Download or read book Digital Control Using Microprocessors written by Paul Katz and published by Prentice Hall. This book was released on 1981 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Control Engineering written by M. Gopal and published by New Age International. This book was released on 1988 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Embedded Digital Control with Microcontrollers written by Cem Unsalan and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: EMBEDDED DIGITAL CONTROL WITH MICROCONTROLLERS Explore a concise and practical introduction to implementation methods and the theory of digital control systems on microcontrollers Embedded Digital Control with Microcontrollers delivers expert instruction in digital control system implementation techniques on the widely used ARM Cortex-M microcontroller. The accomplished authors present the included information in three phases. First, they describe how to implement prototype digital control systems via the Python programming language in order to help the reader better understand theoretical digital control concepts. Second, the book offers readers direction on using the C programming language to implement digital control systems on actual microcontrollers. This will allow readers to solve real-life problems involving digital control, robotics, and mechatronics. Finally, readers will learn how to merge the theoretical and practical issues discussed in the book by implementing digital control systems in real-life applications. Throughout the book, the application of digital control systems using the Python programming language ensures the reader can apply the theory contained within. Readers will also benefit from the inclusion of: A thorough introduction to the hardware used in the book, including STM32 Nucleo Development Boards and motor drive expansion boards An exploration of the software used in the book, including Python, MicroPython, and Mbed Practical discussions of digital control basics, including discrete-time signals, discrete-time systems, linear and time-invariant systems, and constant coefficient difference equations An examination of how to represent a continuous-time system in digital form, including analog-to-digital conversion and digital-to-analog conversion Perfect for undergraduate students in electrical engineering, Embedded Digital Control with Microcontrollers will also earn a place in the libraries of professional engineers and hobbyists working on digital control and robotics systems seeking a one-stop reference for digital control systems on microcontrollers.
Download or read book Digital Control Systems written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2007-05-11 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.
Download or read book Microprocessor Based Control Systems written by N.K. Sinha and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in LSI technology and the consequent availability of inexpensive but powerful microprocessors have already affected the process control industry in a significant manner. Microprocessors are being increasingly utilized for improving the performance of control systems and making them more sophisticated as well as reliable. Many concepts of adaptive and learning control theory which were considered impractical only 20 years ago are now being implemented. With these developments there has been a steady growth in hardware and software tools to support the microprocessor in its complex tasks. With the current trend of using several microprocessors for performing the complex tasks in a modern control system, a great deal of emphasis is being given to the topic of the transfer and sharing of information between them. Thus the subject of local area networking in the industrial environment has become assumed great importance. The object of this book is to present both hardware and software concepts that are important in the development of microprocessor-based control systems. An attempt has been made to obtain a balance between theory and practice, with emphasis on practical applications. It should be useful for both practicing engineers and students who are interested in learning the practical details of the implementation of microprocessor-based control systems. As some of the related material has been published in the earlier volumes of this series, duplication has been avoided as far as possible.
Download or read book Digital Control Systems written by Benjamin C. Kuo and published by . This book was released on 2007 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book DIGITAL CONTROL With CD written by Kannan M. Moudgalya and published by . This book was released on 2009-08-01 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market_Desc: " Engineering and postgraduate students in control engineering and electronic engineering." Practicing control systems engineers and researchers in this field." Engineers needing to learn digital control Special Features: " Developed from three existing lecture courses on digital control, systems identification and intermediate process control" Includes numerous examples, problems, solutions and Matlab code." Highlights the advantages of the polynomial approach." Assumes little or no prior knowledge of analogue control." Offers a very thorough treatment of the z-transform and frequency-domain analysis." Includes a thorough treatment of identification." Attempts the tuning of PID controllers using model-based control techniques." Concludes each chapter with a 2018 problems' section.The distinguishing feature of the Indian edition of this book is the accompanying CD which contains:- A ten minute video introduction to the book, using slides- Set of chapter wise presentation slides for teachers with animation- Set of slides for students, with four slides on one page- Matlab code, in zip format and also as individual files, arranged in a directory structure- Scilab code in the same format as the Matlab code- Scilab software, using which one can install Scilab- Spoken tutorial on Scilab that explains how to install Scilab About The Book: This book is about the design of digital controllers. An attempt has been made to present digital control from scratch. The book is organized into five parts. The first deals with modeling, the second concerned with the topic of signal processing, the third devoted to identification of plants from measurements, fourth section looks at the transfer function approach to control design and the last section is devoted to state space techniques for control design. The topics of observers, Kalman filter and combined controller and observer have also been included.
Download or read book Microcontroller Based Applied Digital Control written by Dogan Ibrahim and published by Wiley. This book was released on 2006-04-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combines the theory and the practice of applied digital control This book presents the theory and application of microcontroller based automatic control systems. Microcontrollers are single-chip computers which can be used to control real-time systems. Low-cost, single chip and easy to program, they have traditionally been programmed using the assembly language of the target processor. Recent developments in this field mean that it is now possible to program these devices using high-level languages such as BASIC, PASCAL, or C. As a result, very complex control algorithms can be developed and implemented on the microcontrollers. Presenting a detailed treatment of how microcontrollers can be programmed and used in digital control applications, this book: * Introduces the basic principles of the theory of digital control systems. * Provides several working examples of real working mechanical, electrical and fluid systems. * Covers the implementation of control algorithms using microcontrollers. * Examines the advantages and disadvantages of various realization techniques. * Describes the use of MATLAB in the analysis and design of control systems. * Explains the sampling process, z-transforms, and the time response of discrete-time systems in detail. Practising engineers in industry involved with the design and implementation of computer control systems will find Microcontroller Based Applied Digital Control an invaluable resource. In addition, researchers and students in control engineering and electrical engineering will find this book an excellent research tool.
