Download or read book Digital Control in Power Electronics written by Simone Buso and published by Morgan & Claypool Publishers. This book was released on 2015-05-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the reader, whether an electrical engineering student in power electronics or a design engineer, a selection of power converter control problems and their basic digital solutions, based on the most widespread digital control techniques. The presentation is primarily focused on different applications of the same power converter topology, the half-bridge voltage source inverter, considered both in its single- and three-phase implementation. This is chosen as the test case because, besides being simple and well known, it allows the discussion of a significant spectrum of the most frequently encountered digital control applications in power electronics, from digital pulse width modulation (DPWM) and space vector modulation (SVM), to inverter output current and voltage control, ending with the relatively more complex VSI applications related to the so called smart-grid scenario. This book aims to serve two purposes: (1) to give a basic, introductory knowledge of the digital control techniques applied to power converters; and (2) to raise the interest for discrete time control theory, stimulating new developments in its application to switching power converters.
Download or read book Digital Control in Power Electronics written by Simone Buso and published by Springer Nature. This book was released on 2007-12-31 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the reader, whether an electrical engineering student in power electronics or a design engineer, some typical power converter control problems and their basic digital solutions, based on the most widespread digital control techniques. The presentation is focused on different applications of the same power converter topology, the half-bridge voltage source inverter, considered both in its single- and three-phase implementation. This is chosen as the case study because, besides being simple and well known, it allows the discussion of a significant spectrum of the more frequently encountered digital control applications in power electronics, from digital pulse width modulation (DPWM) and space vector modulation (SVM), to inverter output current and voltage control. The book aims to serve two purposes: to give a basic, introductory knowledge of the digital control techniques applied to power converters, and to raise the interest for discrete time control theory, stimulating new developments in its application to switching power converters.
Download or read book Digital Control of High Frequency Switched Mode Power Converters written by Luca Corradini and published by John Wiley & Sons. This book was released on 2015-07-10 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Control of Electrical Drives written by Slobodan N. Vukosavic and published by Springer Science & Business Media. This book was released on 2007-07-26 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides broad insights into problems of coding control algorithms on a DSP platform. - Includes a set of Simulink simulation files (source codes) which permits readers to envisage the effects of control solutions on the overall motion control system. -bridges the gap between control analysis and industrial practice.
Download or read book Digital Signal Processing in Power Electronics Control Circuits written by Krzysztof Sozański and published by Springer Science & Business Media. This book was released on 2013-07-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many digital control circuits in current literature are described using analog transmittance. This may not always be acceptable, especially if the sampling frequency and power transistor switching frequencies are close to the band of interest. Therefore, a digital circuit is considered as a digital controller rather than an analog circuit. This helps to avoid errors and instability in high frequency components. Digital Signal Processing in Power Electronics Control Circuits covers problems concerning the design and realization of digital control algorithms for power electronics circuits using digital signal processing (DSP) methods. This book bridges the gap between power electronics and DSP. The following realizations of digital control circuits are considered: digital signal processors, microprocessors, microcontrollers, programmable digital circuits. Discussed in this book is signal processing, starting from analog signal acquisition, through its conversion to digital form, methods of its filtration and separation, and ending with pulse control of output power transistors. The book is focused on two applications for the considered methods of digital signal processing: an active power filter and a digital class D power amplifier. The major benefit to readers is the acquisition of specific knowledge concerning discussions on the processing of signals from voltage or current sensors using a digital signal processor and to the signals controlling the output inverter transistors. Included are some Matlab examples for illustration of the considered problems.
