Download or read book Digital Twins for Vessel Life Cycle Service written by Houxiang Zhang and published by Springer. This book was released on 2024-11-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the development of the digital twin of the marine infrastructure in Norway, which will be a significant scientific and operational achievement for the industry, making efficient and safe offshore operations possible. It enables data exchange safely and easily between different sub-systems, modules, and various applications. A complete digital twin ship will be presented in details. Thus, the twin ship can provide an integrated view of the ship’s various physical and behavioral aspects in different stages, and allow simultaneous optimization of functional performance requirements. In addition, it enables advanced control and optimization, e.g., creating more reliable prediction for flexible objectives (time, output, emissions, fuel consumption), and executing day-ahead and long-term planning for operations. More importantly, several related applications and case studies are presented in the end to confirm the effectiveness of the digital twin system. The research work is not only interesting for academia, also for industry.
Download or read book Software Engineering and Formal Methods SEFM 2022 Collocated Workshops written by Paolo Masci and published by Springer Nature. This book was released on 2023-02-10 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the revised selected papers from the four workshops collocated with the 20th International Conference on Software Engineering and Formal Methods, SEFM 2022, held in Berlin, Germany, in September 2022. The 19 full papers presented together with 9 short papers in this volume were carefully reviewed and selected from a total of 39 submissions. The contributions that are collected in this volume have been selected from the presentations at the following workshops: AI4EA 2022: First Berlin Workshop on Artificial Intelligence for Engineering Applications; F-IDE 2022: 7th Workshop on Formal Integrated Development Environment; CoSim-CPS 2022: 6th Workshop on Formal Co-Simulation of Cyber-Physical Systems; CIFMA 2022: 4th International Workshop on Cognition: Interdisciplinary Foundations, Models and Applications.
Download or read book Software Engineering and Formal Methods SEFM 2021 Collocated Workshops written by Antonio Cerone and published by Springer Nature. This book was released on 2022-09-24 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes revised selected papers from the four workshops collocated with the 19th International Conference on Software Engineering and Formal Methods, SEFM 2021, held virtually during December 6–10, 2021. The 21 contributed papers presented in this volume were carefully reviewed and selected from a total of 29 submissions. The book also contains 3 invited talks. SEFM 2021 presents the following four workshops: CIFMA 2021 - 3rd International Workshop on Cognition: Interdisciplinary Foundations, Models and Applications;CoSim-CPS 2021 - 5th Workshop on Formal Co-Simulation of Cyber-Physical Systems;OpenCERT 2021 - 10th International Workshop on Open Community approaches to Education, Research and Technology;ASYDE 2021 - 3rd International Workshop on Automated and verifiable Software sYstem Development. Due to the Corona pandemic this event was held virtually.
Download or read book Leveraging Applications of Formal Methods Verification and Validation Practice written by Tiziana Margaria and published by Springer Nature. This book was released on 2022-10-19 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume set LNCS 13701-13704 constitutes contributions of the associated events held at the 11th International Symposium on Leveraging Applications of Formal Methods, ISoLA 2022, which took place in Rhodes, Greece, in October/November 2022. The contributions in the four-volume set are organized according to the following topical sections: specify this - bridging gaps between program specification paradigms; x-by-construction meets runtime verification; verification and validation of concurrent and distributed heterogeneous systems; programming - what is next: the role of documentation; automated software re-engineering; DIME day; rigorous engineering of collective adaptive systems; formal methods meet machine learning; digital twin engineering; digital thread in smart manufacturing; formal methods for distributed computing in future railway systems; industrial day.
Download or read book Product Lifecycle Management Leveraging Digital Twins Circular Economy and Knowledge Management for Sustainable Innovation written by Christophe Danjou and published by Springer Nature. This book was released on with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Twins written by Yogini Borole and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-09-18 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Maritime Technology and Engineering 5 Volume 1 written by Carlos Guedes Soares and published by CRC Press. This book was released on 2021-07-08 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of two volumes comprises the collection of the papers presented at the 5th International Conference on Maritime Technology and Engineering (MARTECH 2020) that was held in Lisbon, Portugal, from 16 to 19 November 2020. The Conference has evolved from the series of biennial national conferences in Portugal, which have become an international event, and which reflect the internationalization of the maritime sector and its activities. MARTECH 2020 is the fifth of this new series of biennial conferences. The set comprises 180 contributions that were reviewed by an International Scientific Committee. Volume 1 is dedicated to maritime transportation, ports and maritime traffic, as well as maritime safety and reliability. It further comprises sections dedicated to ship design, cruise ship design, and to the structural aspects of ship design, such as ultimate strength and composites, subsea structures as pipelines, and to ship building and ship repair.
Download or read book Model Driven Engineering and Software Development written by Luís Ferreira Pires and published by Springer Nature. This book was released on 2023-09-04 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-proceedings of the 9th International Conference and 10th International Conference on Model-Driven Engineering and Software Development, MODELSWARD 2021 and MODELSWARD 2022, was held virtually due to the COVID-19 crisis on February 8–10, 2021 and February 6–8, 2022. The 11 full papers included in this book were carefully reviewed and selected from 121 submissions. The purpose of the International Conference on model-driven engineering and software development is to provide a platform for researchers, engineers, academics as well as industrial professionals from all over the world to present their research results and development activities in using models and model driven engineering techniques for system development.
