Download or read book Diffusion in Crystalline Solids written by G E Murch and published by Academic Press. This book was released on 2012-12-02 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diffusion in Crystalline Solids addresses some of the most active areas of research on diffusion in crystalline solids. Topics covered include measurement of tracer diffusion coefficients in solids, diffusion in silicon and germanium, atom transport in oxides of the fluorite structure, tracer diffusion in concentrated alloys, diffusion in dislocations, grain boundary diffusion mechanisms in metals, and the use of the Monte Carlo Method to simulate diffusion kinetics. This book is made up of eight chapters and begins with an introduction to the measurement of diffusion coefficients with radioisotopes. The following three chapters consider diffusion in materials of substantial technological importance such as silicon and germanium. Atomic transport in oxides of the fluorite structure is described, and diffusion in concentrated alloys, including intermetallic compounds, is analyzed. The next two chapters delve into diffusion along short-circuiting paths, focusing on the effect of diffusion down dislocations on the form of the tracer concentration profile. The book also discusses the mechanisms of diffusion in grain boundaries in metals by invoking considerable work done on grain-boundary structure. The last two chapters are concerned with computer simulation, paying particular attention to machine calculations and the Monte Carlo method. The book concludes by exploring the fundamental atomic migration process and presenting some state-of-the-art calculations for defect energies and the topology of the saddle surface. Students and researchers of material science will find this book extremely useful.
Download or read book Diffusion in Solids written by A.S. Nowick and published by Elsevier. This book was released on 2012-12-02 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diffusion in Solids: Recent Developments provides an overview of diffusion in crystalline solids. This book discusses the various aspects of the theory of diffusion. Organized into nine chapters, this volume starts with a discussion on the process of diffusion in solids. This book then examines the tools that supplement the conventional diffusion measurements, including electromigration, ionic conductivity, isotope effects, and vacancy wind effects. This text explores the molecular dynamic calculation by which the interatomic forces must be assumed. Other chapters discuss the method of measurement of the isotope effect on diffusion, which is the most powerful method of determining relevant information about the correlation factor. This volume extensively discusses diffusion in organic and amorphous materials, as well as interstitial diffusion in solids. The final chapter deals with ionic motion and diffusion in various groups of materials called fast ionic conductors. Solid-state physicists, materials scientists, physical chemists, and electrochemists will find this book extremely useful.
Download or read book Diffusion in Solids written by Helmut Mehrer and published by Springer Science & Business Media. This book was released on 2007-07-24 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the central aspects of diffusion in solids, and goes on to provide easy access to important information about diffusion in metals, alloys, semiconductors, ion-conducting materials, glasses and nanomaterials. Coverage includes diffusion-controlled phenomena including ionic conduction, grain-boundary and dislocation pipe diffusion. This book will benefit graduate students in such disciplines as solid-state physics, physical metallurgy, materials science, and geophysics, as well as scientists in academic and industrial research laboratories.
Download or read book Transformations of Materials written by Dimitri D Vvedensky and published by Morgan & Claypool Publishers. This book was released on 2019-09-30 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase transformations are among the most intriguing and technologically useful phenomena in materials, particularly with regard to controlling microstructure. After a review of thermodynamics, this book has chapters on Brownian motion and the diffusion equation, diffusion in solids based on transition-state theory, spinodal decomposition, nucleation and growth, instabilities in solidification, and diffusionless transformations. Each chapter includes exercises whose solutions are available in a separate manual. This book is based on the notes from a graduate course taught in the Centre for Doctoral Training in the Theory and Simulation of Materials. The course was attended by students with undergraduate degrees in physics, mathematics, chemistry, materials science, and engineering. The notes from this course, and this book, were written to accommodate these diverse backgrounds.
Download or read book Diffusion in Solids written by Martin Eden Glicksman and published by Wiley-Interscience. This book was released on 1999-11-30 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a modern treatment of diffusion in solids, covering such core topics as the transport of mass through the lattice of a crystalline solid. Part I of the book develops basic concepts in diffusion field theory and illustrates them with several applications, while Part II focuses on key solid-state principles needed to apply diffusion theory to real materials.
Download or read book Defects and Diffusion in Solids written by Stanisław Mrowec and published by Elsevier Science & Technology. This book was released on 1980 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diffusion in Solids written by Martin Eden Glicksman and published by John Wiley & Sons. This book was released on 2022-09-14 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a modern treatment of diffusion in solids, covering such core topics as the transport of mass through the lattice of a crystalline solid. Part I of the book develops basic concepts in diffusion field theory and illustrates them with several applications, while Part II focuses on key solid-state principles needed to apply diffusion theory to real materials.
Download or read book Diffusion Processes in Advanced Technological Materials written by Devendra Gupta and published by Springer Science & Business Media. This book was released on 2013-01-15 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new game book for understanding atoms at play aims to document diffusion processes and various other properties operative in advanced technological materials. Diffusion in functional organic chemicals, polymers, granular materials, complex oxides, metallic glasses, and quasi-crystals among other advanced materials is a highly interactive and synergic phenomenon. A large variety of atomic arrangements are possible. Each arrangement affects the performance of these advanced, polycrystalline multiphase materials used in photonics, MEMS, electronics, and other applications of current and developing interest. This book is written by pioneers in industry and academia for engineers, chemists, and physicists in industry and academia at the forefront of today's challenges in nanotechnology, surface science, materials science, and semiconductors.
