Download or read book Digital Transmission Lines written by Kenneth D. Granzow and published by OUP USA. This book was released on 1998-06-04 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Transmission Lines provides new analysis, simulation and design tools for engineers who design digital circuits. Featuring a collection of algorithms that the author has used successfully for over 20 years, it explains methods used to simulate multi-wire transmission line signal propagation. The text covers transmission line fundamentals, circuit solutions at line terminations, propagation in layered media, transmission line parameter determination, and simulation of skin effect. An accompanying CD-ROM contains all source codes from the text as well as executable demo versions of commercial CAD codes that illustrate use of the principles in the book. Suitable for a graduate textbook, this volume should be on every digital circuit designer's bookshelf.
Download or read book Transmission Lines in Digital and Analog Electronic Systems written by Clayton R. Paul and published by John Wiley & Sons. This book was released on 2010-09-07 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last 30 years there have been dramatic changes in electrical technology--yet the length of the undergraduate curriculum has remained four years. Until some ten years ago, the analysis of transmission lines was a standard topic in the EE and CpE undergraduate curricula. Today most of the undergraduate curricula contain a rather brief study of the analysis of transmission lines in a one-semester junior-level course on electromagnetics. In some schools, this study of transmission lines is relegated to a senior technical elective or has disappeared from the curriculum altogether. This raises a serious problem in the preparation of EE and CpE undergraduates to be competent in the modern industrial world. For the reasons mentioned above, today's undergraduates lack the basic skills to design high-speed digital and high-frequency analog systems. It does little good to write sophisticated software if the hardware is unable to process the instructions. This problem will increase as the speeds and frequencies of these systems continue to increase seemingly without bound. This book is meant to repair that basic deficiency.
Download or read book Electromagnetics for High Speed Analog and Digital Communication Circuits written by Ali M. Niknejad and published by Cambridge University Press. This book was released on 2007-02-22 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern communications technology demands smaller, faster and more efficient circuits. This book reviews the fundamentals of electromagnetism in passive and active circuit elements, highlighting various effects and potential problems in designing a new circuit. The author begins with a review of the basics - the origin of resistance, capacitance, and inductance - then progresses to more advanced topics such as passive device design and layout, resonant circuits, impedance matching, high-speed switching circuits, and parasitic coupling and isolation techniques. Using examples and applications in RF and microwave systems, the author describes transmission lines, transformers, and distributed circuits. State-of-the-art developments in Si based broadband analog, RF, microwave, and mm-wave circuits are reviewed. With up-to-date results, techniques, practical examples, illustrations and worked examples, this book will be valuable to advanced undergraduate and graduate students of electrical engineering, and practitioners in the IC design industry. Further resources for this title are available at www.cambridge.org/9780521853507.
Download or read book Transmission Lines in Digital Systems for EMC Practitioners written by Clayton R. Paul and published by John Wiley & Sons. This book was released on 2011-10-24 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a brief but comprehensive book covering the set of EMC skills that EMC practitioners today require in order to be successful in high-speed, digital electronics. The basic skills in the book are new and weren’t studied in most curricula some ten years ago. The rapidly changing digital technology has created this demand for a discussion of new analysis skills particularly for the analysis of transmission lines where the conductors that interconnect the electronic modules have become “electrically large,” longer than a tenth of a wavelength, which are increasingly becoming important. Crosstalk between the lines is also rapidly becoming a significant problem in getting modern electronic systems to work satisfactorily. Hence this text concentrates on the modeling of “electrically large” connection conductors where previously-used Kirchhoff’s voltage and current laws and lumped-circuit modeling have become obsolete because of the increasing speeds of modern digital systems. This has caused an increased emphasis on Signal Integrity. Until as recently as some ten years ago, digital system clock speeds and data rates were in the hundreds of megahertz (MHz) range. Prior to that time, the “lands” on printed circuit boards (PCBs) that interconnect the electronic modules had little or no impact on the proper functioning of those electronic circuits. Today, the clock and data speeds have moved into the low gigahertz (GHz) range.
