Download or read book Digital System Design written by Dawoud Shenouda Dawoud and published by River Publishers. This book was released on 2010-04-10 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, embedded systems are widely deployed in just about every piece of machinery from toasters to spacecrafts, and embedded system designers face many challenges. They are asked to produce increasingly complex systems using the latest technologies, but these technologies are changing faster than ever. They are asked to produce better quality designs with a shorter time-to-market. They are asked to implement increasingly complex functionality but, more importantly, to satisfy numerous other constraints. To achieve these current goals, the designer must be aware of such design constraints and, more importantly, the factors that have a direct effect on them. One of the challenges facing embedded system designers is the selection of the optimum processor for the application in hand: single-purpose, general-purpose, or application specific. Microcontrollers are one member of the family of the application specific processors. Digital System Design concentrates on the use of a microcontroller as the embedded system's processor and how to use it in many embedded system applications. The book covers both the hardware and software aspects needed to design using microcontrollers and is ideal for undergraduate students and engineers that are working in the field of digital system design.

Download or read book Digital System Design Use of Microcontroller written by Shenouda Dawoud and published by CRC Press. This book was released on 2022-09-01 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems are today, widely deployed in just about every piece of machinery from toasters to spacecraft. Embedded system designers face many challenges. They are asked to produce increasingly complex systems using the latest technologies, but these technologies are changing faster than ever. They are asked to produce better quality designs with a shorter time-to-market. They are asked to implement increasingly complex functionality but more importantly to satisfy numerous other constraints. To achieve the current goals of design, the designer must be aware with such design constraints and more importantly, the factors that have a direct effect on them.One of the challenges facing embedded system designers is the selection of the optimum processor for the application in hand; single-purpose, general-purpose or application specific. Microcontrollers are one member of the family of the application specific processors.The book concentrates on the use of microcontroller as the embedded system?s processor, and how to use it in many embedded system applications. The book covers both the hardware and software aspects needed to design using microcontroller.The book is ideal for undergraduate students and also the engineers that are working in the field of digital system design.Contents• Preface;• Process design metrics;• A systems approach to digital system design;• Introduction to microcontrollers and microprocessors;• Instructions and Instruction sets;• Machine language and assembly language;• System memory; Timers, counters and watchdog timer;• Interfacing to local devices / peripherals;• Analogue data and the analogue I/O subsystem;• Multiprocessor communications;• Serial Communications and Network-based interfaces.

Download or read book Embedded Systems Design with the Atmel AVR Microcontroller written by Steven F. Barrett and published by Morgan & Claypool Publishers. This book was released on 2010 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow on to a previously published book, titled "Atmel AVR Microcontroller Primer: Programming and Interfacing." Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller.

Download or read book Microcontroller Based Applied Digital Control written by Dogan Ibrahim and published by Wiley. This book was released on 2006-04-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combines the theory and the practice of applied digital control This book presents the theory and application of microcontroller based automatic control systems. Microcontrollers are single-chip computers which can be used to control real-time systems. Low-cost, single chip and easy to program, they have traditionally been programmed using the assembly language of the target processor. Recent developments in this field mean that it is now possible to program these devices using high-level languages such as BASIC, PASCAL, or C. As a result, very complex control algorithms can be developed and implemented on the microcontrollers. Presenting a detailed treatment of how microcontrollers can be programmed and used in digital control applications, this book: * Introduces the basic principles of the theory of digital control systems. * Provides several working examples of real working mechanical, electrical and fluid systems. * Covers the implementation of control algorithms using microcontrollers. * Examines the advantages and disadvantages of various realization techniques. * Describes the use of MATLAB in the analysis and design of control systems. * Explains the sampling process, z-transforms, and the time response of discrete-time systems in detail. Practising engineers in industry involved with the design and implementation of computer control systems will find Microcontroller Based Applied Digital Control an invaluable resource. In addition, researchers and students in control engineering and electrical engineering will find this book an excellent research tool.

