Download or read book Digital Control Systems written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2007-05-11 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.
Download or read book Control System Design written by Graham Clifford Goodwin and published by Pearson. This book was released on 2001 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: For both undergraduate and graduate courses in Control System Design. Using a "how to do it" approach with a strong emphasis on real-world design, this text provides comprehensive, single-source coverage of the full spectrum of control system design. Each of the text's 8 parts covers an area in control--ranging from signals and systems (Bode Diagrams, Root Locus, etc.), to SISO control (including PID and Fundamental Design Trade-Offs) and MIMO systems (including Constraints, MPC, Decoupling, etc.).
Download or read book Digital Control Engineering written by M. Sami Fadali and published by Academic Press. This book was released on 2012-08-21 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital controllers are part of nearly all modern personal, industrial, and transportation systems. Every senior or graduate student of electrical, chemical or mechanical engineering should therefore be familiar with the basic theory of digital controllers. This new text covers the fundamental principles and applications of digital control engineering, with emphasis on engineering design. Fadali and Visioli cover analysis and design of digitally controlled systems and describe applications of digital controls in a wide range of fields. With worked examples and Matlab applications in every chapter and many end-of-chapter assignments, this text provides both theory and practice for those coming to digital control engineering for the first time, whether as a student or practicing engineer. Extensive Use of computational tools: Matlab sections at end of each chapter show how to implement concepts from the chapter Frees the student from the drudgery of mundane calculations and allows him to consider more subtle aspects of control system analysis and design An engineering approach to digital controls: emphasis throughout the book is on design of control systems. Mathematics is used to help explain concepts, but throughout the text discussion is tied to design and implementation. For example coverage of analog controls in chapter 5 is not simply a review, but is used to show how analog control systems map to digital control systems Review of Background Material: contains review material to aid understanding of digital control analysis and design. Examples include discussion of discrete-time systems in time domain and frequency domain (reviewed from linear systems course) and root locus design in s-domain and z-domain (reviewed from feedback control course) Inclusion of Advanced Topics In addition to the basic topics required for a one semester senior/graduate class, the text includes some advanced material to make it suitable for an introductory graduate level class or for two quarters at the senior/graduate level. Examples of optional topics are state-space methods, which may receive brief coverage in a one semester course, and nonlinear discrete-time systems Minimal Mathematics Prerequisites The mathematics background required for understanding most of the book is based on what can be reasonably expected from the average electrical, chemical or mechanical engineering senior. This background includes three semesters of calculus, differential equations and basic linear algebra. Some texts on digital control require more
Download or read book Analog and Digital Control System Design written by Chi-Tsong Chen and published by OUP USA. This book was released on 2006-02-24 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text's contemporary approach focuses on the concepts of linear control systems, rather than computational mechanics. Straightforward coverage includes an integrated treatment of both classical and modern control system methods. The text emphasizes design with discussions of problem formulation, design criteria, physical constraints, several design methods, and implementation of compensators. Discussions of topics not found in other texts—such as pole placement, model matching and robust tracking—add to the text's cutting-edge presentation. Students will appreciate the applications and discussions of practical aspects, including the leading problem in developing block diagrams, noise, disturbances, and plant perturbations. State feedback and state estimators are designed using state variable equations and transfer functions, offering a comparison of the two approaches. The incorporation of MATLAB throughout the text helps students to avoid time-consuming computation and concentrate on control system design and analysis.
Download or read book Digital Control System Analysis and Design written by Charles L. Phillips and published by . This book was released on 1990 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Discrete Time Control System Design with Applications written by C.A. Rabbath and published by Springer Science & Business Media. This book was released on 2013-12-02 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book provides a bridge between digital control theory and vehicle guidance and control practice. It presents practical techniques of digital redesign and direct discrete-time design suitable for a real-time implementation of controllers and guidance laws at multiple rates and with and computational techniques. The theory of digital control is given as theorems, lemmas, and propositions. The design of the digital guidance and control systems is illustrated by means of step-by-step procedures, algorithms, and case studies. The systems proposed are applied to realistic models of unmanned systems and missiles, and digital implementation.