Download or read book Digital Power Electronics and Applications written by Fang Lin Luo and published by Elsevier. This book was released on 2010-07-20 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to describe the theory of Digital Power Electronics and its applications. The authors apply digital control theory to power electronics in a manner thoroughly different from the traditional, analog control scheme. In order to apply digital control theory to power electronics, the authors define a number of new parameters, including the energy factor, pumping energy, stored energy, time constant, and damping time constant. These parameters differ from traditional parameters such as the power factor, power transfer efficiency, ripple factor, and total harmonic distortion. These new parameters result in the definition of new mathematical modeling: • A zero-order-hold (ZOH) is used to simulate all AC/DC rectifiers. • A first-order-hold (FOH) is used to simulate all DC/AC inverters. • A second-order-hold (SOH) is used to simulate all DC/DC converters. • A first-order-hold (FOH) is used to simulate all AC/AC (AC/DC/AC) converters. Presents most up-to-date methods of analysis and control algorithms for developing power electronic converters and power switching circuits Provides an invaluable reference for engineers designing power converters, commercial power supplies, control systems for motor drives, active filters, etc. Presents methods of analysis not available in other books
Download or read book Integrated Power Electronic Converters and Digital Control written by Ali Emadi and published by CRC Press. This book was released on 2017-12-19 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the demand for higher efficiencies, smaller output ripple, and smaller converter size for modern power electronic systems, integrated power electronic converters could soon replace conventional switched-mode power supplies. Synthesized integrated converters and related digital control techniques address problems related to cost, space, flexibility, energy efficiency, and voltage regulation—the key factors in digital power management and implementation. Meeting the needs of professionals working in power electronics, as well as advanced engineering students, Integrated Power Electronic Converters and Digital Control explores the many benefits associated with integrated converters. This informative text details boost type, buck type, and buck-boost type integrated topologies, as well as other integrated structures. It discusses concepts behind their operation as well specific applications. Topics discussed include: Isolated DC-DC converters such as flyback, forward, push-pull, full-bridge, and half-bridge Power factor correction and its application Definition of the integrated switched-mode power supplies Steady-state analysis of the boost integrated flyback rectifier energy storage converter Dynamic analysis of the buck integrated forward converter Digital control based on the use of digital signal processors (DSPs) With innovations in digital control becoming ever more pervasive, system designers continue to introduce products that integrate digital power management and control integrated circuit solutions, both hybrid and pure digital. This detailed assessment of the latest advances in the field will help anyone working in power electronics and related industries stay ahead of the curve.
Download or read book Control in Power Electronics written by Marian P. Kazmierkowski and published by Elsevier. This book was released on 2002-08-30 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors were originally brought together to share research and applications through the international Danfoss Professor Programme at Aalborg University in Denmark. Personal computers would be unwieldy and inefficient without power electronic dc supplies. Portable communication devices and computers would also be impractical. High-performance lighting systems, motor controls, and a wide range of industrial controls depend on power electronics. In the near future we can expect strong growth in automotive applications, dc power supplies for communication systems, portable applications, and high-end converters. We are approaching a time when all electrical energy will be processed and controlled through power electronics somewhere in the path from generation to end use. The most up-to-date information available is presented in the text Written by a world renowned leader in the field
Download or read book Digital Control in Power Electronics written by Simone Buso and published by Morgan & Claypool. This book was released on 2006 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Control in Power Electronics presents students of electrical engineering a basic introduction to typical power converter control problems, their digital solutions, and the most widespread digital control techniques. Although the presentation has been limited to a single converter topology (the half bridge voltage source inverter), the control topics represent a significant spectrum of the more frequently encountered digital control applications in power electronics. Authors Paolo Mattavelli and Simone Buso introduce the reader to basic control problems in power electronic circuits in order to illustrate widely applied digital solutions to these problems. They also aim to raise students' awareness of discrete time control theory, stimulating new developments in its application to power converters.
Download or read book Digital Control in Power Electronics 2nd Edition written by Simone Buso and published by Springer Nature. This book was released on 2022-05-31 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the reader, whether an electrical engineering student in power electronics or a design engineer, a selection of power converter control problems and their basic digital solutions, based on the most widespread digital control techniques. The presentation is primarily focused on different applications of the same power converter topology, the half-bridge voltage source inverter, considered both in its single- and three-phase implementation. This is chosen as the test case because, besides being simple and well known, it allows the discussion of a significant spectrum of the most frequently encountered digital control applications in power electronics, from digital pulse width modulation (DPWM) and space vector modulation (SVM), to inverter output current and voltage control, ending with the relatively more complex VSI applications related to the so called smart-grid scenario. This book aims to serve two purposes: (1) to give a basic, introductory knowledge of the digital control techniques applied to power converters; and (2) to raise the interest for discrete time control theory, stimulating new developments in its application to switching power converters.
