Download or read book Diffusion in Ceramics written by Joshua Pelleg and published by Springer. This book was released on 2015-08-20 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides an introduction to changes that occur in solids such as ceramics, mainly at high temperatures, which are diffusion controlled, as well as presenting research data. Such changes are related to the kinetics of various reactions such as precipitation, oxidation and phase transformations, but are also related to some mechanical changes, such as creep. The book is composed of two parts, beginning with a look at the basics of diffusion according to Fick's Laws. Solutions of Fick’s second law for constant D, diffusion in grain boundaries and dislocations are presented along with a look at the atomistic approach for the random motion of atoms. In the second part, the author discusses diffusion in several technologically important ceramics. The ceramics selected are monolithic single phase ones, including: A12O3, SiC, MgO, ZrO2 and Si3N4. Of these, three refer to oxide ceramics (alumina, magnesia and zirconia). Carbide based ceramics are represented by the technologically very important Si-carbide and nitride based ceramics are represented by Si-nitride which has been important in high temperature ceramics and gas turbine applications. The author presents a clear, concise and relatively comprehensive treatment of diffusion in ceramics for use by those at an advanced undergraduate level and beyond. It supports understanding of the basic behavior of materials and how to relate observed physical properties to microscopic understanding. The book also provides researchers with a handy collation of data relating to diffusion in ceramics and supports a fundamental understanding of atomic movements.
Download or read book Diffusion in Ceramics written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 1999-05-17 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although this volume is ostensibly devoted to diffusion per se, it also covers ionic conduction because this phenomenon, in the often complex and charge-sensitive structures of many ceramics, usually gives important clues as to the routes taken by all migrating species. The definition of what constitutes a ceramic is also liberally interpreted here so as to include substances which are not normally used as such in the industrial sense. One obvious anomaly is the class of so-called room-temperature superconductors which, perversely, are expected to be used at the opposite end of the temperature scale to traditional ceramic applications. The coverage of research on oxides, carbides and nitrides herein is believed to be as complete as possible, while other possible candidates for inclusion are not necessarily to be found in the 'miscellaneous' section. Silicides, in particular, are notable by their absence.
Download or read book Diffusion in Ceramics written by and published by . This book was released on 1999 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although this volume is ostensibly devoted to diffusion per se, it also covers ionic conduction because this phenomenon, in the often complex and charge-sensitive structures of many ceramics, usually gives important clues as to the routes taken by all migrating species. The definition of what constitutes a ceramic is also liberally interpreted here so as to include substances which are not normally used as such in the industrial sense. One obvious anomaly is the class of so-called room-temperature superconductors which, perversely, are expected to be used at the opposite end of the temperature scale to traditional ceramic applications. The coverage of research on oxides, carbides and nitrides herein is believed to be as complete as possible, while other possible candidates for inclusion are not necessarily to be found in the 'miscellaneous' section. Silicides, in particular, are notable by their absence. Priority of coverage has also been given to experimental data, as usual, although the first qualitative observations of new phenomena, etc., may also be included. A wide range of readers will find the present compilation to be a handy summary of recent progress in the relevant fields, including the barely decade-old one of oxide superconductors.
Download or read book Defects and Diffusion in Ceramics 2003 written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2003-08-08 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This latest volume of the annual series contains over 900 selected abstracts of research in the field of ceramics (including, for this purpose, allotropes of carbon); reported between the appearance of Retrospective IV and about June 2003 (allowing for variations in publication dates).
Download or read book Defects and Diffusion in Ceramics written by and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surfaces and Interfaces of Ceramic Materials written by L.C. Dufour and published by Springer. This book was released on 2014-12-04 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the NATO Advanced Study Institute on Surfaces and Interfaces of Ceramic Materials, held on the Oleron island, France, in September 1988. This Institute was organized in nine months after receiving the agreement of the NATO Scientific Affairs Division. Despite this very short time, most of the lecturers contacted have accepted our invitation to prepare a specific talk. The meeting was held at "La Vieille Perrotine" on the Oleron island. This holiday village of the French CNRS is located near the Ocean in a natural area which contributed to create a very pleasant atmosphere favourable to develop interaction between the 91 participants in this Institute. First of all, the Institute was aimed at diffusing the foremost results on the characterization of and the role played by surfaces, grain boundaries and interfaces in preparation and overall properties of ceramic materials, mainly of oxide ceramics. Through its interdisciplinary character, the Institute was also aimed at developing interaction between scientists and engineers interested in basic and practical aspects of processing and use of ceramics.
