Download or read book Polymer Morphology written by Qipeng Guo and published by John Wiley & Sons. This book was released on 2016-05-16 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on structure-property relationships, this book describes how polymer morphology affects properties and how scientists can modify them. The book covers structure development, theory, simulation, and processing; and discusses a broad range of techniques and methods. • Provides an up-to-date, comprehensive introduction to the principles and practices of polymer morphology • Illustrates major structure types, such as semicrystalline morphology, surface-induced polymer crystallization, phase separation, self-assembly, deformation, and surface topography • Covers a variety of polymers, such as homopolymers, block copolymers, polymer thin films, polymer blends, and polymer nanocomposites • Discusses a broad range of advanced and novel techniques and methods, like x-ray diffraction, thermal analysis, and electron microscopy and their applications in the morphology of polymer materials

Download or read book Modulated Temperature Differential Scanning Calorimetry written by Mike Reading and published by Springer Science & Business Media. This book was released on 2006-10-12 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: MTDSC provides a step-change increase in the power of calorimetry to characterize virtually all polymer systems including curing systems, blends and semicrystalline polymers. It enables hidden transitions to be revealed, miscibility to be accurately assessed, and phases and interfaces in complex blends to be quantified. It also enables crystallinity in complex systems to be measured and provides new insights into melting behaviour. All of this is achieved by a simple modification of conventional DSC. In 1992 a new calorimetric technique was introduced that superimposed a small modulation on top of the conventional linear temperature program typically used in differential scanning calorimetry. This was combined with a method of data analysis that enabled the sample’s response to the linear component of the temperature program to be separated from its response to the periodic component. In this way, for the first time, a signal equivalent to that of conventional DSC was obtained simultaneously with a measure of the sample’s heat capacity from the modulation. The new information this provided sparked a revolution in scanning calorimetry by enabling new insights to be gained into almost all aspects of polymer characteristics. This book provides both a basic and advanced treatment of the theory of the technique followed by a detailed exposition of its application to reacting systems, blends and semicrystalline polymers by the leaders in all of these fields. It is an essential text for anybody interested in calorimetry or polymer characterization, especially if they have found that conventional DSC cannot help them with their problems.

Download or read book Differential Scanning Calorimetry of Polymers written by Vladimir Abramovich Bershteĭn and published by Prentice Hall. This book was released on 1994 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors show how DSC can be applied to various fields of polymers science where other methods have been unsuccessful. They discuss the ways in which DSC facilitates quantitative studies of the thermodynamic parameters and kinetics of melting, crystallization, liquid-crystallization, and different phase and relaxation transitions.

Download or read book Modulated Temperature Differential Scanning Calorimetry written by Mike Reading and published by Springer Science & Business Media. This book was released on 2006-02-22 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: MTDSC provides a step-change increase in the power of calorimetry to characterize virtually all polymer systems including curing systems, blends and semicrystalline polymers. It enables hidden transitions to be revealed, miscibility to be accurately assessed, and phases and interfaces in complex blends to be quantified. It also enables crystallinity in complex systems to be measured and provides new insights into melting behaviour. All of this is achieved by a simple modification of conventional DSC. In 1992 a new calorimetric technique was introduced that superimposed a small modulation on top of the conventional linear temperature program typically used in differential scanning calorimetry. This was combined with a method of data analysis that enabled the sample’s response to the linear component of the temperature program to be separated from its response to the periodic component. In this way, for the first time, a signal equivalent to that of conventional DSC was obtained simultaneously with a measure of the sample’s heat capacity from the modulation. The new information this provided sparked a revolution in scanning calorimetry by enabling new insights to be gained into almost all aspects of polymer characteristics. This book provides both a basic and advanced treatment of the theory of the technique followed by a detailed exposition of its application to reacting systems, blends and semicrystalline polymers by the leaders in all of these fields. It is an essential text for anybody interested in calorimetry or polymer characterization, especially if they have found that conventional DSC cannot help them with their problems.

Download or read book Thermal Analysis of Polymers written by Joseph D. Menczel and published by John Wiley & Sons. This book was released on 2014-07-09 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a solid introduction to thermal analysis, methods, instrumentation, calibration, and application along with the necessary theoretical background. Useful to chemists, physicists, materials scientists, and engineers who are new to thermal analysis techniques, and to existing users of thermal analysis who wish expand their experience to new techniques and applications Topics covered include Differential Scanning Calorimetry and Differential Thermal Analysis (DSC/DTA), Thermogravimetry, Thermomechanical Analysis and Dilatometry, Dynamic Mechanical Analysis, Micro-Thermal Analysis, Hot Stage Microscopy, and Instrumentation. Written by experts in the various areas of thermal analysis Relevant and detailed experiments and examples follow each chapter.

