Download or read book Diffusion in Carbon Allotropes written by David Fisher and published by Trans Tech Publications Ltd. This book was released on 2013-06-13 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Compilation Selected peer reviewed papers only.
Download or read book Diffusion in Carbon Allotropes written by and published by . This book was released on 2013 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon has always been an essential feature of human civilisation (not to mention the human constitution), whether as mere fuel, as an expensive bauble or as an essential component of those two supporting pillars (organic chemicals, steel) of the industrial revolution. Even since its recognition as an element, 2 1/4 centuries ago, it has never ceased to offer new surprises and properties. Just decades ago, students had to contend with only two main forms, graphite and diamond, but nowadays there is a plethora of nanotubes, fullerenes, graphenes, etc. The present volume offers a compilation (over 400 items) of data on mass diffusion, in all of the various known allotropes of carbon, spanning some 6 decades. Paragraph-long abstracts of 406 research articles examine diffusion in carbon generally, in C60 and C70, diamond, graphene, and graphite. Authors and key words are indexed. The volume is part of a permanent record of findings regarding the defect solid state.
Download or read book Carbon Allotropes written by Jeenat Aslam and published by CRC Press. This book was released on 2023-12-12 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of corrosion-resistant coatings using nanostructured materials is developing and growing at a very rapid rate. Carbon Allotropes: Advanced Anticorrosive Coatings Materials summarizes current research and technology on the significance of carbon allotropes in anticorrosive coatings. The book describes the synthesis, characterization, inhibitory mechanism, and industrial applications of carbon allotropes as a corrosion-resistant coating. The usage of carbon allotropes as nanostructure materials based on corrosion-resistant coatings used in contemporary industrial platforms is discussed in this book. Additionally, this book assesses the potential of carbon allotropes as the foundation for corrosion-resistant nanostructure materials and coatings. For scientists and engineers looking for cutting-edge ideas for nanostructures based on carbon allotropes as corrosion-resistant coating materials, this book is an invaluable resource. Salient Features This book covers nanostructured carbon allotropes as materials for corrosion-resistant coatings The use of carbon allotropes as anticorrosive has revolutionized modern industrial practices This offers academics and entrepreneurs an influential foundational, interdisciplinary, and primary literature reading The most cutting-edge coatings based on carbon allotropes are also highlighted, along with current manufacturing and operating challenges This maintains ongoing research on corrosion-resistant coatings using nanostructured materials while incorporating fresh advancements across the entire area
Download or read book Physics and Mechanics of New Materials written by Devrim Balkose and published by CRC Press. This book was released on 2024-11-29 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume covers new advances in materials science and engineering technology, focusing on practical rather than theoretical aspects that are useful for the design, fabrication, testing, and industrial application of advanced materials and structures. It provides an overview of modern ferrites with special attention to their structure, types, and properties, discusses the impact of technological change upon the application of selected materials and energy resources, and presents case studies in thermophysics and applied mechanics for engineering technology that illustrate the physical, chemical, and material properties of a range of modern materials.
Download or read book 15th International Meeting on Thermodiffusion written by Diversos autores and published by PUBLICACIONS UNIVERSITAT ROVIRA I VIRGILI. This book was released on 2023-06-16 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Meeting on Thermodiffusion provides a unique opportunity for sharing ideas about theoretical, experimental and numerical results on diffusion- and thermodiffusion related research. The successful series of IMT meetings aims to provide a forum for discussion, face-to-face interaction between scientists and technologists, and a mechanism for developing new collaborations. The IMT15 is aimed to discuss the latest results on transport properties in multicomponent fluids: innovative theoretical approaches, new experimental results and techniques as well as state of the art numerical methods. The most fundamental aspect of the conference will be the discussion amongst scientists, the sharing of ideas and creating new and reinforced existing collaborations.
