Download or read book Diffusion in Solid Metals and Alloys Diffusion in festen Metallen und Legierungen written by H. Bakker and published by Springer. This book was released on 1990-12-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest in diffusion in solids is as old as physical metallurgy or materials science. It stems from application-oriented as well as from scientific reasons. First, a knowledge of diffusion is basic to an understanding of many microstructural changes that occur in solid matter at elevated temperatures. For processes like phase transformations, precipitation or dissolution of a second phase, recrystallization, oxidation, creep, annealing etc., solid state diffusion is fundamental and ubiquitous. The second reason for studying diffusion is to learn more about how atoms move in solid matter. Volume III/26 presents for the first time a comprehensive collection of diffusion data for solid metals and alloys. The critical compilation of data has resulted in tables and series of diagrams which show in 13 chapters data for the following properties: Self- and impurity-diffusion in metallic elements, self-diffusion in homogeneous binary alloys, chemical diffusion in binary and ternary alloys, diffusion in amorphous alloys, diffusion of interstitial foreign atoms like hydrogen, carbon, oxygen and nitrogen in metallic elements, mass and pressure dependence of diffusion, diffusion along dislocations, grain and interphase boundary diffusion, and diffusion on surfaces.

Download or read book Diffusion in Solids written by Helmut Mehrer and published by Springer Science & Business Media. This book was released on 2007-07-24 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the central aspects of diffusion in solids, and goes on to provide easy access to important information about diffusion in metals, alloys, semiconductors, ion-conducting materials, glasses and nanomaterials. Coverage includes diffusion-controlled phenomena including ionic conduction, grain-boundary and dislocation pipe diffusion. This book will benefit graduate students in such disciplines as solid-state physics, physical metallurgy, materials science, and geophysics, as well as scientists in academic and industrial research laboratories.

Download or read book An Introduction to Solid State Diffusion written by Richard J. Borg and published by Elsevier. This book was released on 2012-12-02 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energetics and mechanisms of diffusion control the kinetics of such diverse phenomena as the fabrication of semiconductors and superconductors, the tempering of steel, geological metamorphism, the precipitation hardening of nonferrous alloys and corrosion of metals and alloys. This work explains the fundamentals of diffusion in the solid state at a level suitable for upper-level undergraduate and beginning graduate students in materials science, metallurgy, mineralogy, and solid state physics and chemistry. A knowledge of physical chemistry such as is generally provided by a one-year undergraduate course is a prerequisite, though no detailed knowledge of solid state physics or crystallography is required.

Download or read book Diffusion in Crystalline Solids written by G E Murch and published by Academic Press. This book was released on 2012-12-02 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diffusion in Crystalline Solids addresses some of the most active areas of research on diffusion in crystalline solids. Topics covered include measurement of tracer diffusion coefficients in solids, diffusion in silicon and germanium, atom transport in oxides of the fluorite structure, tracer diffusion in concentrated alloys, diffusion in dislocations, grain boundary diffusion mechanisms in metals, and the use of the Monte Carlo Method to simulate diffusion kinetics. This book is made up of eight chapters and begins with an introduction to the measurement of diffusion coefficients with radioisotopes. The following three chapters consider diffusion in materials of substantial technological importance such as silicon and germanium. Atomic transport in oxides of the fluorite structure is described, and diffusion in concentrated alloys, including intermetallic compounds, is analyzed. The next two chapters delve into diffusion along short-circuiting paths, focusing on the effect of diffusion down dislocations on the form of the tracer concentration profile. The book also discusses the mechanisms of diffusion in grain boundaries in metals by invoking considerable work done on grain-boundary structure. The last two chapters are concerned with computer simulation, paying particular attention to machine calculations and the Monte Carlo method. The book concludes by exploring the fundamental atomic migration process and presenting some state-of-the-art calculations for defect energies and the topology of the saddle surface. Students and researchers of material science will find this book extremely useful.