Download or read book Atomic Transport in Solids written by A. R. Allnatt and published by Cambridge University Press. This book was released on 2003-10-30 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the fundamental statistical theory of atomic transport in crystalline solids, that is the means by which processes occurring at the atomic level are related to macroscopic transport coefficients and other observable quantities. The cornerstones of the authors' treatment are (i) the physical concepts of lattice defects, (ii) the phenomenological description provided by non-equilibrium thermodynamics and (iii) the various methods of statistical mechanics used to link these (kinetic theory, random-walk theory, linear response theory etc.). The book is primarily concerned with transport in the body of crystal lattices and not with transport on surfaces, within grain boundaries or along dislocations, although much of the theory here presented can be applied to these low-dimensional structures when they are atomically well ordered and regular.
Download or read book An Introduction to Solid State Diffusion written by Richard J. Borg and published by Elsevier. This book was released on 2012-12-02 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energetics and mechanisms of diffusion control the kinetics of such diverse phenomena as the fabrication of semiconductors and superconductors, the tempering of steel, geological metamorphism, the precipitation hardening of nonferrous alloys and corrosion of metals and alloys. This work explains the fundamentals of diffusion in the solid state at a level suitable for upper-level undergraduate and beginning graduate students in materials science, metallurgy, mineralogy, and solid state physics and chemistry. A knowledge of physical chemistry such as is generally provided by a one-year undergraduate course is a prerequisite, though no detailed knowledge of solid state physics or crystallography is required.
Download or read book Diffusion in Solids written by Paul G. Shewmon and published by . This book was released on 1983 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition is an updated and revised version of the original text. It offers detailed descriptions of the methods available to predict the occurrence of diffusion in alloys subjected to various processes. Major topic areas covered include diffusion equations, atomic theory of diffusion, diffusion in dilute alloys, diffusion in a concentration gradient, diffusion in non-metals, high diffusivity paths, and thermo- and electro-transport. This is an excellent textbook for use in metallurgical and materials science and engineering education.
Download or read book diffusion in an through solids written by Richard Maling Barrer and published by CUP Archive. This book was released on with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diffusion in and through solids written by R.M. Barrer and published by Рипол Классик. This book was released on 1941 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diffusion in Solid Metals and Alloys Diffusion in festen Metallen und Legierungen written by H. Bakker and published by Springer. This book was released on 1990-12-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest in diffusion in solids is as old as physical metallurgy or materials science. It stems from application-oriented as well as from scientific reasons. First, a knowledge of diffusion is basic to an understanding of many microstructural changes that occur in solid matter at elevated temperatures. For processes like phase transformations, precipitation or dissolution of a second phase, recrystallization, oxidation, creep, annealing etc., solid state diffusion is fundamental and ubiquitous. The second reason for studying diffusion is to learn more about how atoms move in solid matter. Volume III/26 presents for the first time a comprehensive collection of diffusion data for solid metals and alloys. The critical compilation of data has resulted in tables and series of diagrams which show in 13 chapters data for the following properties: Self- and impurity-diffusion in metallic elements, self-diffusion in homogeneous binary alloys, chemical diffusion in binary and ternary alloys, diffusion in amorphous alloys, diffusion of interstitial foreign atoms like hydrogen, carbon, oxygen and nitrogen in metallic elements, mass and pressure dependence of diffusion, diffusion along dislocations, grain and interphase boundary diffusion, and diffusion on surfaces.
Download or read book Handbook of Solid State Diffusion Volume 1 written by Aloke Paul and published by Elsevier. This book was released on 2017-04-11 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Solid State Diffusion, Volume 1: Diffusion Fundamentals and Techniques covers the basic fundamentals, techniques, applications, and latest developments in the area of solid-state diffusion, offering a pedagogical understanding for students, academicians, and development engineers. Both experimental techniques and computational methods find equal importance in the first of this two-volume set. Volume 1 covers the fundamentals and techniques of solid-state diffusion, beginning with a comprehensive discussion of defects, then different analyzing methods, and finally concluding with an exploration of the different types of modeling techniques. Presents a handbook with a short mathematical background and detailed examples of concrete applications of the sophisticated methods of analysis Enables readers to learn the basic concepts of experimental approaches and the computational methods involved in solid-state diffusion Covers bulk, thin film, and nanomaterials Introduces the problems and analysis in important materials systems in various applications Collates contributions from academic and industrial problems from leading scientists involved in developing key concepts across the globe
Download or read book Diffusion in Solids written by Paul Shewmon and published by Springer. This book was released on 2016-12-06 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers detailed descriptions of the methods available to predict the occurrence of diffusion in alloys subjected to various processes. Major topic areas covered include diffusion equations, atomic theory of diffusion, diffusion in dilute alloys, diffusion in a concentration gradient, diffusion in non-metals, high diffusivity paths, and thermo- and electro-transport.
Download or read book Defects and Their Structure in Nonmetallic Solids written by B. Henderson and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Study Institute of which this volume is the proceedings was held at the University of Exeter during 24 August to 6 September 1975. There were seventy participants of whom eighteen were lecturers and members of the advisory committee. All NATO countries except Holland, Iceland and Portugal were re presented. In addition a small number of participants came from non-NATO countries Japan, Ireland and Switzerland. An aim of the organising committee was to bring together scientists of wide interests and expertise in the defect structure of insulators and semiconductors. Thus major emphases in the pro gramme concerned the use of spectroscopy and microscopy in revealing the structure of point defects and their aggregates, line defects as well as planar and volume defects. The lectures revealed that in general little is known of the fate of the interstitial in most irradiated solids. Nor are the dynamic properties of defects under stood in sufficient detail that one can state how point defects cluster and eventually become macroscopic defects. Although this book faithfully reproduces the material covered by the invited speakers, it does not really follow the flow of the lectures. This is because it seemed advisable for each lecturer to provide a single self-contained and authoritative manuscript, rather than a series of short articles corresponding to the lectures.