Download or read book Handbook of Carbon Graphite Diamonds and Fullerenes written by Hugh O. Pierson and published by William Andrew. This book was released on 2012-12-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a review of the science and technology of the element carbon and its allotropes: graphite, diamond and the fullerenes. This field has expanded greatly in the last three decades stimulated by many major discoveries such as carbon fibers, low-pressure diamond, and the fullerenes. The need for such a book has been felt for some time. These carbon materials are very different in structure and properties. Some are very old (charcoal), others brand new (the fullerenes). They have different applications and markets and are produced by different segments of the industry.Few studies are available that attempt to review the entire field of carbon as a whole discipline. Moreover these studies were written several decades ago and a generally outdated since the development of the technology is moving very rapidly and scope of applications is constantly expanding and reaching into new fields such as aerospace, automotive, semiconductors, optics, and electronics. In this book the author provides a valuable, up-to-date account of both the newer and traditional forms of carbon, both naturally occurring and man-made. This volume will be a valuable resource for both specialists in, and occasional users of carbon materials.
Download or read book GraphITA written by Vittorio Morandi and published by Springer. This book was released on 2017-09-27 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the fourth edition of the GraphX conference series, GraphITA 2015. Its content range from fundamentals to applications of graphene and other 2D material such as silicene, BN and MoS2. The newest technological challenges in the field are described in this book, written by worldwide known scientists working with 2D materials.The chapter 'Morphing Graphene-Based Systems for Applications: Perspectives from Simulations' is published open access under a CC BY 4.0 license.
Download or read book Diffusion and Defect Data written by and published by . This book was released on 2002 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoporous Materials for Molecule Separation and Conversion written by Jian Liu and published by Elsevier. This book was released on 2020-07-04 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoporous Materials for Molecule Separation and Conversion cover the topic with sections on nanoporous material synthesis and characterization, nanoporous materials for molecule separation, and nanoporous materials for energy storage and renewable energy. Typical nanoporous materials including carbon, zeolite, silica and metal-organic frameworks and their applications in molecule separation and energy related applications are covered. In addition, the fundamentals of molecule adsorption and molecule transport in nanoporous materials are also included, providing readers with a stronger understanding of the principles and topics covered. This is an important reference for anyone exploring nanoporous materials, including researchers and postgraduate students in materials science and chemical engineering. In addition, it is ideal for industry professionals working on a wide range of applications for nanoporous materials. - Outlines the fundamental principles of nanoporous materials design - Explores the application of nanoporous materials in important areas such as molecule separation and energy storage - Gives real-life examples of how nanoporous materials are used in a variety of industry sector
Download or read book Graphene written by Mikhail I. Katsnelson and published by Cambridge University Press. This book was released on 2012-04-05 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important introduction to graphene, its physics and potentially significant applications, for graduate students, physicists and materials science researchers.
Download or read book Two Dimensional Carbon written by Wu Yihong and published by CRC Press. This book was released on 2014-04-09 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a brief introduction to the fundamental properties of graphene, this book focuses on synthesis, characterization and application of various types of two-dimensional (2D) nanocarbons ranging from single/few layer graphene to carbon nanowalls and graphene oxides. Three major synthesis techniques are covered: epitaxial growth of graphene on SiC, chemical synthesis of graphene on metal, and chemical vapor deposition of vertically aligned carbon nanosheets or nanowalls. One chapter is dedicated to characterization of 2D nanocarbon using Raman spectroscopy. It provides extensive coverage for applications of 2D carbon in energy storage including supercapacitor, lithium ion battery and fuel cells.