Download or read book Defects and Diffusion in Ceramics XII written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2011-05-17 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This twelth volume in the series includes 589 abstracts of ceramics research papers, together with original papers on other major material groups, and theory: Studies of the EPR Parameters and Local Structure of Co2+ in ZnO, Structural and Electrical Changes in BIMNVOX Oxide-Ion Conductor, Effect of Film Thickness on Some Optical Properties of Sprayed Pyrolysis Cobalt Oxide Thin Films, A Novel Experimental Approach to Compatible Carbon Nanofiber Diffusion around Circular Carbon Micro-Post Surfaces, Structural Rigidity, Percolation and Transition-Temperature Study of the Ge19Se81-xSbx System, Physical Analysis of Structural Transformation in Ge-Incorporated a-SbxSe100-x System, Study of the Glass Transition Temperature of (Se100-xBix)90Te10 Alloys, A Boost-Up Method of MEMS-Bulk-Micromachining towards C-MEMS Fabrication for Sensing and Manipulating Bioparticles, Electrical and Dielectric Properties of Te15(Se100-xBix)85 Amorphous Glassy Alloys, Low-Power Operation of Pt/Porous Si Schottky-Diode Gas-Sensor through a Reduction in its Breakdown Voltage, Surface Composition Transformation of Thin Film based on Al Grown by CBE on the (001) GaAs Surface Due to Laser Assistance, Characterization and Properties of Iron/Silica-Sand-Nanoparticle Composites, Al-Film/Si-Substrate System Nanoscratching Response Based upon Molecular Dynamics Simulation in NEMS, Probing the Activation Migration Enthalpies of Dislocations in 2024 Aircraft Material using Nuclear and Electrical Techniques, A Numerical Simulation Approach to Convection, Buoyancy Effect, Microfiltration and Flow Analysis as an Influential Lead for Designing and Dimensioning in MEMS, Prediction of Transient Temperature Distribution, HAZ Width and Microstructural Analysis of Submerged Arc-Welded Structural Steel Plates, Evaluation of the Effect of Catalyst Pore-Size Distribution on the Effectiveness Factor in Ethylbenzene Dehydrogenation by Orthogonal Collocation.
Download or read book Defects and Diffusion in Ceramics written by D. J. Fisher and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second issue, following DDF164, to cover recent progress in this field. The contents are contiguous with those of DDF164, and extend to late November or December 1999 (depending upon journal publication dates). As usual, priority in abstracting has been given to the most accessible work and, in particular, to those papers which furnish original data or report important new techniques, phenomena or anomalies, although there is also extensive coverage of more qualitative features of diffusion and defect phenomena, and of the predictions of computer models. The issue of course also includes original papers on the topic at hand covering, in this case, the synthesis and properties of zirconia-based nanocrystalline powders and ceramics (R.E. Juárez, D.G. Lamas, G.E. Lascalea and N.E. Walsöe de Reca), the optical properties of hydrogenated amorphous silicon carbide films (W.K. Choi), the structures and optical properties of defects as related to photo-induced refractive index changes in Ge-doped silica glass (M. Fujimaki and Y. Ohki) and the effects of Li intercalation in zirconia films (A.K. Jonsson, M. Strømme Mattsson, G.A. Niklasson). As well as these ceramic-specific papers, the present issue contains timely papers on other materials, such as an analysis of Diffusion Mechanisms in Ni3Al, Ni3Ge and Ni3Ga (I.V. Belova and G.E. Murch) and molecular dynamics simulations of self-diffusion in GaAs (P. Murugan and K. Ramachandran). Altogether, this again makes the present work the most up-to-date and convenient source of information on current trends in the field of Defects and Diffusion. As well as these ceramic-specific papers, the present issue contains timely papers on other materials, such as an analysis of Diffusion Mechanisms in Ni3Al, Ni3Ge and Ni3Ga (I.V. Belova and G.E. Murch) and molecular dynamics simulations of self-diffusion in GaAs (P. Murugan and K. Ramachandran). Altogether, this again makes the present work the most up-to-date and convenient source of information on current trends in the field of Defects and Diffusion. As well as these ceramic-specific papers, the present issue contains timely papers on other materials, such as an analysis of Diffusion Mechanisms in Ni3Al, Ni3Ge and Ni3Ga (I.V. Belova and G.E. Murch) and molecular dynamics simulations of self-diffusion in GaAs (P. Murugan and K. Ramachandran). Altogether, this again makes the present work the most up-to-date and convenient source of information on current trends in the field of Defects and Diffusion.