Download or read book PSpice for Filters and Transmission Lines written by Paul Tobin and published by Morgan & Claypool Publishers. This book was released on 2007 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, PSpice for Filters and Transmission Lines, we examine a range of active and passive filters where each design is simulated using the latest Cadence Orcad V10.5 PSpice capture software. These filters cannot match the very high order digital signal processing (DSP) filters considered in PSpice for Digital Signal Processing, but nevertheless these filters have many uses. The active filters considered were designed using Butterworth and Chebychev approximation loss functions rather than using the 'cookbook approach' so that the final design will meet a given specification in an exacting manner. Switched-capacitor filter circuits are examined and here we see how useful PSpice/Probe is in demonstrating how these filters, filter, as it were. Two-port networks are discussed as an introduction to transmission lines and, using a series of problems, we demonstrate quarter-wave and single-stub matching. The concept of time domain reflectrometry as a fault location tool on transmission lines is then examined. In the last chapter we discuss the technique of importing and exporting speech signals into a PSpice schematic using a tailored-made program Wav2ascii. This is a novel technique that greatly extends the simulation boundaries of PSpice. Various digital circuits are also examined at the end of this chapter to demonstrate the use of the bus structure and other techniques.
Download or read book Analysis of Linear Circuits written by Clayton R. Paul and published by . This book was released on 1989 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transmission Lines in Digital and Analog Electronic Systems written by Clayton R. Paul and published by John Wiley & Sons. This book was released on 2011-01-11 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last 30 years there have been dramatic changes in electrical technology--yet the length of the undergraduate curriculum has remained four years. Until some ten years ago, the analysis of transmission lines was a standard topic in the EE and CpE undergraduate curricula. Today most of the undergraduate curricula contain a rather brief study of the analysis of transmission lines in a one-semester junior-level course on electromagnetics. In some schools, this study of transmission lines is relegated to a senior technical elective or has disappeared from the curriculum altogether. This raises a serious problem in the preparation of EE and CpE undergraduates to be competent in the modern industrial world. For the reasons mentioned above, today's undergraduates lack the basic skills to design high-speed digital and high-frequency analog systems. It does little good to write sophisticated software if the hardware is unable to process the instructions. This problem will increase as the speeds and frequencies of these systems continue to increase seemingly without bound. This book is meant to repair that basic deficiency.
Download or read book Transmission Lines written by Richard Collier and published by Cambridge University Press. This book was released on 2013-03-14 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: A rigorous and straightforward treatment of analog, digital and optical transmission lines, which avoids using complex mathematics.
Download or read book Transmission Lines in Computer Engineering written by Sol Rosenstark and published by McGraw-Hill Companies. This book was released on 1994 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: As digital circuit devices continue to increase in speed, interconnection techniques are becoming a crucial element in a system's overall speed and reliability. This work is a guide to state-of-the-art interconnection design and layout, containing practical information and illustrations. The book features thorough explanations of crosstalk on transmission lines, a topic which is often difficult to understand.
Download or read book Bogatin s Practical Guide to Transmission Line Design and Characterization for Signal Integrity Applications written by Eric Bogatin and published by Artech House. This book was released on 2020-05-31 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multimedia eBook establishes a solid foundation in the essential principles of how signals interact with transmission lines, how the physical design of interconnects affects transmission line properties, and how to interpret single-ended and differential time domain reflection (TDR) measurements to extract important figures of merits and avoid common mistakes. This book presents an intuitive understanding of transmission lines. Instructional videos are provided in every chapter that cover important aspects of the interconnect design and characterization process. This video eBook helps establish foundations for designing and characterizing the electrical properties of interconnects to explain in a simplified way how signals propagate and interact with interconnects and how the physical design of transmission structures will impact performance. Never be intimidated by impedance or differential pairs again.