Download or read book Control System Design Guide written by George Ellis and published by Butterworth-Heinemann. This book was released on 2012-05-15 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title will help engineers to apply control theory to practical systems using their PC. It provides an intuitive approach to controls, avoiding unecessary math and emphasising key concepts with control system models
Download or read book Digital Control System Analysis and Design written by Charles L. Phillips and published by . This book was released on 1990 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Digital Control written by James R. Leigh and published by Prentice Hall. This book was released on 1985 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Digital Control System Design written by G. H. Hostetter and published by Oxford University Press, USA. This book was released on 1988 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
Download or read book Control System Design written by B. S. Manke and published by Mercury Learning and Information. This book was released on 2017-11-20 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the theory and mathematics needed to understand the concepts in control system design. Chapter 1 deals with compensation network design. Nonlinear control systems, including phase-plane analysis and the Delta method are presented in chapter 2. The analysis and design aspects based on the state variable approach are presented in Chapter 3. The discrete time control systems form the basis for the study of digital control systems in Chapter 4, covering the frequency response, root locus analysis, and stability considerations for discrete-time control systems. The stability analysis based on the Lyapunov method is given in chapter 5. The appendices include two US government articles on industrial control systems (NIST) and the control system design for a solar energy storage system (U.S. Dept. of Energy). Concepts in the text are supported by numerical examples. Features: • Covers the theory and mathematics needed to understand the concepts in control system design • Includes two U.S. government articles on industrial control systems (NIST) and the control system design for a solar energy storage system (U.S. Department of Energy)
Download or read book Industrial Digital Control Systems written by K. Warwick and published by IET. This book was released on 1988 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes: Digital signals and systems. Digital controllers for process control applications. Design of digital controllers. Control of time delay systems. State-space concepts. System identification. Introduction to discrete optimal control. Multivariable control. Adaptive control. Computer aided design for industrial control systems. Reliability and redundancy in microprocessor controllers. Software and hardware aspects of industrial controller implementations. Application of distributed digital control algorithms to power stations. An expert system for process control.
Download or read book Modern Digital Control Systems written by Raymond G. Jacquot and published by Routledge. This book was released on 2019-01-22 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents traditional methods and current techniques of incorporating the computer into closed-loop dynamic systems control, combining conventional transfer function design and state variable concepts. Digital Control Designer - an award-winning software program which permits the solution of highly complex problems - is available on the CR
Download or read book Digital Control Systems written by R. Isermann and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: The great advances made in large-scale integration of semiconductors, the resulting cost-effective digital processors and data storage devi ces, and the development of suitable programming techniques are all having increasing influence on the techniques of measurement and con trol and on automation in general. The application of digital techni ques to process automation started in about 1960 when the first process computer was installed. From about 1970 computers have become standard equipment for the automation of industrial processes, connected on-line in open or closed loop. The annual increase of installed process compu ters in the last decade was about 20- 30 %. The cost of hardware has shown a tendency to decrease, whereas the relative cost of user soft ware has tended to increase. Because of the relatively high total cost, the first phase of digital computer application to process control is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Such centralization does not permit full utilization of the many advantages of digital signal processing and rapid economic pay-off as analog back-up systems or parallel standby computers must often be provided to cover possible breakdowns in the central computer. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output mo dules, can be assembled into more cost-effective process microcompu ters.
Download or read book Introduction to Control System Design First Edition written by Harry Kwatny and published by Cognella Academic Publishing. This book was released on 2020-05-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Control System Design equips students with the basic concepts, tools, and knowledge they need to effectively design automatic control systems. The text not only teaches readers how to design a control system, it inspires them to innovate and expand current methods to address new automation technology challenges and opportunities. The text is designed to support a two-quarter/semester course and is organized into two main parts. Part I covers basic linear system analysis and model-assembly concepts. It presents readers with a short history of control system design and introduces basic control concepts using first-order and second order-systems. Additional chapters address the modeling of mechanical and electrical systems, as well as assembling complex models using subsystem interconnection tools. Part II focuses on linear control system design. Students learn the fundamentals of feedback control systems; stability, regulation, and root locus design; time delay, plant uncertainty, and robust stability; and state feedback and linear quadratic optimization. The final chapter covers observer theory and output feedback control and reformulates the linear quadratic optimization problem as the more general H2 problem.
Download or read book Digital Control Systems written by Benjamin C. Kuo and published by . This book was released on 2007 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Control Applications Illustrated with MATLAB written by Hemchandra Madhusudan Shertukde and published by CRC Press. This book was released on 2015-02-13 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Control Applications Illustrated with MATLAB covers the modeling, analysis, and design of linear discrete control systems. Illustrating all topics using the micro-computer implementation of digital controllers aided by MATLAB, Simulink, and FEEDBACK