Download or read book Technology and Science for the Ships of the Future written by E. Rizzuto and published by IOS Press. This book was released on 2022-09-29 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: The oceans are a key resource for transportation, energy and material extraction, and food production, representing one of the most important environments on the planet. Technological developments enabling us to exploit marine resources in a sustainable way are therefore of the greatest importance. This book presents the proceedings of the NAV 2022 conference, held in Genoa and La Spezia, Italy, from 15 to 17 June 2022. The conference is held every 3 years, attracting specialists in marine technology from all over the world. NAV 2022 was the 20th edition of the conference, and covered a full spectrum of maritime technology themes, all related to the exploitation of sea resources. The book contains 87 scientific papers, covering subjects ranging from comfort on board; to conceptual and practical ship design; deep sea mining and marine robotics; protection of the environment; renewable marine energy; design and engineering of offshore vessels; digitalization and cyber security; unmanned vehicles; yacht and pleasure craft design, and inland-waterway vessels. Providing a comprehensive coverage of the latest scientific and technical maritime issues, the book will be of interest to all those involved in this vital global industry.
Download or read book Marine Design XIII written by Pentti Kujala and published by CRC Press. This book was released on 2018-06-11 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Design XIII collects the contributions to the 13th International Marine Design Conference (IMDC 2018, Espoo, Finland, 10-14 June 2018). The aim of this IMDC series of conferences is to promote all aspects of marine design as an engineering discipline. The focus is on key design challenges and opportunities in the area of current maritime technologies and markets, with special emphasis on: • Challenges in merging ship design and marine applications of experience-based industrial design • Digitalisation as technological enabler for stronger link between efficient design, operations and maintenance in future • Emerging technologies and their impact on future designs • Cruise ship and icebreaker designs including fleet compositions to meet new market demands To reflect on the conference focus, Marine Design XIII covers the following research topic series: •State of art ship design principles - education, design methodology, structural design, hydrodynamic design; •Cutting edge ship designs and operations - ship concept design, risk and safety, arctic design, autonomous ships; •Energy efficiency and propulsions - energy efficiency, hull form design, propulsion equipment design; •Wider marine designs and practices - navy ships, offshore and wind farms and production. Marine Design XIII contains 2 state-of-the-art reports on design methodologies and cruise ships design, and 4 keynote papers on new directions for vessel design practices and tools, digital maritime traffic, naval ship designs, and new tanker design for arctic. Marine Design XIII will be of interest to academics and professionals in maritime technologies and marine design.
Download or read book Marine Design XIII Volume 1 written by Pentti Kujala and published by CRC Press. This book was released on 2018-06-04 with total page 1077 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is volume 1 of a 2-volume set. Marine Design XIII collects the contributions to the 13th International Marine Design Conference (IMDC 2018, Espoo, Finland, 10-14 June 2018). The aim of this IMDC series of conferences is to promote all aspects of marine design as an engineering discipline. The focus is on key design challenges and opportunities in the area of current maritime technologies and markets, with special emphasis on: • Challenges in merging ship design and marine applications of experience-based industrial design • Digitalisation as technological enabler for stronger link between efficient design, operations and maintenance in future • Emerging technologies and their impact on future designs • Cruise ship and icebreaker designs including fleet compositions to meet new market demands To reflect on the conference focus, Marine Design XIII covers the following research topic series: •State of art ship design principles - education, design methodology, structural design, hydrodynamic design; •Cutting edge ship designs and operations - ship concept design, risk and safety, arctic design, autonomous ships; •Energy efficiency and propulsions - energy efficiency, hull form design, propulsion equipment design; •Wider marine designs and practices - navy ships, offshore and wind farms and production. Marine Design XIII contains 2 state-of-the-art reports on design methodologies and cruise ships design, and 4 keynote papers on new directions for vessel design practices and tools, digital maritime traffic, naval ship designs, and new tanker design for arctic. Marine Design XIII will be of interest to academics and professionals in maritime technologies and marine design.
Download or read book Digital Transformation written by Antonella Petrillo and published by BoD – Books on Demand. This book was released on 2022-10-05 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the business world, digital transformation involves finding and developing new strategies and modernizing the information technology of private and public companies. This book presents practices, challenges, and opportunities related to digital transformation. It includes fourteen chapters that address digital transformation in a variety of industries, including finance, construction, education, marketing, and more.
