Download or read book Diesel Particulate Filter Regeneration with an External Burner written by Kenneth Michael Follen and published by . This book was released on 2007 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Particulate matter has been identified by health agencies as a health risk and suspected of causing acute and chronic damage to the pulmonary and cardiovascular systems. Since diesel engines are well known for their soot production, legislation has been adopted to regulate the release of particulate matter into the atmosphere. As these emissions standards become increasingly stringent, new methods of emission control become necessary. Of the options currently available, particulate filters appear to be the most promising solution to meet and exceed these emission standards. Particulate traps have been shown to successfully filter out up to 90 % of particulate matter. However, as particulate traps filter particulate matter they become filled, resulting in an increase in the exhaust back pressure. To alleviate this increase in pressure, the filter must be regenerated, i.e. the particulate matter must be ignited and burned away leaving a clean trap. Of the current regeneration methods, active regeneration via an external burner is one of the more robust methods. The scope of this work is to design a fuel-fired heater for the purpose of supplying sufficient quantities of heat to elevate the exhaust temperature to the point at which diesel particulate filter (DPF) regeneration will occur. As a precursor to the design, an in-depth literature review on the current state of the art, as well as calculations of the design.
Download or read book Modern Engine Technology written by Richard Van Basshuysen and published by SAE International. This book was released on 2007-09-28 with total page 1071 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part dictionary, part encyclopedia, Modern Engine Technology from A to Z will serve as your comprehensive reference guide for many years to come. Keywords throughout the text are in alphabetical order and highlighted in blue to make them easier to find, followed, where relevant, by subentries extending to as many as four sublevels. Full-color illustrations provide additional visual explanation to the reader. This book features: approximately 4,500 keywords, with detailed cross-references more than 1,700 illustrations, some in full color in-depth contributions from nearly 100 experts from industry and science engine development, both theory and practice
Download or read book Particle Filter Retrofit for All Diesel Engines written by Andreas Mayer and published by expert verlag. This book was released on 2008 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development and Testing of a Burner Apparatus for Diesel Particulate Filter Regeneration written by Clark F. Paterson and published by . This book was released on 2006 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diesel Particulate Emissions Landmark Research 1994 2001 written by John H Johnson and published by SAE International. This book was released on 2002-02-20 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for manufacturers to meet U.S. Environmental Protection Agency (EPA) mobile source diesel emissions standards for on-highway light duty and heavy duty vehicles has been the driving force for the control of diesel particulate and NOx emissions reductions. Diesel Particulate Emissions: Landmark Research 1994-2001 contains the latest research and development findings that will help guide engineers to achieve low particulate emissions from future engines. Based on extensive SAE literature from the past seven years, the 45 papers in this book have been selected from the SAE Transactions Journals.
Download or read book Demonstration of a Diesel Fuel borne Catalyst System and Low NOx Control Technology for Reducing Particulate and NOx Emissions written by Michael D. Jackson and published by . This book was released on 2001 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Review of Technology Available to the Underground Mining Industry for Control of Diesel Emissions written by George H. Schnakenberg and published by . This book was released on 2002 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligence in a Small Materials World written by John A. Meech and published by DEStech Publications, Inc. This book was released on 2005 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers research for software and hardware developed to produce and process materials using higher-level automatic and intelligent systems.
Download or read book Catalysis and Automotive Pollution Control II written by A. Crucq and published by Elsevier. This book was released on 1991-11-20 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the proceedings of the second symposium on Catalysis and Automotive Pollution Control. CAPoC 2 was a great success from the point of view of its scientific interest, as evidenced by the content of this book, and also from the high participation, some 260 scientists. About two-thirds of the contributors came from the industrial world, mainly the car and oil industries and catalyst manufacturers. This is ample proof that exhaust catalysis remains a major topic of interest. The first part of the book is a general introduction to the problem of automotive pollution. The second, strictly catalytic, part is devoted to fundamental and applied studies on pollution control, with emphasis on exhaust catalytic converters.
Download or read book Science and Technology in Catalysis written by Masakazu Anpo and published by Gulf Professional Publishing. This book was released on 2003-07-09 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Selected) -- Plenary Lecures: New Catalysts for Controlled/Living Atom Transfer Radical Polymerization (ATRP; Catalysis and Applications of Gold Nanoparticles -- Oral Presentations: Ionic Liquids as New Solvents and Catalysis for Petrochemical and Refining Processes; High Throughput Experiment on the Investigation of Oxidation Catalysts with Gas Sensor System -- Poster Presentations: Development of a Low-Temperature Dioxin Decomposition Catalyst; Studies on Unique Properties of Polyolefins Prepared with Metallocene Catalyst Systems -- Index.
Download or read book Automotive Handbook written by Robert Bosch GmbH and published by John Wiley & Sons. This book was released on 2022-05-02 with total page 2051 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest edition of the leading automotive engineering reference In the newly revised Eleventh Edition of the Bosch Automotive Handbook, a team of accomplished automotive experts delivers a comprehensive and authoritative resource for automotive engineers, designers, technicians, and students alike. Since 1936, the Bosch Automotive Handbook has been providing readers with of-the-moment coverage of the latest mechanical and research developments in automotive technology, from detailed technical analysis to the newest types of vehicles. This newest edition is packed with over 2,000 pages of up-to-date automotive info, making it the go-to reference for both engineers and technicians. It includes detailed and simple explanations of automotive technologies and offers over 1,000 diagrams, illustrations, sectional drawings, and tables. Readers will also find: 200 pages of new content, including the electrification of the powertrain Additional coverage on new driver assistance systems and the automated detection of vehicles’ surroundings Updates on the on-board power supply for commercial vehicles New discussions of autonomous vehicles, as well as additional contributions from experts at automotive manufacturers, universities, and Bosch GmbH Perfect for design engineers, mechanics and technicians, and other automotive professionals, the latest edition of the Bosch Automotive Handbook will also earn a place on the bookshelves of car enthusiasts seeking a quick and up-to-date guide to all things automotive.
