Download or read book DIII D Data for Modeling the Scrape off layer Plasma written by and published by . This book was released on 1989 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are in the process of assembling a database of edge and divertor plasma parameters suitable for use in benchmarking tious 2D models of the scrape-off- layer (SOL) plasma. Also, we are using the Braams B2 code to derive transport coefficients for the edge plssma. In parallel, work is starting on an upgrade to the B2 code that includes padlel current flow and EXB drifts. These efforts are directed at increasing the confidence level of models of the tokamak edge plasma so that we can predict the effect of planned upgrades to DIII-D (e.g., the Advanced Divertor Program) and the performance of next generation machines such as CIT or ITER, where initial design studies show that plasma conditions at the divertor targets can have a large impact on the lifetime and cost of the machine. This report summarizes our recent progress in characterizing the DIII-D SOL plasma and in modeling these data with the the B2 code. Section I contains a brief description of the diagnostics available for characterizing the SOL plasma. In Section II we present our measurements of the SOL parameters for H-mode plasmas. This includes data showing how the divertor plasma parameters (n{sub e}(r), T{sub e}(r), and Q(r)) vary from ohmic to L-mode to H-mode, and power balance for quasi-stationary H-mode plasmas. Section III covers divertor-target heat-flux asymmetries for double and single null operation with forward and reversed toroidal field. In Section IV we show the scaling of L-mode parameters with neutral beam power, and Section V concludes with a summary of the results obtained from the Braams B2 SOL simulation code.
Download or read book UEDGE and DEGAS Modeling of the DIII D Scrape off Layer Plasma Revision 1 written by and published by . This book was released on 1994 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper presents work to develop benchmarked theoretical models of scrape-off-layer (SOL) characteristics in diverted tokamaks by comparing shot simulations using the UEDGE plasma fluid and DEGAS neutral transport codes to measurements of the DIII-D SOL plasma. The experimental data include the radial profiles of n{sub e} T{sub e}, and T{sub i}, the divertor exhaust power, the intensity of H{sub {alpha}} emission, and profiles of the radiated power. A very simple model of the anomalous perpendicular transport rates produces consistency between the calculated and measured radial profiles of the divertor power, and of the midplane densities and temperatures. Experimentally, the measured exhaust power is now 80--90% of the input power. The simulated peak power on the outer leg of the divertor floor is now within 20% of the measured power. Various sensitivities of these comparisons to model assumptions are described. Finally, these benchmarked models have been used to examine the effects of various baffle configurations for the Radiative Divertor Upgrade in DIII-D.
Download or read book Modeling The Effect of Drifts on the Edge Scrape Off Layer and Divertor Plasma in DIII D written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulations of plasmas with a DIII-D shape indicate plasma drifts are important at power levels near the L- to H-mode plasma transition. In addition to enhancing plasma flows in the divertor region, drifts are found to play a key role in establishing highly sheared radial electric fields in the edge of the confined plasma, for the physics of the high confinement operating mode (H-mode). Measurements of the plasma structure in the vicinity of the X-point of DIII-D indicate the importance of drifts on plasma flow between the scrape-off layer (SOL) and closed field lines. The large electric fields provide large flows around the X-point, and these are conjectured to play a role in the transition from L- to H-mode confinement. These results indicate the relevance of modeling the edge and SOL plasmas of present tokamak devices using models which include E x B, (nabla)B, and pressure gradient drifts. The results of simulation of specific DIII-D discharges is reported in this paper. They start with discussion of the simulation of an Ohmic discharge in Section 2, including a study of the effect of varying several operational parameters. Simulation of a higher triangularity L-mode discharge is discussed in Section, and a summary is given in Section 4.
Download or read book UEDGE and DEGAS Modeling of the DIII D Scrape off Layer Plasma written by and published by . This book was released on 1994 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper presents the results of work to develop benchmarked theoretical models of scrape-off-layer (SOL) characteristics in diverted tokamaks by comparing shot simulations using the UEDGE plasma fluid and DEGAS Monte-Carlo neutral particle transport codes to measurements of the DIII-D SOL plasma. The available experimental data include the radial profiles of electron density and temperature, the ion temperature, the divertor exhaust power, the intensity of H{sub {alpha}} emission, and profiles of the radiated power. A very simple model of the anomalous perpendicular transport rates produces consistency between the calculated and measured radial profiles of the divertor power, and of the midplane densities and temperatures. Experimentally, measured exhaust power is now typically 80--90% of the input power. The simulated peak power on the outer leg of the divertor floor is now within about 20% of the measured power. Various sensitivities of the simulation and measurement comparisons to model assumptions are described. Finally, these benchmarked models have been used to examine the effects of various baffle configurations for the Radiative Divertor Upgrade in DIII-D.
Download or read book The Plasma Boundary of Magnetic Fusion Devices written by P.C Stangeby and published by CRC Press. This book was released on 2000-01-01 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Plasma Boundary of Magnetic Fusion Devices introduces the physics of the plasma boundary region, including plasma-surface interactions, with an emphasis on those occurring in magnetically confined fusion plasmas. The book covers plasma-surface interaction, Debye sheaths, sputtering, scrape-off layers, plasma impurities, recycling and control, 1D and 2D fluid and kinetic modeling of particle transport, plasma properties at the edge, diverter and limiter physics, and control of the plasma boundary. Divided into three parts, the book begins with Part 1, an introduction to the plasma boundary. The derivations are heuristic and worked problems help crystallize physical intuition, which is emphasized throughout. Part 2 provides an introduction to methods of modeling the plasma edge region and for interpreting computer code results. Part 3 presents a collection of essays on currently active research hot topics. With an extensive bibliography and index, this book is an invaluable first port-of-call for researchers interested in plasma-surface interactions.