Download or read book Calorimetry and Thermal Analysis of Polymers written by Vincent B. F. Mathot and published by Hanser Gardner Publications. This book was released on 1994-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Differential Scanning Calorimetry written by Joseph D Menczel and published by Butterworth-Heinemann. This book was released on 2023-02-22 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: Differential scanning calorimetry (DSC) is the most important thermal analysis technique used today and the most common thermal analysis instrument found in chemical characterization laboratories. DSC has become an everyday tool in characterization laboratories, but many researchers using this technique have a limited understanding of the true breadth of its capabilities. Up to now, there has been no book that would describe the application of DSC in all the various areas of materials chemistry. The Handbook of Differential Scanning Calorimetry has been written to fill that void. This book is designed to summarize the knowledge of differential scanning calorimetry so that materials researchers and application chemists are given both a better understanding of techniques , as well as a review of the full scope of its capabilities. It also discusses how to properly interpret the DSC thermograms data obtained. Included in this work is the most up-to-date information written by some of the leaders in the field. It is written not only to help users get the most out of their equipment, After reading this book, people in all chemical and biological areas will have a broad overview of this measuring technique, and will be able to utilize this analytical technique more efficiently. Provides a detail description of the theory behind differential scanning while simultaneously providing a wider breadth of understanding of the actual DSC technique Includes a review of the basics of heat flux and power compensation DSC’s, as well as separate chapters on inorganic and organic materials Reviews the most common commercial DSC instruments on the market and their uses, including TA Instruments, Perkin-Elmer, Hitachi, Mettler Toledo, Netzsch, and Setaram

Download or read book Differential Scanning Calorimetry written by Günther Höhne and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this fully updated and revised second edition the authors provide the newcomer and the experienced practitioner with a balanced and comprehensive insight into all important DSC methods, including a sound presentation of the theoretical basis of DSC and TMDSC measurements. Emphasis is layed on instrumentation, the underlying measurement principles, metrologically correct calibrations, factors influencing the measurement process, and on the exact interpretation of the results. The information given enables the research scientist, the analyst and experienced laboratory staff to apply DSC methods successfully and to measure respective properties correctly.

Download or read book Thermal Analysis of Polymers written by M. P. Sepe and published by iSmithers Rapra Publishing. This book was released on 1997 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The techniques which are particularly relevant to polymer characterisation are evaluated in this new report. For each technique the author describes the method of operation and the output obtained, and then considers its application to polymer characterisation. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.

Download or read book Fast Scanning Calorimetry written by Christoph Schick and published by Springer. This book was released on 2016-06-28 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decades, the scan rate range of calorimeters has been extended tremendously at the high end, from approximately 10 up to 10 000 000 °C/s and more. The combination of various calorimeters and the newly-developed Fast Scanning Calorimeters (FSC) now span 11 orders of magnitude, by which many processes can be mimicked according to the time scale(s) of chemical and physical transitions occurring during cooling, heating and isothermal stays in case heat is exchanged. This not only opens new areas of research on polymers, metals, pharmaceuticals and all kinds of substances with respect to glass transition, crystallization and melting phenomena, it also enables in-depth study of metastability and reorganization of samples on an 1 to 1000 ng scale. In addition, FSC will become a crucial tool for understanding and optimization of processing methods at high speeds like injection molding. The book resembles the state-of-the art in Thermal Analysis & Calorimetry and is an excellent starting point for both experts and newcomers in the field.