Download or read book Materials Processing and Manufacturing Science written by Rajiv Asthana and published by Elsevier. This book was released on 2006-01-09 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Materials Science in Manufacturing focuses on materials science and materials processing primarily for engineering and technology students preparing for careers in manufacturing. The text also serves as a useful reference on materials science for the practitioner engaged in manufacturing as well as the beginning graduate student. Integrates theoretical understanding and current practices to provide a resource for students preparing for advanced study or career in industry. Also serves as a useful resource to the practitioner who works with diverse materials and processes, but is not a specialist in materials science. This book covers a wider range of materials and processes than is customary in the elementary materials science books. This book covers a wider range of materials and processes than is customary in the elementary materials science books. * Detailed explanations of theories, concepts, principles and practices of materials and processes of manufacturing through richly illustrated text * Includes new topics such as nanomaterials and nanomanufacturing, not covered in most similar works * Focuses on the interrelationship between Materials Science, Processing Science, and Manufacturing Technology
Download or read book Nanoinformatics written by Isao Tanaka and published by Springer. This book was released on 2018-01-15 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book brings out the state of the art on how informatics-based tools are used and expected to be used in nanomaterials research. There has been great progress in the area in which “big-data” generated by experiments or computations are fully utilized to accelerate discovery of new materials, key factors, and design rules. Data-intensive approaches play indispensable roles in advanced materials characterization. "Materials informatics" is the central paradigm in the new trend. "Nanoinformatics" is its essential subset, which focuses on nanostructures of materials such as surfaces, interfaces, dopants, and point defects, playing a critical role in determining materials properties. There have been significant advances in experimental and computational techniques to characterize individual atoms in nanostructures and to gain quantitative information. The collaboration of researchers in materials science and information science is growing actively and is creating a new trend in materials science and engineering.
Download or read book Processing of Crystalline Ceramics written by Hare and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the Proceedings of the November 7-9, 1977 Conference on PROCESSING OF CRYSTALLINE CERAMICS, held at North Carolina State University in Raleigh. It was the Fourteenth in a series of "University Conferences on Ceramic Science" initiated in 1964 and still coordinated by a founding group of four ceramic related institutions, of which North Carolina State University is a charter member, along with the University of California at Berkeley, Notre Dame University, and the New York State College of Ceramics at Alfred University. In addition, two other ceramic-oriented schools, the University of Florida and Case-Western Reserve University, have also hosted Conferences in the series. These research-oriented conferences, each uniquely concerned with a timely ceramic theme, have been well attended by audiences which typically were both inter national and interdisciplinary in character; their published Proceedings have been well received and are frequently cited. This three day conference was concerned with (a) scientific aspects of all process steps which must be combined and controlled effectively and sequentially in producing crystalline ceramics (both oxides and nonoxides), and (b) utilization of these principles in developing processes for several classes of advanced ceramics critical to present and future technology.
Download or read book Defects and Diffusion in Ceramics An Annual Retrospective VII written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2005-09-30 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This seventh volume in the series covering the latest results in the field includes abstracts of papers which appeared between the publication of Annual Retrospective VI (Volumes 226-228) and the end of July 2005 (journal availability permitting).
Download or read book Surfaces and Interfaces of Ceramic Materials written by L.C. Dufour and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the NATO Advanced Study Institute on Surfaces and Interfaces of Ceramic Materials, held on the Oleron island, France, in September 1988. This Institute was organized in nine months after receiving the agreement of the NATO Scientific Affairs Division. Despite this very short time, most of the lecturers contacted have accepted our invitation to prepare a specific talk. The meeting was held at "La Vieille Perrotine" on the Oleron island. This holiday village of the French CNRS is located near the Ocean in a natural area which contributed to create a very pleasant atmosphere favourable to develop interaction between the 91 participants in this Institute. First of all, the Institute was aimed at diffusing the foremost results on the characterization of and the role played by surfaces, grain boundaries and interfaces in preparation and overall properties of ceramic materials, mainly of oxide ceramics. Through its interdisciplinary character, the Institute was also aimed at developing interaction between scientists and engineers interested in basic and practical aspects of processing and use of ceramics.
Download or read book Defects and Diffusion in Ceramics IX written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2007-11-20 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defect and Diffusion Forum Vol. 268
Download or read book Defects and Diffusion in Ceramics written by and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sintering of Ceramics written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2007-07-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering of Ceramics provides the only comprehensive treatment of the theories and principles of sintering and their application to the production of advanced ceramics with the required target microstructure. Stemming from the author's bestselling text, Ceramic Processing and Sintering, this book includes additional material selected
Download or read book Defects and Diffusion in Ceramics X written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2008-11-04 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tenth volume in the series covering the latest results in the field includes abstracts of papers which have appeared since the publication of Annual Retrospective IX (Volume 268).
