Download or read book Digital Technologies in Craniomaxillofacial Surgery written by Alex M. Greenberg and published by Springer. This book was released on 2018-06-13 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital technologies are changing the way that surgeons operate. They are revolutionizing the ability of surgeons to visualize, plan, and create rapid prototyped models and patient- specific implants for the broad disciplines of ENT, plastic, oral and maxillofacial surgeons. This book provides information on the latest digital technologies available for craniomaxillofacial surgery, discussing how this technology allows for preplanned procedures with improved and superior outcomes. Rather than improvise during surgery, surgery and its procedures can be preconceptualized with superior outcomes and decreased patient morbidity.
Download or read book Digital Technologies for Craniomaxillofacial Surgery written by Alex M. Greenberg and published by Springer. This book was released on 2016-03-09 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital technologies are changing the way that surgeons operate. They are revolutionizing the ability of surgeons to visualize, plan, and create rapid prototyped models and patient- specific implants for the broad disciplines of ENT, plastic, oral and maxillofacial surgeons. This book provides information on the latest digital technologies available for craniomaxillofacial surgery, discussing how this technology allows for preplanned procedures with improved and superior outcomes. Rather than improvise during surgery, surgery and its procedures can be preconceptualized with superior outcomes and decreased patient morbidity.
Download or read book Digital Technologies in Craniomaxillofacial Surgery written by Boris Edmunds and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Technologies in Oral and Maxillofacial Surgery An Issue of Atlas of the Oral and Maxillofacial Surgery Clinics written by Gary P. Orentlicher and published by Elsevier Health Sciences. This book was released on 2012-03-28 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting edge information for all oral and maxillofacial surgeons on computed tomography and guided surgery! Topics include comparison of CT and cone beam technologies, stereolithographic modeling and surgical guide concepts, virtual technologies in dentoalveolar evaluation and surgery, computer guided planning and placement of dental implants, utilization in the treatment of facial trauma, digital technologies in pathology and reconstruction, 3D technologies in craniofacial and orthognathic surgery, evaluation and fabrication of custom cosmetic facial implants, and extraoral craniofacial applications.
Download or read book Craniomaxillofacial Reconstructive and Corrective Bone Surgery written by Alex M. Greenberg and published by Springer Science & Business Media. This book was released on 2007-11-23 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: This advanced book of rigid fixation describes the scientific principles and applied techniques primarily for the AO/ASIF hardware system.
Download or read book Clinical Applications of Digital Dental Technology written by Radi Masri and published by John Wiley & Sons. This book was released on 2015-04-27 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital equipment in all dental practices is commonplace. From digital imaging through electronic recordkeeping, general dentists and specialists are seeing more accurate diagnoses, faster treatment times, and lower costs for equipment. Here in one volume is a comprehensive look at the digital technology available, describing indications, contraindications, advantages, disadvantages, limitations, and applications in the various dental fields. Included are digital imaging, digital impressions, digital operative dentistry, digital prosthodontics, digital implant fabrication and placement, and digital applications in endodontics, orthodontics, and oral surgery. The book is ideal for dental students seeking a reference for digital dental technology and for seasoned practitioners and specialists interested in incorporating digital technology in their daily practice.
Download or read book Augmented Reality and Artificial Intelligence written by Vladimir Geroimenko and published by Springer Nature. This book was released on 2023-04-29 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first research monograph that explores a new research field and practical applications produced by the combined use of two of the most advanced and powerful technologies available in today’s world – Artificial Intelligence (AI) and Augmented Reality (AR). It is written by a team of 50 researchers and practitioners from 16 countries, which has enabled a thorough coverage of emerging or previously unexplored subject areas. The authors consider practical, theoretical, and cultural aspects of “AI-powered AR” and “AR-enriched AI”, and their usage in a large variety of areas, such as education, medicine, healthcare, dentistry, pharmacy, active lifestyle, smart services, fashion, retail, recommender systems, and several others. Augmented Reality and Artificial Intelligence: The Fusion of Advanced Technologies is essential reading not only for researchers, practitioners and technology developers, but also for students (both graduates and undergraduates) and anyone who is interested in building a comprehensive understanding of the emerging fields of “intelligent augmented environments” and “artificial intelligence presented by augmented reality”.