Download or read book Assignment of the Glass Transition written by Rickey J. Seyler and published by ASTM International. This book was released on 1994 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermal Analysis of Polymeric Materials written by Krzysztof Pielichowski and published by John Wiley & Sons. This book was released on 2022-06-01 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt: An all-in-one reference work covering the essential principles and techniques on thermal behavior and response of polymeric materials This book delivers a detailed understanding of the thermal behavior of polymeric materials evaluated by thermal analysis methods. It covers the most widely applied principles which are used in method development to substantiate what happens upon heating of polymers. It also reviews the key application areas of polymers in materials science. Edited by two experts in the field, the book covers a wide range of specific topics within the aforementioned categories of discussion, such as: Crucial thermal phenomena - glass transition, crystallization behavior and curing kinetics Polymeric materials that have gained considerable interest over the last decade The latest advancements in techniques related to the field, such as modulated temperature DSC and fast scanning calorimetry The recent advances in hyphenated techniques and their applications Polymer chemists, chemical engineers, materials scientists, and process engineers can use this comprehensive reference work to gain clarity on the topics discussed within and learn how to harness them in practical applications across a wide range of disciplines.

Download or read book Thermal Properties of Green Polymers and Biocomposites written by Tatsuko Hatakeyama and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the reviews: "...This very well written new book is recommended to academic and industrial researchers and specialists interested in green polymers and mainly in their thermal properties...This new and opportune book covers some important properties of green polymers and bio-composites." (D. Feldman, Concordia University, Montreal, Canada)

Download or read book Shape Memory Polymers Blends and Composites written by Jyotishkumar Parameswaranpillai and published by Springer. This book was released on 2019-07-01 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the recent advances in the field of shape memory polymers, whose ease of manufacturing and wide range of potential applications have spurred interest in the field. The book presents details about the synthesis, processing, characterization, and applications of shape memory polymers, their blends and composites. It provides a correlation of physical properties of shape memory polymers with macro, micro and nano structures. The contents of this book will be of interest to researchers across academia and industry.

Download or read book Handbook of Thermal Analysis and Calorimetry written by Michael E. Brown and published by Elsevier Science. This book was released on 2003-12-22 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of a four volume set intended to describe the techniques and applications of thermoanalytical and calorimetric methods. The general techniques and methodology are covered extensively in Volume 1, along with the fundamental physicochemical background needed. Consequently the subsequent volumes dwell on the applications of these powerful and versatile methods, while assuming a familiarity with the techniques. Volume 2 covers major areas of inorganic materials and some related general topics, e.g., catalysis, geochemistry, and the preservation of art. The chapters are written by established practitioners in the field with the intent of presenting a sampling of the how thermoanalytical and calorimetric methods have contributed to progress in their respective areas. The chapters are not intended as exhaustive reviews of the topics, but rather, to illustrate to the readers what has been achieved and to encourage them to consider extending these applications further into their domains of interest. - Provides an appreciation for how thermal methods can be applied to inorganic materials and processes. - Provides an insight into the versatility of thermal methods. - Shares the experiences of experts in a variety of different fields. - A valuable reference source covering a huge area of materials coverage.

Download or read book Applications of Calorimetry in a Wide Context written by Amal Ali Elkordy and published by BoD – Books on Demand. This book was released on 2013-01-23 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Calorimetry, as a technique for thermal analysis, has a wide range of applications which are not only limited to studying the thermal characterisation (e.g. melting temperature, denaturation temperature and enthalpy change) of small and large drug molecules, but are also extended to characterisation of fuel, metals and oils. Differential Scanning Calorimetry is used to study the thermal behaviours of drug molecules and excipients by measuring the differential heat flow needed to maintain the temperature difference between the sample and reference cells equal to zero upon heating at a controlled programmed rate. Microcalorimetry is used to study the thermal transition and folding of biological macromolecules in dilute solutions. Microcalorimetry is applied in formulation and stabilisation of therapeutic proteins. This book presents research from all over the world on the applications of calorimetry on both solid and liquid states of materials.

Download or read book Thermal Methods of Polymer Analysis written by T.R Crompton and published by Smithers Rapra. This book was released on 2013-01-29 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the various thermal methods used for the characterisation of polymer properties and composition. All these methods study the properties of polymers as they change with temperature. The methods discussed in this book are: differential photocalorimetry, differential scanning calorimetry, dielectric thermal analysis, differential thermal analysis, dynamic mechanical analysis, evolved gas analysis, gas chromatography, gas chromatography combined with mass spectrometry, mass spectrometry, microthermal analysis, thermal volatilisation, thermogravimetric analysis and thermomechanical analysis. Each technique is discussed in detail and examples of the use of each technique are also given. Each chapter has an extensive list of references so that the reader can follow up topics of interest. This book will be a useful reference for those who already use any of these thermal methods but will also be of interest to undergraduates and those who are just starting to use these techniques.