Download or read book Handbook of Solid State Diffusion Volume 1 written by Aloke Paul and published by Elsevier. This book was released on 2017-04-11 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Solid State Diffusion, Volume 1: Diffusion Fundamentals and Techniques covers the basic fundamentals, techniques, applications, and latest developments in the area of solid-state diffusion, offering a pedagogical understanding for students, academicians, and development engineers. Both experimental techniques and computational methods find equal importance in the first of this two-volume set. Volume 1 covers the fundamentals and techniques of solid-state diffusion, beginning with a comprehensive discussion of defects, then different analyzing methods, and finally concluding with an exploration of the different types of modeling techniques. - Presents a handbook with a short mathematical background and detailed examples of concrete applications of the sophisticated methods of analysis - Enables readers to learn the basic concepts of experimental approaches and the computational methods involved in solid-state diffusion - Covers bulk, thin film, and nanomaterials - Introduces the problems and analysis in important materials systems in various applications - Collates contributions from academic and industrial problems from leading scientists involved in developing key concepts across the globe

Download or read book Diffusion in Metals and Alloys written by F.J. Kedves and published by Trans Tech Publications Ltd. This book was released on 1983-01-01 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: DIMETA 82

Download or read book The Theory of Transformations in Metals and Alloys written by John Christian and published by Newnes. This book was released on 2002-12-10 with total page 1202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.

Download or read book Phase Transformations in Metals and Alloys Third Edition Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 1992-09-10 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade since the first edition of this popular text was published, the metallurgical field has undergone rapid developments in many sectors. Nonetheless, the underlying principles governing these developments remain the same. A textbook that presents these advances within the context of the fundamentals is greatly needed by instructors in the field Phase Transformations in Metals and Alloys, Second Edition maintains the simplicity that undergraduate instructors and students have come to appreciate while updating and expanding coverage of recently developed methods and materials. The book is effectively divided into two parts. The beginning chapters contain the background material necessary for understanding phase transformations - thermodynamics, kinetics, diffusion theory and the structure and properties of interfaces. The following chapters deal with specific transformations - solidification, diffusional transformation in solids and diffusionless transformation. Case studies of engineering alloys are incorporated to provide a link between theory and practice. New additions include an extended list of further reading at the end of each chapter and a section containing complete solutions to all exercises in the book Designed for final year undergraduate and postgraduate students of metallurgy, materials science, or engineering materials, this is an ideal textbook for both students and instructors.

Download or read book Mechanisms of Diffusional Phase Transformations in Metals and Alloys written by Hubert I. Aaronson and published by CRC Press. This book was released on 2016-04-19 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed by the late metallurgy professor and master experimentalist Hubert I. Aaronson, this collection of lecture notes details the fundamental principles of phase transformations in metals and alloys upon which steel and other metals industries are based. Mechanisms of Diffusional Phase Transformations in Metals and Alloys is devoted to solid-s

Download or read book Diffusion in Materials written by A.L. Laskar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the proceedings of the NATO Advanced Study Institute, "Diffusion in Materials", held at "Centre Paul Langevin", Aussois, during March 12-25, 1989. There were 105 participants of whom 24 were lecturers and members of the international advisory committee. In addition to the participants from NATO countries, a small number of participants came from Australia, Hungary, Poland and Tunisia. The principal aim of the organizing committee was to bring together scientists of wide interest and expertise in the field of diffusion and to familiarize the young workers in material science with the wide range of theoretical models and methods and of experimental techniques . The Institute was concerned with the study of diffusion and related phenomena in solids which are at the cutting edge of novel technologies. The discussion of basic theories of defects in solids and their transport, with their applications in the understanding of diffusion processes in "simple solids" was followed by the wide range of current theoretical models and methods, experimental techniques and their potential. The lectures on the diffusion in specific materials included : metals, dilute and concentrated alloys, simple and compound semiconductors, stoichiometric and non-stoichiometric oxides, high-Tc compounds, carbides, nitrides, silicates, conducting polymers and thin films, ionic, superionic, amorphous and irradiated materials.

Download or read book Diffusion Processes in Advanced Technological Materials written by Devendra Gupta and published by Springer Science & Business Media. This book was released on 2013-01-15 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new game book for understanding atoms at play aims to document diffusion processes and various other properties operative in advanced technological materials. Diffusion in functional organic chemicals, polymers, granular materials, complex oxides, metallic glasses, and quasi-crystals among other advanced materials is a highly interactive and synergic phenomenon. A large variety of atomic arrangements are possible. Each arrangement affects the performance of these advanced, polycrystalline multiphase materials used in photonics, MEMS, electronics, and other applications of current and developing interest. This book is written by pioneers in industry and academia for engineers, chemists, and physicists in industry and academia at the forefront of today's challenges in nanotechnology, surface science, materials science, and semiconductors.

