Download or read book DIII D Power Supply Design and Development written by and published by . This book was released on 1995 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the DIII-D power supply system with information details concerning the configuration, power ratings, acquisition costs, and cost scaling relevant to the design of ITER and other tokamaks is presented. The power supplies for the DIII-D tokamak were installed and commissioned during the late 1970's and the beginning of the 1980's. Several upgrades have been implemented during the last two years to solve increasing reliability problems encountered as the equipment aged, to provide enhanced operational flexibilities, and to enable operation at the higher power levels needed to provide experimental data relevant to the ITER and TPX design activities. These upgrades ranged from redesign of the power supply control systems to the replacement of vacuum circuit breakers which had become unreliable in service. A new interlock and protection system has also been implemented using the latest programmable logic controllers (PLC) and computer technology. These upgrades have been highly successful and are described to provide insight to many issues in the specification of high power converters. Power supply models used in the design of the DIII-D Plasma Control System are also described along with model verification test data. These models are being used in the development of a new advanced plasma control system for the DIII-D tokamak. Recent operational experience and results are presented.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book An Overview of the DIII D Program written by and published by . This book was released on 1996 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DIII-D program focuses on developing fusion physics in an integrated program of tokamak concept improvement. The intent is both to support the present ITER physics R and D and to develop more efficient concepts for the later phases of ITER and eventual power plants. Progress in this effort can be best summarized by recent results for a diverted deuterium discharge with negative central shear which reached a performance level of Q{sub DT} = 0.32. The ongoing development of the tools needed to carry out this program of understanding and optimization continues to be crucial to its success. Control of the plasma cross-sectional shape and the internal distributions of plasma current, density, and rotation has been essential to optimizing plasma performance. Advanced divertor concepts provide edge power and particle control for future devices such as ITER and provide techniques to help manage the edge power and particle flows for advanced tokamak concepts. New divertor diagnostics and improved modeling are developing excellent divertor understanding. Many of the plasma physics issues being posed by ITER are being addressed. Scrapeoff layer power flow is being characterized to provide an accurate basis for the design of reactor devices. Ongoing studies of the density limit focus on identifying ways in which ITER can achieve the required densities in excess of the Greenwald limit. Better understanding of disruptions is crucial to the design of future reactors.
Download or read book Practical Switching Power Supply Design written by Marty Brown and published by Academic Press. This book was released on 1990-03-28 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why use switching power supplies? -- How a switching power supply works -- A walk through a representative switching power supply -- Switching power supply topologies -- Semiconductors used in a switching power supply -- The magnetic components within a switching power supply -- Cross-regulation of the outputs -- Protection -- Miscellaneous topics -- Closing the loop-feedback and stability -- Resonant converters -- an introduction -- Switching power supply design examples.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyklopedic Dictionary of Physics written by and published by . This book was released on 1961 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy and Water Development Appropriations for 1996 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 1995 with total page 1248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developing Models for the DIII D Boundary Plasma written by and published by . This book was released on 2005 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of the comprehensive codes used to study the boundary region of the DIII-D tokamak has been done in parallel with improvement of the diagnostics of this important region of the plasma. These codes have been used to interpret the diagnostic data and assist in design of improved divertor configurations. The development of codes used for analysis on DIII-D is described briefly. Model validation by comparing with the extensive DIII-D boundary region diagnostic data is also discussed.
Download or read book Diagnostics for Experimental Thermonuclear Fusion Reactors written by Giuseppe Gorini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of proceedings collects the papers presented at the Workshop on Diagnostics for ITER, held at Villa Monastero, Varenna (Italy), from August 28 to September 1, 1995. The Workshop was organised by the International School of Plasma Physics "Piero Caldirola. " Established in 1971, the ISPP has organised over fifty advanced courses and workshops on topics mainly related to plasma physics. In particular, courses and workshops on plasma diagnostics (previously held in 1975, 1978, 1982, 1986, and 1991) can be considered milestones in the history of this institution. Looking back at the proceedings of the previous meetings in Varenna, one can appreciate the rapid progress in the field of plasma diagnostics over the past 20 years. The 1995 workshop was co-organised by the Istituto di Fisica del Plasma of the National Research Council (CNR). In contrast to previous Varenna meetings on diagnostics, which have covered diagnostics in present-day tokamaks and which have had a substantial tutorial component, the 1995 workshop concentrated specifically on the problems and challenges of ITER diagnostics. ITER (the International Thennonuclear Experimental Reactor, a joint venture of Europe, Japan, Russia, and the United States, presently under design) will need to measure a wide range of plasma parameters in order to reach and sustain high levels of fusion power. A list of the measurement requirements together with the parameter ranges, target measurement resolutions, and accuracies provides the starting point for selecting a list of candidate diagnostic systems.
Download or read book Energy and Water Development Appropriations for 2011 Part 3 February 2010 111 2 Hearings written by and published by . This book was released on 2010 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Technology 1992 written by C. Ferro and published by Elsevier. This book was released on 2013-10-22 with total page 1894 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the biennial series of symposia on Fusion Technology organized by the European Fusion Laboratories, is the exchange of information on the design, construction and operation of fusion experiments and on the technology being developed for the next-step devices and fusion reactors. The coverage of the volume includes the technological aspects of fusion reactors in relation to new developments, thus forming a guideline for the definition of future work. These proceedings comprise three volumes and contain both the invited lectures and contributed papers presented at the symposium, which was attended by 569 participants from around the globe. The 343 papers, including 12 invited papers, characterise the increasing interest of industry in the fusion programme, giving a broad and current overview on the progress and trends fusion technology is experiencing now, as well as indicating the future for fusion devices.
Download or read book Energy and Water Development Appropriations for 2011 Dept of Energy fiscal year 2011 justifications cont written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2010 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy and Water Development Appropriations for Fiscal Year 1996 written by United States. Congress. Senate. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 1996 with total page 1286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development of a Closed Loop Simulator for Poloidal Field Control in DIII D written by and published by . This book was released on 1999 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of a model-based simulator of the DIII-D poloidal field system is presented. The simulator is automatically configured to match a particular DIII-D discharge circuit. The simulator can be run in a data input mode, in which prior acquired DIII-D shot data is input to the simulator, or in a stand-alone predictive mode, in which the model operates in closed loop with the plasma control system. The simulator is used to design and validate a multi-input-multi-output controller which has been implemented on DIII-D to control plasma shape. Preliminary experimental controller results are presented.
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1989 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
Download or read book Energy and Water Development Appropriations for Fiscal Year 1987 Nondepartmental witnesses written by United States. Congress. Senate. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 1986 with total page 1288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy and Water Development Appropriations for Fiscal Year 1987 written by United States. Congress. Senate. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 1986 with total page 1320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