Download or read book Restoration of Facial Defects with Digital Technology written by Leonardo Ciocca and published by Academic Press. This book was released on 2022-03-20 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Restoration of Facial Defects with Digital Technology gives global descriptions of each method so that readers can project, design, and manufacture a maxillofacial prosthesis and customize maxillofacial surgery. It also covers using CAD-CAM technology to reduce the cost and time of making a facial prosthesis. The complete workflow for producing the ear, nasal, and oculofacial prosthesis (implant and mechanically supported), and for oncologic maxillofacial surgery is described. The atlas form of the book describes each procedure in a step-by-step manner so that readers may reproduce the process and obtain improved results with respect to the analogic procedures. This book communicates the most updated knowledge and the method of digital technology applied to the maxillofacial rehabilitation workflow, in a way that all may use it as a guide for replicating the methodologies presented in the book. This book will help also informatics technicians and biomedical engineers to project and customize the virtual construction of the prosthesis. It also describes how to use the new technology to reduce time and cost of the operatory room. The information in this book will also let readers: - know the new methodologies to use digital technology instead of analogic procedures by anaplastologists; - accomplish unusual hygiene procedures of craniofacial implants (hygienists); - propose prosthetic alternative solution instead of the plastic surgery to the patient who lost ear, nose, or facial parts for oncologic or traumatic reasons; - simplify the plastic reconstructive surgery and module as a function of the final prosthetic rehabilitation supported by craniofacial implants. The book has been written by experts in the field, pulling together information from disparate sources into one reference, making it ideal for anyone working in maxillofacial rehabilitation of the face. - Includes coverage of case studies of facial disfiguring due to cancer or trauma using both surgical and prosthetic approaches - Describes the step-by-step protocol to digitally design ear, oculofacial, and nasal prostheses, and to mold manufacturing using modern 3D printing technology - Provides evidence-based state-of-the-art protocol on maxillofacial and craniofacial implant surgery related to the facial rehabilitation
Download or read book Biomedical Visualisation written by Eiman Abdel Meguid and published by Springer Nature. This book was released on 2023-04-05 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the integration of science and imaging and demonstrates how we can teach and learn in a much more accessible, innovative, and engaging way using technology. This volume is particularly focused on three main themes: advanced microscopy, anatomy education, and radiology visualisation related to patient care. The chapters pertaining to advanced microscopy convey complex biomedical information by visual means. These chapters provide both an overview on the principles of microscopy and specific applications of microscopy that have led to groundbreaking discoveries. Chapters pertaining to education summarise the recent trends in teaching gross and microscopic anatomy and emphasise the creation and use of novel tools to support student learning. Lastly, the radiological visualisation segment dives into the history of radiographic imaging and highlights the profound effect technology has had on improving patient outcomes. This volume will be of particular interest to many; the scope of this book encompasses medicine, dentistry, allied health professions, biomedical sciences, anatomy and histology education, radiology, and microscopy. Students, researchers, educators, and clinicians will learn something new, be stimulated to ask innovative questions, and be inspired to continue the technological advancements pushing science forward.
Download or read book Technological Adoption and Trends in Health Sciences Teaching Learning and Practice written by Marcos-Pablos, Samuel and published by IGI Global. This book was released on 2022-02-11 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of technology in health sciences has a direct impact on health outcomes, as well as on the quality and the safety of healthcare processes. In addition, the use of new technological developments in medical education has proven to be greatly effective and creates realistic learning environments to experience procedures and devices that will become common in medical practice. However, bringing new technologies into the health sector is a complex task, which is why a comprehensive vision of the health sciences ecosystem (encompassing many different areas of research) is vital. Technological Adoption and Trends in Health Sciences Teaching, Learning, and Practice obtains an overview of the technological trends within the health sciences ecosystem, identifies the strengths and weaknesses of the research presented to date, and depicts possible future research directions within health science education and practice. Covering topics such as artificial intelligence and online laboratories, it is ideal for health sciences educators and practitioners, technological solution providers, health organizations, health and care workers, regulators, governing bodies, researchers, academicians, and students.