Download or read book Enhanced Scrape off Layer Plasma in DIII D Double null Discharges written by and published by . This book was released on 1994 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this paper, the authors examine a denser and broader scrape-off layer (SOL) plasma, first seen in VH mode, in the DIII-D tokamak. The enhanced SOL appears in many types of double-null (DN) discharges and is not a property of VH-mode only. The DN enhanced SOL density and temperature profiles exhibit a 5--6 cm broad profile outside the separatrix. For DN and single-null (SN) boundary geometry with similar core plasma conditions, the enhanced SOL is only observed in high triangularity discharges. The origin of the enhanced SOL is, however, not yet understood.
Download or read book Benchmarking UEDGE with DIII D Data written by and published by . This book was released on 1993 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comparisons between a 2-D fluid simulation of the scrape-off-layer (SOL) plasma of a diverted tokamak and experimental data from the DIII-D are shown. It is concluded that a simple diffusive model for perpendicular transport is consistent with the data. Discrepancies in the simulation suggest that impurity radiation may be playing a significant role in the experiment, and that further work is required to understand hydrogen recycling at the divertor.
Download or read book Far Scrape Off Layer and Near Wall Plasma Studies in DIII D written by J. Watkins and published by . This book was released on 2004 with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt: Far scrape-off layer (SOL) plasma parameters in DIII-D depend strongly on the discharge density and confinement regime. In L-mode, cross-field transport increases with the average discharge density and elevates the far SOL density, thus increasing plasma-wall contact. Far SOL density near the low field side (LFS) of the main chamber wall also increases with decreasing plasma current and with decreasing outer wall gap. In H-mode, between edge localized modes (ELMs), plasma-wall contact is weaker than in L-mode. During ELMs plasma fluxes to the LFS wall increase to, or above the L-mode levels. A large fraction of the net cross-field fluxes is convected through the SOL by large amplitude intermittent transport events. In high density L-mode and during ELMs in H-mode, intermittent events propagate all the way to the LFS wall and may cause sputtering.
Download or read book Modeling and Analysis of the DIII D Tokamak Scrape off Layer and Divertor written by Quang Thanh Nguyen and published by . This book was released on 1995 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scrape Off Layer Transport and Deposition Studies in DIII D written by S. Allen and published by . This book was released on 2006 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trace {sup 13}CH{sub 4} injection experiments into the main scrape-off layer of low density L-mode and high-density H-mode plasmas have been performed in the DIII-D tokamak [Luxon{_}NF02] to mimic the transport and deposition of carbon arising from a main chamber sputtering source. These experiments indicated entrainment of the injected carbon in plasma flow in the main SOL, and transport toward the inner divertor. Ex-situ surface analysis showed enhanced {sup 13}C surface concentration at the corner formed by the divertor floor and the angled target plate of the inner divertor in L-mode; in H-mode, both at the corner and along the surface bounding the private flux region inboard of the outer strike point. Interpretative modeling was made consistent with these experimental results by imposing a parallel carbon ion flow in the main SOL toward the inner target, and a radial pinch toward the separatrix. Predictive modeling carried out to better understand the underlying plasma transport processes suggests that the deuterium flow in the main SOL is related to the degree of detachment of the inner divertor leg. These simulations show that carbon ions are entrained with the deuteron flow in the main SOL via frictional coupling, but higher charge state carbon ions may be suspended upstream of the inner divertor X-point region due to balance of the friction force and the ion temperature gradient.
Download or read book Coupled Two dimensional Edge Plasma and Neutral Gas Modeling of Tokamak Scrape off layers written by and published by . This book was released on 1992 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this study is to devise a detailed description of the tokamak scrape-off-layer (SOL), which includes the best available models of both the plasma and neutral species and the strong coupling between the two in many SOL regimes. A good estimate of both particle flux and heat flux profiles at the limiter/divertor target plates is desired. Peak heat flux is one of the limiting factors in determining the survival probability of plasma-facing-components at high power levels. Plate particle flux affects the neutral flux to the pump, which determines the particle exhaust rate. A technique which couples a two-dimensional (2-D) plasma and a 2-D neutral transport code has been developed (coupled code technique), but this procedure requires large amounts of computer time. Relevant physics has been added to an existing two-neutral-species model which takes the SOL plasma/neutral coupling into account in a simple manner (molecular physics model), and this model is compared with the coupled code technique mentioned above. The molecular physics model is benchmarked against experimental data from a divertor tokamak (DIII-D), and a similar model (single-species model) is benchmarked against data from a pump-limiter tokamak (Tore Supra). The models are then used to examine two key issues: free-streaming-limits (ion energy conduction and momentum flux) and the effects of the non-orthogonal geometry of magnetic flux surfaces and target plates on edge plasma parameter profiles.
Download or read book written by and published by . This book was released on 1976 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Physics and Controlled Nuclear Fusion Research written by and published by . This book was released on 1994 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scrape off Layer Modeling Using Coupled Plasma and Neutral Transport Codes written by Bastiaan Johan Braams and published by . This book was released on 1992 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measuring the Inboard Side Scrape off Layer of DIII D Plasmas Using Swing probes written by Cedric Kar-Wai Tsui and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