Download or read book Microcontroller System Design Using PIC18F Processors written by Haddad, Nicolas K. and published by IGI Global. This book was released on 2017-03-31 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advancements in technology have led to significant improvements in designing various electronic systems. This provides a wide range of different components that can be utilized across numerous applications. Microcontroller System Design Using PIC18F Processors provides comprehensive discussions on strategies and techniques for optimizing microprocessor-based electronic system development and examines methods for acquiring improved software and hardware skills. Highlighting innovative concepts across a range of topics, such as serial peripheral interfaces, addressing modes, and asynchronous communications, this book is an ideal information source for professionals, researchers, academics, engineers, practitioners, and programmers.

Download or read book Embedded System Design with ARM Cortex M Microcontrollers written by Cem Ünsalan and published by Springer Nature. This book was released on 2022-01-03 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook introduces basic and advanced embedded system topics through Arm Cortex M microcontrollers, covering programmable microcontroller usage starting from basic to advanced concepts using the STMicroelectronics Discovery development board. Designed for use in upper-level undergraduate and graduate courses on microcontrollers, microprocessor systems, and embedded systems, the book explores fundamental and advanced topics, real-time operating systems via FreeRTOS and Mbed OS, and then offers a solid grounding in digital signal processing, digital control, and digital image processing concepts — with emphasis placed on the usage of a microcontroller for these advanced topics. The book uses C language, “the” programming language for microcontrollers, C++ language, and MicroPython, which allows Python language usage on a microcontroller. Sample codes and course slides are available for readers and instructors, and a solutions manual is available to instructors. The book will also be an ideal reference for practicing engineers and electronics hobbyists who wish to become familiar with basic and advanced microcontroller concepts.

Download or read book Fundamentals of Digital Logic and Microcontrollers written by M. Rafiquzzaman and published by John Wiley & Sons. This book was released on 2014-11-06 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to reflect the latest advances in the field, the Sixth Edition of Fundamentals of Digital Logic and Microcontrollers further enhances its reputation as the most accessible introduction to the basic principles and tools required in the design of digital systems. Features updates and revision to more than half of the material from the previous edition Offers an all-encompassing focus on the areas of computer design, digital logic, and digital systems, unlike other texts in the marketplace Written with clear and concise explanations of fundamental topics such as number system and Boolean algebra, and simplified examples and tutorials utilizing the PIC18F4321 microcontroller Covers an enhanced version of both combinational and sequential logic design, basics of computer organization, and microcontrollers

Download or read book Embedded Digital Control with Microcontrollers written by Cem Unsalan and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: EMBEDDED DIGITAL CONTROL WITH MICROCONTROLLERS Explore a concise and practical introduction to implementation methods and the theory of digital control systems on microcontrollers Embedded Digital Control with Microcontrollers delivers expert instruction in digital control system implementation techniques on the widely used ARM Cortex-M microcontroller. The accomplished authors present the included information in three phases. First, they describe how to implement prototype digital control systems via the Python programming language in order to help the reader better understand theoretical digital control concepts. Second, the book offers readers direction on using the C programming language to implement digital control systems on actual microcontrollers. This will allow readers to solve real-life problems involving digital control, robotics, and mechatronics. Finally, readers will learn how to merge the theoretical and practical issues discussed in the book by implementing digital control systems in real-life applications. Throughout the book, the application of digital control systems using the Python programming language ensures the reader can apply the theory contained within. Readers will also benefit from the inclusion of: A thorough introduction to the hardware used in the book, including STM32 Nucleo Development Boards and motor drive expansion boards An exploration of the software used in the book, including Python, MicroPython, and Mbed Practical discussions of digital control basics, including discrete-time signals, discrete-time systems, linear and time-invariant systems, and constant coefficient difference equations An examination of how to represent a continuous-time system in digital form, including analog-to-digital conversion and digital-to-analog conversion Perfect for undergraduate students in electrical engineering, Embedded Digital Control with Microcontrollers will also earn a place in the libraries of professional engineers and hobbyists working on digital control and robotics systems seeking a one-stop reference for digital control systems on microcontrollers.