Download or read book Dental Implants Part II Computer Technology An Issue of Oral and Maxillofacial Surgery Clinics of North America written by Ole Jensen and published by Elsevier Health Sciences. This book was released on 2019-07-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-part issue of Oral and Maxillofacial Surgery Clinics of North America is devoted to Dental Implants. Part II focuses on Computer Technology and is edited by Dr. Ole Jensen. Articles will include: Navigation in Zygomatic Implant Placement; Fibula grafting and simultaneous implants: Jaw in a day?; Mixed reality in implant restorative dentistry; Computer guided implant treatment for complete arch restoration; Nitinol (Smileloc) complete arch guided implant treatment; Nitinol (Smileloc) guided single implant treatment; Navigation for dental implant treatment; Bone reconstruction planning using computer technology; Printed titanium bone grafting shells for alveolar reconstruction; Printed resorbable bone grafting shells for alveolar reconstruction; Printed custom root-replicate dental implants; Surgical simulation all-on-4 implant treatment maxilla; Surgical simulation all-on-4 treatment mandible; Robotics in implant dentistry; and more!
Download or read book Computer Assisted Planning in Craniofacial Surgery E Book written by Amir H Dorafshar and published by Elsevier Health Sciences. This book was released on 2023-11-21 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in both scanning instruments and supporting software have made intraoperative 3D imaging a reality in today's plastic and reconstructive surgery. Computer-Assisted Planning in Craniofacial Surgery provides authoritative, state-of-the-art information on when and how to apply technologies such as virtual planning, stereolithography, and navigation in the practice of craniofacial surgery. This unique, clinically focused title discusses the history and evolution of current techniques, extensively covers the application of current technologies, and includes multidisciplinary perspectives throughout, providing a comprehensive, holistic view of this important topic. - Follows a standard format in each chapter: history of the topic, current literature and applications, key steps and techniques of virtual planning and navigation (with video), and pearls/pitfalls shared by a master surgeon with expertise in each particular area. - Includes preoperative photographs and postoperative results, radiological and computerized imaging, and clinical photos throughout. - Covers potential complications to be aware of in the postoperative period. - Offers expert perspectives on computer-assisted planning from surgeons, physicists, engineers, and other industry leaders. - Additional digital ancillary content may publish up to 6 weeks following the publication date.
Download or read book Computer integrated Surgery written by Russell H. Taylor and published by MIT Press. This book was released on 1996 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Computer-Integrated Surgery leading researchers and clinical practitioners describe the exciting new partnership that is being forged between surgeons and machines such as computers and robots, enabling them to perform certain skilled tasks better than either can do alone.The 19 chapters in part I, Technology, explore the components -- registration, basic tools for surgical planning, human-machine interfaces, robotic manipulators, safety -- that are the basis of computer-integrated surgery. These chapters provide essential background material needed to get up to speed on current work as well as a ready reference for those who are already active in the field.The 39 chapters in part II, Applications, cover eight clinical areas -- neurosurgery, orthopedics, eye surgery, dentistry, minimal access surgery, ENT surgery, craniofacial surgery, and radiotherapy -- with a concluding chapter on the high-tech operating room. Each section contains a brief introduction as well as at least one "requirements and opportunities" chapter written by a leading clinician in the area under discussion.