Download or read book Transmission Lines and Lumped Circuits written by Giovanni Miano and published by Elsevier. This book was released on 2001-02-23 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of transmission lines is a classical topic of electrical engineering. Recently this topic has received renewed attention and has been a focus of considerable research. This is because the transmisson line theory has found new and important applications in the area of high-speed VLSI interconnects, while it has retained its significance in the area of power transmission. In many applications, transmission lines are connected to nonlinear circuits. For instance, interconnects of high-speed VLSI chips can be modelled as transmission lines loaded with nonlinear elements. These nonlinearities may lead to many new effects such as instability, chaos, generation of higher order harmonics, etc. The mathematical models of transmission lines with nonlinear loads consist of the linear partial differential equations describing the current and voltage dynamics along the lines together with the nonlinear boundary conditions imposed by the nonlinear loads connected to the lines. These nonlinear boundary conditions make the mathematical treatment very difficult. For this reason, the analysis of transmission lines with nonlinear loads has not been addressed adequately in the existing literature. The unique and distinct feature of the proposed book is that it will present systematic, comprehensive, and in-depth analysis of transmission lines with nonlinear loads. - A unified approach for the analysis of networks composed of distributed and lumped circuits - A simple, concise and completely general way to present the wave propagation on transmission lines, including a thorough study of the line equations in characteristic form - Frequency and time domain multiport representations of any linear transmission line - A detailed analysis of the influence on the line characterization of the frequency and space dependence of the line parameters - A rigorous study of the properties of the analytical and numerical solutions of the network equations - The associated discrete circuits and the associated resisitive circuits of transmission lines - Periodic solutions, bifurcations and chaos in transmission lines connected to noninear lumped circuits
Download or read book Transient Signals on Transmission Lines written by Andrew Peterson and published by Morgan & Claypool Publishers. This book was released on 2009-03-08 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This lecture provides an introduction to transmission line effects in the time domain. Fundamentals including time of flight, impedance discontinuities, proper termination schemes, nonlinear and reactive loads, and crosstalk are considered. Required prerequisite knowledge is limited to conventional circuit theory. The material is intended to supplement standard textbooks for use with undergraduate students in electrical engineering or computer engineering. The contents should also be of value to practicing engineers with interests in signal integrity and high-speed digital design. Table of Contents: Introduction / Solution of the Transmission Line Equations / DC Signals on a Resistively Loaded Transmission Line / Termination Schemes / Equivalent Circuits, Cascaded Lines, and Fan-Outs / Initially-Charged Transmission Lines / Finite Duration Pulses on Transmission Lines / Transmission Lines with Reactive Terminations / Lines with Nonlinear Loads / Crosstalk on Weakly Coupled Transmission Lines
Download or read book Radiating Nonuniform Transmission Line Systems and the Partial Element Equivalent Circuit Method written by Prof. Dr. Juergen Nitsch and published by John Wiley & Sons. This book was released on 2009-10-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: High frequencies of densely packed modern electronic equipment turn even the smallest piece of wire into a transmission line with signal retardation, dispersion, attenuation, and distortion. In electromagnetic environments with high-power microwave or ultra-wideband sources, transmission lines pick up noise currents generated by external electromagnetic fields. These are superimposed on essential signals, the lines acting not only as receiving antennas but radiating parts of the signal energy into the environment. This book is outstanding in its originality. While many textbooks rephrase that which has been written before, this book features: an accessible introduction to the fundamentals of electromagnetics; an explanation of the newest developments in transmission line theory, featuring the transmission line super theory developed by the authors; a unique exposition of the increasingly popular PEEC (partial element equivalent circuit) method, including recent research results. Both the Transmission Line Theory and the PEEC method are well suited to combine linear structures with circuit networks. For engineers, researchers, and graduate students, this text broadens insight into the basics of electrical engineering. It provides a deeper understanding of Maxwellian-circuit-like representations of multi-conductor transmission lines, justifies future research in this field.