Download or read book Converting Power into Chemicals and Fuels written by Martin Bajus and published by John Wiley & Sons. This book was released on 2023-10-23 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: CONVERTING POWER INTO CHEMICALS AND FUELS Understand the pivotal role that the petrochemical industry will play in the energy transition by integrating renewable or low-carbon alternatives Power into Chemicals and Fuels stresses the versatility of hydrogen as an enabler of the renewable energy system, an energy vector that can be transported and stored, and a fuel for the transportation sector, heating of buildings and providing heat and feedstock to industry. It can reduce both carbon and local emissions, increase energy security and strengthen the economy, as well as support the deployment of renewable power generation such as wind, solar, nuclear and hydro. With a focus on power-to-X technologies, this book discusses the production of basic petrochemicals in such a way as to minimize the carbon footprint and develop procedures that save energy or use energy from renewable sources. Various different power-to-X system configurations are introduced with discussions on their performance, environmental impact, and cost. Technologies for sustainable hydrogen production are covered, focusing on water electrolysis using renewable energy as well as consideration of the remaining challenges for large scale production and integration with other technologies. Power into Chemicals and Fuels readers will also find: Discussion of recent advances in power-into-x technologies for the production of ethylene, propylene, formic acid, and more Coverage of every stage in the power-into-x process, from power generation to upgrading the final product Thermodynamic, technoeconomic, and life cycle assessment analyses of each major process Power into Chemicals and Fuels is a valuable resource for scientists and engineers working in the petrochemicals and hydrocarbons industries, as well as for all industry professionals in these and related fields.
Download or read book Service Oriented Holonic and Multi agent Manufacturing Systems for Industry of the Future written by Theodor Borangiu and published by Springer. This book was released on 2019-08-02 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book presents selected peer-reviewed papers from the 9th International Workshop on ‘Service Oriented, Holonic and Multi-agent Manufacturing Systems for the Industry of the Future’ organized by Universitat Politècnica de València, Spain, and held on October 3–4, 2019. The SOHOMA 2019 Workshop aimed to foster innovation in the digital transformation of manufacturing and logistics by promoting new concepts and methods and solutions through service orientation in holonic and agent-based control with distributed intelligence. The book provides insights into the theme of the SOHOMA’19 Workshop – ‘Smart anything everywhere – the vertical and horizontal manufacturing integration, ’ addressing ‘Industry of the Future’ (IoF), a term used to describe the 4th industrial revolution initiated by a new generation of adaptive, fully connected, analytical and highly efficient robotized manufacturing systems. This global IoF model describes a new stage of manufacturing, that is fully automatized and uses advanced information, communication and control technologies such as industrial IoT, cyber-physical production systems, cloud manufacturing, resource virtualization, product intelligence, and digital twin, edge and fog computing. It presents the IoF interconnection of distributed manufacturing entities using a ‘system-of-systems’ approach, discussing new types of highly interconnected and self-organizing production resources in the entire value chain; and new types of intelligent decision-making support based on from real-time production data collected from resources, products and machine learning processing. This book is intended for researchers and engineers working in the manufacturing value chain, and specialists developing computer-based control and robotics solutions for the ‘Industry of the Future’. It is also a valuable resource for master’s and Ph.D. students in engineering sciences programs.
Download or read book Proceedings of The 17th East Asian Pacific Conference on Structural Engineering and Construction 2022 written by Guoqing Geng and published by Springer Nature. This book was released on 2023-03-13 with total page 1545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents articles from The 17th East Asian-Pacific Conference on Structural Engineering and Construction, 2022, organized by National University of Singapore. These peer-reviewed articles, authored by professional engineers, academics and researchers, highlight the recent research and developments in structural engineering and construction, embracing the theme- “Towards a Resilient and Sustainable City”. The papers presented in this proceeding provide in-depth discussions with key insights into the future research, development and engineering translation in structural engineering and construction.
Download or read book Handbook of Smart Materials Technologies and Devices written by Chaudhery Mustansar Hussain and published by Springer Nature. This book was released on 2022-11-09 with total page 2831 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook brings together technical expertise, conceptual background, applications, and societal aspects of Industry 4.0: the evolution of automation and data exchange in fabrication technologies, materials processing, and device manufacturing at both experimental and theoretical model scales. The book assembles all the aspects of Industry 4.0, starting from the emergence of the concept to the consequences of its progression. Drawing on expert contributors from around the world, the volume details the technologies that sparked the fourth revolution and illustrates their characteristics, potential, and methods of use in the industrial and societal domains. In addition, important topics such as ethics, privacy and security are considered in a reality where all data is shared and saved remotely. The collection of contribution serve a very broad audience working in the fields of science and engineering, chemical engineering, materials science, nanotechnology, energy, environment, green chemistry, sustainability, electrical and electronic engineering, solid-state physics, surface science, aerosol technology, chemistry, colloid science, device engineering, and computer technology. This handbook ideal reference libraries in universities and industrial institutions, government and independent institutes, individual research groups and scientists.
Download or read book Ship Shaped Offshore Installations written by Jeom Kee Paik and published by Cambridge University Press. This book was released on 2022-02-17 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively updated for the second edition, this handy guide covers the safety engineering of ship-shaped offshore installations at every stage of design, construction, operation, lifetime healthcare and decommissioning. New sections cover additional types of offshore structures, including offshore power plants, as well as cutting-edge technologies and all the latest advances in the field. The text focuses on minimising accidents and the effects of extreme conditions, with new chapters covering earthquakes, hurricanes and terrorist attacks, as well as traditional types of accidental events such as hull girder collapse, collisions, fires and explosions. This is an invaluable resource for students who will be approaching the subject for the first time as well as practising engineers and researchers.