Download or read book An Introduction to Fundamentals of Diffusion in Solid State Materials written by Reza Ghomashchi and published by CRC Press. This book was released on 2024-12-24 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diffusion, the movement of atoms in a material, is an integral part of many metallurgical and materials treatment processes. Understanding diffusion mechanisms helps to control and improve materials properties. This book offers a comprehensive overview of diffusion in the synthesis and analysis of materials (metals and non‐metals) from the fundamentals through applications. Discusses defects in materials, fundamentals of the diffusion process, and different diffusion mechanisms active in metallic alloys Describes diffusion within non‐metallic materials, including ceramics, polymers, and semiconducting materials, with special emphasis on silicon Covers diffusion along high‐energy paths, short‐circuiting diffusion, such as grain boundaries, dislocations, and materials surface Explores diffusion under thermal and electrical gradients and explains how this information is useful for materials purification Details the application of diffusion on carbides during the thermal and thermomechanical treatments of steels Includes problems and solutions for each chapter to reinforce reader’s comprehension Written with less emphasis on complex mathematical equations, this text is accessible to researchers and students in materials, mechanical, and related engineering disciplines studying the phenomenon of diffusion in materials and its application in the engineering of materials.

Download or read book Handbook of Thermal Analysis and Calorimetry written by and published by Elsevier. This book was released on 2018-03-12 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermal Analysis and Calorimetry: Recent Advances, Techniques and Applications, Volume Six, Second Edition, presents the latest in a series that has been well received by the thermal analysis and calorimetry community. This volume covers recent advances in techniques and applications that complement the earlier volumes. There has been tremendous progress in the field in recent years, and this book puts together the most high-impact topics selected for their popularity by new editors Sergey Vyazovkin, Nobuyoshi Koga and Christoph Schick—all editors of Thermochimica Acta. Among the important new techniques covered are biomass conversion; sustainable polymers; polymer nanocompsoties; nonmetallic glasses; phase change materials; propellants and explosives; applications to pharmaceuticals; processes in ceramics, metals, and alloys; ionic liquids; fast-scanning calorimetry, and more. - Features 19 all-new chapters to bring readers up to date on the current status of the field - Provides a broad overview of recent progress in the most popular techniques and applications - Includes chapters authored by a recognized leader in each field and compiled by a new team of editors, each with at least 20 years of experience in the field of thermal analysis and calorimetry - Enables applications across a wide range of modern materials, including polymers, metals, alloys, ceramics, energetics and pharmaceutics - Overviews the current status of the field and summarizes recent progress in the most popular techniques and applications

Download or read book Atomic Transport in Solids written by A. R. Allnatt and published by Cambridge University Press. This book was released on 2003-10-30 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the fundamental statistical theory of atomic transport in crystalline solids, that is the means by which processes occurring at the atomic level are related to macroscopic transport coefficients and other observable quantities. The cornerstones of the authors' treatment are (i) the physical concepts of lattice defects, (ii) the phenomenological description provided by non-equilibrium thermodynamics and (iii) the various methods of statistical mechanics used to link these (kinetic theory, random-walk theory, linear response theory etc.). The book is primarily concerned with transport in the body of crystal lattices and not with transport on surfaces, within grain boundaries or along dislocations, although much of the theory here presented can be applied to these low-dimensional structures when they are atomically well ordered and regular.

Download or read book Solidification and Crystallization Processing in Metals and Alloys written by Hasse Fredriksson and published by John Wiley & Sons. This book was released on 2012-07-02 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solidification and Crystallization Processing in Metals and Alloys Hasse Fredriksson KTH, Royal Institute of Technology, Stockholm, Sweden Ulla Åkerlind University of Stockholm, Sweden Solidification or crystallization occurs when atoms are transformed from the disordered liquid state to the more ordered solid state, and is fundamental to metals processing. Conceived as a companion volume to the earlier works, Materials Processing during Casting (2006) and Physics of Functional Materials (2008), this book analyzes solidification and crystallization processes in depth. Starting from the thermodynamic point of view, it gives a complete description, taking into account kinetics and mass transfer, down to the final structure. Importantly, the book shows the relationship between the theory and the experimental results. Topics covered include: Fundamentals of thermodynamics Properties of interfaces Nucleation Crystal growth - in vapours, liquids and melts Heat transport during solidification processes Solidification structures - faceted, dendritic, eutectic and peritectic Metallic glasses and amorphous alloy melts Solidification and Crystallization Processing in Metals and Alloys features many solved examples in the text, and exercises (with answers) for students. Intended for Masters and PhD students as well as researchers in Materials Science, Engineering, Chemistry and Metallurgy, it is also a valuable resource for engineers in industry.

