to answer the most important question in material science for semiconductor spintronics, primarily considering how room-temperature ferromagnetism in DMS can be realized. Additionally, the correlation between first principle and experimental design to see how properties of yet-to-be-synthesized materials can be predicted is discussed.

Download or read book Nanostructured Metal Oxides and Devices written by M. K. Jayaraj and published by Springer Nature. This book was released on 2020-04-16 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book primarily covers the fundamental science, synthesis, characterization, optoelectronic properties, and applications of metal oxide nanomaterials. It discusses the basic aspects of synthetic procedures and fabrication technologies, explains the related experimental techniques and also elaborates on the current status of nanostructured oxide materials and related devices. Two major aspects of metal oxide nanostructures – their optical and electrical properties – are described in detail. The first five chapters focus on the optical characteristics of semiconducting materials, especially metal oxides at the nanoscale. The following five chapters discuss the electrical properties observed in metal oxide-based semiconductors and the status quo of device-level developments in a variety of applications such as sensors, transistors, dilute magnetic semiconductors, and dielectric materials. The basic science and mechanism behind the optoelectronic phenomena are explained in detail, to aid readers interested in the structure–property symbiosis in semiconducting nanomaterials. In short, the book offers a valuable reference guide for researchers and academics in the areas of material science and semiconductor technology, especially nanophotonics and electronics.

Download or read book Introduction to the Physics of Diluted Magnetic Semiconductors written by Jan A. Gaj and published by Springer Science & Business Media. This book was released on 2011-01-12 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: As materials whose semiconducting properties are influenced by magnetic ions, DMSs are central to the emerging field of spintronics. This volume focuses both on basic physical mechanisms (e.g. carrier-ion and ion-ion interactions), and resulting phenomena.

Download or read book Zinc Oxide Materials for Electronic and Optoelectronic Device Applications written by Cole W. Litton and published by John Wiley & Sons. This book was released on 2011-06-07 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zinc Oxide (ZnO) powder has been widely used as a white paint pigment and industrial processing chemical for nearly 150 years. However, following a rediscovery of ZnO and its potential applications in the 1950s, science and industry alike began to realize that ZnO had many interesting novel properties that were worthy of further investigation. ZnO is a leading candidate for the next generation of electronics, and its biocompatibility makes it viable for medical devices. This book covers recent advances including crystal growth, processing and doping and also discusses the problems and issues that seem to be impeding the commercialization of devices. Topics include: Energy band structure and spintronics Fundamental optical and electronic properties Electronic contacts of ZnO Growth of ZnO crystals and substrates Ultraviolet photodetectors ZnO quantum wells Zinc Oxide Materials for Electronic and Optoelectronic Device Applications is ideal for university, government, and industrial research and development laboratories, particularly those engaged in ZnO and related materials research.

Download or read book Diluted Magnetic Semiconductors written by Mukesh Kumar Jain and published by World Scientific. This book was released on 1991 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review volume presents both basic and applied aspects of diluted magnetic semiconductors (DMS). The term DMS applies generally to semiconductors in which a fraction of its constituent ions are replaced by magnetic ions. This book is only the second to review DMS materials. It presents a detailed treatment of the current state of knowledge of the established properties of DMS in the form of single crystals, quantum wells and superlattices. It also brings together recent work on new DMS materials and presents discussions on a wide range of possible DMS applications.

Download or read book Synthesis of Doped ZnO Based Bulk Dilute Magnetic Semiconductors and Their Nanophase Thin Films Using Pulsed Laser Ablation written by Shumaila Karamat and published by . This book was released on 2011 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Molecular Beam Epitaxy Growth and Characterization of ZnO based Layers and Heterostructures written by Abdelhamid Abdelrehim Mahmoud Elshaer and published by Cuvillier Verlag. This book was released on 2008 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Based Thin Films for Electronics written by Klaus Wetzig and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date handbook covers the main topics of preparation, characterization and properties of complex metal-based layer systems. The authors -- an outstanding group of researchers -- discuss advanced methods for structure, chemical and electronic state characterization with reference to the properties of thin functional layers, such as metallization and barrier layers for microelectronics, magnetoresistive layers for GMR and TMR, sensor and resistance layers. As such, the book addresses materials specialists in industry, especially in microelectronics, as well as scientists, and can also be recommended for advanced studies in materials science, analytics, surface and solid state science.

Download or read book Handbook of Nitride Semiconductors and Devices Materials Properties Physics and Growth written by Hadis Morkoç and published by John Wiley & Sons. This book was released on 2009-07-30 with total page 1311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volumes of this handbook treat the fundamentals, technology and nanotechnology of nitride semiconductors with an extraordinary clarity and depth. They present all the necessary basics of semiconductor and device physics and engineering together with an extensive reference section. Volume 1 deals with the properties and growth of GaN. The deposition methods considered are: hydride VPE, organometallic CVD, MBE, and liquid/high pressure growth. Additionally, extended defects and their electrical nature, point defects, and doping are reviewed.