Download or read book Carbon Nanomaterials Sourcebook written by Klaus D. Sattler and published by CRC Press. This book was released on 2018-09-03 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Carbon Nanomaterials Sourcebook contains extensive, interdisciplinary coverage of carbon nanomaterials, encompassing the full scope of the field—from physics, chemistry, and materials science to molecular biology, engineering, and medicine—in two comprehensive volumes. Written in a tutorial style, this second volume of the sourcebook: Focuses on nanoparticles, nanocapsules, nanofibers, nanoporous structures, and nanocomposites Describes the fundamental properties, growth mechanisms, and processing of each nanomaterial discussed Explores functionalization for electronic, energy, biomedical, and environmental applications Showcases materials with exceptional properties, synthesis methods, large-scale production techniques, and application prospects Provides the tools necessary for understanding current and future technology developments, including important equations, tables, and graphs Each chapter is dedicated to a different type of carbon nanomaterial and addresses three main areas: formation, properties, and applications. This setup allows for quick and easy search, making the Carbon Nanomaterials Sourcebook: Nanoparticles, Nanocapsules, Nanofibers, Nanoporous Structures, and Nanocomposites a must-have reference for scientists and engineers.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1966 with total page 1492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Allotropes Metal Complex Chemistry Properties and Applications written by Boris Ildusovich Kharisov and published by Springer. This book was released on 2019-01-02 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed description of metal-complex functionalized carbon allotrope forms, including classic (such as graphite), rare (such as M- or T-carbon), and nanoforms (such as carbon nanotubes, nanodiamonds, etc.). Filling a void in the nanotechnology literature, the book presents chapters generalizing the synthesis, structure, properties, and applications of all known carbon allotropes. Metal-complex composites of carbons are described, along with several examples of their preparation and characterization, soluble metal-complex carbon composites, cost-benefit data, metal complexes as precursors of carbon allotropes, and applications. A lab manual on the synthesis and characterization of carbon allotropes and their metal-complex composites is included. Provides a complete description of all carbon allotropes, both classic and rare, as well as carbon nanostructures and their metal-complex composites; Contains a laboratory manual of experiments on the synthesis and characterization of metal-complex carbon composites; Discusses applications in diverse fields, such as catalysis on supporting materials, water treatment, sensors, drug delivery, and devices.
Download or read book Graphene and Carbon Nanotubes for Advanced Lithium Ion Batteries written by Stelbin Peter Figerez and published by CRC Press. This book was released on 2018-12-07 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title covers the fundamentals of carbon nanomaterials in a logical and clear manner to make concepts accessible to researchers from different disciplines. It summarizes in a comprehensive manner recent technological and scientific accomplishments in the area of carbon nanomaterials and their application in lithium ion batteries The book also addresses all the components anodes, cathodes and electrolytes of lithium ion battery and discusses the technology of lithium ion batteries that can safely operate at high temperature.
Download or read book Eco friendly Polymer Nanocomposites written by Vijay Kumar Thakur and published by Springer. This book was released on 2015-07-20 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains precisely referenced chapters, emphasizing environment-friendly polymer nanocomposites with basic fundamentals, practicality and alternatives to traditional nanocomposites through detailed reviews of different environmental friendly materials procured from different resources, their synthesis and applications using alternative green approaches. The book aims at explaining basics of eco-friendly polymer nanocomposites from different natural resources and their chemistry along with practical applications which present a future direction in the biomedical, pharmaceutical and automotive industry. The book attempts to present emerging economic and environmentally friendly polymer nanocomposites that are free from side effects studied in the traditional nanocomposites. This book is the outcome of contributions by many experts in the field from different disciplines, with various backgrounds and expertises. This book will appeal to researchers as well as students from different disciplines. The content includes industrial applications and will fill the gap between the research works in laboratory to practical applications in related industries.
Download or read book Carbon Dots written by Ya-Ping Sun and published by Springer Nature. This book was released on 2020-04-01 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the founder of the field of carbon “quantum” dots (carbon dots) and related technology, this book outlines the principles of carbon dots and presents strong evidence for that small carbon nanoparticles and by extension carbon dots represent the nanoscale carbon allotrope at zero-dimension. Historical accounts of the inception and evolution of the carbon dots field are provided. Experimental approaches and techniques for the dot synthesis and some related major issues are discussed in detail. The photoexcited state properties, especially the bright and colorful photoluminescence emissions, and photoinduced redox characteristics of carbon dots are presented, and so are their advantages over semiconductor quantum dots as well as fullerenes. Carbon dots are also compared with “graphene quantum dots”, for which a unified mechanistic understanding is proposed. Finally, a broad range of applications of carbon dots and their derived hybrid nanostructures in biomedical, renewable energy, food and environmental safety, and other technologies are highlighted. The book concludes with a discussion on the excellent potential and opportunities for further research and development.