Download or read book Embedded Microcontroller Interfacing written by Gourab Sen Gupta and published by Springer Science & Business Media. This book was released on 2010-07-15 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed-Signal Embedded Microcontrollers are commonly used in integrating analog components needed to control non-digital electronic systems. They are used in automatically controlled devices and products, such as automobile engine control systems, wireless remote controllers, office machines, home appliances, power tools, and toys. Microcontrollers make it economical to digitally control even more devices and processes by reducing the size and cost, compared to a design that uses a separate microprocessor, memory, and input/output devices. In many undergraduate and post-graduate courses, teaching of mixed-signal microcontrollers and their use for project work has become compulsory. Students face a lot of difficulties when they have to interface a microcontroller with the electronics they deal with. This book addresses some issues of interfacing the microcontrollers and describes some project implementations with the Silicon Lab C8051F020 mixed–signal microcontroller. The intended readers are college and university students specializing in electronics, computer systems engineering, electrical and electronics engineering; researchers involved with electronics based system, practitioners, technicians and in general anybody interested in microcontrollers based projects.

Download or read book Embedded Systems Design written by Steve Heath and published by Elsevier. This book was released on 2002-10-30 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new edition the latest ARM processors and other hardware developments are fully covered along with new sections on Embedded Linux and the new freeware operating system eCOS. The hot topic of embedded systems and the internet is also introduced. In addition a fascinating new case study explores how embedded systems can be developed and experimented with using nothing more than a standard PC.* A practical introduction to the hottest topic in modern electronics design* Covers hardware, interfacing and programming in one book* New material on Embedded Linux for embedded internet systems

Download or read book Digital Electronics Microprocessor written by Sachan and published by Independently Published. This book was released on 2019-09-08 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years Digital Electronics & Microprocessor is being used extensively in computers, microprocessor and very large scale integration (VLSI) design and digital signal processing research and many other things. This rapid progress in Electronics Engineering has created an increasing demand for trained Digital System Designs personnel. This book is intended for the undergraduate and postgraduate students specializing in Electronics Engineering, Computer Science Engineering and Information Technology. It will also serve as reference material for engineers employed in industry. The fundamental concepts and principles behind Digital Electronics & Microprocessor are explained in a simple, easy- to- understand manner. Each chapter contains a large number of solved example or problem which will help the students in problem solving and designing of Electronics system. This text book is organized into Thirteen chapters. Chapter 1: Number Systems and Boolean Algebra Chapter 2: Combinational Circuits Chapter 3: Sequential Circuits Chapter 4 : Digital Logic FamiliesChapter 5: Memory & Programmable Logic Chapter 6: Asynchronous Sequential Logic Chapter-7: Digital System Design Using Hardware Chapter 8: Digital System Design Using VHDL Chapter-9: Design of Fast Adder Chapter 10: Design of Fast MultiplierChapter 11: Basics of MicroprocessorChapter 12: Programing of MicroprocessorChapter 13: Micro Controller & Its Applications The book Digital Electronics & Microprocessor is written to cater to the needs of the undergraduate courses in the discipline of Electronics & Communication Engineering, Computer Science Engineering, Information Technology, Electronics & Instrumentation Engineering, Electrical & Electronics Engineering and postgraduate students specializing in Electronics. It will also serve as reference material for engineers employed in industry. The fundamental concepts and principles behind Digital Electronics & Microprocessor are explained in a simple, easy- to- understand manner. Digital Electronics & Microprocessor also gives the possible experiments of digital logic design using VHDL and Hardware that can be done by students of B.E. /B.Tech./M.Tech. and Ph.D. level.Salient Features*Detailed coverage of Number Systems and Boolean Algebra, Combinational Circuits and Sequential Circuits *Comprehensive chapters on Digital Logic Families, Memory & Programmable Logic and Asynchronous Sequential Logic *Detailed coverage of Digital System Design Using Hardware, Digital System Design Using VHDL, Design of Fast Adder and Design of Fast Multiplier*Comprehensive chapters on Basics of Microprocessor, Programing of Microprocessor, Microcontroller and Its Application.*Each chapter contains a large number of solved example or objective type's problem which will help the students in problem solving and designing of digital system. *Clear perception of the various problems with a large number of neat, well drawn and illustrative diagrams. *Simple Language, easy- to- understand manner. I do hope that the text book in the present form will meet the requirement of the students doing graduation in Electronics & Communication Engineering, Computer Science Engineering, Information Technology, Electronics & Instrumentation Engineering and Electrical & Electronics Engineering. I shall appreciate any suggestions from students and faculty members alike so that we can strive to make the text book more useful in the edition to come.