Download or read book Craniomaxillofacial Reconstructive and Corrective Bone Surgery written by Alex M. Greenberg and published by Springer. This book was released on 2019-08-01 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: This in-depth revision of the successful first edition is one of the only books of its kind to cover the full range of craniomaxillofacial reconstructive and corrective bone surgery. This evolving field has a large number of contributions by worldwide clinicians covering new developments, especially in biomaterials, digital technologies, virtual surgical planning, patient specific implants, and navigation. These topics appeal to Oral and Maxillofacial Surgeons, Plastic Surgeons, ENT/Head and Neck Surgeons, and Neurosurgeons. Complete with updates on popular topics from the first edition, such as advanced jaw reconstruction with stem cells and tissue engineering, wide varieties of microvascular flaps, orthognathic surgery, endoscopic skull base surgery, dental implantology, craniofacial surgery and facial allotransplantation.
Download or read book Emerging Imaging Technologies in Dento Maxillofacial Region An Issue of Dental Clinics of North America written by Rujuta Katkar and published by Elsevier Health Sciences. This book was released on 2018-06-23 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of Dental Clinics of North America focuses on Emerging Imaging Technologies in the Dento-Maxillofacial Region, and is edited by Drs. Rujuta Katkar and Hassem Geha. Articles will include: Digital Imaging, Image Processing and Analysis; Cone Beam Computed Tomography; 3D Volume Rendering, 3D Printing/ Additive Manufacturing; Computer-assisted (navigational) Surgery; Optical Coherence Tomography (OCT); Fluorescence and Near-Infrared Light Transillumination; Computed Tomography; Dental Magnetic Resonance Imaging (MRI); Ultrasound; Nuclear Medicine; and more!
Download or read book Leveraging Digital Technology for Preventive Dentistry written by Asanza, Dachel Martínez and published by IGI Global. This book was released on 2024-08-26 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even in the modern age, oral diseases have a substantial and negative impact on citizens all over the globe. Oral diseases affect nearly half of the global population and represent a significant economic and health burden. As a result, the promotion of oral health and disease prevention information has emerged as one of the most cost-effective strategies in limiting these maladies and treating them should they occur. Leveraging Digital Technology for Preventive Dentistry provides relevant theoretical frameworks and the latest empirical research findings in the area. It discusses the latest findings in digital technologies for health promotion and oral disease promotion, as well as the behavior of these health actions in the international context. Covering topics such as ethical and legal aspects, preventive dentistry, and biometric studies, this book is an excellent resource for librarians, dentists, dental students and educators, researchers, academicians, and more.
Download or read book Clinical Applications of Digital Dental Technology written by Radi Masri and published by John Wiley & Sons. This book was released on 2022-12-12 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clinical Applications of Digital Dental Technology Comprehensive overview of digital dentistry describing available technologies and when/how to use digital dentistry in practice Clinical Applications of Digital Dental Technology provides comprehensive yet practical references to a wide range of potential uses for digital technology in dental practice, discussing a wide range of digital technologies including their indications, contraindications, advantages, disadvantages, limitations, and applications. Overall, the book emphasizes how to use digital dentistry in daily practice across all specialties. With broad coverage of the subject, Clinical Applications of Digital Dental Technology discusses digital imaging, digital impressions, digital prosthodontics, digital implant planning and placement, and digital applications in endodontics, orthodontics, and oral surgery. Each chapter is written by experts in each topic and covers applications for prosthodontics, implant dentistry, oral surgery, endodontics, orthodontics, and other specialty areas. Clinical Applications of Digital Dental Technology also includes information on: Software, scanning, and manufacturing capabilities which have led to an unparalleled revolution leading to a major paradigm shift in all aspects of dentistry Digital radiography, virtual planning, computer-aided design and manufacturing, digital impressions, digitally fabricated dentures, and the “virtual patient” Available technologies, plus a critical evaluation of each one to detail how they are incorporated in daily practice across all specialties Developing technologies in the field with special attention paid to those expected to be on the market sometime in the near future Clinical Applications of Digital Dental Technology is an essential resource for general dentists, specialists, and students who wish to understand digital dentistry and efficiently and intelligently incorporate it into their practices. The text is also useful for laboratory technicians interested in recent digital advances in the dental field.