Download or read book Renewable Energy and Environmental Technology written by Mo Jie Sun and published by Trans Tech Publications Ltd. This book was released on 2013-10-31 with total page 5098 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 International Conference on Renewable Energy and Environmental Technology (REET 2013), September 21-22, 2013, Jilin, China. The 860 papers are grouped as follows: Chapter 1: Environmental Chemistry and Biology; Chapter 2: Environmental Materials; Chapter 3: Environmental Safety and Health; Chapter 4: Environmental Planning and Assessment; Chapter 5: Environmental Analysis and Monitoring; Chapter 6: Environmental Restoration Engineering; Chapter 7: Pollution Control Technology; Chapter 8: Waste Disposal and Recycling; Chapter 9: Ecological and Environmental Protection; Chapter 10: Forest Cultivation and Plant Protection; Chapter 11: Hydrology, Water Resources Engineering, Soil and Water Conservation; Chapter 12: Storage and Processing of Agricultural Products; Chapter 13: Water Supply and Drainage; Chapter 14: Green Building Materials, Architecture and Energy-Saving Technology; Chapter 15: Cleaner Production Processes; Chapter 16: Development and Utilization of Solar Energy; Chapter 17: Development and Utilization of Biomass Energy; Chapter 18: Development and Utilization of Wind Energy; Chapter 19: Nuclear Energy Engineering; Chapter 20: High Voltage and Insulation Technology; Chapter 21: Power Electronics and Power Drives; Chapter 22: Power Grid and Smart Grid Technologies; Chapter 23: Power System and Automation; Chapter 24: Power System Management; Chapter 25: Storage Technology and Energy-Saving Technology; Chapter 26: Energy Materials; Chapter 27: Energy Chemical Engineering; Chapter 28: New Energy Vehicles and Electric Vehicles; Chapter 29: Engineering Thermophysics and Thermal Engineering; Chapter 30: Research and Design of Machinery and Manufacture in Mechanical Engineering; Chapter 31: Data and Signal Processing, Measurements, Information Technology and Automation Technology; Chapter 32: Mineral Prospecting and Exploration; Chapter 33: Mining Engineering and Mineral Process Engineering; Chapter 34: Oil and Gas Well Development Projects; Chapter 35: Urban and Regional Planning; Chapter 36: Energy Strategy, Resources and Economic Development; Chapter 37: Ecological Economy, Circular Economy and Low-Carbon Economy; Chapter 38: Engineering Management and Engineering Education
Download or read book Diesel Engine System Design written by Qianfan Xin and published by Elsevier. This book was released on 2011-05-26 with total page 1087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diesel Engine System Design links everything diesel engineers need to know about engine performance and system design in order for them to master all the essential topics quickly and to solve practical design problems. Based on the author's unique experience in the field, it enables engineers to come up with an appropriate specification at an early stage in the product development cycle. Links everything diesel engineers need to know about engine performance and system design featuring essential topics and techniques to solve practical design problems Focuses on engine performance and system integration including important approaches for modelling and analysis Explores fundamental concepts and generic techniques in diesel engine system design incorporating durability, reliability and optimization theories
Download or read book Engine Emission Control Technologies written by G. Amba Prasad Rao and published by CRC Press. This book was released on 2020-06-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume covers the important issues related to environmental emissions from SI and CI engines as well as their formation and various pollution mitigation techniques. The book addresses aspects of improvements in engine modification, such as design modifications for enhanced performance, both with conventional fuels as well as with new and alternative fuels. It also explores some new combustion concepts that will help to pave the way for complying with new emission concepts. Alternative fuels are addressed in this volume to help mitigate harmful emissions, and alternative power sources for automobiles are also discussed briefly to cover the switch over from fueled engines to electrics, including battery-powered electric vehicles and fuel cells. The authors explain the different technologies available to date to overcome the limitations of conventional prime movers (fueled by both fossil fuels and alternative fuels). Topics examined include: • Engine modifications needed to limit harmful emissions • The use of engine after-treatment devices to contain emissions • The development of new combustion concepts • Adoption of alternative fuels in existing engines • Switching over to electrics—advantages and limitations • Specifications of highly marketed automobiles • Emission measurement methods
Download or read book Design and Development of Heavy Duty Diesel Engines written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on 2019-11-05 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as a comprehensive reference on the design and development of diesel engines. It talks about combustion and gas exchange processes with important references to emissions and fuel consumption and descriptions of the design of various parts of an engine, its coolants and lubricants, and emission control and optimization techniques. Some of the topics covered are turbocharging and supercharging, noise and vibrational control, emission and combustion control, and the future of heavy duty diesel engines. This volume will be of interest to researchers and professionals working in this area.
Download or read book Integrated Chemical Processes written by Kai Sundmacher and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to the entire field of integrated chemical processes, covering process design, analysis, operation and control of these processes. Both the editors and authors are internationally recognized experts from different fields in industry and academia, and their contributions describe all aspects of intelligent integrations of chemical reactions and physical unit operations such as heat exchange, separational operations and mechanical unit operations. As a unique feature, the book also introduces new concepts for treating different integration concepts on a generalized basis. Of great value to a broad audience of researchers and engineers from industry and academia.
Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 1999 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