Download or read book Transmission Line Protection Using Digital Technology written by Vijay H. Makwana and published by Springer. This book was released on 2016-06-21 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops novel digital distance relaying schemes to eliminate the errors produced by the conventional digital distance relays while protecting power transmission lines against different types of faults. These include high resistance ground faults on single infeed transmission lines; high resistance ground faults on double infeed transmission lines; simultaneous open conductor and ground fault on double infeed transmission lines; inter-circuit faults on parallel transmission lines; simultaneous open conductor and ground fault on series compensated parallel transmission lines; inter-circuit faults on series compensated parallel transmission lines; and phase faults on series compensated double infeed transmission lines. This monograph also details suggestions for further work in the area of digital protection of transmission lines. The contents will be useful to academic as well as professional researchers working in transmission line protection.
Download or read book Digital Signal Transmission written by Bryan Hart and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: The coming of digital electronics has given rise to many textbook- outstanding among which are the authoritative works of Douglas Lewin- dealing, in the main, with the combinational and sequential logic aspects of system design. By comparison, the coverage of digital hardware has been meagre: in particular, books on logic circuit interconnections have been scarce in number. When circuits operated at relatively low speeds this did not cause major problems to engineers and students, but the increasing use of fast, and very fast, logic circuits employed extensively in modern digital systems has brought the requirement for properly-designed transmission paths between printed circuit boards, on the boards, and even in the integrated circuit packages themselves. turn, has necessitated a physical understanding of line pulse This, in behaviour, and an ability to design practically appropriate interconnection systems, by a far wider audience of engineers, scientists and students than has been the case hitherto. For many years the study of transmission lines was, primarily, the province of the telecommunications engineer sending high-frequency radio signals to antennas for radiation into space, and the power engineer working at low frequencies (50/60 Hz) but with corresponding wavelengths comparable with the relatively large distances involved in the supply of power from generating stations to remote users. The textbook treatment of lines was well established, but based mainly on the assumption of sinusoidal signals. This 'frequency-domain' approach is not best suited to the understanding of the transmission of digital signals.
Download or read book Digital Signal Transmission written by Chris Bissell and published by Cambridge University Press. This book was released on 1992-08-20 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook will provide both undergraduates and practising engineers with an up-to-date and thorough grounding in the concepts of modern digital transmission. The book is not encyclopaedic, rather it selects the key concepts and processes and explains them in a deliberate pedagogic style. These concepts and processes are then illustrated by a number of system descriptions. The book is divided into three parts. The longest, Part II, describes the basic processes of digital transmission, such as matched filter detection, pulse shaping, line coding, channel coding, error detection and correction, etc. Understanding the concepts behind these processes requires a grasp of basic mathematical models, and this is provided in Part I. Finally, to put the processes in context, Part III describes elements of the public switched telephone network. The text is written throughout in a modern, digital context, and is comprehensively illustrated with helpful figures. Although the mathematical models (time- and frequency-domain concepts) have wider relevance, they are developed specifically for modelling digital signals. The processes described are those found in current transmission systems, and the description of the PSTN includes an outline of newly formulated standards for the synchronous digital hierarchy (SDH), SONET and for broadband ISDN (ATM). The book will be of great value to 2nd and 3rd year undergraduates studying telecommunications, as well as to graduate trainees and practising engineers. It is appropriate for either private study or as a text associated with a taught telecommunications course. The many worked examples and exercises with solutions will be particularly helpful.
Download or read book Digital Transmission Systems written by David R. Smith and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the development of telecommunication networks throughout the world, digital transmission has now replaced analog transmission as the predominant choice for new transmission facilities. This trend began in the early 1960s when the American Telephone and Telegraph Company first introduced pulse code modulation as a means of increasing capacity in their cable plant. Since that time, digital transmission applications have grown dramatically, notably in the United States, Canada, Japan, and Western Europe. With the rapidity of digital transmission developments and imple mentation, however, there has been a surprising lack of textbooks written on the subject. This book grew out of my work, research, and teaching in digital transmission systems. My objective is to provide an overview of the subject. To accomplish this end, theory has been blended with practice in order to illustrate how one applies theoretical principles to actual design and imple mentation. The book has abundant design examples and references to actual systems. These examples have been drawn from common carriers, manufac turers, and my own experience. Considerable effort has been made to include up-to-date standards, such as those published by the CCITT and CCIR, and to interpret their recommendations in the context of present-day digital transmission systems.