Download or read book Fundamentals of Radiation Materials Science written by GARY S. WAS and published by Springer. This book was released on 2016-07-08 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised second edition of this established text offers readers a significantly expanded introduction to the effects of radiation on metals and alloys. It describes the various processes that occur when energetic particles strike a solid, inducing changes to the physical and mechanical properties of the material. Specifically it covers particle interaction with the metals and alloys used in nuclear reactor cores and hence subject to intense radiation fields. It describes the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys. Updated throughout, some major enhancements for the new edition include improved treatment of low- and intermediate-energy elastic collisions and stopping power, expanded sections on molecular dynamics and kinetic Monte Carlo methodologies describing collision cascade evolution, new treatment of the multi-frequency model of diffusion, numerous examples of RIS in austenitic and ferritic-martensitic alloys, expanded treatment of in-cascade defect clustering, cluster evolution, and cluster mobility, new discussion of void behavior near grain boundaries, a new section on ion beam assisted deposition, and reorganization of hardening, creep and fracture of irradiated materials (Chaps 12-14) to provide a smoother and more integrated transition between the topics. The book also contains two new chapters. Chapter 15 focuses on the fundamentals of corrosion and stress corrosion cracking, covering forms of corrosion, corrosion thermodynamics, corrosion kinetics, polarization theory, passivity, crevice corrosion, and stress corrosion cracking. Chapter 16 extends this treatment and considers the effects of irradiation on corrosion and environmentally assisted corrosion, including the effects of irradiation on water chemistry and the mechanisms of irradiation-induced stress corrosion cracking. The book maintains the previous style, concepts are developed systematically and quantitatively, supported by worked examples, references for further reading and end-of-chapter problem sets. Aimed primarily at students of materials sciences and nuclear engineering, the book will also provide a valuable resource for academic and industrial research professionals. Reviews of the first edition: "...nomenclature, problems and separate bibliography at the end of each chapter allow to the reader to reach a straightforward understanding of the subject, part by part. ... this book is very pleasant to read, well documented and can be seen as a very good introduction to the effects of irradiation on matter, or as a good references compilation for experimented readers." - Pauly Nicolas, Physicalia Magazine, Vol. 30 (1), 2008 “The text provides enough fundamental material to explain the science and theory behind radiation effects in solids, but is also written at a high enough level to be useful for professional scientists. Its organization suits a graduate level materials or nuclear science course... the text was written by a noted expert and active researcher in the field of radiation effects in metals, the selection and organization of the material is excellent... may well become a necessary reference for graduate students and researchers in radiation materials science.” - L.M. Dougherty, 07/11/2008, JOM, the Member Journal of The Minerals, Metals and Materials Society.

Download or read book Diffusion in Solids written by A.S. Nowick and published by Elsevier. This book was released on 2012-12-02 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diffusion in Solids: Recent Developments provides an overview of diffusion in crystalline solids. This book discusses the various aspects of the theory of diffusion. Organized into nine chapters, this volume starts with a discussion on the process of diffusion in solids. This book then examines the tools that supplement the conventional diffusion measurements, including electromigration, ionic conductivity, isotope effects, and vacancy wind effects. This text explores the molecular dynamic calculation by which the interatomic forces must be assumed. Other chapters discuss the method of measurement of the isotope effect on diffusion, which is the most powerful method of determining relevant information about the correlation factor. This volume extensively discusses diffusion in organic and amorphous materials, as well as interstitial diffusion in solids. The final chapter deals with ionic motion and diffusion in various groups of materials called fast ionic conductors. Solid-state physicists, materials scientists, physical chemists, and electrochemists will find this book extremely useful.