Download or read book Digital Signal Processing in Power Electronics Control Circuits written by Krzysztof Sozański and published by Springer Science & Business Media. This book was released on 2013-07-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many digital control circuits in current literature are described using analog transmittance. This may not always be acceptable, especially if the sampling frequency and power transistor switching frequencies are close to the band of interest. Therefore, a digital circuit is considered as a digital controller rather than an analog circuit. This helps to avoid errors and instability in high frequency components. Digital Signal Processing in Power Electronics Control Circuits covers problems concerning the design and realization of digital control algorithms for power electronics circuits using digital signal processing (DSP) methods. This book bridges the gap between power electronics and DSP. The following realizations of digital control circuits are considered: digital signal processors, microprocessors, microcontrollers, programmable digital circuits. Discussed in this book is signal processing, starting from analog signal acquisition, through its conversion to digital form, methods of its filtration and separation, and ending with pulse control of output power transistors. The book is focused on two applications for the considered methods of digital signal processing: an active power filter and a digital class D power amplifier. The major benefit to readers is the acquisition of specific knowledge concerning discussions on the processing of signals from voltage or current sensors using a digital signal processor and to the signals controlling the output inverter transistors. Included are some Matlab examples for illustration of the considered problems.
Download or read book Modern Control System Theory written by M. Gopal and published by New Age International. This book was released on 1993 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the book... The book provides an integrated treatment of continuous-time and discrete-time systems for two courses at postgraduate level, or one course at undergraduate and one course at postgraduate level. It covers mainly two areas of modern control theory, namely; system theory, and multivariable and optimal control. The coverage of the former is quite exhaustive while that of latter is adequate with significant provision of the necessary topics that enables a research student to comprehend various technical papers. The stress is on interdisciplinary nature of the subject. Practical control problems from various engineering disciplines have been drawn to illustrate the potential concepts. Most of the theoretical results have been presented in a manner suitable for digital computer programming along with the necessary algorithms for numerical computations.
Download or read book Modern Digital Control Systems written by Raymond G. Jacquot and published by Routledge. This book was released on 2019-01-22 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents traditional methods and current techniques of incorporating the computer into closed-loop dynamic systems control, combining conventional transfer function design and state variable concepts. Digital Control Designer - an award-winning software program which permits the solution of highly complex problems - is available on the CR
Download or read book Theory and Application of Digital Control written by A. K. Mahalanabis and published by Elsevier. This book was released on 2014-05-20 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Application of Digital Control contains the proceedings of the IFAC Symposium held at New Delhi, India on January 5-7, 1982. This book particularly presents the texts of the five plenary talks and the 110 papers of the symposium. This book organizes the papers into 109 chapters, with nearly one-third of the papers focus on digital control, particularly, software and hardware of control using microcomputers; computer-aided design; and adaptive control and modeling for digital control. Another set of papers deal with several applications of digital control techniques in solving interesting problems of socio economic systems, electrical power systems, bio systems, and artificial satellites. The reader will benefit hugely from the topics in this book that span several important theoretical and applied areas of the fast-changing topic of digital control.
Download or read book Digital Logic and Microprocessor Design with VHDL written by Enoch O. Hwang and published by Cengage Learning. This book was released on 2006 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will teach students how to design digital logic circuits, specifically combinational and sequential circuits. Students will learn how to put these two types of circuits together to form dedicated and general-purpose microprocessors. This book is unique in that it combines the use of logic principles and the building of individual components to create data paths and control units, and finally the building of real dedicated custom microprocessors and general-purpose microprocessors. After understanding the material in the book, students will be able to design simple microprocessors and implement them in real hardware.
Download or read book Microprocessors in Robotic and Manufacturing Systems written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microprocessors play a dominant role in computer technology and have contributed uniquely in the development of many new concepts and design techniques for modem industrial systems. This contribution is excessively high in the area of robotic and manufacturing systems. However, it is the editor's feeling that a reference book describing this contribution in a cohesive way and covering the major hardware and software issues is lacking. The purpose of this book is exactly to fill in this gap through the collection and presentation of the experience of a number of experts and professionals working in different academic and industrial environments. The book is divided in three parts. Part 1 involves the first four chapters and deals with the utilization of microprocessors and digital signal processors ( DSPs ) for the computation of robot dynamics. The emphasis here is on parallel computation with particular problems attacked being task granularity, task allocation/scheduling and communication issues. Chapter I, by Zheng and Hemami, is concerned with the real-time multiprocessor computation of torques in robot control systems via the Newton-Euler equations. This reduces substantially the height of the evaluation tree which leads to more effective parallel processing. Chapter 2, by D'Hollander, examines thoroughly the automatic scheduling of the Newton-Euler inverse dynamic equations. The automatic program decomposition and scheduling techniques developed are embedded in a tool used to generate multiprocessor schedules from a high-level language program.
Download or read book Direct Digital Control of Building Systems written by H. Michael Newman and published by John Wiley & Sons. This book was released on 1994 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: It emphasizes throughout the high performance, reliability, and reduced cost of modern digital sensors, control devices, microprocessors, computer memory, and other electronic components.
Download or read book Fundamental of Digital Electronics And Microprocessors written by A.K.Chhabra and published by S. Chand Publishing. This book was released on 2005 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the recent years there has been rapid advances in the field of Digital Electronics and Microprocessor.This book is intended to help students to keep pace with these latest developments.The Present book is revised version of earlier book'Introduction to Digital Computers'by the same author.Now this book is written in a lucid and simple language,which gives clear explanation of basics of Digital Electronics,Computers and icroprocessors.
Download or read book Digital Logic and Microprocessor Design with Interfacing written by ENOCH. HWANG and published by . This book was released on 2017-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