Download or read book Magnetic Nanoparticles and Polymer Nanocomposites written by Imran Khan and published by Elsevier. This book was released on 2024-03-20 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Nanoparticles and Polymer Nanocomposites: Fundamentals and Biological, Environmental and Energy Applications focuses on the manufacturing and design of innovative magnetic polymeric nanocomposite materials for a broad range of different applications. These materials have truly outstanding and sustainable properties unlike other composites because they are combined with both organic (polymer matrix) and inorganic (semiconductor nanoparticles) materials to form a sustainable composite material. The book's focus is on magnetic semiconductor and polymer nanocomposites made from bioresorbable and biocompatible polymers, modified with magnetic nanoparticles. This book provides detailed knowledge on the modern research application of magnetic semiconductor and polymeric nanocomposites that have tremendous commercial value. In addition, these nanocomposite materials are also a good source for the renewable energy-based industry. - Covers magnetic nanoparticles and polymer nanocomposites in environmental, renewable energy, water treatment, energy storage and biomedical applications - Provides fundamental knowledge on design, synthesis, properties investigation, applications and manufacturing - Emphasizes recent advances on magnetic nanoparticles and polymer nanocomposites

Download or read book Handbook of Crystal Growth written by Tom Kuech and published by Elsevier. This book was released on 2014-11-02 with total page 1384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume IIIA Basic TechniquesHandbook of Crystal Growth, Second Edition Volume IIIA (Basic Techniques), edited by chemical and biological engineering expert Thomas F. Kuech, presents the underpinning science and technology associated with epitaxial growth as well as highlighting many of the chief and burgeoning areas for epitaxial growth. Volume IIIA focuses on major growth techniques which are used both in the scientific investigation of crystal growth processes and commercial development of advanced epitaxial structures. Techniques based on vacuum deposition, vapor phase epitaxy, and liquid and solid phase epitaxy are presented along with new techniques for the development of three-dimensional nano-and micro-structures.Volume IIIB Materials, Processes, and TechnologyHandbook of Crystal Growth, Second Edition Volume IIIB (Materials, Processes, and Technology), edited by chemical and biological engineering expert Thomas F. Kuech, describes both specific techniques for epitaxial growth as well as an array of materials-specific growth processes. The volume begins by presenting variations on epitaxial growth process where the kinetic processes are used to develop new types of materials at low temperatures. Optical and physical characterizations of epitaxial films are discussed for both in situ and exit to characterization of epitaxial materials. The remainder of the volume presents both the epitaxial growth processes associated with key technology materials as well as unique structures such as monolayer and two dimensional materials.Volume IIIA Basic Techniques - Provides an introduction to the chief epitaxial growth processes and the underpinning scientific concepts used to understand and develop new processes. - Presents new techniques and technologies for the development of three-dimensional structures such as quantum dots, nano-wires, rods and patterned growth - Introduces and utilizes basic concepts of thermodynamics, transport, and a wide cross-section of kinetic processes which form the atomic level text of growth process Volume IIIB Materials, Processes, and Technology - Describes atomic level epitaxial deposition and other low temperature growth techniques - Presents both the development of thermal and lattice mismatched streams as the techniques used to characterize the structural properties of these materials - Presents in-depth discussion of the epitaxial growth techniques associated with silicone silicone-based materials, compound semiconductors, semiconducting nitrides, and refractory materials

Download or read book Materials for Devices written by Sam Zhang and published by CRC Press. This book was released on 2022-09-30 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: From everyday applications to the rise of automation, devices have become ubiquitous. Specific materials are employed in specific devices because of their particular properties, including electrical, thermal, magnetic, mechanical, ferroelectric, and piezoelectric. Materials for Devices discusses materials selection for optimal application and highlights current materials developments in gas sensors, optical devices, mechanoelectrical devices, and medical and biological devices. Explains how to select the right material for the right device Includes 2D materials, thin films, smart piezoelectric films, and more Presents details on organic solar cells Describes thin films in sensors, actuators, and LEDs Covers thin films and elastic polymers in biomedical devices Discusses growth and characterization of intrinsic magnetic topological insulators This work is aimed at researchers, technologists, and advanced students in materials and electrical engineering and related fields who are interested in developing sensors or devices.

Download or read book Rare Earth and Transition Metal Doping of Semiconductor Materials written by Volkmar Dierolf and published by Woodhead Publishing. This book was released on 2016-01-23 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rare Earth and Transition Metal Doping of Semiconductor Material explores traditional semiconductor devices that are based on control of the electron's electric charge. This book looks at the semiconductor materials used for spintronics applications, in particular focusing on wide band-gap semiconductors doped with transition metals and rare earths. These materials are of particular commercial interest because their spin can be controlled at room temperature, a clear opposition to the most previous research on Gallium Arsenide, which allowed for control of spins at supercold temperatures. Part One of the book explains the theory of magnetism in semiconductors, while Part Two covers the growth of semiconductors for spintronics. Finally, Part Three looks at the characterization and properties of semiconductors for spintronics, with Part Four exploring the devices and the future direction of spintronics. - Examines materials which are of commercial interest for producing smaller, faster, and more power-efficient computers and other devices - Analyzes the theory behind magnetism in semiconductors and the growth of semiconductors for spintronics - Details the properties of semiconductors for spintronics