Download or read book Introduction to Microcontroller Programming for Power Electronics Control Applications written by Mattia Rossi and published by CRC Press. This book was released on 2021-09-29 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microcontroller programming is not a trivial task. Indeed, it is necessary to set correctly the required peripherals by using programming languages like C/C++ or directly machine code. Nevertheless, MathWorks® developed a model-based workflow linked with an automatic code generation tool able to translate Simulink® schemes into executable files. This represents a rapid prototyping procedure, and it can be applied to many microcontroller boards available on the market. Among them, this introductory book focuses on the C2000 LaunchPadTM family from Texas InstrumentsTM to provide the reader basic programming strategies, implementation guidelines and hardware considerations for some power electronics-based control applications. Starting from simple examples such as turning on/off on-board LEDs, Analog-to-Digital conversion, waveform generation, or how a Pulse-Width-Modulation peripheral should be managed, the reader is guided through the settings of the specific MCU-related Simulink® blocks enabled for code translation. Then, the book proposes several control problems in terms of power management of RL and RLC loads (e.g., involving DC-DC converters) and closed-loop control of DC motors. The control schemes are investigated as well as the working principles of power converter topologies needed to drive the systems under investigation. Finally, a couple of exercises are proposed to check the reader’s understanding while presenting a processor-in-the loop (PIL) technique to either emulate the dynamics of complex systems or testing computational performance. Thus, this book is oriented to graduate students of electrical and automation and control engineering pursuing a curriculum in power electronics and drives, as well as to engineers and researchers who want to deepen their knowledge and acquire new competences in the design and implementations of control schemes aimed to the aforementioned application fields. Indeed, it is assumed that the reader is well acquainted with fundamentals of electrical machines and power electronics, as well as with continuous-time modeling strategies and linear control techniques. In addition, familiarity with sampled-data, discrete-time system analysis and embedded design topics is a plus. However, even if these competences are helpful, they are not essential, since this book provides some basic knowledge even to whom is approaching these topics for the first time. Key concepts are developed from scratch, including a brief review of control theory and modeling strategies for power electronic-based systems.

Download or read book Digital System Design with FPGA Implementation Using Verilog and VHDL written by Cem Unsalan and published by McGraw Hill Professional. This book was released on 2017-07-14 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master FPGA digital system design and implementation with Verilog and VHDL This practical guide explores the development and deployment of FPGA-based digital systems using the two most popular hardware description languages, Verilog and VHDL. Written by a pair of digital circuit design experts, the book offers a solid grounding in FPGA principles, practices, and applications and provides an overview of more complex topics. Important concepts are demonstrated through real-world examples, ready-to-run code, and inexpensive start-to-finish projects for both the Basys and Arty boards. Digital System Design with FPGA: Implementation Using Verilog and VHDL covers: • Field programmable gate array fundamentals • Basys and Arty FPGA boards • The Vivado design suite • Verilog and VHDL • Data types and operators • Combinational circuits and circuit blocks • Data storage elements and sequential circuits • Soft-core microcontroller and digital interfacing • Advanced FPGA applications • The future of FPGA