Download or read book Fundamentals of Power Electronics written by Robert W. Erickson and published by Springer Nature. This book was released on 2020-07-14 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Power Electronics, Third Edition, is an up-to-date and authoritative text and reference book on power electronics. This new edition retains the original objective and philosophy of focusing on the fundamental principles, models, and technical requirements needed for designing practical power electronic systems while adding a wealth of new material. Improved features of this new edition include: new material on switching loss mechanisms and their modeling; wide bandgap semiconductor devices; a more rigorous treatment of averaging; explanation of the Nyquist stability criterion; incorporation of the Tan and Middlebrook model for current programmed control; a new chapter on digital control of switching converters; major new chapters on advanced techniques of design-oriented analysis including feedback and extra-element theorems; average current control; new material on input filter design; new treatment of averaged switch modeling, simulation, and indirect power; and sampling effects in DCM, CPM, and digital control. Fundamentals of Power Electronics, Third Edition, is intended for use in introductory power electronics courses and related fields for both senior undergraduates and first-year graduate students interested in converter circuits and electronics, control systems, and magnetic and power systems. It will also be an invaluable reference for professionals working in power electronics, power conversion, and analog and digital electronics.
Download or read book Introduction to Microcontroller Programming for Power Electronics Control Applications written by Mattia Rossi and published by CRC Press. This book was released on 2021-09-29 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: develops key concepts from scratch, including a brief review of control theory and modeling strategies for power electronic-based systems focuses on the LaunchPadTM F28069M board from Texas InstrumentsTM to provide the reader some basic programming strategies proposes several control problems in terms of power management of RL and RLC loads (e.g. DC-DC converters) and closed-loop control of DC motors examines control schemes as well as the working principles of power converter topologies needed to drive the systems under investigation includes exercises while presenting a processor-in-the loop (PIL) technique to emulate the dynamics of complex systems
Download or read book Digital Control In Power Electronics written by S. Morgan Buso and published by . This book was released on 2006 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control of Power Electronic Converters and Systems written by Frede Blaabjerg and published by Academic Press. This book was released on 2018-01-25 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Power Electronic Converters and Systems examines the theory behind power electronic converter control, including operation, modeling and control of basic converters. The book explores how to manipulate components of power electronics converters and systems to produce a desired effect by controlling system variables. Advances in power electronics enable new applications to emerge and performance improvement in existing applications. These advances rely on control effectiveness, making it essential to apply appropriate control schemes to the converter and system to obtain the desired performance. Discusses different applications and their control Explains the most important controller design methods both in analog and digital Describes different important applications to be used in future industrial products Covers voltage source converters in significant detail Demonstrates applications across a much broader context
Download or read book Control Systems for Power Electronics written by Mahesh Patil and published by Springer. This book was released on 2015-04-01 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of the book covers most of the aspects as a primer on power electronics starting from a simple diode bridge to a DC-DC convertor using PWM control. The thyristor-bridge and the mechanism of designing a closed loop system are discussed in chapter one, two and three. The concepts are applied in the fourth chapter as a case study for buck converter which uses MOSFETs as switching devices and the closed loop system is elaborated in the fifth chapter. Chapter six is focused on the embedded system basics and the implementation of controls in the digital domain. Chapter seven is a case study of application of an embedded control system for a DC motor. With this book, the reader will find it easy to work on the practical control systems with microcontroller implementation. The core intent of this book is to help gain an accelerated learning path to practical control system engineering and transform control theory to an implementable control system through electronics. Illustrations are provided for most of the examples with fundamental mathematics along with simulations of the systems with their respective equations and stability calculations.
Download or read book Sliding Mode Controllers for Power Electronic Converters written by Axaykumar Mehta and published by Springer. This book was released on 2018-12-13 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes a proportional integral type sliding function, which does not facilitate the finite reaching and hence the responses of the load voltage results in an exponential steady state. To facilitate finite time reaching, it also presents the new Integral Sliding Mode Control with Finite Time Reaching (ISMCFTR). The book also extends the application of the proposed controller to another type of PEC, the DC-DC Boost converter, and also proposes the PI type sliding surface for the Zeta converter, which is non-inverting type Buck Boost converter. An important source of practical implementations, it presents practical implementations as simulation and experimental results to demonstrate the efficacy of the converter.
Download or read book Modeling and Control of Power Electronic Converters for Microgrid Applications written by Yang Han and published by Springer Nature. This book was released on 2021-08-27 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of power electronic converter modeling and control, digital simulation, and experimental studies in the area of renewable energy systems and AC/DC microgrid. Recent advanced control methods for voltage source inverters (VSIs) and the hierarchical controlled islanded microgrid are discussed, including the mathematical modeling, controller synthesis, parameter selection and multi-scale stability analysis, and consensus-based control strategies for the microgrid and microgrid clusters. The book will be an invaluable technical reference for practicing engineers and researchers working in the areas of renewable energy, power electronics, energy internet, and smart grid. It can also be utilized as reference book for undergraduate and postgraduate students in electrical engineering.