Download or read book Embedded Systems Design using the MSP430FR2355 LaunchPadTM written by Brock J. LaMeres and published by Springer Nature. This book was released on 2020-06-19 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach. LEARN BY EXAMPLE – This book is designed to teach the material the way it is learned, through example. Every concept is supported by numerous programming examples that provide the reader with a step-by-step explanation for how and why the computer is doing what it is doing. LEARN BY DOING – This book targets the Texas Instruments MSP430 microcontroller. This platform is a widely popular, low-cost embedded system that is used to illustrate each concept in the book. The book is designed for a reader that is at their computer with an MSP430FR2355 LaunchPadTM Development Kit plugged in so that each example can be coded and run as they learn. LEARN BOTH ASSEMBLY AND C – The book teaches the basic operation of an embedded computer using assembly language so that the computer operation can be explored at a low-level. Once more complicated systems are introduced (i.e., timers, analog-to-digital converters, and serial interfaces), the book moves into the C programming language. Moving to C allows the learner to abstract the operation of the lower-level hardware and focus on understanding how to “make things work”. BASED ON SOUND PEDAGOGY - This book is designed with learning outcomes and assessment at its core. Each section addresses a specific learning outcome that the student should be able to “do” after its completion. The concept checks and exercise problems provide a rich set of assessment tools to measure student performance on each outcome.

Download or read book Making Embedded Systems written by Elecia White and published by "O'Reilly Media, Inc.". This book was released on 2011-10-25 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interested in developing embedded systems? Since they donâ??t tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert whoâ??s created embedded systems ranging from urban surveillance and DNA scanners to childrenâ??s toys, this book is ideal for intermediate and experienced programmers, no matter what platform you use. Optimize your system to reduce cost and increase performance Develop an architecture that makes your software robust in resource-constrained environments Explore sensors, motors, and other I/O devices Do more with less: reduce RAM consumption, code space, processor cycles, and power consumption Learn how to update embedded code directly in the processor Discover how to implement complex mathematics on small processors Understand what interviewers look for when you apply for an embedded systems job "Making Embedded Systems is the book for a C programmer who wants to enter the fun (and lucrative) world of embedded systems. Itâ??s very well writtenâ??entertaining, evenâ??and filled with clear illustrations." â??Jack Ganssle, author and embedded system expert.

Download or read book Digital Electronics written by Anil K. Maini and published by John Wiley & Sons. This book was released on 2007-09-27 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fundamentals and implementation of digital electronics are essential to understanding the design and working of consumer/industrial electronics, communications, embedded systems, computers, security and military equipment. Devices used in applications such as these are constantly decreasing in size and employing more complex technology. It is therefore essential for engineers and students to understand the fundamentals, implementation and application principles of digital electronics, devices and integrated circuits. This is so that they can use the most appropriate and effective technique to suit their technical need. This book provides practical and comprehensive coverage of digital electronics, bringing together information on fundamental theory, operational aspects and potential applications. With worked problems, examples, and review questions for each chapter, Digital Electronics includes: information on number systems, binary codes, digital arithmetic, logic gates and families, and Boolean algebra; an in-depth look at multiplexers, de-multiplexers, devices for arithmetic operations, flip-flops and related devices, counters and registers, and data conversion circuits; up-to-date coverage of recent application fields, such as programmable logic devices, microprocessors, microcontrollers, digital troubleshooting and digital instrumentation. A comprehensive, must-read book on digital electronics for senior undergraduate and graduate students of electrical, electronics and computer engineering, and a valuable reference book for professionals and researchers.

Download or read book Embedded Microcontrollers written by Todd D. Morton and published by . This book was released on 2001 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book on designing real-time embedded systems using 8-and 16-bit microcontrollers covers both assembly and C programming and real-time kernels. Using a large number of specific examples, it focuses on the concepts, processes, conventions, and techniques used in design and debugging. Chapter topics include programming basics; simple assembly code construction; CPU12 programming model; basic assembly programming techniques; assembly program design and structure; assembly applications; real-time I/O and multitasking; microcontroller I/O resources; modular and C code construction; creating and accessing data in C; real-time multitasking in C; and using the MICROC/OS-II preemptive kernel. For anyone who wants to design small- to medium-sized embedded systems.